scholarly journals Passive Fire Protection of Taeda pine Wood by Using Starch-Based Surface Coatings

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3841
Author(s):  
Svetlana Tretsiakova-McNally ◽  
Adeline Le Douarin ◽  
Paul Joseph ◽  
Malavika Arun
Keyword(s):  
Fire Protection ◽  
Thermo Gravimetric Analysis ◽  
Control Sample ◽  
Untreated Wood ◽  
Inorganic Salts ◽  
Gravimetric Analysis ◽  
Pine Wood ◽  
Passive Fire Protection ◽  
Ft Ir ◽  
Wood Surfaces

The present paper reports the preliminary results relating to the development, subsequent application, and testing of environmentally benign starch-based formulations for passive fire protection of wood substrates. This study evaluated the effectiveness of starch colloid coatings applied onto the wood surface with a view to improving its performance when exposed to the external heat flux (35 kW/m2) during cone calorimetric tests. The formulations were prepared from aqueous colloid solutions of either starch alone, or in combination with inorganic salts, such as: sodium carbonate, Na2CO3, potassium carbonate, K2CO3, and diammonium hydrogen phosphate, (NH4)2HPO4. The fire performance of Taeda pine wood samples, where their top surfaces were treated with these formulations, was compared with the control sample. The thermal and combustion characteristics of the tested samples were determined with the aid of thermo-gravimetric analysis (TGA), bomb and cone calorimetric techniques, and a steady state tube furnace coupled to an FT-IR spectrometer. A significant boost of fire protection was observed when starch formulations with added inorganic salts were applied onto the wood surfaces, compared with the control sample. For example, the presence of K2CO3 in starch colloid solutions resulted in a notable delay of the ignition and exhibited a reduction in the heat release parameters in comparison with the untreated wood substrate.

Synthesis, characterization and corrosion protection properties of polyN-(p-bromophenyl)-2-methacrylamide-co-glycidyl methacrylate on low nickel stainless steel

2011 ◽  
Vol 31 (2-3) ◽  
Author(s):  
Sakvai Mohammed Safiullah ◽  
Deivasigamani Thirumoolan ◽  
Kottur Anver Basha ◽  
K. Mani Govindaraju ◽  
Dhanraj Gopi ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Corrosion Protection ◽  
Glycidyl Methacrylate ◽  
Electrochemical Impedance ◽  
Thermo Gravimetric Analysis ◽  
Gel Permeation Chromatography ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Protection Efficiency ◽  
Ft Ir

Abstract The synthesis of copolymers from different feed ratios of N-(p-bromophenyl)-2- methacrylamide (PBPMA) and glycidyl methacrylate (GMA) was achieved by using free radical solution polymerization technique and characterized using FT-IR, 1H and 13C NMR spectroscopy. The thermal stability of the synthesized copolymers was studied using thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The molecular weight of the copolymer is determined by gel permeation chromatography (GPC). The corrosion performances of low nickel stainless steel specimens dip coated with different composition of copolymers were investigated in 0.5 M H2SO4 using potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) techniques. The polarization and impedance measurements showed different corrosion protection efficiency with change in composition of the copolymers. It was found that the corrosion protection properties are owing to the barrier effect of the polymer layer covered on the low nickel stainless steel surfaces. However, it is observed that the mole ratio of PBPMA and GMA plays a major role in the protective nature of the copolymer.

Effect of Synthesis Temperature on Particles Size and Morphology of Zirconium Oxide Nanoparticle

2017 ◽  
Vol 50 ◽  
pp. 18-31 ◽  
Author(s):  
Rudzani Sigwadi ◽  
Simon Dhlamini ◽  
Touhami Mokrani ◽  
Patrick Nonjola
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Zirconium Oxide ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Crystallite Sizes ◽  
Ft Ir

The paper presents the synthesis and investigation of zirconium oxide (ZrO2) nanoparticles that were synthesised by precipitation method with the effects of the temperatures of reaction on the particles size, morphology, crystallite sizes and stability at high temperature. The reaction temperature effect on the particle size, morphology, crystallite sizes and stabilized a higher temperature (tetragonal and cubic) phases was studied. Thermal decomposition, band structure and functional groups were analyzed by Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Thermo-gravimetric analysis (TGA) and Fourier transform infrared (FT-IR). The crystal structure was determined using X-ray diffraction. The morphology and the particle size were studied using (SEM) and (TEM). The shaped particles were confirmed through the SEM analysis. The transmission electron microscopic analysis confirmed the formation of the nanoparticles with the particle size. The FT-IR spectra showed the strong presence of ZrO2 nanoparticles.

Grafting of Chitosan: Structural, Thermal and Antimicrobial Properties

2019 ◽  
Vol 41 (2) ◽  
pp. 240-240
Author(s):  
Nevin Cankaya Nevin Cankaya
Keyword(s):  
Antimicrobial Activity ◽  
Graft Copolymers ◽  
Thermo Gravimetric Analysis ◽  
Antimicrobial Properties ◽  
Gravimetric Analysis ◽  
Analysis Method ◽  
Methacryloyl Chloride ◽  
Thermo Gravimetric ◽  
Thermal Stabilities ◽  
Ft Ir

In this study, some new chitosan materials were synthesized by the grafting of chitosan with the monomers such as 1-vinylimidazole (VIM), methacrylamide (MAm) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS). First of all, chitosan methacrylate was prepared by esterification of primary -OH group with methacryloyl chloride a 25.13% yield by mole. The monomers were grafted into chitosan methacrylate via free radical polymerization using 2,2and#39;-Azobisisobutyronitrile as an initiator in N,N-dimethylformamide. The graft copolymers were characterized by FT-IR spectra and elemental analysis. Thermal stabilities of the graft copolymers were determined by TGA (thermo gravimetric analysis) method. The synthesized chitosan methacrylate and its graft copolymers were tested for their antimicrobial activity against bacteria and yeast.

Functionalization of α-ZrP by 1,2-Epoxypropane for Further Modification

2017 ◽  
Vol 898 ◽  
pp. 2347-2353
Author(s):  
Ahmed Hossamaldin ◽  
Ping Liu ◽  
Ya Du ◽  
Xiao Ze Jiang ◽  
Bin Sun ◽  
...  
Keyword(s):  
Epoxy Group ◽  
Thermo Gravimetric Analysis ◽  
Mas Nmr ◽  
Interlayer Distance ◽  
Gravimetric Analysis ◽  
Thermo Gravimetric ◽  
Grafting Ratio ◽  
Internal Surfaces ◽  
Carbon Mass ◽  
Ft Ir

To prepare alpha zirconium phosphate (α-ZrP) with high interlayer distance, grafting ratio and thermal stability, 1,2-epoxypropane was used to modify α-ZrP as the epoxy group reacting with P-OH on the external and internal surfaces of α-ZrP to form P-O-C bonds after small amines pre-intercalation. Different characterization techniques were used, including X-ray Powder Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Thermo-Gravimetric Analysis (TGA) and Carbon Mass Nuclear Magnetic Resonance (13C MAS NMR). The results of XRD confirmed the pre-intercalation of amino-propane and the intercalation of 1,2-epoxypropane, as the interlayer distance increased from 7.5 Å to 16.9 Å and 15.3 Å, respectively. FT-IR and 13C MAS NMR results confirmed the formation of P-O-C bonds between 1,2-epoxypropane and α-ZrP. TGA analysis showed that the grafting ratio of 1,2-epoxypropane was 19.44%.

Biosynthesis and Characterization of Copper Nanoparticles Using a Bioflocculant Extracted from Alcaligenis faecalis HCB2

2019 ◽  
Vol 11 (11) ◽  
pp. 1064-1070 ◽  
Author(s):  
Nkosinathi G. Dlamini ◽  
Albertus K. Basson ◽  
V. S. R. Rajasekhar Pullabhotla
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Copper Nanoparticles ◽  
Average Particle Size ◽  
Thermo Gravimetric Analysis ◽  
Average Particle ◽  
Gravimetric Analysis ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir

Bioflocculant from Alcaligenis faecalis HCB2 was used in the eco-friendly synthesis of the copper nanoparticles. Nanoparticles were characterized using a scanning electron microscope (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy, thermo gravimetric analysis (TGA) and Fourier Transform Infrared Spectroscopy (FT-IR). The transmission electron microscopy images showed close to spherical shapes with an average particle size of ∼53 nm. Energy-dispersive X-ray spectroscopy analysis confirmed the presence of the Cu nanopartilces and also the other elements such as O, C, P, Ca, Cl, Na, K, Mg, and S originated from the bioflocculant. FT-IR results showed the presence of the –OH and –NH2 groups, aliphatic bonds, amide and Cu–O bonds. Powder X-ray diffraction peaks confirmed the presence of (111) and (220) planes of fcc structure at 2 of 33° and 47° respectively with no other impurity peaks.

scholarly journals Promoting Effect of Inorganic Alkali on Carbon Dioxide Adsorption in Amine-Modified MCM-41

2016 ◽  
Author(s):  
Yang Teng ◽  
Lijiao Li ◽  
Gang Xu ◽  
Kai Zhang ◽  
Kaixi Li
Keyword(s):  
Co2 Adsorption ◽  
Thermo Gravimetric Analysis ◽  
Critical Factor ◽  
Hydroxyl Groups ◽  
Gravimetric Analysis ◽  
Carbon Dioxide Adsorption ◽  
Dependence Relation ◽  
Promoting Effect ◽  
Ft Ir ◽  
Mcm 41

Three kinds of inorganic alkali are introduced into tetraethylenepentamine (TPEA) and polyethyleneimine (PEI) modified MCM-41 as the CO2 adsorbents. FT-IR and TGA are used to characterize the surface groups and the thermal stability of adsorbents. Chemical titration method is used to measure the alkali amounts of adsorbents. Thermo-gravimetric analysis with 10%CO2/N2 as the simulated flue gas is used to test the CO2 adsorption performance of adsorbents. The results show that all three kinds of inorganic alkali containing adsorbents exhibit promoted CO2 adsorption capability than traditional TPEA and PEI modified samples. Ca(OH)2 and PEI modified samples exhibit the highest adsorption capacity and stable regeneration property. The introduction of inorganic alkali changes the chemical adsorption mechanism between CO2 and increases the effective alkali amounts due to its hydroxyl groups. The CO2 adsorption capacities have a linear dependence relation with the alkali amounts of adsorbents, indicating that alkali amount is a critical factor for novel adsorbents exploring.

scholarly journals In vitro Complexation of Olmesartan Medoxomil with Dapagliflozin, Vildagliptin and Metformin

2019 ◽  
Vol 18 (2) ◽  
pp. 271-280 ◽  
Author(s):  
Fahima Aktar ◽  
Md Zakir Sultan ◽  
Mohammad A Rashid
Keyword(s):  
Drug Interactions ◽  
Thermo Gravimetric Analysis ◽  
Olmesartan Medoxomil ◽  
Therapeutic Agents ◽  
Gravimetric Analysis ◽  
Thermochemical Properties ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Ft Ir

Drug-drug interactions have been a serious concern for pharmacokinetics, pharmacodynamics and pharmacological profiles of therapeutic agents. The aim of this study was to carry out interactions of olmesartan medoxomil with dapagliflozin, vildagliptin and metformin, which were confirmed by TLC, HPLC and FT-IR. The newly formed complexes showed characteristic thermochemical properties in differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). In TLC, three spots from the three complexes were found to be different from their precursor drugs. In HPLC chromatograms, the Rt (retention time) of the pure olmesartan medoxomil, dapagliflozin, vildagliptin and metformin were found to be different from their respective complexes. The FT-IR spectra obtained for drug-drug interactions were seen to demonstrate new pattern of peaks compared to pure drugs. The DSC and TGA thermograms of olmesartan medoxomil, dapagliflozin, vildagliptin and metformin were also found to be different from their complexes. All these variations from parent compounds indicated the formation of new complexes. Dhaka Univ. J. Pharm. Sci. 18(2): 271-180, 2019 (December)

Preparation and Characterization of Sulfonated Imide-Grafted Poly(ethersulfone)s

2011 ◽  
Vol 695 ◽  
pp. 45-48
Author(s):  
Dong Wan Seo ◽  
Young Don Lim ◽  
Soon Ho Lee ◽  
Md. Monirul Islam ◽  
Hyun Mi Jin ◽  
...  
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Chlorosulfonic Acid ◽  
Exchange Capacity ◽  
Gravimetric Analysis ◽  
Thermo Gravimetric ◽  
Ion Exchange Capacity ◽  
H Nmr ◽  
Triethyl Amine ◽  
Ft Ir

Poly(ethersulfone)s carrying pendant sulfonated imide side group. The first step in the preparation involved nitration of poly(ethersulfone) (ultrason®-S6010), with ammonium nitrate and trifluoroacetic anhydride resulting in the nitrated poly(ethersulfone) (NO2-PES). In the second step, the nitro groups on polymer were reacted with tin(II)chloride and sodium iodide as reducing agents for creating the amino poly(ethersulfone) (NH2-PES). The imide-poly(ethersulfone)s (IPES) were obtained by reaction of phthalic anhydride and the amino-poly(ethersulfone) with triethyl amine. The sulfonated imide-poly(ethersulfone)s (SIPES) were prepared by chlorosulfonic acid. The different degrees of sulfonated imide units of poly(ethersulfone) were successfully synthesized by an optimized condition. The Sulfonated imide-poly(ethersulfone)s (SIPES) were studied by FT-IR,1H-NMR spectroscopy and thermo gravimetric analysis(TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water. The ion exchange capacity (IEC) and proton conductivity of SIPES membranes were evaluated with increase of degree of sulfonation. The water uptake of synthesized SIPES membranes exhibit 30 ~ 65 % compared with 28 % of Nafion 211®. The SIPES membranes exhibit proton conductivities (25 °C) of 1.21 ~ 2.62´10-3S/cm compared with 3.37´10-3S/cm of Nafion 211®.

scholarly journals Rapid Four-component Synthesis of Dihydropyrano[2,3-c]pyrazoles using Nano-egg Shell/Ti(IV) as a Highly Compatible Natural Based Catalyst

2020 ◽  
Author(s):  
Arefeh Dehghani Tafti ◽  
Bi BiFatemeh Mirjalili ◽  
Abdolhamid Bamoniri ◽  
Naeimeh Salehi
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Reaction Times ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solvent Free Conditions ◽  
Ft Ir ◽  
Egg Shell ◽  
High Yields ◽  
Work Up

Abstract Nano-egg shell/Ti(IV) (NEST) as a novel naturally based catalyst was prepared, characterized and applied for the synthesis of dihydropyrano[2,3-c]pyrazole [DHPP] derivatives. The characterization of NEST was performed using Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy-Dispersive X-ray Spectroscopy (EDX), and Thermo Gravimetric Analysis (TGA). DHPPs were synthesized in the presence of NEST via a four component reaction of aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate at room temperature under solvent free conditions. The principal affairs of this procedure are easy work-up, high yields of pure products without the use of any toxic organic solvents, mild condition and short reaction times.

Preparation of Xanthan Gum-G-N-Vinylpyrrolidone by Radiation and Adsorption Property of Phenol and Polyphenol

2011 ◽  
Vol 236-238 ◽  
pp. 2694-2700 ◽  
Author(s):  
Yong Fu Li ◽  
Yi Ming Ha ◽  
Le Ren Tao ◽  
Yan Jie Li ◽  
Feng Wang
Keyword(s):  
Xanthan Gum ◽  
Ph Value ◽  
Adsorption Property ◽  
Thermo Gravimetric Analysis ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Grafting Reaction ◽  
Ft Ir ◽  
Simultaneous Radiation Grafting ◽  
Thermal Stability Of

Simultaneous radiation grafting method（60Co γ as radiation source）was used to prepare xanthan gum - graft - N-Vinypyrrolidone (XG-g-NVP). FT-IR spectra showed that grafting reaction occurred in NVP Vinyl part and lactam structure was retained. Thermo gravimetric analysis showed that, XG-g-NVP enhanced thermal stability of xanthan gum. XRD showed the crystallinity increased after grafting. At the grafting yield of 623%, XG-g-NVP had the maximum adsorption capacity of phenol and TP, the adsorption amount of which were 0.76 g/g and 2.85 g/g respectively. PH value had the different effects on the adsorption of phenol and tea polyphenols by XG-g-NVP.

Sign in / Sign up

Export Citation Format

Share Document