scholarly journals Optimum Additive Composition to Minimize Fat in Functional Goat Meat Nuggets: A Healthy Red Meat Functional Food

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 475
Author(s):  
Tahreem Kausar ◽  
Mohd Adnan Kausar ◽  
Saif Khan ◽  
Shafiul Haque ◽  
Z. R. Azaz Ahmad Azad

Optimally designed functional foods are considered the most important part of a balanced and healthy diet. Goat meat nuggets, an otherwise healthy option, are packed with undesirable saturated and unsaturated fats. The present work suggests an optimal functional formulation to reduce the surplus fat content of goat meat nuggets by adding two optimally calculated functional ingredients, namely, fenugreek leaves (FL) and psyllium husk (PH). Response surface optimization was performed to determine the optimal content of the functional ingredients (FL and PH), resulting in minimum fat content without affecting the overall acceptability (OA) and other properties representing the taste and texture (e.g., ash content, pH, crude fiber content, and moisture content) of the nuggets. Functional additives at optimum levels successfully reduced the fat content of the weight-conserved nuggets by almost 39% compared with the control nuggets. Minimal and acceptable effects were observed regarding OA and other properties representative of the taste and texture of the nuggets. An optimally designed, fat-attenuated goat meat nugget formulation is therefore prescribed, which complies with the nutritional standards of a balanced diet.

2018 ◽  
Vol 7 (1) ◽  
pp. 12
Author(s):  
Utafiyani . ◽  
Ni Luh Ari Yusasrini ◽  
I Gusti Ayu Ekawati

This aims of this research was to know the effect of comparison between green bean flour and wheat flour on characteristic of analogue meatball and to know the right comparison of green bean flour and wheat flour to produce analogue meatball with the best characteristics. The design used in this research was completely randomized design (CRD) with the comparison between green bean flour and wheat flour i.e. (70 g :30 g), (60 g :40 g), (50 g :50 g), (40 g :60 g), and (30 g :70 g). Data were analysed by analysis of variance, followed by Duncan test. The result of this research showed that the comparison between green bean flours and wheat flour had no real effect on water content and aroma of analogue meatball, but significant effects were found on ash content, protein content, fat content, crude fiber content, texture, sensory characteristic such as color, flavour, texture, and overall acceptance of analogue meatball. The best characteristic of analogue meatball was comparison between green bean flour and wheat flour 30 g : 70 g i.e. 59.00 percent of water content, 1.34 percent of ash content, 6.88 percent of protein content, 1.77 percent of fat content, 1.77 percent of crude fiber content, level of elasticity 6.38 N, color (liked), aroma (neutral), texture (liked) with chewy characteristics, with the taste is rather not typical of green beans and liked, and overall acceptance (liked).


2020 ◽  
Vol 9 (2) ◽  
pp. 117
Author(s):  
Lucky Arisonna Roring ◽  
Ni Wayan Wisaniyasa ◽  
I Dewa Gede Mayun Permana

This study was aimed to determine the effect of wheat flour comparison with red bean sprout flour on the characteristics of pancakes and to determine the exact concentration of red bean sprout flour that was able to produce pancakes with the best characteristics. This study used a randomized block design with the ratio of flour and red bean sprouts (100%: 0%, 60%: 40%, 50%: 50%, 40%: 60%, 30%: 70%), repeated three times to obtain 15 units of experiment. The data obtained were then analyzed by variants and if there was any effect on the treatment, then continued with Duncan test. The variables observed were moisture content, ash content, protein content, fat content, carbohydrate levels, coarse fiber content, and sensory characteristics. The results showed that the addition of red bean sprout effected moisture content, ash content, protein content, fat content, carbohydrate content, crude fiber content, colour, aroma, taste, texture, and overall acceptance of pancake. The best characteristic of pancake substitution was 50% wheat flour and 50% red bean sprout flour that produced moisture content 36.14%, ash content 1.86%, fat content 24.15%, protein content 8.31%, carbohydrate content 29.53 %, crude fiber content 16.81%, light brown colour (liked), typical aroma of red beans (liked), soft texture (liked), flavour of red beans (liked), and overall acceptance (liked). Keywords: wheat flour, red bean sprouts, characteristics, pancakes.


2018 ◽  
Vol 7 (4) ◽  
pp. 156
Author(s):  
Ni Komang Sri Budihartini ◽  
I Dewa Gede Mayun Permana ◽  
Putu Timur Ina

The purpose of study were to find the optimum ratio of wheat flour with red rice bran to produce the best characteristics of dry noodle. The Completely Randomized Design was used in the research with treatment that is the ratio of flour with red rice bran which consist of 6 levels: 100%:0%; 95%:5%; 90%:10%; 85%:15%; 80%:20%; 75%:25%. The treatment was repeated 3 times to obtain 18 units of experiment. The data obtained were analyzed by variance and if the treatment had an effect on the observed variable then continued with Duncan Multiple Range Test (DMRT) test. The ratio of flour to red rice bran significantly influenced moisture, ash , fat, protein, carbohydrate, curde fiber content, inhibitor concentration (IC50), water absorption, color (scoring test), flavor (hedonic test), texture (hedonic test and scoring), taste (hedonic test) as well as overall acceptance (hedonic test) dry noodle.The ratio of wheat flour and red rice bran flour  (80%:20%) produces dry noodle with the best characteristics namely: 10.67% moisture content, ash content  2.91%, 1.09% fat content, 13.52% protein content, 71.80 % carbohydrate content, 4.15% crude fiber content, IC50 149.35 mg/ml, water absorption 223.23%, dark red color and rather liked color, rather liked flavor, elastic and rather liked texture, rather liked taste and rather liked overall acceptability.


1970 ◽  
Vol 8 (1) ◽  
pp. 147-152 ◽  
Author(s):  
D Bose ◽  
M Shams-Ud-Din

Chickpea (Cicer arietinim) husk was extracted by non-alkaline aqueous extraction process. The residual extracted husk was dried in a cabinet drier and finally ground. Both fresh husk and processed husk were analyzed for their composition. The processed husk (extracted ground husk) was incorporated into formulations of cracker biscuits at 0- 20% replacement levels of wheat flour and baking functionalities were evaluated. The studies on the effects of processed husk on biscuit’s qualities showed that the highest spread ratio of biscuits was achieved with 3% processed husk. Analysis of cracker biscuits containing various percentage of processed husk showed that biscuits with increasing level of processed husk had higher ash, fat, moisture and crude fiber content, while lower protein and total carbohydrate content. The amount of crude fiber content of biscuits significantly increased with the incorporation of processed husk when compared with conventional biscuits. The cracker biscuits containing various percentages of processed husks were evaluated for their sensory attributes. The results revealed that cracker biscuits containing 5% processed husk secured the highest score for overall acceptability among other substitution levels. Keywords: Chickpea husk; Cracker biscuits; Crude fiber; Baking propertiesDOI: 10.3329/jbau.v8i1.6412J. Bangladesh Agril. Univ. 8(1): 147-152, 2010


2017 ◽  
Vol 47 (2) ◽  
pp. 154-164 ◽  
Author(s):  
Devendra Kumar ◽  
Manish Kumar Chatli ◽  
Raghvendar Singh ◽  
Nitin Mehta ◽  
Pavan Kumar

Purpose The purpose of the present study was to investigate the effect of camel milk protein hydrolysates (CMPHs) on physico-chemical, sensory, colour profile and textural quality attributes of chevon patties. Design/methodology/approach Camel milk proteins were hydrolyzed with three different proteolytic enzymes, viz., alcalase (CMPH-A), α-chymotrypsin (CMPH-C) and papain (CMPH-P), and dried to powder form before further utilization. Four treatments were prepared with incorporation of CMPH, viz., CMPH 0 per cent (C), CMPH-A 0.09 per cent (T1), CMPH-C 0.06 per cent (T2) and CMPH-P 0.09 per cent (T3), in the product formulation. The developed goat meat patties were evaluated for physico-chemical (pH; emulsion stability, ES; cooking yield, CY; water activity, aw), instrumental colour and texture profile and sensory attributes. Findings The pH, moisture, fat and ES values of goat meat emulsions were comparable amongst treatments as well as with the control; however, treated emulsions had higher ES and moisture content. The pH and moisture per cent of cooked chevon patties varied significantly, whereas other physico-chemical (CY, aw, per cent protein, per cent fat, per cent ash and per cent dietary fibre) as well as dimensional parameters (per cent gain in height and decrease in diameter) were comparable amongst treatments and the control. Hardness, springiness, stringiness, cohesiveness, gumminess and resilience of chevon patties decreased significantly (p < 0.05) with the incorporation of CMPH than that of the control; however, the values were comparable among all the treated products. Protein hydrolysate in chevon patties resulted in significant increase in redness (a*) values, whereas all other parameters (L*, b* and hue) decreased significantly as compared to that of the control. The colour and appearance, texture, juiciness overall acceptability scores were comparable in all the treated products and were significantly (p < 0.05) higher than the control. The flavour scores of C, T1 and T3 were comparable but significantly lower than that of T2. The overall acceptability scores of T1 and T2 were also comparable and significantly higher than C and T3; however, the highest score was recorded for T2. Practical implications Results concluded that chevon patties with acceptable sensory attributes and improved CY and textural attributes can be successfully developed with the incorporation of CMPH. Originality/value The protein hydrolysates of different food proteins could be explored in a same pattern to find out their implication in food matrices.


2019 ◽  
Vol 8 (2) ◽  
pp. 140
Author(s):  
I Dewa Gede Dwi Agastia Utama ◽  
Ni Wayan Wisaniyasa ◽  
I Wayan Rai Widarta

This study aims to determine the effect of wheat flour ratio with corn sprouts flour on the characteristics of flakes produced and the exact composition of wheat flour with corn sprouts flour that is able to produce flakes with the best characteristics. The experimental design used was Completely Randomized Design with treatment factor that is the comparative treatment of flour with corn sprouts flour which consist of 5 levels: 50%:50%; 40%:60%; 30%:70%; 20%:80%; 10%:90%. The treatment was repeated 3 times to obtain 15 units of experiment. The data obtained were analyzed by variance and if the treatment had an effect on the observed variable then continued with Duncan test. The comparison of wheat flour with corn sprout flour significantly affected water content, ash content, fat content, protein content, carbohydrate content, coarse fiber content, tensile strength, color (hedonic test), aroma (hedonic test), texture (hedonic test and scoring ), taste (hedonic test) as well as overall acceptance (hedonic test) flakes. Comparison of 30% wheat flour : 70% corn sprouts flour produces flakes with the best characteristics, namely: water content was 2.94%, ash content was 2.99%, fat content was 11.60%, protein content was 14.40%, carbohydrate content was 68.08%, crude fiber content was 6.25%, tensile strength was 4.24 N, color liked, aroma some liked, texture crispy and liked, taste liked and overall acceptance liked.


2018 ◽  
Vol 7 (4) ◽  
pp. 175
Author(s):  
I Gusti Agung Ayu Sintia Padma Dewi ◽  
I Gusti Ayu Ekawati ◽  
I Desak Putu Kartika Pratiwi

The purpose of this research was to know the effect of germination time of millet (Panicum milliaceum) on the characteristics of flakes and to know the right germination time of millet on the characteristics of flakes. The experimental design used was completely randomized design with the germination time of millet treatment, namely 24 hours (T1), 48 hours (T2), 72 hours (T3), 96 hours (T4), and 120 hours (T5). The treatment was repeated 3 repetitions then obtained 15 units of the experiment, the data obtained from the result were analyzed by variance and if the treatment had an effect on the variable then continued with Duncan test. The results showed that the germination of millet had significant effect to water content, ash content, protein content, fat content, crude fiber content, tannin content, taste level (hedonic test), and overall acceptance of flakes. 120 hours germination time of millet had the best characteristics with water content 1,36%, ash content 2,65%, protein content 9,93%, fat content 7,86%, carbohydrate content 78,20%, crude fiber content 5,93, tannin content 0,31%, color liked, flavor liked, texture crispy and liked, taste liked  and overall acceptance liked.


Genes ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 717 ◽  
Author(s):  
Sayed Haidar Abbas Raza ◽  
Rajwali Khan ◽  
Sameh A. Abdelnour ◽  
Mohamed E. Abd El-Hack ◽  
Asmaa F. Khafaga ◽  
...  

This review considers the unique characteristics of Chinese cattle and intramuscular fat content (IMF) as factors influencing meat quality, including tenderness, flavor, and juiciness of meat. Due to its nutritional qualities, meat contributes to a healthy and balanced diet. The intramuscular fat content and eating quality of beef are influenced by many factors, which can generally be divided into on-farm and pre-slaughter factors (breed, sex of cattle, age at slaughter, housing system, diet, and pre-slaughter handling) and postmortem factors (post-slaughter processing, chilling temperature, and packaging). Meat quality traits can also be influenced by the individual genetic background of the animal. Worldwide, the function of genes and genetic polymorphisms that have potential effects on fattening of cattle and beef quality have been investigated. The use of DNA markers is recognized as a powerful and efficient approach to achieve genetic gain for desirable phenotypic characteristics, which is helpful for economic growth. The polymorphisms of the SIRT4, SIRT6, SIRT7, CRTC3, ABHD5, KLF6, H-FABP, and ELOVL6 genes for body and growth characteristics of cattle, and also for beef quality, are considered with the aim of highlighting the significance of beef intramuscular fat content, and that growth, body, and meat quality characteristics are polygenically regulated.


2017 ◽  
Vol 36 (04) ◽  
Author(s):  
M. Anna Anandh

Cooked sausages from goat meat (GM) with 20, 25 and 30 % levels of goat tripe (GT) were prepared and their quality evaluated. Cooked sausages prepared with 100% GM were used as control. Significant (p>0.05) increase was observed for pH, diameter shrinkage, drip loss, protein and fat contents in GT incorporated cooked sausages than control. However, significant (p> 0.05) reverse trends were observed for product yield and moisture content. Sensory evaluation scores for appearance and colour, flavor, tenderness, juiciness, binding and overall acceptability were highest for 20% GT incorporated cooked sausage, followed by 25% and 30% GT incorporated cooked sausages. Physico - chemical and sensory evaluation scores of 20 % GT incorporated cooked sausages were comparable with control goat meat sausage and the values did not differ significantly between them. Thus, it can be concluded that 80% GM and 20% GT can be used for preparation of cooked goat meat sausages without affecting quality and acceptability.


2020 ◽  
Vol 6 (2) ◽  
pp. 97
Author(s):  
Achmad Jaelani ◽  
Muhammad Irwan Zakir

Swamps forage generally have crude fiber content and tannin content which is quite high. Unlike the case with legumes which are high in protein content but crude fiber content, and tannins that are not too high compared to swamp forages. The presence of tannin in swamp forage, has an impact on palatability, digestibility and biological value of feed. In such a situation, modification of swamp forages with tree legumes is a promising alternative source of feed for goats.         Protein in small ruminant animals is generally degraded in the rumen before reaching the abomasum, where absorption of nutrients occurs. As a result, protein digestibility will be reduced because it is damaged during the journey to the abomasum, so there needs to be modification so that protein damage to the rumen can be reduced. One way is to create a protein protector that is able to protect protein by using tannin which is quite abundant in swamp forages. In addition to functioning as a protein protector, tannin is also useful as an anthelmintic agent (anti-parasite) in goats, so that it will reduce the occurrence of worm disease in goats so that it will reduce the use of worm parasitic drugs which will have an impact on goat performance.           The specific objectives of this study were to analyze the ability of a combination of swamp forage with modified legume as a complete feed granule with different tannin content on the quality of local carcass and goat meat          Trial feeding was carried out on 12 male local goats aged 1.5-2 years, body weight 33-35 kg. At this stage a modified swamp and legume forage in the form of granules was modified as a complete feed on the performance of local meat-producing goats. Parameters measured included: Carcass quality, physical and organoleptic quality of meat.          The results showed that the application of swamp forage and indigofera legume on male goats affected the cut weight and carcass percentage. Giving a combination of swamp forage with indigofera legume with different tannin content affects the physical properties of goat meat which includes cooking losses, water holding capacity, but does not affect the tenderness of meat, and pH. 


Sign in / Sign up

Export Citation Format

Share Document