scholarly journals Removal of Lead and Cadmium Ions from Aqueous Solution by Adsorption on a Low-Cost Phragmites Biomass

Processes ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 406 ◽  
Author(s):  
Abdulaziz N. Amro ◽  
Mohammad K. Abhary ◽  
Muhammad Mansoor Shaikh ◽  
Samah Ali
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Study Data ◽  
Small Surface ◽  
Cadmium Ions ◽  
Lead And Cadmium

In recent years, the interest in waste water treatment increased to preserve the environment. The objective of this study is the removal of lead and cadmium ions from aqueous solution by treated Phragmites biomass (TPB). TPB was characterized by using Fourier transform infrared spectroscopy (FTIR) and energy dispersive X-ray analysis (EDS) which indicates the presence of functional groups that may be responsible of metal adsorption such as hydroxyl, carbonyl, sulfonate and carboxylate. Characterization by scanning electron microscopy (SEM) and surface area analysis using the Brunauer–Emmett–Teller method (BET) illustrated that TPB is nonporous with a small surface area. The influences of various experimental factors were investigated; the proposed method recommended the extraction of Pb+2 and Cd+2 metal ions by TPB at pH 5.0. A contact time of 60 and 45 min was required for the adsorption 50 mL (50 ppm) Pb+2 and Cd+2 respectively to reach equilibrium when 0.10 g TPB was used. The optimum TPB dosage was 0.20 g for adsorption both metal ions when adsorbate solution was 50 mL (50 ppm). Particle sizes of 0.125–0.212 mm showed the best metal ion removal of both metal ions. Thermodynamic study illustrated that both metal ions correlate more with Langmuir isotherm. Furthermore, chemisorption of Pb+2 and Cd+2 on TPB was more likely according to kinetic study data.

Removal of Pb(II) and Cd(II) From Aqueous Solution by Adsorption Using Agrowaste-Modified Kaolinite Clay

2021 ◽  
Keyword(s):  
Aqueous Solution ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Kaolinite Clay ◽  
Adsorbent Surface ◽  
Initial Adsorption ◽  
Adsorption Rates

This study showed that kaolinite clay modified with Moringa oleifera pods is a promising low cost adsorbent for the removal of metals from aqueous solution because the resultant composite has higher adsorption capacities, and hence a better metal ions removal efficiency. The efficiencies of these adsorbents for the removal of Pb (II) and Cd (II) ions from aqueous solutions were studied as a function of pH, time, adsorbate concentration and adsorbent dose. Adsorption results showed that pH did significantly affect removal of heavy metal ions between pH 3 and 6. Increasing contact time and initial metal ion concentration increased the sorption capacity of the adsorbent for the metal ions. Adsorbent dosage indicated mainly surface phenomena involving sharing of electrons between the adsorbent surface and the metal ion species. The adsorption of metal ions from aqueous solutions of both metal ions at different initial metal ion concentrations reduced the initial adsorption rates of the adsorption of Pb (II) and Cd (II) by unmodified and modified kaolinite clay.

scholarly journals Equilibrium and Kinetic Studies for The Adsorptive Removal of Lead (II) Ions from Aqueous Solution Using Activated Plantain Peel Biochar

2020 ◽  
Vol 4 (1) ◽  
pp. 9-16
Author(s):  
FS Nworie ◽  
EC Oroke ◽  
II Ikelle ◽  
JS Nworu
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Intraparticle Diffusion Model ◽  
Activated Biochar ◽  
Bet Analysis

AbstractStudies on the adsorption of Pb(II) on plantain peels biochar (PPB) was conducted. The carbonized and activated, biochar was characterized using Braunauer-Emmett-Teller (BET) surface area and x-ray diffraction crystallography (XRD). BET analysis of the PPB indicated that the pore size (cc/g) and pore surface area (m2/g) was 8.79 and 16.69 respectively. Result of the XRD evaluated through Debye-Scherrer equation, showed a nanostructure with crystallite size of 14.56 nm. Effects of initial metal ion concentration, pH, and contact time were studied in a batch reaction process. Results showed that the adsorption of lead from aqueous solution increased with an increase in pH and initial concentration. Equilibrium modeling studies suggested that the data fitted mainly to the Langmuir isotherm. Adsorption kinetic data tested using various kinetic models fitted the Weber and Morris intraparticle diffusion model implicating pore diffusion as the main rate limiting step. The sorption studies indicated the potential of plantain peel biochar as an effective, efficient and low cost adsorbent for remediating lead (II) ions contaminated environment.

scholarly journals Insights into the Recent Use of Modified Adsorbents in Removing Heavy Metal Ions from Aqueous Solution

2021 ◽  
Vol 12 (2) ◽  
pp. 1884-1898
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Low Cost ◽  
Ion Concentration ◽  
Future Research ◽  
Batch Tests

Natural water gets contaminated with heavy metal ions because of industrial effluents' discharge into the aquatic environment. As these heavy metal ions cause various health hazards, they should be removed from the aqueous solution. Heavy metal ion concentration in the aqueous solution is very less, so conventional metal removal and recovery processes cannot be applied here. The adsorption method is a great alternative to all these processes as it is a cost-effective and easy method. The use of natural, low-cost materials as adsorbents is eco-friendly also. However, metal uptake capacity of low-cost materials is very less. So, modification is required for low-cost materials to increase their efficiency. In the present review, different modification procedures adopted by different researchers have been discussed. Different low-cost materials used are sawdust, fruit and vegetable wastes, soil, minerals, etc. The modifying agents are heat, acids, bases, and other chemicals. Nevertheless, most of the studies are limited to batch tests only. Future research should be carried out on the extension of batch tests to column study for the large-scale treatment of contaminated water, and the cost of modification procedures and their impact on the environment should also be assessed.

Biosorptive removal of lead and cadmium ions from aqueous solution: The use of carrot residues as low cost non-conventional adsorbent

2012 ◽  
Vol 37 (2) ◽  
pp. 272-279 ◽  
Author(s):  
Sadia Ata ◽  
Feroza Hamid Wattoo ◽  
Lala Rukh Sidra ◽  
Muhammad Hamid Sarwar Wattoo ◽  
Syed Ahmed Tirmizi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Cadmium Ions ◽  
Lead And Cadmium

scholarly journals The biosorption potential of waste biomass young fruit walnuts for lead ions: Kinetic and equilibrium study

2016 ◽  
Vol 70 (3) ◽  
pp. 243-255
Author(s):  
Dragana Markovic ◽  
Danijela Bojic ◽  
Aleksandar Bojic ◽  
Goran Nikolic
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Waste Biomass ◽  
Sorption Data ◽  
Biosorption Capacity ◽  
Young Fruit

The biosorption potential of waste biomass young fruit walnuts (YFW) as a low-cost biosorbent, processed from liqueur industry, for Pb(II) ions from aqueous solution was explored. The structural features of the biosorbent were characterized by FTIR spectroscopy, which indicates the possibility that the different functional groups may be responsible for the binding of Pb(II) ions from aqueous solution. The effects of relevant parameters such as pH (2 - 6), contact time (0 - 120 min), biosorbent dosage (2 - 20 g), initial metal ion concentration (10 - 120 mg dm-3), at a temperature of 25(C with stirring (120 rpm) and a constant ionic strength of 0,02 mol dm-3 were evaluated in batch experiments. The sorption equilibrium of Pb(II) ion (when 84 % of metal ions were sorbed at an initial concentration of 15 mg dm-3) was achieved within the pH range 4 - 5 after 50 min. Kinetic data were best described by the pseudo-second order model. Removal efficiency of Pb(II) ion rapidly increased with increasing biosorbent dose from 2.0 to 8.0 g per dm-3 of sorbate. Optimal biosorbent dose was set to 6.0 g per dm3 of sorbate. An increase in the initial metal concentration increases the biosorption capacity. The sorption data of investigated metal ion are fitted to Langmuir, Freundlich and Temkin isotherm models. The equilibrium data were well fitted by the Langmuir isotherm model (R2 ? 0.990). The maximum monolayer biosorption capacity of waste biomass YFW for Pb(II) ion, at 25.0 ? 0.5?C and pH 4.5, was found to be 19.23 mgg-1. This available waste biomass is efficient in the uptake of Pb(II) ions from aqueous solution and could be used as a low-cost and an alternative biosorbent for the treatment of wastewater streams bearing these metal ions.

scholarly journals Kinetics and isotherm modeling of Pb(II) and Cd(II) sequestration from polluted water onto tropical ultisol obtained from Enugu Nigeria

2021 ◽  
Vol 11 (4) ◽  
Author(s):  
Theresa C. Umeh ◽  
John K. Nduka ◽  
Kovo G. Akpomie
Keyword(s):  
Metal Ions ◽  
Low Cost ◽  
Water Environment ◽  
Standard Technique ◽  
Soil Surface ◽  
Cost Effective ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Lead And Cadmium ◽  
Pseudo Second Order

AbstractDeterioration in soil–water environment severely contributed by heavy metal bioavailability and mobility on soil surface and sub-surface due to irrational increase in wastewater discharge and agrochemical activities. Therefore, the feasibility of adsorption characteristics of the soil is paramount in curbing the problem of micropollutant contamination in the farming vicinity. Soil from a farming site in a populated area in Enugu, Nigeria was collected and tested to measure the lead and cadmium contents using atomic absorption spectrophotometer (AAS). The adsorption potency of the ultisol soil was estimated for identifiable physicochemical properties by standard technique. The mean activity concentration of Pb2+ and Cd2+ was 15.68 mg/kg and 3.01 mg/kg. The pH, temperature, metal concentration and contact time adsorptive effect on the Pb2+ and Cd2+ uptake was evaluated by batch adsorption technique. The Langmuir, Freundlich and Temkin models were fitted into equilibrium adsorption data and the calculated results depict a better and satisfactory correlation for Langmuir with higher linear regression coefficients (Pb2+, 0.935 and Cd2+, 0.971). On the basis of sorption capacity mechanism of the soil, pseudo-second-order model best described the kinetics of both metal ions retention process. The results of the present study indicated that the soil being a low cost-effective adsorbent can be utilized to minimize the environmental risk impact of these metal ions.

Synthesis of Nano Structured Membrane from Carbon Nanotube for Waste Water Treatment

2013 ◽  
Vol 829 ◽  
pp. 386-390 ◽  
Author(s):  
Mehri Imani ◽  
Alimorad Rashidi ◽  
Mojtaba Shariaty-Niassar ◽  
Elahe Sarlak ◽  
Amir Zarghan
Keyword(s):  
Waste Water ◽  
Carbon Nanotube ◽  
Metal Ion ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Chemical Vapor ◽  
Morphological Properties ◽  
Carbon Membranes ◽  
Vertically Aligned ◽  
Simple Technology

Carbon membranes have high adsorption capacitiy with respect to its incredible properties such as unique structural, electronic, optoelectronic, semiconductor, mechanical, chemical and physical. Carbon nanotube (CNT) membranes because of its high permeance have been recently developed.Great attention has been currently paid to the field of fabrication methods capable of producing uniform, well-aligned and monodispersed CNT array. Current research concerns with fabrication of vertically aligned CNT membrane in order to remove heavy metal ion presents in waste water. For this purpose, CNTs are vertically grown up through the holes of anodic aluminium oxide (AAO); as a template, by chemical vapor deposition (CVD) of acetylene gas.In this work a few heavy metals such as Pb (II), Cu (II) and Cd (II) has been examined for checking the perfomance of membrane in aqueous solution. The morphological properties of the aligned CNT membrane were investigated with scanning electron microscopy (SEM). The method has simple technology, low cost, and easy reproduction.

scholarly journals Batch Sorption Experiments: Langmuir and Freundlich Isotherm Studies for the Adsorption of Textile Metal Ions onto Teff Straw (Eragrostis tef) Agricultural Waste

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mulu Berhe Desta
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Low Cost ◽  
Agricultural Waste ◽  
Equilibrium Concentration ◽  
Eragrostis Tef ◽  
Batch Adsorption ◽  
Textile Effluents

Adsorption of heavy metals (Cr, Cd, Pb, Ni, and Cu) onto Activated Teff Straw (ATS) has been studied using batch-adsorption techniques. This study was carried out to examine the adsorption capacity of the low-cost adsorbent ATS for the removal of heavy metals from textile effluents. The influence of contact time, pH, Temperature, and adsorbent dose on the adsorption process was also studied. Results revealed that adsorption rate initially increased rapidly, and the optimal removal efficiency was reached within about 1 hour. Further increase in contact time did not show significant change in equilibrium concentration; that is, the adsorption phase reached equilibrium. The adsorption isotherms could be fitted well by the Langmuir model. The value in the present investigation was less than one, indicating that the adsorption of the metal ion onto ATS is favorable. After treatment with ATS the levels of heavy metals were observed to decrease by 88% (Ni), 82.9% (Cd), 81.5% (Cu), 74.5% (Cr), and 68.9% (Pb). Results indicate that the freely abundant, locally available, low-cost adsorbent, Teff straw can be treated as economically viable for the removal of metal ions from textile effluents.

scholarly journals Optimisation of durian peel based activated carbon preparation conditions for dye removal

2013 ◽  
Vol 16 (1) ◽  
pp. 22-31
Author(s):  
Phung Thi Kim Le ◽  
Kien Anh Le
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Surface Area ◽  
Dye Removal ◽  
Activated Carbons ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Impregnation Ratio ◽  
Carbon Production ◽  
Removal Capacity

Agricultural wastes are considered to be a very important feedstock for activated carbon production as they are renewable sources and low cost materials. This study present the optimize conditions for preparation of durian peel activated carbon (DPAC) for removal of methylene blue (MB) from synthetic effluents. The effects of carbonization temperature (from 673K to 923K) and impregnation ratio (from 0.2 to 1.0) with potassium hydroxide KOH on the yield, surface area and the dye adsorbed capacity of the activated carbons were investigated. The dye removal capacity was evaluated with methylene blue. In comparison with the commercial grade carbons, the activated carbons from durian peel showed considerably higher surface area especially in the suitable temperate and impregnation ratio of activated carbon production. Methylene blue removal capacity appeared to be comparable to commercial products; it shows the potential of durian peel as a biomass source to produce adsorbents for waste water treatment and other application. Optimize condition for preparation of DPAC determined by using response surface methodology was at temperature 760 K and IR 1.0 which resulted the yield (51%), surface area (786 m2/g), and MB removal (172 mg/g).

scholarly journals A Study on the Photocatalytic Reduction of Some Metal Ions in Aqueous Solution Using UV- Titanium Dioxide System

2019 ◽  
pp. 1-7
Author(s):  
I. O. Ekwere ◽  
M. Horsfall ◽  
J. O. E. Otaigbe
Keyword(s):  
Aqueous Solution ◽  
Titanium Dioxide ◽  
Metal Ions ◽  
Metal Ion ◽  
Uv Light ◽  
Kinetic Studies ◽  
Photocatalytic Reduction ◽  
Alkaline Ph ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The photocatalytic reduction of Cu (II), Pb (II), Cd (II) and Cr (VI) ions in aqueous solution has been investigated. The photocatalyst utilized was nano titanium dioxide, composed of 80% anatase and 20% rutile; the UV light source was a 15 W UV bulb with a wavelength of 254 nm. The results obtained indicated a reduction efficiency order as follows; Cr6+ > Cu2+ > Pb2+ > Cd2+. It was observed that these results correlate with the respective reduction potentials of the metal ions. The effect of pH on the photocatalytic reduction of the metal ions was also carried out and results obtained indicated that with the exception of Cr (VI) ions, higher percentage removal of metal ions from their aqueous solution was recorded at alkaline pH than at acidic pH. This was attributed to an extensive formation of precipitate by the metal ions at alkaline pH. Kinetic studies revealed that the removal of metal ions from their solutions largely followed the pseudo- first-order kinetics. Therefore, the results of this study will be useful in metal ion removal from industrial waste water using photocatalytic process.

Sign in / Sign up

Export Citation Format

Share Document