scholarly journals Alginate/Banana Waste Beads Supported Metal Nanoparticles for Efficient Water Remediation

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4054
Author(s):  
Taghreed M. Fagieh ◽  
Esraa M. Bakhsh ◽  
Sher Bahadar Khan ◽  
Kalsoom Akhtar ◽  
Abdullah M. Asiri
Keyword(s):  
Metal Nanoparticles ◽  
Sodium Alginate ◽  
Food Waste ◽  
Low Cost ◽  
Water Remediation ◽  
Population Increase ◽  
Banana Peel ◽  
Water Contaminants ◽  
Catalytic Support ◽  
The Impact

Water pollution is considered a perilous issue that requires an immediate solution. This is largely because of the strong correlation between the global population increase and the amount of waste produced (most notably food waste). This project prompts the conversion of food waste into useful materials that can be used with sodium alginate as a catalytic support for metal nanoparticles. Sodium alginate/banana peel (Alg/BP) beads were prepared simply using an eco-friendly method. The prepared materials were modified using nanostructured materials to enhance their characteristics. Alg/BP beads were employed as adsorbents for metals that were then treated with sodium borohydride to produce MNPs@Alg/BP. Different MNPs@Alg/BP (MNPs = Ag, Ni, Co, Fe, and Cu) were used as catalysts for reducing 4-nitrophenol (4-NP) by NaBH4 to evaluate each catalyst performance in a model reaction. The results exhibited that Cu@Alg/BP was most efficient toward complete transformation of 4-NP. Therefore, Cu@Alg/BP was also used as a catalyst for the reduction of potassium ferricyanide, congo red, methyl orange (MO), and methylene blue. It was found that Cu@Alg/BP beads catalytically reduced up to 95–99% of above pollutants within a few minutes. Cu@Alg/BP beads were more selective in reducing MO among the pollutants. The catalytic activity of Cu@Alg/BP was examined by evaluating the impact of numerous parameters on MO reduction. The results are expected to provide a new strategy for the removal of inorganic and organic water contaminants based on efficient and low-cost catalysts.

scholarly journals Cultivating Composting Culture Activities among Citizens and Its Beneficial to Prolong the Landfill Lifespan

2018 ◽  
Vol 34 ◽  
pp. 02021
Author(s):  
Irnis Azura Zakarya ◽  
Khairul Azri Jamial ◽  
Norazlinda Mat Tanda
Keyword(s):  
Solid Waste ◽  
Food Waste ◽  
Management Practices ◽  
Solid Waste Management ◽  
Low Cost ◽  
Organic Solid Waste ◽  
Organic Solid ◽  
Teachers And Students ◽  
Waste Management Practices ◽  
The Impact

Currently, the Ministry of Housing and Local Government manage solid waste in Malaysia, with the participation of the private sector. Food waste represents almost 60% of the total municipal solid waste disposed in the landfill. Material valorisation of food waste usually conducted by biological processes such as composting. Compost, an organic amendment, is the final product of the composting process. These processes are efficient, low cost and environmentally friendly alternative for managing food waste and are used extensively worldwide. Therefore, organic solid waste management practices program for the communities in Perlis was conducted. The main objective of this program was to instilling environment awareness especially among Perlis citizens. This study was investigated the impact of food waste or kitchen waste composting to the citizens in Perlis State and the beneficial of compost fertilizer to our environment especially in plant growth. Composting method was taught to the food premises owner, individuals, teachers, and students and their responses to the composting practices were then summarized. In future, we can prolong our landfill lifespan by practicing organic waste composting and can preserving our environment.

Computer simulation study about the dependence of amorphous silicon photonic waveguides efficiency on the material quality

2020 ◽  
Vol 90 (3) ◽  
pp. 30502
Author(s):  
Alessandro Fantoni ◽  
João Costa ◽  
Paulo Lourenço ◽  
Manuela Vieira
Keyword(s):  
Amorphous Silicon ◽  
High Throughput Screening ◽  
Simulation Analysis ◽  
Low Cost ◽  
Deposition Process ◽  
Large Area ◽  
Sidewall Roughness ◽  
Sensing Applications ◽  
Fabrication Defects ◽  
The Impact

Amorphous silicon PECVD photonic integrated devices are promising candidates for low cost sensing applications. This manuscript reports a simulation analysis about the impact on the overall efficiency caused by the lithography imperfections in the deposition process. The tolerance to the fabrication defects of a photonic sensor based on surface plasmonic resonance is analysed. The simulations are performed with FDTD and BPM algorithms. The device is a plasmonic interferometer composed by an a-Si:H waveguide covered by a thin gold layer. The sensing analysis is performed by equally splitting the input light into two arms, allowing the sensor to be calibrated by its reference arm. Two different 1 × 2 power splitter configurations are presented: a directional coupler and a multimode interference splitter. The waveguide sidewall roughness is considered as the major negative effect caused by deposition imperfections. The simulation results show that plasmonic effects can be excited in the interferometric waveguide structure, allowing a sensing device with enough sensitivity to support the functioning of a bio sensor for high throughput screening. In addition, the good tolerance to the waveguide wall roughness, points out the PECVD deposition technique as reliable method for the overall sensor system to be produced in a low-cost system. The large area deposition of photonics structures, allowed by the PECVD method, can be explored to design a multiplexed system for analysis of multiple biomarkers to further increase the tolerance to fabrication defects.

Advancing dairy farming profitability through research

2001 ◽  
pp. 17-22
Author(s):  
J.R. Caradus ◽  
D.A. Clark
Keyword(s):  
Research And Development ◽  
Dairy Cow ◽  
Low Cost ◽  
Pasture Management ◽  
Nitrogen Fertiliser ◽  
Grass Endophyte ◽  
Forage Species ◽  
Development Outcomes ◽  
Dairy Cow Nutrition ◽  
The Impact

The New Zealand dairy industry recognises that to remain competitive it must continue to invest in research and development. Outcomes from research have ensured year-round provision of low-cost feed from pasture while improving productivity. Some of these advances, discussed in this paper, include the use of white clover in pasture, understanding the impacts of grass endophyte, improved dairy cow nutrition, the use of alternative forage species and nitrogen fertiliser to improve productivity, demonstration of the impact of days-in-milk on profitability, and the use of feed budgeting and appropriate pasture management. Keywords: dairy, profitability, research and development

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

scholarly journals The impact of COVID-19 pandemic on food waste behaviour of young people

2021 ◽  
Vol 294 ◽  
pp. 126333
Author(s):  
Adriana Burlea-Schiopoiu ◽  
Radu Florin Ogarca ◽  
Catalin Mihail Barbu ◽  
Liviu Craciun ◽  
Ionut Cosmin Baloi ◽  
...  
Keyword(s):  
Young People ◽  
Food Waste ◽  
The Impact

scholarly journals Ears in the Sky: Potential of Drones for the Bioacoustic Monitoring of Birds and Bats

Drones ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 9
Author(s):  
Adrien Michez ◽  
Stéphane Broset ◽  
Philippe Lejeune
Keyword(s):  
Forest Canopy ◽  
Low Cost ◽  
Population Monitoring ◽  
Biodiversity Loss ◽  
Active Species ◽  
Terrestrial Mammals ◽  
Technical Developments ◽  
High Resolution Imagery ◽  
Human Operators ◽  
The Impact

In the context of global biodiversity loss, wildlife population monitoring is a major challenge. Some innovative techniques such as the use of drones—also called unmanned aerial vehicle/system (UAV/UAS)—offer promising opportunities. The potential of UAS-based wildlife census using high-resolution imagery is now well established for terrestrial mammals or birds that can be seen on images. Nevertheless, the ability of UASs to detect non-conspicuous species, such as small birds below the forest canopy, remains an open question. This issue can be solved with bioacoustics for acoustically active species such as bats and birds. In this context, UASs represent an interesting solution that could be deployed on a larger scale, at lower risk for the operator, and over hard-to-reach locations, such as forest canopies or complex topographies, when compared with traditional protocols (fixed location recorders placed or handled by human operators). In this context, this study proposes a methodological framework to assess the potential of UASs in bioacoustic surveys for birds and bats, using low-cost audible and ultrasound recorders mounted on a low-cost quadcopter UAS (DJI Phantom 3 Pro). The proposed methodological workflow can be straightforwardly replicated in other contexts to test the impact of other UAS bioacoustic recording platforms in relation to the targeted species and the specific UAS design. This protocol allows one to evaluate the sensitivity of UAS approaches through the estimate of the effective detection radius for the different species investigated at several flight heights. The results of this study suggest a strong potential for the bioacoustic monitoring of birds but are more contrasted for bat recordings, mainly due to quadcopter noise (i.e., electronic speed controller (ESC) noise) but also, in a certain manner, to the experimental design (use of a directional speaker with limited call intensity). Technical developments, such as the use of a winch to safely extent the distance between the UAS and the recorder during UAS sound recordings or the development of an innovative platform, such as a plane–blimp hybrid UAS, should make it possible to solve these issues.

scholarly journals An IoT-Based Participatory Antitheft System for Public Safety Enhancement in Smart Cities

Smart Cities ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 919-937
Author(s):  
Nikos Papadakis ◽  
Nikos Koukoulas ◽  
Ioannis Christakis ◽  
Ilias Stavrakas ◽  
Dionisis Kandris
Keyword(s):  
Smart Cities ◽  
Low Cost ◽  
Negative Influence ◽  
Asset Tracking ◽  
Tracking Tasks ◽  
Tracking Process ◽  
The Impact ◽  
Operation Center ◽  
Safety Enhancement ◽  
Selection Of

The risk of theft of goods is certainly an important source of negative influence in human psychology. This article focuses on the development of a scheme that, despite its low cost, acts as a smart antitheft system that achieves small property detection. Specifically, an Internet of Things (IoT)-based participatory platform was developed in order to allow asset-tracking tasks to be crowd-sourced to a community. Stolen objects are traced by using a prototype Bluetooth Low Energy (BLE)-based system, which sends signals, thus becoming a beacon. Once such an item (e.g., a bicycle) is stolen, the owner informs the authorities, which, in turn, broadcast an alert signal to activate the BLE sensor. To trace the asset with the antitheft tag, participants use their GPS-enabled smart phones to scan BLE tags through a specific smartphone client application and report the location of the asset to an operation center so that owners can locate their assets. A stolen item tracking simulator was created to support and optimize the aforementioned tracking process and to produce the best possible outcome, evaluating the impact of different parameters and strategies regarding the selection of how many and which users to activate when searching for a stolen item within a given area.

Sign in / Sign up

Export Citation Format

Share Document