scholarly journals Life Cycle Assessment of Renewable Reductants in the Ferromanganese Alloy Production: A Review

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 185
Author(s):  
Gerrit Ralf Surup ◽  
Anna Trubetskaya ◽  
Merete Tangstad
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Fossil Fuel ◽  
Sustainable Production ◽  
Sustainable Growth ◽  
Raw Material ◽  
Socioeconomic Impacts ◽  
Production Route ◽  
High Efficient

This study examined the literature on life cycle assessment on the ferromanganese alloy production route. The environmental impacts of raw material acquisition through the production of carbon reductants to the production of ferromanganese alloys were examined and compared. The transition from the current fossil fuel-based production to a more sustainable production route was reviewed. Besides the environmental impact, policy and socioeconomic impacts were considered due to evaluation course of differences in the production routes. Charcoal has the potential to substantially replace fossil fuel reductants in the upcoming decades. The environmental impact from current ferromanganese alloy production can be reduced by ≥20% by the charcoal produced in slow pyrolysis kilns, which can be further reduced by ≥50% for a sustainable production in high-efficient retorts. Certificated biomass can ensure a sustainable growth to avoid deforestation and acidification of the environment. Although greenhouse gas emissions from transport are low for the ferromanganese alloy production, they may increase due to the low bulk density of charcoal and the decentralized production of biomass. However, centralized charcoal retorts can provide additional by-products or biofuel and ensure better product quality for the industrial application. Further upgrading of charcoal can finally result in a CO2 neutral ferromanganese alloy production for the renewable power supply.

scholarly journals Methodology for the quantification of concrete sustainability

2018 ◽  
Vol 174 ◽  
pp. 01006 ◽  
Author(s):  
Břetislav Teplý ◽  
Tomáš Vymazal ◽  
Pavla Rovnaníková
Keyword(s):  
Decision Making ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Service Life ◽  
Circular Economy ◽  
Point Of View ◽  
Raw Material ◽  
Load Bearing Capacity ◽  
Sustainability Management

Efficient sustainability management requires the use of tools which allow material, technological and construction variants to be quantified, measured or compared. These tools can be used as a powerful marketing aid and as support for the transition to “circular economy”. Life Cycle Assessment (LCA) procedures are also used, aside from other approaches. LCA is a method that evaluates the life cycle of a structure from the point of view of its impact on the environment. Consideration is given also to energy and raw material costs, as well as to environmental impact throughout the life cycle - e.g. due to emissions. The paper focuses on the quantification of sustainability connected with the use of various types of concrete with regard to their resistance to degradation. Sustainability coefficients are determined using information regarding service life and "eco-costs". The aim is to propose a suitable methodology which can simplify decision-making in the design and choice of concrete mixes from a wider perspective, i.e. not only with regard to load-bearing capacity or durability.

The Life Cycle Assessment of a Polypropylene Product, Part A: Raw Materials, Manufacturing and Disposal Scenario

2014 ◽  
Vol 535 ◽  
pp. 515-518
Author(s):  
Karin Kandananond
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Manufacturing Process ◽  
Fossil Fuel ◽  
Raw Materials ◽  
Injection Molding Process ◽  
Molding Process ◽  
Two Phases ◽  
Product Part

The life cycle of a polypropylene stacking chair is assessed in order to represent the environmental impact of a plastic product. The analysis is categorized into two phases, manufacturing and disposing. The manufacturing process of a chair concerns a prime material, polypropylene (PP) granulate, an injection molding process and a resource, electricity. According to the assessment, the PP granulate seems to contribute the highest impact on the environment in term of the fossil fuel used. Afterwards, the landfill method is used in the disposal scenario of waste, and the analysis shows that the highest impact comes in the form of carcinogens followed by ecotoxicity.

scholarly journals Environmental Impact of Lumber Production using Life Cycle Assessment: A Case Study of the Production System in South-west Nigeria

2018 ◽  
Vol 3 (2) ◽  
Author(s):  
Femi K Owofadeju ◽  
Omeiza A Agbaje ◽  
Temitayo A Ewemoje
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Production System ◽  
Decision Support Tool ◽  
Milling Process ◽  
Wood Waste ◽  
Raw Material ◽  
Diesel Generator ◽  
Support Tool

Life Cycle Assessment (LCA) is a decision support tool that can be used to evaluate the potential environmental impact of a product system. Environmental impact associated with the production of (0.0508×0.1524×3.6576) m lumber referred to as “2by6” in the primary wood industry was evaluated. This assessment is a cradle to gate system with boundaries spanning from the point of raw material extraction in Osun state, to transportation of the lumber product to wood market in Ibadan, Oyo state. The study compared four production scenarios by varying haulage distance and energy source during production at two sawmill facilities located in Ife and Ikire in Osun state. Data obtained from the production system were analysed using GaBi6 software to estimate and classify the emissions into five impact categories. Life Cycle Impact Assessment result (LCIA) showed that Acidification Potential (AP), Global Warming Potential (GWP) and Smog Potential (SP) were the most significant impact indicators observed in the four production scenarios. AP (2.883, 3.352, 3.483, 3.951) kg H+ mole-Equiv, GWP (13.25, 14.44, 15.45, 16.65) kg CO2-Equiv and SP (1.86, 2.15, 2.24, 2.53) kg O3-Equiv. Scenario 4 which involved a longer transportation distance and employed a diesel generator for the milling process showed the least environmental performance. Processes that contributed significant impact were wood waste disposal method employed and the secondary transportation processes during logging activities. In order to achieve a better production system, practices that encourage less waste generation and the use of renewable energy were recommended.Keywords— LCA, lumber production, environmental impact, wood waste

scholarly journals An Environmental Evaluation of the Cut-Flower Supply Chain (Dendranthema grandiflora) Through a Life Cycle Assessment

Revista EIA ◽  
2019 ◽  
Vol 16 (31) ◽  
pp. 27-42 ◽  
Author(s):  
Carmen Alicia Parrado Moreno ◽  
Ricardo Esteba Ricardo Hernández ◽  
Héctor Iván Velásquez Arredondo ◽  
Sergio Hernando Lopera Castro ◽  
Christian Hasenstab --
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cut Flowers ◽  
Environmental Evaluation ◽  
Fertilizer Use ◽  
Transport Phase

Colombia is a major flower exporter of a wide variety of species, among which the chrysanthemum plays a major role due to its exporting volume and profitability on the international market. This study examines the major environmental impacts of the chrysanthemum supply chain through a life cycle assessment (LCA). One kg of stems export quality was used as the functional unit (FU). The study examines cut-flowers systems from raw material extraction to final product commercialization for two markets (London and Miami) and analyzes two agroecosystems: one certified system and one uncertified system. The transport phase to London resulted in more significant environmental impacts than the transport phase to Miami, and climate change (GWP100) category was significant in both cities, generating values of 9.10E+00 and 2.51E+00 kg CO2-eq*FU for London and Miami, respectively. Furthermore, when exclusively considering pre-export phases, the uncertified system was found to have a greater impact than the certified system with respect to fertilizer use (certified 1,448E-02 kg*FU, uncertified 2.23E-01 kg*FU) and pesticide use (certified 1.24 E-04 kg*FU, uncertified 2.24E-03 kg*FU). With respect to the crop management, eutrophication (EP) and acidification (AP) processes imposed the greatest level of environmental impact. Strategies that would significantly reduce the environmental impact of this supply chain are considered, including the use of shipping and a 50% reduction in fertilizer use.

scholarly journals Evaluation of Environmental Impact of Cement Production in Algeria Using Life Cycle Assessment

2015 ◽  
Vol 45 ◽  
pp. 79-84
Author(s):  
S. Boughrara ◽  
M. Chedri ◽  
K. Louhab
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cement Production ◽  
Dry Process ◽  
The Impact ◽  
Inputs And Outputs

The aim of this study is the use of Life Cycle Assessment, to evaluate the impact generated by cement manufactory situated in Sour EL Ghozlane town in Algeria country, which use the dry process to produce cement Portland. The LCA method is used for compiling and examining the inputs and outputs of energy, raw material and environmental impacts directly attributable to the manufacture and functioning of a product throughout its life. It is also used to determine element and energy contributing to each impact evaluated. Potentials impacts are evaluated using the SimaProV.7.1 software and IMPACT2000+ method in this study.

scholarly journals Life Cycle Assessment (LCA) of an Integrated Solar PV and Wind Power System in Vietnam

2020 ◽  
Vol 4 ◽  
pp. 36-47
Author(s):  
Quyen Le Luu ◽  
Binh Van Doan ◽  
Ninh Quang Nguyen ◽  
Nam Hoai Nguyen
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Wind Power ◽  
Emission Reduction ◽  
Ghg Emissions ◽  
Raw Material ◽  
Power Model ◽  
Solar Pv ◽  
Central Highland

In Vietnam, energy generation accounts for more than half of the national greenhouse gas (GHG) emission. This sector has tremendous potential for emission reduction through the exploitation of renewable energy resources. This study examines the environmental impact of grid-connected solar and wind power in Vietnam, with a focus on GHG emissions. A life cycle assessment was conducted for these purposes. A case study of an integrated 50 kWp solar photovoltaics (PV) and 6 kW wind power model in the Central Highland of Vietnam was selected to illustrate the environmental impact of solar and wind power in Vietnam. The environmental inflows and outflows were quantified from raw material extraction for manufacturing components of the model, such as the panels, turbines, inverters and subsidiary components, to the end of life of the model. OpenLCA software was used for the calculation, with background data from publications and free LCA databases. The results obtained indicate that the life cycle GHG emissions are 20 gCO2e/kWh of solar PV, 3.7 gCO2e/kWh of wind power, and the total emission of the model during its 25-year lifetime is 38.28 tCO2e. If solar and wind power replace grid power, the lifetime emission reduction of the integrated solar and wind power model would be 1.8 thousand tCO2e.

scholarly journals The Assessment of the Environmental Impact of Selected Plastics

2020 ◽  
Vol 8 (11) ◽  
pp. 420-425
Author(s):  
Lubica Bednarova ◽  
Romana Dobáková ◽  
Marián Lázár ◽  
Natália Jasminská ◽  
Tomáš Brestovič ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Present Article ◽  
Raw Material ◽  
Environmental Burden ◽  
Environmental Life Cycle Assessment ◽  
Material Extraction

The present article deals with a method of the environmental Life Cycle Assessment (LCA) as a tool for the evaluation of environmental burden of selected products. The assessment of the life cycle of individual products should be carried out while considering emissions released during production, use and disposal of products and during processes of raw material extraction, production of materials and energy, auxiliary processes or sub-processes.    

scholarly journals Analisis penilaian daur hidup produk screen printing

2020 ◽  
Vol 12 (3) ◽  
pp. 376
Author(s):  
Ade Astuti Widi Rahayu ◽  
Annisa Indah Pratiwi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Life Cycle Cost ◽  
Screen Printing ◽  
Chemical Elements ◽  
Efficiency Index ◽  
Raw Material ◽  
Added Value ◽  
Manufacturing Companies

Increasing consumer concern for environmental sustainability is getting bigger, with the issue of green marketing starting to shift from just as added value to being a priority. The emergence of the green consumer and the growing efforts to protect the environment, encourage the industry to consider the environmental impact caused by each of its activities. Industri screen printing is one of the manufacturing companies located in the Surya Cipta industrial area that produces Screen Printing products. In the process of making Screen Printing with one of the items produced, namely named sheet panel can not be separated from the main raw material and support that has chemical elements that have the potential to harm the environment. For this reason, it is necessary to do an evaluation and analysis to determine the value of the environmental impact produced by using the life cycle assessment and life cycle cost method with the support of simapro software so that the value of eco efficiency index (EEI) can be identified from sheet panel products. From this research, it is known that the value of each life cycle assessment and life cycle score is 58.1768704pt at a cost of USD USD 9389,1355 and the value of the eco efficiency index (EEI) sheet panel product is 0.3245, which means that the eco efficiency sheet is affordable but not environmentally friendly (not sustainable).

scholarly journals Environmental Benefit of Alternative Binders in Construction Industry: Life Cycle Assessment

Environments ◽  
2022 ◽  
Vol 9 (1) ◽  
pp. 6
Author(s):  
Girts Bumanis ◽  
Aleksandrs Korjakins ◽  
Diana Bajare
Keyword(s):  
Carbon Dioxide ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Co2 Emissions ◽  
Building Materials ◽  
Positive Impact ◽  
Environmental Benefits ◽  
Raw Material ◽  
Environmental Benefit

Carbon dioxide (CO2) emissions associated with Portland cement (PC) production is ranked as the highest among the construction materials and it is estimated that 8% of the worlds CO2 discharges is due to PC production. As an average, the production of PC clinker including calcination process generates 0.81 kg of carbon dioxide per one kg of cement. Hence, new approaches which limit the negative environmental impacts of cement production and are aimed at the development of advanced methodologies are introduced. Implementation of lower energy consumption materials in production, which could moderately substitute PC in binders, can be addressed as one of the probable methods in mitigating environmental risks. Therefore, alternative binders fit into the most promising solutions. Present research investigates the environmental impact of the building sector, if an alternative to PC binder is used. Life cycle assessment (LCA) was used in this research to assess the environmental impact of the alternative ternary gypsum-PC-pozzolan binder in the production of mortar, and the environmental benefits were calculated and compared to traditional cement-based building materials. Phosphogypsum was considered as a secondary raw material, as in the current approach it is collected in open stacks bringing environmental concerns. SimaPro LCA software with the Ecoinvent database was used for most of the calculation processes. Results indicate that with alternative binders up to 30% of energy can be saved and 57 wt.% of CO2 emissions can be reduced, bringing positive impact on the construction industries contribution to the environment.

scholarly journals An Evaluation of Recycled Polymeric Materials Usage in Denim with Lifecycle Assesment Methodology

2021 ◽  
Author(s):  
Sedef Uncu Aki ◽  
Cevza Candan ◽  
Banu Nergis ◽  
Neslihan Sebla Önder
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
World Economy ◽  
Polymeric Materials ◽  
Raw Material ◽  
Virgin Material ◽  
Material Input

Today, World economy is only 8.6% circular, which creates a huge potential in materials reuse. To close the Emission Gap by 2032, this percentage needs to be doubled. The circular economy ensures that with less virgin material input and fewer emissions. With the help of effective recycling technologies, virgin material use can be decreased and especially petroleum based materials impact can fall within planetary boundaries. This book chapter analyzes different chemical and biological recycling technologies, their advantages and challenges in denim production. Moreover, Life Cycle Assessment (LCA) analysis will be used to evaluate the environmental impact of recycled polymeric materials usage in denim fabrics. Finally, it concludes by challenges and the future of chemically recycled materials in denim production and opportunities to evaluate waste as a raw material to design circular systems.

Sign in / Sign up

Export Citation Format

Share Document