scholarly journals Development of Antibacterial Biocomposites Based on Poly(lactic acid) with Spice Essential Oil (Pimpinella anisum) for Food Applications

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3791
Author(s):  
Negin Noori ◽  
Ali Khanjari ◽  
Mohammadreza Rezaeigolestani ◽  
Ioannis K. Karabagias ◽  
Sahar Mokhtari
Keyword(s):  
Lactic Acid ◽  
Essential Oil ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Principal Component ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Dependent Manner ◽  
Concentration Dependent Manner ◽  
Active Food Packaging

Among the main biodegradable food packaging materials, poly-lactic acid (PLA) is a commercially successful polymer used notably in the food packaging industry. In this study, active PLA films containing different percentage of anise essential oil (AE) (0, 0.5, 1 and 1.5% v/v) were developed, and characterized by physical, mechanical and antibacterial analysis. Based on physical examinations, thermal stability of PLA/AE films was greater than the neat PLA film, and the minimum water vapor permeability (WVP) was recorded for PLA/0.5AE film (1.29 × 10 11 g/m s), while maximum WVP was observed for PLA/1.5AE (2.09 × 1011 g/m s). Moreover, the lightness and yellowness of the composites were decreased by the addition of AE. For the PLA composites with 1.5% AE, the tensile strength decreased by 35% and the elongation break increased by 28.09%, comparing to the pure PLA. According to the antibacterial analysis, the minimum inhibitory concentrations of PLA/AE film were 5 to 100 mg/mL and the active composite could create visible inhibition zones of 14.2 to 19.2 mm. Furthermore, the films containing AE inhibited L. monocytogenes and V. parahaemolyticus in a concentration-dependent manner. The confirmation of the success of the incorporation of EOs into the PLA films was further evaluated using principal component analysis, where positive results were obtained. In this context, our findings suggest the significant potency of AE to be used as an antibacterial agent in active food packaging.

Physical Properties and Antimicrobial Activity of a Poly(Lactic Acid)/Poly(Trimethylene Carbonate) Film Incorporated with Thymol

2014 ◽  
Vol 884-885 ◽  
pp. 481-484 ◽  
Author(s):  
Yan Wu ◽  
Ming Wei Yuan ◽  
Ji Yi Yang ◽  
Yu Yue Qin ◽  
Ming Long Yuan ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Lactic Acid ◽  
Water Vapor ◽  
Composite Film ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Antimicrobial Activities ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Trimethylene Carbonate

Thymol (TH), which has antimicrobial effect on many food pathogens, was incorporated as antimicrobial agent into composite poly (lactic acid)/poly (trimethylene carbonate)(PLA-PTMC) films. Antimicrobial active films based on PLA-PTMC were prepared by incorporating thymol at five different concentrations: 0, 3, 6, 9 and 12 %(w/w). The mechanical characterization, water vapor permeability (WVP), and antimicrobial activity of all formulations composite film were carried out. A decrease in elastic modulus was obtained for the active composite film compared with neat PLA-PTMC film. The presence of thymol decreased water vapor permeability, with a significant antimicrobial activity. Antimicrobial activities of films were tested against Escherichia coli, Staphylococcus aurous, Listeria, Bacillus subtilis, and Salmonella. Increasing amount of the thymol in the film caused a significant increase in inhibitory zones. These results suggest that thymol incorporated PLA-PTMC films have a prospectively potential in antimicrobial food packaging.

scholarly journals Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

2015 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Matheus Luz Alberti ◽  
Sílvio José De Souza ◽  
Heliberto Gonçalves ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Pilot Scale ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

<p>The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed.</p><p>&nbsp;</p><p>DOI: 10.14685/rebrapa.v6i1.208</p><p>&nbsp;</p>

scholarly journals Angelica Essential Oil Loaded Electrospun Gelatin Nanofibers for Active Food Packaging Application

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 299 ◽  
Author(s):  
Ying Zhou ◽  
Xiaomin Miao ◽  
Xingzi Lan ◽  
Junren Luo ◽  
Tingting Luo ◽  
...  
Keyword(s):  
Essential Oil ◽  
Food Packaging ◽  
Inhibitory Effect ◽  
Proton Nuclear Magnetic Resonance ◽  
Dependent Manner ◽  
Hydrophobic Property ◽  
Concentration Dependent Manner ◽  
Gram Positive Bacteria ◽  
Active Food Packaging ◽  
Electrospun Gelatin

The development of food packaging possessing bioactivities which could extend the shelf life of food has gained increased interest in recent years. In this study, gelatin nanofibers with encapsulated angelica essential oil (AEO) were fabricated via electrospinning. The morphology of gelatin/AEO nanofibers was examined by scanning electron microscopy (SEM) and the addition of AEO resulted in the increase of fiber diameter. The proton nuclear magnetic resonance (1H-NMR) spectra were measured to confirm the presence of AEO in nanofibers. The hydrophobic property of gelatin nanofibers was also found to be improved with the addition of AEO. The nanofibers incorporated with AEO showed significant antioxidant activity and inhibitory effect against both Gram-negative and Gram-positive bacteria in a concentration dependent manner. Furthermore, the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay demonstrated that the developed gelatin/AEO nanofibers revealed no cytotoxicity effect. Thus, gelatin nanofibers incorporated with AEO can be used as potential food packaging.

Physical Properties and Antimicrobial Activity of a Poly(lactic acid)/poly(ε-caprolactone) Film Antimicrobial Coating with Chitosan

2014 ◽  
Vol 900 ◽  
pp. 320-323
Author(s):  
Ming Wei Yuan ◽  
Yan Wu ◽  
Yu Yue Qin ◽  
Ming Long Yuan ◽  
Hong Li Li
Keyword(s):  
Antimicrobial Activity ◽  
Lactic Acid ◽  
Water Vapor ◽  
Physical Properties ◽  
Food Packaging ◽  
Mechanical Characterization ◽  
Water Vapor Permeability ◽  
Antimicrobial Activities ◽  
Poly Lactic Acid ◽  
Vapor Permeability

In this work a preliminary study on the physical properties and antimicrobial activity of environmentally friendly active films to be produced is presented. Chitosan (CH), which has antimicrobial effect on many food pathogens, was coated as antimicrobial agent into composite poly (lactic acid)/poly (ε-caprolactone)(PLA-PCL) films. Antimicrobial active films based on PLA-PCL were prepared by coating five different chitosan concentrations: 0, 2, 4, 6 and 8 %(w/w). The mechanical characterization, water vapor permeability (WVP), and antimicrobial activity of composite PLA-PCL film coating with chitosan were carried out. The mechanical characterization, water vapor permeability of composite PLA-PCL films coating with chitosan was uninfluenced. Antimicrobial activities of films were tested against Staphylococcus aurous, Escherichia coli, Bacillus subtilis, Listeria, Salmonella. The antimicrobial activity of films were significantly increase with the chitosan concentration. The results of this work suggest that chitosan coated composite PLA-PCL films have a prospectively potential in antimicrobial activity food packaging.

Physical Properties and Antibacterial Activity of a Chitosan Film Incorporated with Lavender Essential Oil

2013 ◽  
Vol 706-708 ◽  
pp. 197-200 ◽  
Author(s):  
Zhi Hong Zhang ◽  
Yu Yue Qin ◽  
Jian Fan ◽  
Tian Rui Zhao ◽  
Chun Sheng Cheng
Keyword(s):  
Mechanical Property ◽  
Antibacterial Activity ◽  
Water Vapor ◽  
Essential Oil ◽  
Food Packaging ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Active Food Packaging ◽  
The Impact

Chitosan-based films containing lavender essential oil (LEO) (0, 0.5%, 1.0%, 1.5% (v/v)) were prepared to evaluate their physical and antibacterial activities. In order to study the impact of the incorporation of LEO into chitosan matrix, the solubility, mechanical property, water vapor permeability, and antibacterial activity of the films were investigated. Fourier transform infrared chromatography (FTIR) was carried out to explain structure–property relationships. Results showed that the solubility and water vapor permeability of the chitosan-based film decreased by LEO incorporation. Films containing LEO showed better mechanical property. FTIR spectra demonstrated good interaction between functional groups of chitosan with LEO. With the concentration of LEO increased from 0 to 1.5 %, the inhibitory zone of four bacterial strains (Escherichia coli, Staphylococcus aurous, Bacillus magaterium, Bacillus subtilis) increased. It can be concluded that chitosan films containing LEO can be used for development of active food packaging materials.

scholarly journals Water barrier and mechanical properties of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly(lactic acid) (PLA) blend bionanocomposites

2021 ◽  
Vol 10 (1) ◽  
pp. 431-442
Author(s):  
Asmawi Nazrin ◽  
Salit Mohd Sapuan ◽  
Mohamed Yusoff Mohd Zuhri ◽  
Intan Syafinaz Mohamed Amin Tawakkal ◽  
Rushdan Ahmad Ilyas
Keyword(s):  
Lactic Acid ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Mechanical Analysis ◽  
Polymer Chains ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Toxic Substances ◽  
Plastic Wastes ◽  
Recycled Plastics

Abstract The disposal of non-biodegradable synthetic plastic wastes is linked with air, land, and marine pollutions. Incineration of plastic wastes released toxic substances into the air while recycled plastics end up accumulated in landfill and dumped into the ocean. In this study, novel sugar palm starch reinforced with sugar palm crystalline nanocellulose was blended with poly(lactic acid) (PLA) with various formulations to develop alternative materials potentially substituting conventional plastics. X-ray diffraction analysis demonstrated broad amorphous scattering background with minor diffraction peaks at 2θ of 19.4° and 22° associated with VH-type and B-type crystal structure for all blend bionanocomposites samples. Higher solubility rates were observed for PLA20TPS80 (96.34%) and PLA40TPS60 (77.66%) associated with higher concentration of plasticizers providing extra space in the polymer chains to be penetrated by water molecules. Increasing PLA content was not necessarily enhancing the water vapor permeability rate. Dynamic mechanical analysis presented a significant increment in storage modulus (E′) for PLA60TPS40 (53.2%) compared to the trivial changes of PLA70TPS30 (10%) and PLA80TPS20 (0.6%). However, significant improvement in impact strength occurred only at PLA40TPS60 (33.13%), and further addition showed minor improvement between 12 and 20%. Overall, it is noted that PLA60TPS40 demonstrated adequate functional properties to be used in food packaging application.

Sustainable Active Food Packaging from Poly(lactic acid) and Cocoa Bean Shells

2019 ◽  
Vol 11 (34) ◽  
pp. 31317-31327 ◽  
Author(s):  
Evie L. Papadopoulou ◽  
Uttam C. Paul ◽  
Thi Nga Tran ◽  
Giulia Suarato ◽  
Luca Ceseracciu ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Food Packaging ◽  
Poly Lactic Acid ◽  
Cocoa Bean ◽  
Active Food Packaging
Sign in / Sign up

Export Citation Format

Share Document