scholarly journals Design and Verification of Two-Stage Brake Pressure Servo Valve for Aircraft Brake System

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 979
Author(s):  
Lilei Zhang ◽  
Zhipeng Huang ◽  
Chengwei Fu ◽  
Yuepeng Xu ◽  
Yunhe Wang ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Performance Optimization ◽  
Simulation Analysis ◽  
High Sensitivity ◽  
Test System ◽  
Brake System ◽  
Two Stage ◽  
Valve Body ◽  
Servo Valve ◽  
Brake Pressure

Wheel braking devices is some of the most widely used landing deceleration devices in modern aircraft. Jet pipe pressure servo valves are widely used in large aircraft wheel brake control systems because of their high anti-pollution ability, high sensitivity and fast dynamic response. However, most brake systems suffer vibration phenomena during the braking process. The pressure servo valve is an important part of the hydraulic brake system, and also an important factor affecting the vibration of the system. In order to solve the vibration problem in the brake system this paper present a two-stage brake pressure servo valve design. We place feedback channels at both ends of the main spool to stabilize the output pressure. In addition, modeling, simulation and experimental verifications are carried out. Firstly, the principle and structure of the pressure servo valve are described. An accurate mathematical model of the two-stage brake pressure servo valve and the testing system is established. Then a simulation analysis is carried out. Finally, a two-stage brake pressure servo valve testing experimental platform system is built for experimental verification. The experimental results show that the mathematical model of the two-stage brake pressure servo valve and the test system established in this paper have high accuracy, and the designed servo valve structure can restrain vibrations. The above research results provide a useful theoretical reference for performance optimization, stability analysis and valve body structure improvement of brake pressure servo valves.

scholarly journals On the Dragging Trajectory of Anchors in Clay for Merchant Ships

2021 ◽  
Vol 9 (2) ◽  
pp. 118
Author(s):  
Xinqing Zhuang ◽  
Keliang Yan ◽  
Pan Gao ◽  
Yihua Liu
Keyword(s):  
Mathematical Model ◽  
Structural Integrity ◽  
Indirect Measurement ◽  
Test System ◽  
Flow Rule ◽  
Burial Depth ◽  
Proposed Model ◽  
Depth Increase ◽  
Two Parameters ◽  
The Mathematical Model

Anchor dragging is a major threat to the structural integrity of submarine pipelines. A mathematical model in which the mechanical model of chain and the bearing model of anchor were coupled together. Based on the associated flow rule, an incremental procedure was proposed to solve the spatial state of anchor until it reaches the ultimate embedding depth. With an indirect measurement method for the anchor trajectory, a model test system was established. The mathematical model was validated against some model tests, and the effects of two parameters were studied. It was found that both the ultimate embedding depth of a dragging anchor and the distance it takes to reach the ultimate depth increase with the shank-fluke pivot angle, but decrease as the undrained shear strength of clay increases. The proposed model is supposed to be useful for the embedding depth calculation and guiding the design of the pipeline burial depth.

scholarly journals Generation of Alternative Battery Allocation Proposals in Distribution Systems by the Optimization of Different Economic Metrics within a Mathematical Model

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1726
Author(s):  
Norberto Martinez ◽  
Alejandra Tabares ◽  
John F. Franco
Keyword(s):  
Mathematical Model ◽  
Distribution Systems ◽  
Net Present Value ◽  
Test System ◽  
Peak Time ◽  
Voltage Profile ◽  
Peak Reduction ◽  
Stochastic Variation ◽  
Peak Shaving ◽  
Technical Operation

Battery systems bring technical and economic advantages to electrical distribution systems (EDSs), as they conveniently store the surplus of cheap renewable generation for use at a more convenient time and contribute to peak shaving. Due to the high cost of batteries, technical and economic studies are needed to evaluate their correct allocation within the EDS. To contribute to this analysis, this paper proposes a stochastic mathematical model for the optimal battery allocation (OBA), which can be guided by the optimization of two different economic metrics: net present value (NPV) and internal rate of return (IRR). The effects of the OBA in the EDS are evaluated considering the stochastic variation of photovoltaic generation and load. Tests with the 33-node IEEE test system indicate that OBA results in voltage profile improvement (~1% at peak time), peak reduction (31.17%), increased photovoltaic hosting capacity (18.8%), and cost reduction (3.06%). Furthermore, it was found that the IRR metric leads to a different solution compared to the traditional NPV optimization due to its inherent consideration of the relation between cash flow and investment. Thus, both NPV and IRR-based allocation alternatives can be used by the decision maker to improve economic and technical operation of the EDS.

scholarly journals A two-stage amplified PZT sensor for monitoring lung and heart sounds in discharged pneumonia patients

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hongbin Chen ◽  
Shuai Yu ◽  
Haiyang Liu ◽  
Jie Liu ◽  
Yongguang Xiao ◽  
...  
Keyword(s):  
High Sensitivity ◽  
Cost Effective ◽  
High Ratio ◽  
Heart Sounds ◽  
Two Stage ◽  
Diagnosis And Prognosis ◽  
Sensor Device ◽  
Cost Effective Alternative ◽  
A Charge ◽  
Highly Sensitive Detection

AbstractAssessment of lung and heart states is of critical importance for patients with pneumonia. In this study, we present a small-sized and ultrasensitive accelerometer for continuous monitoring of lung and heart sounds to evaluate the lung and heart states of patients. Based on two-stage amplification, which consists of an asymmetric gapped cantilever and a charge amplifier, our accelerometer exhibited an extremely high ratio of sensitivity to noise compared with conventional structures. Our sensor achieves a high sensitivity of 9.2 V/g at frequencies less than 1000 Hz, making it suitable to use to monitor weak physiological signals, including heart and lung sounds. For the first time, lung injury, heart injury, and both lung and heart injuries in discharged pneumonia patients were revealed by our sensor device. Our sound sensor also successfully tracked the recovery course of the discharged pneumonia patients. Over time, the lung and heart states of the patients gradually improved after discharge. Our observations were in good agreement with clinical reports. Compared with conventional medical instruments, our sensor device provides rapid and highly sensitive detection of lung and heart sounds, which greatly helps in the evaluation of lung and heart states of pneumonia patients. This sensor provides a cost-effective alternative approach to the diagnosis and prognosis of pneumonia and has the potential for clinical and home-use health monitoring.

Finite Element Martensite Ratio Derivation on NiTi via Measurable Criteria of Strain Rate

2009 ◽  
Author(s):  
Abbas Amini ◽  
Hamid Mehdigholi ◽  
Mohammad Elahinia
Keyword(s):  
Mathematical Model ◽  
Strain Rate ◽  
Composite Structures ◽  
High Sensitivity ◽  
Smart Composite ◽  
Rate Dependency ◽  
Smart Composites ◽  
Measurable Amount ◽  
Macro Scale ◽  
Smart Composite Structures

The shape memory alloys (SMAs) and smart composites have a large use in high and low level industry, while a lot of research is being done in this field. The existence of smart composite structures is because of the advance mechanical benefits of the above materials. This work refers to dynamic and quasi static nonlinear explanation of these materials. After mathematical model consideration on the rate of strain, a model which is about martensite ratio of NiTi has been presented. This work has been done because of the high sensitivity of these materials to strain rate and use of visual and measurable engineering criteria to access other variables. As the martensite ratio is not engineering measurable amount, it needs to have macro scale property to measure this important nano scale criteria. Relative experiments are done to show the rate dependency of NiTi.

scholarly journals Clinical Value of Multiplexed Bead-Based Immunoassays for Detection of Autoantibodies to Nuclear Antigens

2007 ◽  
Vol 14 (5) ◽  
pp. 505-509 ◽  
Author(s):  
Erik Avaniss-Aghajani ◽  
Sophia Berzon ◽  
Arlen Sarkissian
Keyword(s):  
Lupus Erythematosus ◽  
Fluorescent Antibody ◽  
False Positive Rate ◽  
High Sensitivity ◽  
Test System ◽  
Lower Percentage ◽  
Clinical Value ◽  
Specificity And Sensitivity ◽  
Relative Specificity ◽  
Positive Results

ABSTRACT The advent of multiplexed bead assays in recent years has introduced a new dimension of testing for complex diseases such as lupus, which can involve multiple autoantibodies. The ability to rapidly identify multiple autoantibodies, with high sensitivity and specificity in an automated fashion, is highly attractive. The aim of this study was to assess the performance and clinical value of multiplexed bead-based (AtheNA Multi-Lyte ANA-II test system) immunoassays both by comparing the results with those achieved by indirect fluorescent-antibody assay (IFA) or conventional enzyme immunoassays (EIAs) and by independent identification of autoantibodies in well-characterized samples. To achieve this goal, 984 samples were tested for seven analytes (SS/A, SS/B, Sm, RNP, Scl-70, double-stranded DNA [dsDNA], and centromere B) in both traditional and bead-based assays. The average concordance for the different analytes was 91%, ranging from 81% (dsDNA) to 97% (centromere B). The average relative specificity and sensitivity for the analytes were also high, 92% and 81%, respectively. An examination of 93 “normal controls” demonstrated a 7% false-positive rate, which was comparable to IFA. Percentages of different autoantibodies found in patients with a variety of disease conditions (34 with calcinosis, Raynaud's phenomenon, esophageal dysmotility, sclerodactyly, and telangiectasia; 41 with mixed connective tissue disease; 24 with scleroderma; and 35 with Sjogren's syndrome) were well within the range expected from each group. A scrutiny of results from AtheNA and EIA and Farr results for 185 systemic lupus erythematosus samples revealed comparable results by both methods, with the exception of SS/A and dsDNA, where AtheNA had a higher percentage of SS/A-positive results compared to EIA (51% versus 29%) and a lower percentage of dsDNA-positive results (18% versus 28% at a cutoff of 5 IU/ml).

Design and Simulation of Capacitive Micromechaned Gyroscope

2011 ◽  
Vol 211-212 ◽  
pp. 909-913
Author(s):  
Yun Bo Shi ◽  
Xing Juan Zhao ◽  
Jun Tang ◽  
Jun Liu ◽  
Rui Rong Wang
Keyword(s):  
Atmospheric Pressure ◽  
Simulation Analysis ◽  
High Sensitivity ◽  
Drive Mode ◽  
Close Match ◽  
High Q ◽  
Air Damping ◽  
Large Numbers ◽  
Detection Mode ◽  
Micromachined Gyroscope

By researching and investigating the structure of capacitive gyroscopes, A novel capacitive micromachined gyroscope is proposed and the structure is designed. The method of electrostatic comber drive, capacitive detection of bar structure is used for the structure, and these make the gyroscope high sensitivity. The main air damping of the drive mode and detection mode is slide film damping, it is possible to make the gyroscope achieve high Q-values at atmospheric pressure. The decoupled gyroscope is designed, too. By large numbers of simulation analysis， frequencies of the first six steps mode are gained, nature frequencies of drive mode and sense mode of gyroscope are a close match, and rationality of the structure is validated. At last, the structure encapsulated is presented.

Mathematical Model to Evaluate and Optimize the Dynamic Performance of Pneumatic Brake System

2015 ◽  
Author(s):  
Jeevan N. Patil ◽  
Sivakumar Palanivelu ◽  
Vaibhav Aswar ◽  
Vipin Sharma
Keyword(s):  
Mathematical Model ◽  
Dynamic Performance ◽  
Brake System

scholarly journals Generalized optimizations of two-stage forging of micro/meso copper fastener

2018 ◽  
Vol 185 ◽  
pp. 00002
Author(s):  
Shih-Hsien Lin ◽  
Un-Chin Chai ◽  
Gow-Yi Tzou ◽  
Dyi-Cheng Chen
Keyword(s):  
Simulation Analysis ◽  
Effective Strain ◽  
Cold Forging ◽  
Two Stage ◽  
Forming Simulation ◽  
Multi Stage ◽  
Element Simulation ◽  
Die Stress ◽  
Stress Optimization ◽  
Forging Force

Three are generalized simulation optimizations considering the forging force, the die stress, and the dual-goals in two-stage forging of micro/meso copper fastener. Constant shear friction between the dies and workpiece is assumed to perform multi-stage cold forging forming simulation analysis, and the Taguchi method with the finite element simulation has been used for mold-and-dies parameters design simulation optimizations considering the forging force, die stress, and dual-goals. The die stress optimization is used to explore the effects on effective stress, effective strain, velocity field, die stress, forging force, and shape of product. The influence rank to forging process of micro/meso copper fastener for three optimizations can be determined, and the optimal parameters assembly consider die stress can be obtained in this study. It is noted that the punch design innovation can reduce the forging force and die stress.

Sign in / Sign up

Export Citation Format

Share Document