scholarly journals Pd/Au Based Catalyst Immobilization in Polymeric Nanofibrous Membranes via Electrospinning for the Selective Oxidation of 5-Hydroxymethylfurfural

Processes ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 45 ◽  
Author(s):  
Danilo Bonincontro ◽  
Francesco Fraschetti ◽  
Claire Squarzoni ◽  
Laura Mazzocchetti ◽  
Emanuele Maccaferri ◽  
...  
Keyword(s):  
Selective Oxidation ◽  
Large Scale ◽  
Catalytic Performance ◽  
High Yield ◽  
Key Factors ◽  
Hydroxymethyl Furfural ◽  
Catalyst Immobilization ◽  
Polymeric Component ◽  
Furandicarboxylic Acid ◽  
Nanofibrous Membranes

Innovative nanofibrous membranes based on Pd/Au catalysts immobilized via electrospinning onto different polymers were engineered and tested in the selective oxidation of 5-(hydroxymethyl)furfural in an aqueous phase. The type of polymer and the method used to insert the active phases in the membrane were demonstrated to have a significant effect on catalytic performance. The hydrophilicity and the glass transition temperature of the polymeric component are key factors for producing active and selective materials. Nylon-based membranes loaded with unsupported metal nanoparticles were demonstrated to be more efficient than polyacrylonitrile-based membranes, displaying good stability and leading to high yield in 2,5-furandicarboxylic acid. These results underline the promising potential of large-scale applications of electrospinning for the preparation of catalytic nanofibrous membranes to be used in processes for the conversion of renewable molecules.

Aerobic selective oxidation of 5-hydroxymethyl-furfural over nitrogen-doped graphene materials with 2,2,6,6-tetramethylpiperidin-oxyl as co-catalyst

2016 ◽  
Vol 6 (7) ◽  
pp. 2377-2386 ◽  
Author(s):  
Guangqiang Lv ◽  
Hongliang Wang ◽  
Yongxing Yang ◽  
Xiao Li ◽  
Tiansheng Deng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Thermal Treatment ◽  
Selective Oxidation ◽  
Aerobic Oxidation ◽  
Catalytic Performance ◽  
Co Catalyst ◽  
Nitrogen Doped ◽  
Hydroxymethyl Furfural ◽  
Nitrogen Doped Graphene ◽  
Doped Graphene

N-doped graphene materials were prepared via thermal treatment of graphene oxide in flowing NH3, and their catalytic performance was tested in aerobic oxidation of 5-hydroxymethy-furfural.

Tunable mixed oxides based on CeO2 for the selective aerobic oxidation of 5-(hydroxymethyl)furfural to FDCA in water

2018 ◽  
Vol 20 (17) ◽  
pp. 3921-3926 ◽  
Author(s):  
Maria Ventura ◽  
Francesco Nocito ◽  
Elvira de Giglio ◽  
Stefania Cometa ◽  
Angela Altomare ◽  
...  
Keyword(s):  
Selective Oxidation ◽  
Mixed Oxides ◽  
Aerobic Oxidation ◽  
Hydroxymethyl Furfural ◽  
Furandicarboxylic Acid ◽  
Selective Aerobic Oxidation

The selective oxidation of 5-HMF towards 2,5-furandicarboxylic acid (FDCA) has been achieved with 99% yield in water, using oxygen as the oxidant over CuO·MnO2·CeO2 mixed oxides.

scholarly journals Recent Developments in Metal-Based Catalysts for the Catalytic Aerobic Oxidation of 5-Hydroxymethyl-Furfural to 2,5-Furandicarboxylic Acid

Catalysts ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 120 ◽  
Author(s):  
Sohaib Hameed ◽  
Lu Lin ◽  
Aiqin Wang ◽  
Wenhao Luo
Keyword(s):  
Large Scale ◽  
Aerobic Oxidation ◽  
Catalytic Performance ◽  
Efficient Production ◽  
Research Attention ◽  
Free System ◽  
Environmental Aspect ◽  
Recent Developments ◽  
Furandicarboxylic Acid ◽  
Alternative Feedstock

Biomass can be used as an alternative feedstock for the production of fuels and valuable chemicals, which can alleviate the current global dependence on fossil resources. One of the biomass-derived molecules, 2,5-furandicarboxylic acid (FDCA), has attracted great interest due to its broad applications in various fields. In particular, it is considered a potential substitute of petrochemical-derived terephthalic acid (PTA), and can be used for the preparation of valuable bio-based polyesters such as polyethylene furanoate (PEF). Therefore, significant attempts have been made for efficient production of FDCA and the catalytic chemical approach for FDCA production, typically from a biomass-derived platform molecule, 5-hydroxymethylfurfural (HMF), over metal catalysts is the focus of great research attention. In this review, we provide a systematic critical overview of recent progress in the use of different metal-based catalysts for the catalytic aerobic oxidation of HMF to FDCA. Catalytic performance and reaction mechanisms are described and discussed to understand the details of this reaction. Special emphasis is also placed on the base-free system, which is a more green process considering the environmental aspect. Finally, conclusions are given and perspectives related to further development of the catalysts are also provided, for the potential production of FDCA on a large scale in an economical and environmentally friendly manner.

A Simple Synthesis of the Anticancer Drug Altretamine

2020 ◽  
Vol 17 (8) ◽  
pp. 628-630
Author(s):  
Vu Binh Duong ◽  
Pham Van Hien ◽  
Tran Thai Ngoc ◽  
Phan Dinh Chau ◽  
Tran Khac Vu
Keyword(s):  
Aqueous Solution ◽  
Anticancer Drug ◽  
Potassium Hydroxide ◽  
Large Scale ◽  
Synthesis Method ◽  
Practical Method ◽  
Cyanuric Chloride ◽  
Simple Synthesis ◽  
High Yield ◽  
One Step

A simple and practical method for the synthesis on a large scale of altretamine (1), a wellknown antitumor drug, has been successfully developed. The synthesis method involves the conversion of cyanuric chloride (2) into altretamine (1) by dimethylamination of 2 with an aqueous solution of 40% dimethylamine and potassium hydroxide in 1, -dioxan 4in one step to give altretamine (1) in high yield.

scholarly journals Metal-Organic Frameworks in Oxidation Catalysis with Hydrogen Peroxide

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 283
Author(s):  
Oxana Kholdeeva ◽  
Nataliya Maksimchuk
Keyword(s):  
Hydrogen Peroxide ◽  
Liquid Phase ◽  
Selective Oxidation ◽  
Metal Organic Frameworks ◽  
Short Review ◽  
Catalytic Performance ◽  
Oxidation Catalysis ◽  
Catalyst Stability ◽  
Aqueous Hydrogen Peroxide ◽  
Metal Organic

In recent years, metal–organic frameworks (MOFs) have received increasing attention as selective oxidation catalysts and supports for their construction. In this short review paper, we survey recent findings concerning use of MOFs in heterogeneous liquid-phase selective oxidation catalysis with the green oxidant–aqueous hydrogen peroxide. MOFs having outstanding thermal and chemical stability, such as Cr(III)-based MIL-101, Ti(IV)-based MIL-125, Zr(IV)-based UiO-66(67), Zn(II)-based ZIF-8, and some others, will be in the main focus of this work. The effects of the metal nature and MOF structure on catalytic activity and oxidation selectivity are analyzed and the mechanisms of hydrogen peroxide activation are discussed. In some cases, we also make an attempt to analyze relationships between liquid-phase adsorption properties of MOFs and peculiarities of their catalytic performance. Attempts of using MOFs as supports for construction of single-site catalysts through their modification with heterometals will be also addressed in relation to the use of such catalysts for activation of H2O2. Special attention is given to the critical issues of catalyst stability and reusability. The scope and limitations of MOF catalysts in H2O2-based selective oxidation are discussed.

scholarly journals Additive-Enhanced Exfoliation for High-Yield 2D Materials Production

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 601
Author(s):  
Dinh-Tuan Nguyen ◽  
Hsiang-An Ting ◽  
Yen-Hsun Su ◽  
Mario Hofmann ◽  
Ya-Ping Hsieh
Keyword(s):  
Large Scale ◽  
2D Materials ◽  
Transition Metal Dichalcogenides ◽  
Spectroscopic Characterization ◽  
High Yield ◽  
Nanometer Scale ◽  
Efficient Production ◽  
Device Performance ◽  
Metal Dichalcogenides ◽  
Scale Deposition

The success of van-der-Waals electronics, which combine large-scale-deposition capabilities with high device performance, relies on the efficient production of suitable 2D materials. Shear exfoliation of 2D materials’ flakes from bulk sources can generate 2D materials with low amounts of defects, but the production yield has been limited below industry requirements. Here, we introduce additive-assisted exfoliation (AAE) as an approach to significantly increase the efficiency of shear exfoliation and produce an exfoliation yield of 30%. By introducing micrometer-sized particles that do not exfoliate, the gap between rotor and stator was dynamically reduced to increase the achievable shear rate. This enhancement was applied to WS2 and MoS2 production, which represent two of the most promising 2D transition-metal dichalcogenides. Spectroscopic characterization and cascade centrifugation reveal a consistent and significant increase in 2D material concentrations across all thickness ranges. Thus, the produced WS2 films exhibit high thickness uniformity in the nanometer-scale and can open up new routes for 2D materials production towards future applications.

scholarly journals Performance of Strawberry Varieties Developed for Perennial Matted-Row Production in Annual Plasticulture in a Cold Climate Region

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1407
Author(s):  
Courtney A. Weber
Keyword(s):  
Large Scale ◽  
Fruit Size ◽  
Weather Conditions ◽  
Cold Climate ◽  
Annual Production ◽  
High Yield ◽  
Production Cycle ◽  
Late Season ◽  
Berry Weight ◽  
High Yields

Annual plasticulture production of strawberries promises superior weed control, fruit quality and yields. However, strawberry varieties adapted for perennial, matted-row production and local markets in cold climate regions have not been widely tested for adaptation to an annual production cycle. Productivity of seven short-day varieties developed for matted-row and/or annual production was examined in an annual plasticulture system in two consecutive trials in central NY (lat. 42.87° N, long. 76.99° W) harvested in 2013 and 2014. ‘Flavorfest’ demonstrated good performance in Trial 1 with high yield (390 g/plant) and large fruit size (13.9 g mean berry weight). ‘Jewel’ was shown to be well adapted to the annual plasticulture system with consistently high yields (330 and 390 g/plant) that equaled or surpassed other varieties and had moderate fruit size. ‘Chandler’ performed similarly to previous trials conducted in warmer regions with yield (340 g/plant) and fruit size (9.8 g mean berry weight) similar to ‘Jewel’. ‘Clancy’ yielded less but was consistent from year to year. The late season varieties Seneca and Ovation showed marked variability between years, possibly due to drastically different temperatures during flowering and fruit development in Trial 1 compared to Trial 2. High temperatures in Trial 1 likely caused higher early fruit yield, a compressed season and a precipitous decline in fruit size in the later season, thus reducing yield in the late season. Survival after a second dormant period was poor resulting in a small second harvest and reduced fruit size. Overall, the system demonstrated many of the expected benefits but may be more sensitive to weather conditions in the region. While many varieties developed for matted-row production may work well in an annual plasticulture system, not all varieties are equally adapted. Performance of each variety should be determined independently before large scale adoption by growers.

scholarly journals Transcriptomic resources for prairie grass (Bromus catharticus): expressed transcripts, tissue-specific genes, and identification and validation of EST-SSR markers

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Ming Sun ◽  
Zhixiao Dong ◽  
Jian Yang ◽  
Wendan Wu ◽  
Chenglin Zhang ◽  
...  
Keyword(s):  
Genetic Diversity ◽  
Ssr Markers ◽  
Large Scale ◽  
Genetic Research ◽  
High Yield ◽  
Yield Strain ◽  
Tissue Samples ◽  
Prairie Grass ◽  
The Future ◽  
Genomic Resource

Abstract Background Prairie grass (Bromus catharticus) is a typical cool-season forage crop with high biomass production and fast growth rate during winter and spring. However, its genetic research and breeding has remained stagnant due to limited available genomic resources. The aim of this study was to generate large-scale genomic data using high-throughput transcriptome sequencing, and perform a preliminary validation of EST-SSR markers of B. catharticus. Results Eleven tissue samples including seeds, leaves, and stems were collected from a new high-yield strain of prairie grass BCS1103. A total of 257,773 unigenes were obtained, of which 193,082 (74.90%) were annotated. Comparison analysis between tissues identified 1803, 3030, and 1570 genes specifically and highly expressed in seed, leaf, and stem, respectively. A total of 37,288 EST-SSRs were identified from unigene sequences, and more than 80,000 primer pairs were designed. We synthesized 420 primer pairs and selected 52 ones with high polymorphisms to estimate genetic diversity and population structure in 24 B. catharticus accessions worldwide. Despite low diversity indicated by an average genetic distance of 0.364, the accessions from South America and Asia and wild accessions showed higher genetic diversity. Moreover, South American accessions showed a pure ancestry, while Asian accessions demonstrated mixed internal relationships, which indicated a different probability of gene flow. Phylogenetic analysis clustered the studied accessions into four clades, being consistent with phenotypic clustering results. Finally, Mantel analysis suggested the total phenotypic variation was mostly contributed by genetic component. Stem diameter, plant height, leaf width, and biomass yield were significantly correlated with genetic data (r > 0.6, P < 0.001), and might be used in the future selection and breeding. Conclusion A genomic resource was generated that could benefit genetic and taxonomic studies, as well as molecular breeding for B. catharticus and its relatives in the future.

Sign in / Sign up

Export Citation Format

Share Document