scholarly journals Equilibrium, Kinetic and Thermodynamic Studies for Sorption of Phosphate from Aqueous Solutions Using ZnO Nanoparticles

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1397
Author(s):  
Tra Huong Do ◽  
Van Tu Nguyen ◽  
Quoc Dung Nguyen ◽  
Manh Nhuong Chu ◽  
Thi Cam Quyen Ngo ◽  
...  
Keyword(s):  
Zno Nanoparticles ◽  
Zno Nanorods ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Isothermal Adsorption ◽  
Adsorption Time ◽  
X Ray ◽  
Zno Nanomaterials

In this study, ZnO nanoparticles were fabricated by using the hydrothermal method for adsorption of phosphate from wastewater. The obtained ZnO nanorods were characterized by powder X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), specific surface area (BET) and energy dispersive X-ray spectroscopy (EDS). The ZnO materials were applied for adsorption of phosphate from water using batch experiments. The effects of pH (4–10), adsorption time (30–240 min), the amount of adsorbent (0.1–0.7 g/L) and initial concentration of phosphate (147.637–466.209 mg/L) on the adsorption efficiency were investigated. The optimum condition was found at pH = 5 and at an adsorption time of 150 min. The adsorption was fitted well with the Langmuir isotherm and the maximum adsorption capacity was calculated to be 769.23 mg/g. These results show that ZnO nanomaterial would highly promising for adsorbing phosphate from water. The adsorption of phosphate on ZnO nanomaterials follows the isothermal adsorption model of Langmuir, Tempkin and Freundlich with single-layer adsorption. There is weak interaction between the adsorbent and the adsorbate. Phosphate adsorption of the ZnO nanomaterials follows Lagergren’s apparent second-order kinetic model and was spontaneous and exothermic.

scholarly journals Removal of Uranyl Ion from Wastewater by Magnetic Adsorption Material of Polyaniline Combined with CuFe2O4

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Xinrui Feng ◽  
Shaoshuai Sun ◽  
Ge Cheng ◽  
Lei Shi ◽  
Xiangshan Yang ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Regeneration Ability ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Uranyl Ions ◽  
Adsorption Model ◽  
Isothermal Adsorption ◽  
High Maximum ◽  
Magnetic Adsorption ◽  
Order Kinetic Equation

The magnetic adsorption material of polyaniline (PANI) with amino functional group combined with CuFe2O4 (CuFe2O4/PANI nanocomposite) has been described in this work. It has been characterized by TEM, XRD, XPS, BET, FTIR, and VSM, respectively. Significantly, it exhibits extremely high maximum adsorption capacity (322.6 mg/g) for removal of uranyl ions from wastewater at a pH of 4. The adsorption process is consistent with the quasisecond-order kinetic equation, and the isotherm and kinetic data are accurately described by the Langmuir isothermal adsorption model. Furthermore, the magnetic CuFe2O4/PANI displays stable adsorption performance for uranyl ions after five cycles of recovery in acid medium, which indicates it possesses good recovery due to its magnetism and excellent regeneration ability for reusability.

scholarly journals Study on Adsorption Properties of Modified Corn Cob Activated Carbon for Mercury Ion

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4483
Author(s):  
Yuyingnan Liu ◽  
Xinrui Xu ◽  
Bin Qu ◽  
Xiaofeng Liu ◽  
Weiming Yi ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Physical Adsorption ◽  
Raw Material ◽  
Order Kinetic ◽  
Mercury Ions ◽  
Corn Cob ◽  
Adsorption Time ◽  
X Ray

In this study, corn cob was used as raw material and modified methods employing KOH and KMnO4 were used to prepare activated carbon with high adsorption capacity for mercury ions. Experiments on the effects of different influencing factors on the adsorption of mercury ions were undertaken. The results showed that when modified with KOH, the optimal adsorption time was 120 min, the optimum pH was 4; when modified with KMnO4, the optimal adsorption time was 60 min, the optimal pH was 3, and the optimal amount of adsorbent and the initial concentration were both 0.40 g/L and 100 mg/L under both modified conditions. The adsorption process conforms to the pseudo-second-order kinetic model and Langmuir model. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and Zeta potential characterization results showed that the adsorption process is mainly physical adsorption, surface complexation and ion exchange.

scholarly journals Efficient and Selective Adsorption of Gold Ions from Wastewater with Polyaniline Modified by Trimethyl Phosphate: Adsorption Mechanism and Application

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 652 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Wang ◽  
Zhang ◽  
Zhang
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Selective Adsorption ◽  
Interaction Mechanism ◽  
Single Layer ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Trimethyl Phosphate ◽  
Selective Recovery

The selective recovery of gold from wastewater is necessary because it is widely used in various fields. In this study, a new polymeric adsorbent (TP-AFC) was prepared by modifying polyaniline with trimethyl phosphate for the selective recovery of gold from wastewater. Bath experiments were carried out to explore the adsorption capacity and mechanism. The optimum pH of adsorption is 4. The adsorption equilibrium is reached at 840 min. The maximum adsorption capacity is 881 mg/g and the adsorption was a spontaneous endothermic process. The adsorption process fitted well with pseudo second-order kinetic and the Langmuir-models. The single-layer chemisorption governed the adsorption process. In addition, the application in wastewater indicated that the interfering ions had no effect on the adsorption of gold ions. TP-AFC has good selectivity. The interaction mechanism was mainly ion exchange and complexation. In general, TP-AFC was successfully prepared and has an excellent future in practical application.

Adsorption of Ni(II) by a thermo-sensitive colloid: methylcellulose/calcium alginate beads

2019 ◽  
Vol 68 (7) ◽  
pp. 495-508
Author(s):  
Zhongmin Li ◽  
Wanwan Wu ◽  
Wenyan Jiang ◽  
Guangtao Wei ◽  
Yunshang Li ◽  
...  
Keyword(s):  
Calcium Alginate ◽  
Adsorption Process ◽  
Alginate Beads ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Isothermal Adsorption ◽  
Calcium Alginate Beads ◽  
Lower Temperature ◽  
Kinetics And Isotherms

Abstract The adsorption of Ni(II) by a thermo-sensitive adsorbent of methylcellulose/calcium alginate beads (CAMCBs) was studied using batch adsorption tests to determine the adsorption process and properties, the effects of adsorbent dosage, initial concentration, adsorption time and temperature. The adsorption process was further investigated using kinetics, isotherms and thermodynamic methods. The kinetics and isotherms studies showed the adsorption of Ni(II) on CAMCBs was fitted by the pseudo-second-order kinetic model and Langmuir isothermal adsorption model, respectively. The thermodynamic parameters indicated that the adsorption process was spontaneous and exothermic at lower temperature, and the entropy of the adsorption process was negative. In the study of regeneration, it was confirmed that under the temperature of 60 °C, the desorption agent of CaCl2 with concentration of 3 g·L−1 was more conducive to the desorption of Ni(II) from CAMCBs. Both adsorption capacity and mechanical strength of the used CAMCBs could be basically recovered to the level of fresh CAMCBs after desorption. The prepared CAMCBs had a good property of adsorption of Ni(II) and an excellent regeneration performance.

scholarly journals Mechanosynthesis of MFe2O4 (M = Co, Ni, and Zn) Magnetic Nanoparticles for Pb Removal from Aqueous Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
America R. Vazquez-Olmos ◽  
Mohamed Abatal ◽  
Roberto Y. Sato-Berru ◽  
G. K. Pedraza-Basulto ◽  
Valentin Garcia-Vazquez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Xrd Analysis ◽  
Maximum Adsorption Capacity ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
X Ray ◽  
Isotherm Adsorption ◽  
Crystallite Sizes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively.

scholarly journals Determination of Phthalate Esters in Beverages and Water Samples by Solid Phase Extraction with Resin Based COFs as Filler

Water ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 3338
Author(s):  
Yunjie Ma ◽  
Xin Gao ◽  
Yang Ruan ◽  
Hang Cui ◽  
Li Zhang ◽  
...  
Keyword(s):  
Solid Phase Extraction ◽  
Solid Phase ◽  
Phthalate Esters ◽  
Adsorption Behavior ◽  
Phthalate Ester ◽  
Phase Extraction ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Isothermal Adsorption ◽  
Kinetic Adsorption

Resin based covalent organic framework material was used as filler for solid phase extraction (SPE), and the solid phase extraction effect was compared with that of traditional COF material (TpBD COFs). The enrichment capacity of four phthalate esters (dimethyl phthalate, diethyl phthalate, dibutyl phthalate, dioctyl phthalate) in beverage samples was investigated by SPE. Adsorption experiments showed that the kinetic adsorption behavior of COF materials for phthalate esters (PAEs) was more consistent with the quasi-second-order kinetic adsorption model, and the static adsorption behavior is more in line with the Freundlich isothermal adsorption model. Solid phase extraction experiments proved that the SPE column prepared with two COF materials as adsorbents had good adsorption effects, high recovery (water: 97.99–100.56% and beverage: 97.93–100.23%) and were reusable (50 cycles), which could meet the requirements for trace detection of phthalate ester. It was found that the solid phase extraction effect was better than the four types of commercial SPE columns. The new COF material reduced the cost of monomer use and provided the possibility for its industrial production. Meanwhile, it also provided a new feasible scheme for enriching trace phthalate esters in practical samples.

scholarly journals Microwave-assisted preparation of manganese dioxide modified activated carbon for adsorption of lead ions

2020 ◽  
Author(s):  
Heng Yan ◽  
Wenhai Hu ◽  
Song Cheng ◽  
Hongying Xia ◽  
Quan Chen ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Manganese Dioxide ◽  
Microwave Heating ◽  
Metal Ion ◽  
Adsorption Mechanism ◽  
Lead Ions ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Fast Heating

Abstract In this study, manganese dioxide was evenly distributed on the surface of activated carbon (AC), and the porous structure of AC and the surface functional groups of manganese dioxide were used to adsorb the heavy metal ion Pb(II). The advantages of microwave heating are fast heating and high selectivity. The mole ratio control of the AC and MnO2 in 1:0.1, microwave heating to 800 °C, heat preservation for 30 min. The maximum adsorption capacity of the MnO2-AC prepared by this method on Pb(II) can reach 664 mg/L at pH = 6. It can be observed by SEM that manganese dioxide particles are dispersed evenly on the surface and pore diameter of AC, and there is almost no agglomeration. The specific surface area was 752.8 m2/g, and the micropore area was 483.9 m2/g. The adsorption mechanism was explored through adsorption isotherm, adsorption kinetics, FTIR, XRD, XPS. It is speculated that the adsorption mechanism includes electrostatic interaction and specific adsorption, indicating that lead ions enter into the void of manganese dioxide and form spherical complexes. The results showed that the adsorption behavior of Pb(II) by MnO2-AC was consistent with the Langmuir adsorption model, the quasi-second-order kinetic model, and the particle internal diffusion model.

scholarly journals Steel slag as low-cost adsorbent for the removal of phenanthrene and naphthalene

2018 ◽  
Vol 36 (3-4) ◽  
pp. 1160-1177 ◽  
Author(s):  
Liyun Yang ◽  
Xiaoming Qian ◽  
Zhi Wang ◽  
Yuan Li ◽  
Hao Bai ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Steel Slag ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Obvious Effect ◽  
X Ray ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model

This study investigates the removal effectiveness and characteristics of phenanthrene and naphthalene using low-cost steel slag with batch experiments. The adsorption characteristics of steel slag were measured and analysed using X-ray fluorescence, X-ray diffraction, and Fourier transform infrared spectroscopy. The batch experiments investigated the effect of the time gradient, pH, and steel slag dosage gradient on the adsorption of the steel slag. The results show that with time and dosage of steel slag increased, the adsorption capacity of phenanthrene and naphthalene increased and gradually became balanced, but pH had no obvious effect on the adsorption of phenanthrene and naphthalene. The Langmuir isotherm model best describes the phenanthrene and naphthalene removal by the steel slag, which shows the adsorption occurring in a monolayer. The maximum adsorption capacity of the steel slag to phenanthrene and naphthalene is 0.043 and 0.041 mg/g, respectively. A pseudo-first-order kinetic model can better represent the adsorption of phenanthrene and naphthalene by steel slag. The research demonstrates that the steel slag has a certain adsorption capacity for phenanthrene and naphthalene.

scholarly journals Removal of aqueous Cu2+ ions with Fe0/C ceramsites fabricated by direct reduction roasting of magnetite, coal, and paper mill sludge

2018 ◽  
Vol 78 (8) ◽  
pp. 1753-1761
Author(s):  
Pingfeng Fu ◽  
Zihao Chen ◽  
Tianwen Yang
Keyword(s):  
Direct Reduction ◽  
Paper Mill ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Reduction Roasting ◽  
Mass Ratio ◽  
Solution Ph ◽  
Paper Mill Sludge ◽  
X Ray ◽  
Initial Ph

Abstract The porous metallic iron/carbon (Fe0/C) ceramsites, with virtues of low cost and ‘green’ fabrication, were prepared by direct reduction roasting of magnetite, coal, and paper mill sludge. The X-ray diffraction data revealed that Fe0 was generated in situ by reducing the magnetite at 1,200 °C. Scanning electron microscopy with energy-dispersive X-ray spectroscopy indicated that Fe0 particles, with a size of <10 μm, were highly dispersed on carbon particles to form an integrated anode (Fe0) and cathode (C) structure of microelectrolysis filters. The effects of initial solution pH and Fe/C mass ratio on Cu2+ removal were investigated. The extent of Cu2+ removal increased from 93.53% to 99.81% as initial pH rose from 2.5 to 7.0. The residual Cu2+ concentration was as low as <0.2 mg/L. The highest extent of Cu2+ removal was achieved at Fe/C mass ratio of 6.8:1. The pseudo-second-order kinetic model fitted well for Cu2+ removal by the ceramsite, revealing the chemisorption as a limiting step. The Cu2+ adsorption equilibrium data were well described by the Langmuir isotherm, with a maximum adsorption capacity of 546.45 mg/g at initial pH 3.0.

Adsorption behavior of isocyanate/ethylenediamine tetraacetic acid-functionalized graphene oxides for Cu2+ removal

2018 ◽  
Vol 78 (12) ◽  
pp. 2459-2468 ◽  
Author(s):  
Yan Yang ◽  
Yun Yu ◽  
Ning-ning Yang ◽  
Bin Huang ◽  
Ya-fei Kuang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Tetraacetic Acid ◽  
Functionalized Graphene ◽  
Graphene Oxides ◽  
Functionalized Graphene Oxide ◽  
X Ray ◽  
Heavy Metal Cations ◽  
Ethylenediamine Tetraacetic Acid

Abstract A special adsorption of Cu2+ removal is demonstrated using specifically functionalized graphene oxide (GO)/isocyanate (MDI) composites, on which ethylenediamine tetraacetic acid (EDTA) is grafted via amidation and carbamate reaction. The structure and morphology of GO and functionalized composites (EDTA/MDI/GO) were characterized by scanning electron microscope (SEM), Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Thermogravimetric analysis (TGA). This study investigated the adsorption and desorption behaviors of heavy metal cations and the effects of solution conditions such as pH on Cu2+ removal. The experimental results illustrated that after introducing EDTA and MDI into the GO, the maximum adsorption capacity reached 254.2 ± 10.4 mg/g within 180 min, obviously higher than the GO prepared without these additions (136.5 ± 7.2 mg/g). The EDTA/MDI/GO adsorption kinetics and equilibrium adsorption isotherm fitted the pseudo-second-order kinetic model (R2 = 0.995) and Langmuir isotherm model (R2 = 0.986) well, respectively. Furthermore, EDTA/MDI/GO also displayed good reusability for the efficient removal of Cu2+ after being washed with HCl, suggesting potential application in Cu2+ cleanup.

Sign in / Sign up

Export Citation Format

Share Document