scholarly journals The Dynamics of Globally Unstable Air-Helium Jets and Its Impact on Jet Mixing Intensity

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1667
Author(s):  
Agnieszka Pawlowska ◽  
Andrzej Boguslawski
Keyword(s):  
Shear Layer ◽  
Scaling Law ◽  
Experimental Investigations ◽  
Global Mode ◽  
Jet Mixing ◽  
Mode Suppression ◽  
Wide Range ◽  
Mixing Intensity ◽  
Flow Oscillations ◽  
Global Modes

The paper presents experimental investigations of the low-density air-helium jets. The paper is aimed at the analysis of the flow conditions promoting the local absolute instability leading to global flow oscillations. A number of the test cases are analysed with a wide range of the shear layer thickness showing conditions favorable for the global modes and also mixing intensity triggered by such a regime. It is shown that high mixing intensity is determined not only by the global regime but also by the vortex pairing process. The results are compared with a recently proposed universal scaling law for an onset into the global mode. The results turn out to be far from this scaling law and the reasons for such discrepancies are discussed. The measurements show also that if the shear layer at the nozzle exit is thin enough the global modes are suppressed. The mechanism leading to the global mode suppression under such conditions is carefully analysed.

Numerical and experimental investigations of the shear layer between two parallel streams

1968 ◽  
Vol 33 (3) ◽  
pp. 591-616 ◽  
Author(s):  
R. D. Mills
Keyword(s):  
Shear Layer ◽  
Tangential Velocity ◽  
Transverse Component ◽  
Experimental Investigations ◽  
Wide Range ◽  
Two Dimensional Flow ◽  
Parallel Streams ◽  
Energy Equations ◽  
Laminar Shear ◽  
Good Agreement

The first-order laminar shear layer between two parallel streams has been calculated exactly for compressible and incompressible two-dimensional flow. Turbulent flow has been included by using Prandtl's hypothesis for the eddy viscosity. Results are presented for a wide range of the appropriate parameters. The problem is solved by writing the momentum and energy equations as a pair of coupled integral equations in Crocco variables; these are solved by the method of successive approximation after using a simple transformation to weaken the singularity at the outer edges of the boundary layer. This approach yields uniquely the shear stress and temperature as functions of the tangential velocityu. The so-called third boundary condition, derived by Ting (1959), is then readily satisfied in evaluating the transverse component of velocityvby quadrature. Experimental results are presented in the turbulent incompressible case. Good agreement with the exact theoretical results is obtained when one stream is much faster than the other, but this falls off as the speeds of the streams tend to equalize.

scholarly journals Low-Energy Electron Damage to Condensed-Phase DNA and Its Constituents

2021 ◽  
Vol 22 (15) ◽  
pp. 7879
Author(s):  
Yingxia Gao ◽  
Yi Zheng ◽  
Léon Sanche
Keyword(s):  
Condensed Phase ◽  
Genetic Material ◽  
High Energy ◽  
Dna Lesions ◽  
Low Energy ◽  
Experimental Investigations ◽  
Experimental Conditions ◽  
Strand Breaks ◽  
Sequence Of Events ◽  
Wide Range

The complex physical and chemical reactions between the large number of low-energy (0–30 eV) electrons (LEEs) released by high energy radiation interacting with genetic material can lead to the formation of various DNA lesions such as crosslinks, single strand breaks, base modifications, and cleavage, as well as double strand breaks and other cluster damages. When crosslinks and cluster damages cannot be repaired by the cell, they can cause genetic loss of information, mutations, apoptosis, and promote genomic instability. Through the efforts of many research groups in the past two decades, the study of the interaction between LEEs and DNA under different experimental conditions has unveiled some of the main mechanisms responsible for these damages. In the present review, we focus on experimental investigations in the condensed phase that range from fundamental DNA constituents to oligonucleotides, synthetic duplex DNA, and bacterial (i.e., plasmid) DNA. These targets were irradiated either with LEEs from a monoenergetic-electron or photoelectron source, as sub-monolayer, monolayer, or multilayer films and within clusters or water solutions. Each type of experiment is briefly described, and the observed DNA damages are reported, along with the proposed mechanisms. Defining the role of LEEs within the sequence of events leading to radiobiological lesions contributes to our understanding of the action of radiation on living organisms, over a wide range of initial radiation energies. Applications of the interaction of LEEs with DNA to radiotherapy are briefly summarized.

scholarly journals Low Power Cusped Field Thruster Developed for the Space-Borne Gravitational Wave Detection Mission in China

2021 ◽  
Vol 11 (14) ◽  
pp. 6549
Author(s):  
Hui Liu ◽  
Ming Zeng ◽  
Xiang Niu ◽  
Hongyan Huang ◽  
Daren Yu
Keyword(s):  
Low Power ◽  
Gravitational Wave ◽  
Attitude Control ◽  
High Efficiency ◽  
Experimental Investigations ◽  
Attitude Control System ◽  
Gravitational Wave Detection ◽  
Wave Detection ◽  
Wide Range ◽  
Institute Of Technology

The microthruster is the crucial device of the drag-free attitude control system, essential for the space-borne gravitational wave detection mission. The cusped field thruster (also called the High Efficiency Multistage Plasma Thruster) becomes one of the candidate thrusters for the mission due to its low complexity and potential long life over a wide range of thrust. However, the prescribed minimum of thrust and thrust noise are considerable obstacles to downscaling works on cusped field thrusters. This article reviews the development of the low power cusped field thruster at the Harbin Institute of Technology since 2012, including the design of prototypes, experimental investigations and simulation studies. Progress has been made on the downscaling of cusped field thrusters, and a new concept of microwave discharge cusped field thruster has been introduced.

Experimental Investigations on Aluminium Ultrasonic Welding Parameters

2014 ◽  
Vol 657 ◽  
pp. 306-310
Author(s):  
Lăcrămioara Apetrei ◽  
Vasile Rață ◽  
Ruxandra Rață ◽  
Elena Raluca Bulai
Keyword(s):  
Microstructural Analysis ◽  
Base Material ◽  
Welding Process ◽  
Ultrasonic Welding ◽  
Experimental Investigations ◽  
Welding Parameters ◽  
Material Structure ◽  
Welding Temperature ◽  
Wide Range ◽  
Made In

Research evolution timely tendencies, in the nonconventional technologies field, are: manufacture conditions optimization and complex equipments design. The increasing of ultrasonic machining use, in various technologies is due to the expanding need of a wide range materials and high quality manufacture standards in many activity fields. This paper present a experimental study made in order to analyze the welded zone material structure and welding quality. The effects of aluminium ultrasonic welding parameters such as relative energy, machining time, amplitude and working force were compared through traction tests values and microstructural analysis. Microhardness tests were, also, made in five different points, two in the base material and three in the welded zone, on each welded aluminium sample. The aluminum welding experiments were made at the National Research and Development Institute for Welding and Material Testing (ISIM) Timişoara. The ultrasonic welding temperature is lower than the aluminium melting temperature, that's so our experiments reveal that the aluminium ultrasonic welding process doesn't determine the appearance of moulding structure. In the joint we have only crystalline grains deformation, phase transformation and aluminium diffusion.

Why Non-Uniform Density Suppresses the Precessing Vortex Core

2013 ◽  
Author(s):  
Kilian Oberleithner ◽  
Steffen Terhaar ◽  
Lothar Rukes ◽  
Christian Oliver Paschereit
Keyword(s):  
Natural Gas ◽  
Vortex Core ◽  
Hydrodynamic Instability ◽  
Density Field ◽  
Density Stratification ◽  
Reacting Flow ◽  
Global Instability ◽  
Global Mode ◽  
Precessing Vortex Core ◽  
Flow Oscillations

Isothermal swirling jets undergoing vortex breakdown are known to be susceptible to self-excited flow oscillations. They manifest in a precessing vortex core and synchronized growth of large-scale vortical structures. Recent theoretical studies associate these dynamics with the onset of a global hydrodynamic instability mode. These global modes also emerge in reacting flows, thereby crucially affecting the mixing characteristics and the flame dynamics. It is, however, observed that these self-excited flow oscillations are often suppressed in the reacting flow, while they are clearly present at isothermal conditions. This study provides strong evidence that the suppression of the precessing vortex core is caused by density stratification created by the flame. This mechanism is revealed by considering two reacting flow configurations: The first configuration represents a detached steam-diluted natural gas swirl-stabilized flame featuring a strong precessing vortex core. The second represents a natural gas swirl-stabilized flame anchoring near the combustor inlet, which does not exhibit self-excited oscillations. Experiments are conducted in a generic combustor test rig and the flow dynamics are captured using PIV and LDA. The corresponding density fields are approximated from the seeding density using a quantitative light sheet technique. The experimental results are compared to the global instability properties derived from hydrodynamic linear stability theory. Excellent agreement between the theoretically derived global mode frequency and measured precession frequency provide sufficient evidence to conclude that the self-excited oscillations are, indeed, driven by a global hydrodynamic instability. The effect of the density field on the global instability is studied explicitly by performing the analysis with and without density stratification. It turns out that the significant change on instability is caused by the radial density gradients in the inner recirculation zone and not by the change of the mean velocity field. The present work provides a theoretical framework to analyze the global hydrodynamic instability of realistic combustion configurations. It allows relating the flame position and the resulting density field to the emergence of a precessing vortex core.

scholarly journals A Computational Survey of Semiconductors for Power Electronics

2019 ◽  
Author(s):  
Prashun Gorai ◽  
Robert McKinney ◽  
Nancy Haegel ◽  
Andriy Zakutayev ◽  
Vladan Stevanovic
Keyword(s):  
Thermal Conductivity ◽  
Power Electronics ◽  
Figure Of Merit ◽  
Large Scale ◽  
Lattice Thermal Conductivity ◽  
Consumer Products ◽  
Breakdown Field ◽  
Experimental Investigations ◽  
Wide Range ◽  
Screening Parameter

Power electronics (PE) are used to control and convert electrical energy in a wide range of applications from consumer products to large-scale industrial equipment. While Si-based power devices account for the vast majority of the market, wide band gap semiconductors such as SiC, GaN, and Ga2O3 are starting to gain ground. However, these emerging materials face challenges due to either non-negligible defect densities, or high synthesis and processing costs, or poor thermal properties. Here, we report on a broad computational survey aimed to identify promising materials for future power electronic devices beyond SiC, GaN, and Ga2O3. We consider 863 oxides, sulfides, nitrides, carbides, silicides, and borides that are reported in the crystallographic database and exhibit finite calculated band gaps. We utilize ab initio methods in conjunction with models for intrinsic carrier mobility, and critical breakdown field to compute the widely used Baliga figure of merit. We also compute the lattice thermal conductivity as a screening parameter. In addition to correctly identifying known PE materials, our survey has revealed a number of promising candidates exhibiting the desirable combination of high figure of merit and high lattice thermal conductivity, which we propose for further experimental investigations.

scholarly journals MEASURING DISPLACEMENT AND VELOCITY OF A STRIKER USING A RADIO-INTERFEROMETER

2019 ◽  
Vol 81 (1) ◽  
pp. 118-128
Author(s):  
V. V. Balandin ◽  
V. V. Balandin ◽  
V. V. Parkhachev
Keyword(s):  
High Speed ◽  
Radio Interferometer ◽  
Experimental Investigations ◽  
X Ray ◽  
Gas Gun ◽  
Impact Interaction ◽  
Ballistic Experiment ◽  
Wide Range ◽  
Series Of Experiments ◽  
Error Of Measurement

Investigating impact interaction of solid and deformed bodies with obstacles of various physical natures requires developing experimental methodologies of registering the parameters of the interaction process. In experimental investigations of impact interaction of solids, it is common practice to measure displacement of strikers as a function of time, as well as their velocity and deceleration. To determine the displacement and velocity of a striker, a radio-interferometric methodology of registering the displacement of its rear end is proposed. In contrast with the registration methods based on high-speed filming and pulsed X-ray photography, the method using a millimeter-range radio-interferometer provides continuous high-accuracy registering of the displacement of the rear end of a striker in a wide range of displacement values. To test the effectiveness of the methodology, a series of experiments have been conducted on registering the motion of a cylindrical striker of an aluminum alloy, fired from a 20mm-dia gas gun. The displacement of the striker was also monitored using high-speed filming. The results of measuring using the two methodologies differ within the limits of the error of measurement. Based on the results of the above experiments, it has been concluded that the methodology of determining the displacement and velocity of strikers in a ballistic experiment using a mm-range radio-interferometer makes it possible to measure practically continuously large displacements (100 mm and larger) to a safe accuracy. The present methodology can be used for measuring the displacement and velocity of the rear end of a striker interacting with obstacles of various physical natures (metals, ceramics, soils, concretes, etc.).

scholarly journals A scaled MP-PIC method for bubbling fluidization

2021 ◽  
Author(s):  
Xing Zhao ◽  
Yong Jiang ◽  
Fei Li ◽  
Wei Wang
Keyword(s):  
Fluidized Beds ◽  
Volume Fraction ◽  
Phase Particle ◽  
Scaling Law ◽  
Coarse Graining ◽  
Coarse Grained ◽  
Particle In Cell ◽  
Wide Range ◽  
Pic Method ◽  
Multi Phase

Coarse-grained methods have been widely used in simulations of gas-solid fluidization. However, as a key parameter, the coarse-graining ratio, and its relevant scaling law is still far from reaching a consensus. In this work, a scaling law is developed based on a similarity analysis, and then it is used to scale the multi-phase particle-in-cell (MP-PIC) method, and validated in the simulation of two bubbling fluidized beds. The simulation result shows this scaled MP-PIC can reduce the errors of solids volume fraction and velocity distributions over a wide range of coarse-graining ratios. In future, we expect that a scaling law with consideration of the heterogeneity inside a parcel or numerical particle will further improve the performance of coarse-grained modeling in simulation of fluidized beds.

scholarly journals Momentum and Energy Transport by Gravity Waves in Stochastically Driven Stratified Flows. Part I: Radiation of Gravity Waves from a Shear Layer

2007 ◽  
Vol 64 (5) ◽  
pp. 1509-1529 ◽  
Author(s):  
Nikolaos A. Bakas ◽  
Petros J. Ioannou
Keyword(s):  
Shear Flow ◽  
Shear Layer ◽  
Gravity Wave ◽  
Gravity Waves ◽  
Wave Energy ◽  
Energy Transport ◽  
Wave Spectrum ◽  
Internal Gravity Waves ◽  
Wave Interference ◽  
Wide Range

Abstract In this paper, the emission of internal gravity waves from a local westerly shear layer is studied. Thermal and/or vorticity forcing of the shear layer with a wide range of frequencies and scales can lead to strong emission of gravity waves in the region exterior to the shear layer. The shear flow not only passively filters and refracts the emitted wave spectrum, but also actively participates in the gravity wave emission in conjunction with the distributed forcing. This interaction leads to enhanced radiated momentum fluxes but more importantly to enhanced gravity wave energy fluxes. This enhanced emission power can be traced to the nonnormal growth of the perturbations in the shear region, that is, to the transfer of the kinetic energy of the mean shear flow to the emitted gravity waves. The emitted wave energy flux increases with shear and can become as large as 30 times greater than the corresponding flux emitted in the absence of a localized shear region. Waves that have horizontal wavelengths larger than the depth of the shear layer radiate easterly momentum away, whereas the shorter waves are trapped in the shear region and deposit their momentum at their critical levels. The observed spectrum, as well as the physical mechanisms influencing the spectrum such as wave interference and Doppler shifting effects, is discussed. While for large Richardson numbers there is equipartition of momentum among a wide range of frequencies, most of the energy is found to be carried by waves having vertical wavelengths in a narrow band around the value of twice the depth of the region. It is shown that the waves that are emitted from the shear region have vertical wavelengths of the size of the shear region.

Clocking the buildup dynamics of light-induced states through attosecond transient absorption spectrum

2021 ◽  
Author(s):  
Xiaoxia Wu ◽  
Shaofeng Zhang ◽  
Difa Ye
Keyword(s):  
Floquet Theory ◽  
Transient Absorption ◽  
Scaling Law ◽  
Time Lag ◽  
Time Dependent ◽  
Transient Absorption Spectroscopy ◽  
Transient Absorption Spectrum ◽  
Wide Range ◽  
Maximal Shift ◽  
Buildup Time

Abstract The buildup processes of the light-induced states (LISs) in attosecond transient absorption spectroscopy are studied by solving the time-dependent Schrödinger equation and compared with the quasistatic Floquet theory, revealing a time lag of the maximal shift and strongest absorbance of the LIS with respect to the zero delay that is referred to as the buildup time. We analytically derive a scaling law for the buildup time that confirms the numerical results over a wide range of detunings. Our theory verifies the commonly accepted scenario of nearly instantaneous response of matter to light if the pump field is blue-detuned, but some differences are found in the near-resonant and red-detuning cases. Implications of the buildup time in petahertz optoelectronics are discussed.

Sign in / Sign up

Export Citation Format

Share Document