scholarly journals Numerical Study of Single Taylor Bubble Movement Through a Microchannel Using Different CFD Packages

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1418
Author(s):  
Mónica F. Silva ◽  
João B. L. M. Campos ◽  
João M. Miranda ◽  
José D. P. Araújo
Keyword(s):  
Numerical Study ◽  
Piecewise Linear ◽  
Ansys Fluent ◽  
Taylor Bubble ◽  
Micro Scale ◽  
Software Packages ◽  
Wide Range ◽  
Gas Liquid Flow ◽  
Spurious Currents ◽  
Bubble Movement

A Computation Fluid Dynamics (CFD) study for micro-scale gas–liquid flow was performed by using two different software packages: OpenFOAM® and ANSYS Fluent®. The numerical results were compared to assess the capability of both options to accurately predict the hydrodynamics of this kind of system. The focus was to test different methods to solve the gas–liquid interface, namely the Volume of Fluid (VOF) + Piecewise Linear Interface Calculation (PLIC) (ANSYS Fluent®) and MULES/isoAdvector (OpenFOAM®). For that, a single Taylor bubble flowing in a circular tube was studied for different co-current flow conditions (0.01 < CaB < 2.0 and 0.01 < ReB < 700), creating representative cases that exemplify the different sub-patterns already identified in micro-scale slug flow. The results show that for systems with high Capillary numbers (CaB > 0.8) each software correctly predicts the main characteristics of the flow. However, for small Capillary numbers (CaB < 0.03), spurious currents appear along the interface for the cases solved using OpenFOAM®. The results of this work suggest that ANSYS Fluent® VOF+PLIC is indeed a good option to solve biphasic flows at a micro-scale for a wide range of scenarios becoming more relevant for cases with low Capillary numbers where the use of the solvers from OpenFoam® are not the best option. Alternatively, improvements and/or extra functionalities should be implemented in the OpenFOAM® solvers available in the installation package.

Baroclinic modon equilibria on the beta-plane: stability and transitions

2002 ◽  
Vol 468 ◽  
pp. 239-270 ◽  
Author(s):  
Z. KIZNER ◽  
D. BERSON ◽  
R. KHVOLES
Keyword(s):  
Circular Cylinder ◽  
Differential Rotation ◽  
Numerical Study ◽  
Piecewise Linear ◽  
Vertical Axis ◽  
Beta Plane ◽  
Wide Range ◽  
Coherent Vortex ◽  
The Stability ◽  
Geophysical Fluids

The objective of this work is a numerical study of the stability properties and the evolution of the eastward-travelling baroclinic modons – coherent vortex structures specific to stratified geophysical fluids where differential rotation (the β-effect) is of the essence. In the vortices under study, the initial dependence of the potential vorticity (PV) upon the streamfunction is piecewise-linear, the barotropic component is dipolar, the baroclinic component is circularly symmetric about the vertical axis, and the boundary of the trapped-fluid region (in which the vorticity contours are closed) is a circular cylinder. These modons are shown to be stable for a wide range of parameters. In two- and three-layer fluids, modons of this type are shown to be able to transit to even more durable states, in which the trapped-fluid area is oval in shape and the PV versus streamfunction dependence in this domain is nonlinear. Possible transition mechanisms and linkage between the circular and oval modons are discussed.

An Investigation of the Effect of interrupted fin arrangements on the Thermal Performance of a Heat Sink under a Free Convection Condition

2019 ◽  
Vol 7 (1) ◽  
pp. 43-53
Author(s):  
Abbas Jassem Jubear ◽  
Ali Hameed Abd
Keyword(s):  
Heat Transfer ◽  
Steady State ◽  
Natural Convection ◽  
Thermal Performance ◽  
Heat Sink ◽  
Numerical Study ◽  
Ansys Fluent ◽  
Fluent Software ◽  
Steady State Heat ◽  
Steady State Heat Transfer

The heat sink with vertically rectangular interrupted fins was investigated numerically in a natural convection field, with steady-state heat transfer. A numerical study has been conducted using ANSYS Fluent software (R16.1) in order to develop a 3-D numerical model.  The dimensions of the fins are (305 mm length, 100 mm width, 17 mm height, and 9.5 mm space between fins. The number of fins used on the surface is eight. In this study, the heat input was used as follows: 20, 40, 60, 80, 100, and 120 watts. This study focused on interrupted rectangular fins with a different arrangement and angle of the fins. Results show that the addition of interruption in fins in various arrangements will improve the thermal performance of the heat sink, and through the results, a better interruption rate as an equation can be obtained.

scholarly journals Strain Sensor via Wood Anomalies in 2D Dielectric Array

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov
Keyword(s):  
Higher Plants ◽  
Numerical Study ◽  
Reciprocal Lattice ◽  
Strain Sensing ◽  
Photonic Materials ◽  
Sensing Applications ◽  
Wide Range ◽  
Sensor Structure ◽  
Optical Behavior ◽  
Chlorophyll Absorption

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.

Numerical study of geometric morphing wings of the 1303 UCAV

2021 ◽  
pp. 1-17
Author(s):  
B. Nugroho ◽  
J. Brett ◽  
B.T. Bleckly ◽  
R.C. Chin
Keyword(s):  
Flight Control ◽  
Numerical Study ◽  
Aerodynamic Characteristics ◽  
Morphing Wing ◽  
Rolling Moment ◽  
Wide Range ◽  
Morphing Wings ◽  
Wing Geometry ◽  
Lift And Drag ◽  
Wing Morphing

ABSTRACT Unmanned Combat Aerial Vehicles (UCAVs) are believed by many to be the future of aerial strike/reconnaissance capability. This belief led to the design of the UCAV 1303 by Boeing Phantom Works and the US Airforce Lab in the late 1990s. Because UCAV 1303 is expected to take on a wide range of mission roles that are risky for human pilots, it needs to be highly adaptable. Geometric morphing can provide such adaptability and allow the UCAV 1303 to optimise its physical feature mid-flight to increase the lift-to-drag ratio, manoeuvrability, cruise distance, flight control, etc. This capability is extremely beneficial since it will enable the UCAV to reconcile conflicting mission requirements (e.g. loiter and dash within the same mission). In this study, we conduct several modifications to the wing geometry of UCAV 1303 via Computational Fluid Dynamics (CFD) to analyse its aerodynamic characteristics produced by a range of different wing geometric morphs. Here we look into two specific geometric morphing wings: linear twists on one of the wings and linear twists at both wings (wash-in and washout). A baseline CFD of the UCAV 1303 without any wing morphing is validated against published wind tunnel data, before proceeding to simulate morphing wing configurations. The results show that geometric morphing wing influences the UCAV-1303 aerodynamic characteristics significantly, improving the coefficient of lift and drag, pitching moment and rolling moment.

scholarly journals A Computational Study on the Role of Parameters for Identification of Thyroid Nodules by Infrared Images (and Comparison with Real Data)

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4459
Author(s):  
José R. González ◽  
Charbel Damião ◽  
Maira Moran ◽  
Cristina A. Pantaleão ◽  
Rubens A. Cruz ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thyroid Nodules ◽  
Numerical Study ◽  
Computational Study ◽  
Internal Heat ◽  
Heat Transfer Process ◽  
The Body ◽  
Physical Parameters ◽  
Infrared Sensors ◽  
Wide Range

According to experts and medical literature, healthy thyroids and thyroids containing benign nodules tend to be less inflamed and less active than those with malignant nodules. It seems to be a consensus that malignant nodules have more blood veins and more blood circulation. This may be related to the maintenance of the nodule’s heat at a higher level compared with neighboring tissues. If the internal heat modifies the skin radiation, then it could be detected by infrared sensors. The goal of this work is the investigation of the factors that allow this detection, and the possible relation with any pattern referent to nodule malignancy. We aim to consider a wide range of factors, so a great number of numerical simulations of the heat transfer in the region under analysis, based on the Finite Element method, are performed to study the influence of each nodule and patient characteristics on the infrared sensor acquisition. To do so, the protocol for infrared thyroid examination used in our university’s hospital is simulated in the numerical study. This protocol presents two phases. In the first one, the body under observation is in steady state. In the second one, it is submitted to thermal stress (transient state). Both are simulated in order to verify if it is possible (by infrared sensors) to identify different behavior referent to malignant nodules. Moreover, when the simulation indicates possible important aspects, patients with and without similar characteristics are examined to confirm such influences. The results show that the tissues between skin and thyroid, as well as the nodule size, have an influence on superficial temperatures. Other thermal parameters of thyroid nodules show little influence on surface infrared emissions, for instance, those related to the vascularization of the nodule. All details of the physical parameters used in the simulations, characteristics of the real nodules and thermal examinations are publicly available, allowing these simulations to be compared with other types of heat transfer solutions and infrared examination protocols. Among the main contributions of this work, we highlight the simulation of the possible range of parameters, and definition of the simulation approach for mapping the used infrared protocol, promoting the investigation of a possible relation between the heat transfer process and the data obtained by infrared acquisitions.

Heat transfer characteristics of nanofluids from a sinusoidal corrugated cylinder placed in a square cavity

2021 ◽  
pp. 095440622110272
Author(s):  
Salaika Parvin ◽  
Nepal Chandra Roy ◽  
Litan Kumar Saha ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Transfer Characteristics ◽  
Wide Range

A numerical study is performed to investigate nanofluids' flow field and heat transfer characteristics between the domain bounded by a square and a wavy cylinder. The left and right walls of the cavity are at constant low temperature while its other adjacent walls are insulated. The convective phenomena take place due to the higher temperature of the inner corrugated surface. Super elliptic functions are used to transform the governing equations of the classical rectangular enclosure into a system of equations valid for concentric cylinders. The resulting equations are solved iteratively with the implicit finite difference method. Parametric results are presented in terms of streamlines, isotherms, local and average Nusselt numbers for a wide range of scaled parameters such as nanoparticles concentration, Rayleigh number, and aspect ratio. Several correlations have been deduced at the inner and outer surface of the cylinders for the average Nusselt number, which gives a good agreement when compared against the numerical results. The strength of the streamlines increases significantly due to an increase in the aspect ratio of the inner cylinder and the Rayleigh number. As the concentration of nanoparticles increases, the average Nusselt number at the internal and external cylinders becomes stronger. In addition, the average Nusselt number for the entire Rayleigh number range gets enhanced when plotted against the volume fraction of the nanofluid.

Numerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank Degasser

2013 ◽  
Vol 762 ◽  
pp. 253-260 ◽  
Author(s):  
Shan Yu ◽  
Jyrki Miettinen ◽  
Seppo Louhenkilpi
Keyword(s):  
Carbon Steel ◽  
Liquid Steel ◽  
Gas Flow ◽  
Numerical Study ◽  
Vacuum Treatment ◽  
Medium Carbon Steel ◽  
Transfer Coefficients ◽  
Ansys Fluent ◽  
Medium Carbon ◽  
Cell Expression

The steelmaking field has been seeing an increased demand of reducing hydrogen and nitrogen in liquid steel before casting. This is often accomplished by vacuum treatment. This paper focuses on developing a numerical model to investigate the removal of hydrogen and nitrogen from the melt of medium carbon steel in a commercial vacuum tank degasser. An activity coefficient model and the eddy-cell expression are implemented in the ANSYS FLUENT code to compute the activities of related elements and mass transfer coefficients of hydrogen and nitrogen in liquid steel. Several cases are simulated to assess the effect of gas flow rate and initial nitrogen content in liquid steel on degassing process and the calculated results are compared with industrial measured data.

Nonlinear dynamic behaviour of guy cables in turbulent winds

2001 ◽  
Vol 28 (1) ◽  
pp. 98-110 ◽  
Author(s):  
Bruce F Sparling ◽  
Alan G Davenport
Keyword(s):  
Finite Element ◽  
Dynamic Behaviour ◽  
Aerodynamic Drag ◽  
Numerical Study ◽  
Horizontal Displacement ◽  
Wind Loading ◽  
Second Phase ◽  
Nonlinear Coupling ◽  
Wide Range ◽  
Cable Vibrations

Large amplitude cable vibrations are difficult to predict using linear theory due to the presence of sag in the suspended profile. A numerical study was therefore undertaken to investigate the dynamic behaviour of inclined cables excited by imposed displacements. To model the nonlinear nature of cable response, a time domain finite element approach was adopted using nonlinear catenary cable elements. Two types of horizontal displacement patterns were enforced at the upper end of the guy. In the first phase of the study, harmonic displacement histories with a wide range of forcing frequencies were considered. In the second phase, random enforced displacements were used to simulate the motion of a guyed mast in gusty winds. The influence of aerodynamic drag and damping forces was investigated by performing analyses under still air, steady wind, and turbulent wind conditions. It was found that nonlinear coupling of related harmonic response components was significant at certain critical frequencies, particular when the excitation was harmonic and acted in the plane of the guy. Positive aerodynamic damping was shown to effectively suppress resonant and nonlinear coupling response.Key words: cables, structural dynamics, wind loading, finite element method, nonlinear analysis, guyed towers.

PIECEWISE AFFINE SYSTEM MODELING AND CONTROL OF PWM CONVERTERS

2007 ◽  
Vol 16 (01) ◽  
pp. 113-128 ◽  
Author(s):  
FARZAD TAHAMI ◽  
BEHROOZ MOLAEI
Keyword(s):  
High Performance ◽  
Piecewise Linear ◽  
System Modeling ◽  
Synthesis Method ◽  
Operating Point ◽  
Approximation Technique ◽  
Piecewise Affine ◽  
Pwm Converters ◽  
Linear Controller ◽  
Wide Range

The averaged switch modeling approach is a powerful method for representing the behavior of a wide variety of converters through equivalent circuits. The model is not linear and it is common to perform a small signal linearization about an operating point and design a linear controller. Models obtained with such method involve considerable approximation and produce results that are limited for high performance controller designs. In this paper a piecewise affine approximation technique is introduced for modeling PWM converters. This model is much more precise in predicting the dynamic response of averaged nonlinear model comparing the linear model. This paper also presents a piecewise linear controller synthesis method for PWM converters described by the proposed PWA model. The proposed controller is very efficient and effective. The design method is well suited for converters having a wide range of variation about their operating point. A simulation example on buck-boost converter is presented to demonstrate the performance of the proposed method for modeling the dynamics of the converter and designing the appropriate controller.

scholarly journals Drops bouncing off macro-textured superhydrophobic surfaces

2017 ◽  
Vol 824 ◽  
pp. 866-885 ◽  
Author(s):  
Ali Mazloomi Moqaddam ◽  
Shyam S. Chikatamarla ◽  
Iliya V. Karlin
Keyword(s):  
Contact Time ◽  
Numerical Study ◽  
Three Dimensional ◽  
Superhydrophobic Surfaces ◽  
Nonlinear Behaviour ◽  
Textured Surfaces ◽  
Texture Density ◽  
Wide Range ◽  
Quantitative Manner ◽  
The Impact

Recent experiments with droplets impacting macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. Here we present a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantifies the roles played by various external and internal forces. For the first time, accurate three-dimensional simulations involving realistic macro-textured surfaces are performed. After demonstrating that simulations reproduce experiments in a quantitative manner, the study is focused on analysing the flow situations beyond current experiments. We show that the experimentally observed reduction of contact time extends to higher Weber numbers, and analyse the role played by the texture density. Moreover, we report a nonlinear behaviour of the contact time with the increase of the Weber number for imperfectly coated textures, and study the impact on tilted surfaces in a wide range of Weber numbers. Finally, we present novel energy analysis techniques that elaborate and quantify the interplay between the kinetic and surface energy, and the role played by the dissipation for various Weber numbers.

Sign in / Sign up

Export Citation Format

Share Document