scholarly journals Life-Cycle Assessment of Dairy Products—Case Study of Regional Cheese Produced in Portugal

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1182
Author(s):  
Óscar Soares Nunes ◽  
Pedro Dinis Gaspar ◽  
José Nunes ◽  
Paula Quinteiro ◽  
Ana Cláudia Dias ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Animal Feed ◽  
Enteric Fermentation ◽  
Land Preparation ◽  
Sheep Milk ◽  
Production Processes ◽  
Regional Product ◽  
The Impact

Nowadays, there is a growing promotion to label products ecologically in European markets. Knowing that daily products have relevant environmental impact associated with their production, it is of utmost importance to analyse all the related production processes for a better understanding of each process impact. The present study analysed the potential environmental impacts of a Portuguese regional product, the Beira Baixa cheese, coming from the largest national sheep milk region. So, a life cycle assessment (LCA) methodology is used from -cradle-to -gate, including the supplying of the animal feedstock. Impact calculations are performed using the ReCiPe midpoint 2008 method, allowing an analysis of the environmental impacts contributing to climate change, terrestrial acidification, freshwater and marine eutrophication of all productive processes. The results have shown that the greatest impacts occur within the milk production process for all four selected impact categories. This happens mainly due to the fodder cultivation process, also necessary to produce animal feed, which contain processes of fertilization and land preparation. The enteric fermentation and manure management processes have also shown relevant contributions. The impact assessment also showed that the cheesemaking industry has practically insignificant impacts. Nonetheless, the cheesemaking industry can promote their business with these results, by advertising and marketing their product as environmentally friendly, with production processes causing reduced impacts, and therefore also their products.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals Environmental Impact for 3D Bone Tissue Engineering Scaffolds Life Cycle: An Assessment

2021 ◽  
Vol 12 (5) ◽  
pp. 6504-6515
Keyword(s):  
Tissue Engineering ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Environmental Impacts ◽  
Tissue Engineering Scaffolds ◽  
Industrial Soil ◽  
The Impact

With the development of additive manufacturing technology, 3D bone tissue engineering scaffolds have evolved. Bone tissue engineering is one of the techniques for repairing bone abnormalities caused by a variety of circumstances, such as injuries or the need to support damaged sections. Many bits of research have gone towards developing 3D bone tissue engineering scaffolds all across the world. The assessment of the environmental impact, on the other hand, has received less attention. As a result, the focus of this study is on developing a life cycle assessment (LCA) model for 3D bone tissue engineering scaffolds and evaluating potential environmental impacts. One of the methodologies to evaluating a complete environmental impact assessment is life cycle assessment (LCA). The cradle-to-grave method will be used in this study, and GaBi software was used to create the analysis for this study. Previous research on 3D bone tissue engineering fabrication employing poly(ethylene glycol) diacrylate (PEGDA) soaked in dimethyl sulfoxide (DMSO), and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) as a photoinitiator will be reviewed. Meanwhile, digital light processing (DLP) 3D printing is employed as the production technique. The GaBi program and the LCA model developed to highlight the potential environmental impact. This study shows how the input and output of LCA of 3D bone tissue engineering scaffolds might contribute to environmental issues such as air, freshwater, saltwater, and industrial soil emissions. The emission contributing to potential environmental impacts comes from life cycle input, electricity and transportation consumption, manufacturing process, and material resources. The results from this research can be used as an indicator for the researcher to take the impact of the development of 3D bone tissue engineering on the environment seriously.

scholarly journals The Impact Assessment of Campus Buildings Based on a Life Cycle Assessment–Life Cycle Cost Integrated Model

2019 ◽  
Vol 12 (1) ◽  
pp. 294 ◽  
Author(s):  
Zhuyuan Xue ◽  
Hongbo Liu ◽  
Qinxiao Zhang ◽  
Jingxin Wang ◽  
Jilin Fan ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Life Cycle Cost ◽  
Electric Energy ◽  
Integrated Model ◽  
Economic Costs ◽  
Analytic Hierarchy ◽  
The Sustainable Development ◽  
The Impact

The development of higher education has led to an increasing demand for campus buildings. To promote the sustainable development of campus buildings, this paper combines social willingness-to-pay (WTP) with the analytic hierarchy process (AHP) based on the characteristics of Chinese campus buildings to establish a life cycle assessment–life cycle cost (LCA–LCC) integrated model. Based on this model, this paper analyses the teaching building at a university in North China. The results show that the environmental impacts and economic costs are largest in the operation phase of the life cycle, mainly because of the use of electric energy. The environmental impacts and economic costs during the construction phase mainly come from the building material production process (BMPP); in this process, steel is the main source. Throughout the life cycle, abiotic depletion-fossil fuel potential (ADP fossil) and global warming potential (GWP) are the most prominent indexes. Further analysis shows that these two indexes should be the emphases of similar building assessments in the near future. Finally, this study offers suggestions for the proposed buildings and existing buildings based on the prominent problems found in the case study, with the aim to provide reference for the design, construction, and operation management of similar buildings.

scholarly journals Life Cycle Assessment of Maize-Germ Oil Production and The Use of Bioenergy to Mitigate Environmental Impacts: A Gate-To-Gate Case Study

Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 60 ◽  
Author(s):  
Mattias Gaglio ◽  
Elena Tamburini ◽  
Francesco Lucchesi ◽  
Vassilis Aschonitis ◽  
Anna Atti ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Food Industry ◽  
Renewable Energy Sources ◽  
Environmental Benefits ◽  
Impact Categories ◽  
Industrial Processing ◽  
The Impact

The need to reduce the environmental impacts of the food industry is increasing together with the dramatic increment of global food demand. Circulation strategies such as the exploitation of self-produced renewable energy sources can improve ecological performances of industrial processes. However, evidence is needed to demonstrate and characterize such environmental benefits. This study assessed the environmental performances of industrial processing of maize edible oil, whose energy provision is guaranteed by residues biomasses. A gate-to-gate Life Cycle Assessment (LCA) approach was applied for a large-size factory of Northern Italy to describe: (i) the environmental impacts related to industrial processing and (ii) the contribution of residue-based bioenergy to their mitigation, through the comparison with a reference system based on conventional energy. The results showed that oil refinement is the most impacting phase for almost all the considered impact categories. The use of residue-based bioenergy was found to drastically reduce the emissions for all the impact categories. Moreover, Cumulative Energy Demand analysis revealed that the use of biomass residues increased energy efficiency through a reduction of the total energy demand of the industrial process. The study demonstrates that the exploitation of residue-based bioenergy can be a sustainable solution to improve environmental performances of the food industry, while supporting circular economy.

scholarly journals Distinct microalgae species for food—part 1: a methodological (top-down) approach for the life cycle assessment of microalgae cultivation in tubular photobioreactors

2020 ◽  
Vol 32 (5) ◽  
pp. 2977-2995 ◽  
Author(s):  
S. Schade ◽  
T. Meier
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Baseline Scenario ◽  
Season Length ◽  
Microalgae Cultivation ◽  
Top Down ◽  
Tubular Photobioreactor ◽  
The Impact ◽  
Tubular Photobioreactors

Abstract Specific microalgae species are an adequate source of EPA and DHA and are able to provide a complete protein, which makes them highly interesting for human nutrition. However, microalgae cultivation has also been described to be energy intensive and environmentally unfavorable in pilot-scale reactors. Moreover, production in cold temperature zones has not been sufficiently investigated. In particular, the effects of tube materials and cultivation season length have rarely been previously investigated in the context of a comparative LCA of microalgae cultivation. A computational “top-down” model was conducted to calculate input flows for Nannochloropsis sp. and Phaeodactylum tricornutum cultivation in a hypothetical tubular photobioreactor. Cultivation processes were calculated according to detailed satellite climatic data for the chosen location in Central Germany. This model was applied to a set of different scenarios, including variations in photobioreactor material, tube diameter, microalgae species, and cultivation season length. Based on these data, a life cycle assessment (LCA) was performed following ISO standard 14040/44. The impact assessment comprised the global warming potential, acidification, eutrophication, cumulative energy demand, and water scarcity. The results showed that a long cultivation season in spring and fall was always preferable in terms of environmental impacts, although productivity decreased significantly due to the climatic preconditions. Acrylic glass as a tube material had higher environmental impacts than all other scenarios. The cultivation of an alternative microalgae species showed only marginal differences in the environmental impacts compared with the baseline scenario. Critical processes in all scenarios included the usage of hydrogen peroxide for the cleaning of the tubes, nitrogen fertilizer, and electricity for mixing, centrifugation, and drying. Microalgae cultivation in a tubular photobioreactor in a “cold-weather” climate for food is sustainable and could possibly be a complement to nutrients from other food groups. The added value of this study lies in the detailed description of a complex and flexible microalgae cultivation model. The new model introduced in this study can be applied to numerous other scenarios to evaluate photoautotrophic microalgae cultivation in tubular photobioreactors. Thus, it is possible to vary the facility location, seasons, scale, tube dimensions and material, microalgae species, nutrient inputs, and flow velocity. Moreover, single processes can easily be complemented or exchanged to further adjust the model individually, if, for instance, another downstream pathway is required.

scholarly journals Life Cycle Assessment and Environmental Valuation of Biochar Production: Two Case Studies in Belgium

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2166 ◽  
Author(s):  
Sara Rajabi Hamedani ◽  
Tom Kuppens ◽  
Robert Malina ◽  
Enrico Bocci ◽  
Andrea Colantoni ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Production Systems ◽  
Point Of View ◽  
Environmental Benefits ◽  
Pig Manure ◽  
Future Research ◽  
Life Cycle Perspective ◽  
The Impact

It is unclear whether the production of biochar is economically feasible. As a consequence, firms do not often invest in biochar production plants. However, biochar production and application might be desirable from a societal perspective as it might entail net environmental benefits. Hence, the aim of this work has been to assess and monetize the environmental impacts of biochar production systems so that the environmental aspects can be integrated with the economic and social ones later on to quantify the total return for society. Therefore, a life cycle analysis (LCA) has been performed for two potential biochar production systems in Belgium based on two different feedstocks: (i) willow and (ii) pig manure. First, the environmental impacts of the two biochar production systems are assessed from a life cycle perspective, assuming one ton of biochar as the functional unit. Therefore, LCA using SimaPro software has been performed both on the midpoint and endpoint level. Biochar production from willow achieves better results compared to biochar from pig manure for all environmental impact categories considered. In a second step, monetary valuation has been applied to the LCA results in order to weigh environmental benefits against environmental costs using the Ecotax, Ecovalue, and Stepwise approach. Consequently, sensitivity analysis investigates the impact of variation in NPK savings and byproducts of the biochar production process on monetized life cycle assessment results. As a result, it is suggested that biochar production from willow is preferred to biochar production from pig manure from an environmental point of view. In future research, those monetized environmental impacts will be integrated within existing techno-economic models that calculate the financial viability from an investor’s point of view, so that the total return for society can be quantified and the preferred biochar production system from a societal point of view can be identified.

scholarly journals Life Cycle Assessment on Different Synthetic Routes of ZIF-8 Nanomaterials

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4998
Author(s):  
Vasileios Ntouros ◽  
Ioannis Kousis ◽  
Dimitra Papadaki ◽  
Anna Laura Pisello ◽  
Margarita Niki Assimakopoulos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Research Activity ◽  
Synthetic Routes ◽  
The Impact

In the last twenty years, research activity around the environmental applications of metal–organic frameworks has bloomed due to their CO2 capture ability, tunable properties, porosity, and well-defined crystalline structure. Thus, hundreds of MOFs have been developed. However, the impact of their production on the environment has not been investigated as thoroughly as their potential applications. In this work, the environmental performance of various synthetic routes of MOF nanoparticles, in particular ZIF-8, is assessed through a life cycle assessment. For this purpose, five representative synthesis routes were considered, and synthesis data were obtained based on available literature. The synthesis included different solvents (de-ionized water, methanol, dimethylformamide) as well as different synthetic steps (i.e., hours of drying, stirring, precursor). The findings revealed that the main environmental weak points identified during production were: (a) the use of dimethylformamide (DMF) and methanol (MeOH) as substances impacting environmental sustainability, which accounted for more than 85% of the overall environmental impacts in those synthetic routes where they were utilized as solvents and as cleaning agents at the same time; (b) the electricity consumption, especially due to the Greek energy mix which is fossil-fuel dependent, and accounted for up to 13% of the overall environmental impacts in some synthetic routes. Nonetheless, for the optimization of the impacts provided by the energy use, suggestions are made based on the use of alternative, cleaner renewable energy sources, which (for the case of wind energy) will decrease the impacts by up to 2%.

scholarly journals Life Cycle Assessment of Nitrate and Compound Fertilizers Production—A Case Study

2020 ◽  
Vol 13 (1) ◽  
pp. 148
Author(s):  
Georgios Gaidajis ◽  
Ilias Kakanis
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Ghg Emissions ◽  
Total Production ◽  
Production Processes ◽  
Water Eutrophication ◽  
Production Industry ◽  
Freshwater Eutrophication

The production and utilization of fertilizers are processes with known and noteworthy environmental impacts. Direct greenhouse gas (GHG) emissions and a high contribution to water eutrophication due to the nitrogen (N) and phosphorus (P) derivatives are some of the most crucial impacts derived from the overall life cycle of fertilizer use. The life cycle assessment (LCA) has been reliable and analytical tool for the identification, quantification, and evaluation of potential environmental impacts of fertilizers related to the products, production processes, or activities throughout their lifecycle. In this paper, a gate-to-gate LCA approach was applied in order to identify and evaluate the impacts derived from the production processes of nitrate and compound fertilizers the production industry in Northeastern Greece. The results from this study prove that compound fertilizers have a greater impact compared with nitrate fertilizers, contributing up to 70% of the total production impacts. Furthermore, climate change, freshwater eutrophication, and fossil fuel depletion were identified as the most crucial impact categories. Finally, a comparison with relevant LCA studies was conducted, in order to identify the possibility of a consistency pattern of the fertilizer production impacts in general.

scholarly journals Environmental impacts of paper handouts vs. Online handouts-from a life cycle assessment prospective

2017 ◽  
Vol 15 (2) ◽  
Author(s):  
Juan Arango
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Hard Copy ◽  
Paper Production ◽  
Product Use ◽  
Production Processes

<p class="p1"><span class="s1">T</span>he purpose of this study was to address the concerns about sustainability between the uses of hard copy reference documents versus online copies. This project presents a Life Cycle Assessment (LCA) study comparing the production and use of a hard copy handout versus an online handout. For the purpose of this study, paper handouts and online handouts are two different and independent processes. This means that they not only have different outputs but also have different manufacturing stages in order to get to the final result. The scope of this study is “cradle to grave,” starting with the extraction of the raw materials, followed by paper and computer production processes, transportation, product use and disposal/recovery. Results indicate that under the made assumptions, the use of a paper handout has more environmental impacts. At the same time among the evaluated processes, paper production has higher environmental impacts.</p>

scholarly journals A Comparative Life Cycle Assessment of Different Production Processes for Waterborne Polyurethane Dispersions

2021 ◽  
Author(s):  
Valentin Klug ◽  
Josef-Peter Schöggl ◽  
Doris Dallinger ◽  
Clemens Stueckler ◽  
Andreas Steiner ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Impact Category ◽  
Waterborne Polyurethane ◽  
Flow Process ◽  
Production Processes ◽  
Cradle To Gate ◽  
Polyurethane Dispersions ◽  
The Impact ◽  
Comparative Life Cycle Assessment

This study provides a comparative life cycle assessment (LCA) of four different polyurethane dispersion production processes from cradle-to-gate. The environmental performances of the NMP process, the acetone process, the melt process, and a conceptualized continuous flow process were evaluated and compared following the CML 2001 methodology. The LCA revealed that the conceptualized flow process exhibits the lowest environmental impact in all investigated impact categories. Depending on the impact category, the melt process or the acetone process rank second. The NMP process was observed to have the highest impact in all categories. Consequently, the flow process has the lowest carbon footprint (1.13 kg CO2-eq), according to the global warming potential (100 years), followed by the melt (1.45 kg CO2-eq), the acetone (1.95 kg CO2-eq) and the NMP process (3.11 kg CO2-eq).

Sign in / Sign up

Export Citation Format

Share Document