scholarly journals Markers for the Comparison of the Performances of Anoxic Biotrickling Filters in Biogas Desulphurisation: A Critical Review

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 567
Author(s):  
Emky Valdebenito-Rolack ◽  
Rosario Díaz ◽  
Felipe Marín ◽  
Daniel Gómez ◽  
Felipe Hansen
Keyword(s):  
Power Generation ◽  
Anaerobic Digestion ◽  
Cost Effective ◽  
Microbiological Analysis ◽  
Biotrickling Filters ◽  
Microbial Group ◽  
Foul Smell ◽  
Chemical Solutions ◽  
Uniform Assessment ◽  
Microbiological Indicators

The agriculture and livestock industry generate waste used in anaerobic digestion to produce biogas containing methane (CH4), useful in the generation of electricity and heat. However, although biogas is mainly composed of CH4 (~65%) and CO2 (~34%), among the 1% of other compounds present is hydrogen sulphide (H2S) which deteriorates engines and power generation fuel cells that use biogas, generating a foul smell and contaminating the environment. As a solution to this, anoxic biofiltration, specifically with biotrickling filters (BTFs), stands out in terms of the elimination of H2S as it is cost-effective, efficient, and more environmentally friendly than chemical solutions. Research on the topic is uneven in terms of presenting performance markers, underestimating many microbiological indicators. Research from the last decade was analyzed (2010–2020), demonstrating that only 56% of the reviewed publications did not report microbiological analysis related to sulphur oxidising bacteria (SOB), the most important microbial group in desulphurisation BTFs. This exposes fundamental deficiencies within this type of research and difficulties in comparing performance between research works. In this review, traditional and microbiological performance markers of anoxic biofiltration to remove H2S are described. Additionally, an analysis to assess the efficiency of anoxic BTFs for biogas desulphurisation is proposed in order to have a complete and uniform assessment for research in this field.

scholarly journals Optimization of Aeration Technique for the Reduction of Impurities (Corrosive Gases) from Biogas

1970 ◽  
Vol 46 (3) ◽  
pp. 339-342
Author(s):  
SMA Sujan ◽  
MS Bashar ◽  
M Rahaman ◽  
MN Haque ◽  
MY Miah ◽  
...  
Keyword(s):  
Power Generation ◽  
Hydrogen Sulfide ◽  
Anaerobic Digestion ◽  
Cost Effective ◽  
Gas Production ◽  
Biogas Plant ◽  
Air Injection ◽  
Injection Technique ◽  
Effective Power ◽  
Carbon Dioxide Co2

Biogas, produced from organic waste through anaerobic digestion (AD), is mainly composed of methane (CH4) and carbon dioxide (CO2) with smaller amount of hydrogen sulfide (H2S) and nitrogen (N2). Trace amount of some other gases are occasionally present in biogas. For electricity generation from biogas, reduction of H2S is necessary because it is toxic and corrosive to most of the equipments. Reduction of Hydrogen Sulfide (H2S) from poultry based biogas (normally it contents 1500~2500 ppm) can be done by dosing air/oxygen to the main digester during the digestion process. Two methods of air injection technique have been followed for optimization of the process. Firstly two hour interval air injection and secondly air injection based on percentage of hourly gas production. The optimum air percentage to minimize H2S should be at least 3.00%. After aeration H2S level comes to the desired level (<50ppm) within 1.5-2.0 hours and remains constant up to 7-9 hours and biogas can be used for effective power generation. A complete aeration system has been developed which is simple and cost effective for H2S reduction to the desired level from poultry based biogas plant. This system can be applied for any size of poultry based biogas plant for effective power generation. Key words: Anaerobic digestion; Hydrogen Sulfide (H2S); Aeration; Biogas digester; Power generation DOI: http://dx.doi.org/10.3329/bjsir.v46i3.9040 BJSIR 2011; 46(3): 339-342

Gasification as an optimum alternative for the sludge management

2011 ◽  
Vol 6 (4) ◽  
Author(s):  
C. Peregrina ◽  
J. M. Audic ◽  
P. Dauthuille
Keyword(s):  
Power Generation ◽  
Anaerobic Digestion ◽  
Sewage Sludge ◽  
Combined Heat And Power ◽  
Gas Production ◽  
Waste Reduction ◽  
Fluidised Bed ◽  
Sludge Management ◽  
Gas Cleaning ◽  
Cleaning System

Assimilate sludge to a fuel is not new. Sludge incineration and Combined Heat and Power (CHP) engines powered with sludge-derived anaerobic digestion gas (ADG) are operations widely used. However, they have a room of improvement to reach simultaneously a positive net power generation and a significant level of waste reduction and stabilization. Gasification has been used in other realms for the conversion of any negative-value carbon-based materials, that would otherwise be disposed as waste, to a gaseous product with a usable heating value for power generation . In fact, the produced gas, the so-called synthetic gas (or syngas), could be suitable for combined heat and power motors. Within this framework gasification could be seen as an optimum alternative for the sludge management that would allow the highest waste reduction yield (similar to incineration) with a high power generation. Although gasification remains a promising route for sewage sludge valorisation, campaigns of measurements show that is not a simple operation and there are still several technical issues to resolve before that gasification was considered to be fully applied in the sludge management. Fluidised bed was chosen by certain technology developers because it is an easy and well known process for solid combustion, and very suitable for non-conventional fuels. However, our tests showed a poor reliable process for gasification of sludge giving a low quality gas production with a significant amount of tars to be treated. The cleaning system that was proposed shows a very limited removal performance and difficulties to be operated. Within the sizes of more common WWTP, an alternative solution to the fluidised bed reactor would be the downdraft bed gasifier that was also audited. Most relevant data of this audit suggest that the technology is more adapted to the idea of sludge gasification presented in the beginning of this paper where a maximum waste reduction is achieved with a great electricity generation thanks to the use of a “good” quality syngas in a CHP engine. Audit show also that there is still some work to do in order to push sludge gasification to a more industrial stage. Regardless what solution would be preferred, the resulting gasification system would involve a more complex scenario compared to Anaerobic Digestion and Incineration, characterised by a thermal dryer and gasifier with a complete gas cleaning system. At the end, economics, reliability and mass and energy yields should be carefully analysed in order to set the place that gasification would play in the forthcoming processing of sewage sludge.

scholarly journals Assessment of Energy Transition Policy in Taiwan—A View of Sustainable Development Perspectives

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4402
Author(s):  
Chun-Kai Wang ◽  
Chien-Ming Lee ◽  
Yue-Rong Hong ◽  
Kan Cheng
Keyword(s):  
Climate Change ◽  
Power Generation ◽  
Sustainable Development ◽  
Energy Transition ◽  
Cost Effective ◽  
Adaptive Policy ◽  
Electricity Saving ◽  
Transition Policy ◽  
Development Perspective

Energy transition has become a priority for adaptive policy and measures taken in response to climate change around the world. This is an opportunity and a challenge for the Taiwan government to establish a climate-resilient power generation mixed to ensure electricity security as well as climate change mitigation. This study adopted a sustainable development perspective and applied optimal control theory to establish a cost-effective model to evaluate a long-term (2050), climate-resilient power generation mix for Taiwan. Furthermore, this study applies the STIRPAT approach to predict the demand of electricity by 2050 for the demand side management. The results not only showed the share of various power generation mixed, but also recommended the trajectory of electricity saving by 2050.

Experimental Study on a Double-Swirled Non-Premixed Humid Air/Syngas Burner

2013 ◽  
Author(s):  
Bing Ge ◽  
Shu-sheng Zang ◽  
Yinsheng Tian ◽  
Dong-fang Zhang ◽  
Yao-xin Cui ◽  
...  
Keyword(s):  
Power Generation ◽  
Nozzle Exit ◽  
Concentration Field ◽  
Cost Effective ◽  
Combined Cycle ◽  
Molar Ratio ◽  
Main Reaction ◽  
Oh Radicals ◽  
Integrated Gasification Combined Cycle ◽  
Coal Fuel

The development of integrated gasification combined cycle (IGCC) systems provides cost-effective and environmentally sound options for meeting future coal-utilizing power generation needs in the world. The combustion of gasified coal fuel significantly influences overall performance of IGCC power generation. Experimental measurements are carried out on a non-premixed model combustor, equipped with a double-swirled syngas burner. Planar laser-induced fluorescence (PLIF) of OH radical measurement is adopted to identify main reaction zones and burnt gas regions as well. Together with the temperature and emission measurements during the exhaust section, some important characteristics of the syngas flame are investigated overall. In this paper, the effects of the CO/H2 molar ratio consisting of syngas fuel are investigated under different humidity. With the increase of CO/H2 ratios, the concentration field of OH radicals is gradually away from the nozzle exit, and the nozzle exit almost no existence of OH radicals, forming a typical lifted flame. In addition, fluorescent signal strength of OH radicals pronounced weakening, the flame gradually appeared W type distribution and more and more obvious with the increased of humidification amount. At the same time the average exhaust temperature of combustor CO and NOx missions almost no change. The study can provide a reliable database for high moisture gas turbine combustor design and combustion numerical simulation.

scholarly journals Prediction of Wave Power Generation Using a Convolutional Neural Network with Multiple Inputs

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2097 ◽  
Author(s):  
Chenhua Ni ◽  
Xiandong Ma
Keyword(s):  
Neural Network ◽  
Power Generation ◽  
Convolutional Neural Network ◽  
Wave Height ◽  
Regression Models ◽  
Cost Effective ◽  
Wave Power ◽  
Marine Energy ◽  
Artificial Network ◽  
And Storage

Successful development of a marine wave energy converter (WEC) relies strongly on the development of the power generation device, which needs to be efficient and cost-effective. An innovative multi-input approach based on the Convolutional Neural Network (CNN) is investigated to predict the power generation of a WEC system using a double-buoy oscillating body device (OBD). The results from the experimental data show that the proposed multi-input CNN performs much better at predicting results compared with the conventional artificial network and regression models. Through the power generation analysis of this double-buoy OBD, it shows that the power output has a positive correlation with the wave height when it is higher than 0.2 m, which becomes even stronger if the wave height is higher than 0.6 m. Furthermore, the proposed approach associated with the CNN algorithm in this study can potentially detect the changes that could be due to presence of anomalies and therefore be used for condition monitoring and fault diagnosis of marine energy converters. The results are also able to facilitate controlling of the electricity balance among energy conversion, wave power produced and storage.

Renewable Hydrogen-Based Energy System for Supplying Power to Telecoms Base Station

2019 ◽  
Vol 43 ◽  
pp. 112-126 ◽  
Author(s):  
Doudou Nanitamo Luta ◽  
Atanda K. Raji
Keyword(s):  
Power Generation ◽  
Fossil Fuels ◽  
Storage System ◽  
Cost Effective ◽  
Energy System ◽  
Base Station ◽  
Oil Refining ◽  
Infrastructure Development ◽  
Low Carbon ◽  
Renewable Hydrogen

Hydrogen is likely to play a significant role in the concept of low-carbon power generation in support to renewable energy systems. It is abundant, eco-friendly, highly efficient and have the potential to be more cost-effective than fossil fuels provided that the engineering challenges associated with its safe infrastructure development, economical extraction and storage are solved. Presently, about 50 million metric tons of hydrogen is generated on a yearly basis, most of that is used for oil refining and ammoniac production. Other applications include electric vehicles, power to gas and power generation, etc. This study focuses on the use of hydrogen for power generation. The main goal is to investigate technical and economic performances of a renewable hydrogen-based energy system as an alternative to diesel generators for powering a remote telecoms base station. The proposed energy system consists of a photovoltaic generator, an electrolyser, a fuel cell, a hydrogen tank, a battery storage system and a power-conditioning unit. The system is simulated using Homer Pro software.

Steam Turbine Design Considerations for Ultrasupercritical Cycles

2010 ◽  
Author(s):  
Justin Zachary
Keyword(s):  
Power Generation ◽  
Cost Effective ◽  
Design Phase ◽  
Steam Turbines ◽  
Effective Solution ◽  
Technical Approach ◽  
Design Considerations ◽  
Balance Of Plant ◽  
Turbine Design ◽  
The Impact

The current coal-fired power generation market requires higher cycle efficiencies not only for economic reasons, but also as a means of reducing plant carbon footprint. To achieve these goals, the plant must operate at higher pressures and temperatures in the supercritical (SC) and ultrasupercritical (USC) domains. This paper describes Bechtel’s experience and challenges in regard to the conceptual design and integration of large steam turbines operating under these severe conditions. Several examples of projects are described wherein Bechtel applied this neutral but proactive technical approach in the development or design phase to achieve the best and most cost-effective solution for its customers. The topics presented also relate to steam cycle optimization in terms of plant output, steam conditions, number of reheat circuits, and type and number of heaters. The impact on balance of plant systems, including water treatment, availability, and redundancy criteria, is also addressed.

Sign in / Sign up

Export Citation Format

Share Document