scholarly journals Development, Investigation, and Comparative Study of the Effects of Various Metal Oxides on Optical Electrochemical Properties Using a Doped PANI Matrix

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3344
Author(s):  
Amina Bekhoukh ◽  
Imane Moulefera ◽  
Lilia Sabantina ◽  
Abdelghani Benyoucef
Keyword(s):  
Comparative Study ◽  
Electrochemical Properties ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
In Situ Polymerization ◽  
Polymeric Matrix ◽  
Hybrid Nanocomposites ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Pani Matrix

A comparative study was performed in order to analyze the effect of metal oxide (MO) on the properties of a polymeric matrix. In this study, polyaniline (PANI)@Al2O3, PANI@TiC, and PANI@TiO2 nanocomposites were synthesized using in situ polymerization with ammonium persulfate as an oxidant. The prepared materials were characterized by various analytical methods such as X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), UV/visible (UV/Vis) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). Furthermore, the conductive properties of the materials were tested using the four-point probe method. The presence of MO in the final product was confirmed by XPS, XRD, FTIR, and TEM, while spectroscopic characterization revealed interactions between the MOs and PANI. The results showed that the thermal stability was improved when the MO was incorporated into the polymeric matrix. Moreover, the results revealed that incorporating TiO2 into the PANI matrix improves the optical bandgap of the nanocomposite and decreases electrical conductivity compared to other conducting materials. Furthermore, the electrochemical properties of the hybrid nanocomposites were tested by cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD). The obtained results suggest that the PANI@TiO2 nanocomposite could be a promising electrode material candidate for high-performance supercapacitor applications.

SYNTHESIS AND ELECTROCHEMICAL PROPERTIES OF GRAPHENE/MnO2/CONDUCTING POLYMER TERNARY COMPOSITE FOR SUPERCAPACITORS

NANO ◽  
2013 ◽  
Vol 08 (01) ◽  
pp. 1350004 ◽  
Author(s):  
JINXIAN LIN ◽  
YUYING ZHENG ◽  
QIFENG DU ◽  
MINGPING HE ◽  
ZHONGWEN DENG
Keyword(s):  
Electrochemical Properties ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Cycling Performance ◽  
Great Promise ◽  
Cycle Stability ◽  
X Ray Diffraction ◽  
Step Method ◽  
Ternary Composite ◽  
X Ray

Graphene(RGO)/ MnO2 /[N-butyl-3,6-carbazolevinylene-alt-(2,5-dioctyloxy)-p-phenylenevinylene] (PPH–CAR) ternary nanocomposite is fabricated by a simple two-step method, which includes electrochemical reduction of graphene oxide (GO) and oxidation of Mn(CH3COO)2 simultaneously and an ultrathin PPH–CAR layer coated on the RGO/ MnO2 surface. The structure of the composite is investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and field-emission scanning electron microscopy (FESEM). The results suggest that the composite is correctly synthesized and each component has good dispersion. Cycle voltammetry (CV), charge and discharge measurements and cycle stability test are used to evaluate its electrochemical performance. Because of the synergistic effect of each component, the composite exhibits excellent electrochemical properties with specific capacitance of 175 F/g, which is a 46% increase compared with RGO/ MnO2 . Moreover, it reveals outstanding cycling performance with more than 90% capacitance retention over 1000 cycles. Such ternary composite is a candidate for high performance supercapacitors with great promise.

scholarly journals Novel Carbon Dots Derived from Glycyrrhizae Radix et Rhizoma and Their Anti-Gastric Ulcer Effect

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1512
Author(s):  
Yuhan Liu ◽  
Meiling Zhang ◽  
Jinjun Cheng ◽  
Yue Zhang ◽  
Hui Kong ◽  
...  
Keyword(s):  
Gastric Ulcer ◽  
Photoelectron Spectroscopy ◽  
Carbon Dots ◽  
High Performance ◽  
Raw264.7 Cells ◽  
Mice Model ◽  
X Ray ◽  
Glycyrrhizae Radix ◽  
Transmission Electron ◽  
High Resolution Tem

Glycyrrhizae Radix et Rhizoma (GRR) is one of the commonly used traditional Chinese medicines in clinical practice, which has been applied to treat digestive system diseases for hundreds of years. GRR is preferred for anti-gastric ulcer, however, the main active compounds are still unknown. In this study, GRR was used as precursor to synthesize carbon dots (CDs) by a environment-friendly one-step pyrolysis process. GRR-CDs were characterized by using transmission electron microscopy, high-resolution TEM, fourier transform infrared, ultraviolet-visible and fluorescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and high-performance liquid chromatography. In addition, cellular toxicity of GRR-CDs was studied by using CCK-8 in RAW264.7 cells, and the anti-gastric ulcer activity was evaluated and confirmed using mice model of acute alcoholic gastric ulcer. The experiment confirmed that GRR-CDs were the spherical structure with a large number of active groups on the surface and their particle size ranged from 2 to 10 nm. GRR-CDs had no toxicity to RAW264.7 cells at concentration of 19.5 to 5000 μg/mL and could reduce the oxidative damage of gastric mucosa and tissues caused by alcohol, as demonstrated by restoring expression of malondialdehyde, superoxide dismutase and nitric oxide in serum and tissue of mice. The results indicated the explicit anti-ulcer activity of GRR-CDs, which provided a new insights for the research on effective material basis of GRR.

Silver mirror reaction metallized chromatography paper for supercapacitor application

2021 ◽  
Author(s):  
I-Hsuan Chen ◽  
Jung-Hsien Chang ◽  
Ren-Jie Xie ◽  
Chia-Hui Tseng ◽  
Sheng-Rong Hsieh ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Cost Effective ◽  
Water Contact ◽  
X Ray ◽  
Supercapacitor Application ◽  
Resource Limited ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

Abstract In this study, the easy-to-operate silver mirror reaction (SMR) was used for metallizing chromatography paper. The SMR-metallized paper was characterized by water contact angle measurements, a surface profiler, X-ray photoelectron spectroscopy, UV-vis spectroscopy, X-ray diffraction, and electrical resistance measurement. The characterization results show that Ag was successfully synthesized on cellulose fibers and was electrically conductive after cyclic bending. Moreover, this SMR-metallized paper was used as electrodes for fabricating a supercapacitor. This SMR-metallized paper could be used for realizing cost-effective flexible electronics applied in on-site biochemical sensing in resource-limited settings.

Use of anti-solvent to enhance thermoelectric response of hybrid-halide perovskite thin films

2022 ◽  
Author(s):  
Shrikant SAINI ◽  
Izuki Matsumoto ◽  
Sakura Kishishita ◽  
Ajay Kumar Baranwal ◽  
Tomohide Yabuki ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Cost Effective ◽  
Performance Tuning ◽  
Charge Carrier Density ◽  
X Ray ◽  
Thermoelectric Energy Harvesting ◽  
Halide Perovskite

Abstract Hybrid halide perovskite has been recently focused on thermoelectric energy harvesting due to the cost-effective fabrication approach and ultra-low thermal conductivity. To achieve high performance, tuning of electrical conductivity is a key parameter that is influenced by grain boundary scattering and charge carrier density. The fabrication process allows tuning these parameters. We report the use of anti-solvent to enhance the thermoelectric performance of lead-free hybrid halide perovskite, CH3NH3SnI3, thin films. Thin films with anti-solvent show higher connectivity in grains and higher Sn+4 oxidation states which results in enhancing the value of electrical conductivity. Thin films were prepared by a cost-effective wet process. Structural and chemical characterizations were performed using x-ray diffraction, scanning electron microscope, and x-ray photoelectron spectroscopy. The value of electrical conductivity and the Seebeck coefficient were measured near room temperature. The high value of power factor (1.55 µW/m.K2 at 320 K) was achieved for thin films treated with anti-solvent.

Influence of Acid-Treated Carbon Nano-Tubes on the Microstructure and Properties of Carbon Nano-Tubes Polyurethane Composites

2010 ◽  
Vol 146-147 ◽  
pp. 805-809
Author(s):  
Ji You Gu ◽  
Lan Zhang ◽  
Xian Kai Jiang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Acid Treatment ◽  
In Situ Polymerization ◽  
Mechanical Analysis ◽  
X Ray ◽  
Carbon Nano Tubes ◽  
Dynamic Storage ◽  
Treated Carbon ◽  
Polyurethane Composites

The investigations including the acid treatment to multi-walled carbon nano-tubes (MWNTs) and the synthesis of MWNTs/polyurethane composites via in situ polymerization were done. X-ray Photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA) were utilized for evaluating the effects of acid-treated MWNTs on the properties and microstructure of the composites. The results indicated that carboxyl groups could be successfully introduced onto the surface of MWNTs by acid treatment. The dynamic storage modulus and glass transition temperature of composites increased with the existence of MWNTs. The improvement of polyurethane by acid-treated MWNTs performed better compared to raw MWNTs.

scholarly journals Chlorination Treatment of Meta-Aramid Fibrids and Its Effects on Mechanical Properties of Polytetramethylene Ether Glycol/Toluene Diisocyanate (PTMEG/TDI)-Based Polyurethane Composites

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1794 ◽  
Author(s):  
Lu ◽  
Yi ◽  
Ning ◽  
Ge ◽  
S.M.
Keyword(s):  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Mechanical Performance ◽  
In Situ Polymerization ◽  
Dynamic Contact Angle ◽  
Dynamic Contact ◽  
Toluene Diisocyanate ◽  
Sodium Dichloroisocyanurate ◽  
Polyurethane Composites ◽  
Chemical Groups

Meta-aramid fibrids (MAF) have attracted much attention. However, it is difficult for this high mechanical performance fiber to form sufficient interface adhesion between the MAF and polyurethane (PU) matrix due to the chemical inertness of its surface. Thus, the surface activity of MAF should be improved to obtain a high-performance MAF/PU composite. A novel methodology to modify the surface of MAF with a sodium dichloroisocyanurate solution (DCCNa) was developed to obtain chlorinated MAF (MAFC) in this study. A series of MAFC/PU composites was prepared by in situ polymerization processes. The results of Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated that the chlorine-contained chemical groups were introduced onto the MAF surfaces after chlorination. Dynamic contact angle analysis (DCAA) revealed that the surface wettability and the surface free energy of the MAFC were significantly improved, which allowed for strong chemical bonding to PU. Scanning electron microscopy (SEM) showed a uniform distribution of MAFC and good interfacing bonding between the MAFC and PU. With the incorporation of 1.5 wt% MAFC into the polyurethane matrix, the tensile and tear strength values of MAFC/PU were 36.4 MPa and 80.1 kN·m−1 respectively, corresponding to improvements of approximately 43.3% and 21.1%, as compared to those of virgin PU as 25.4 MPa and 66.1 kN·m−1, respectively.

scholarly journals Towards chemically neutral carbon cleaning processes: plasma cleaning of Ni, Rh and Al reflective optical coatings and thin Al filters for free-electron lasers and synchrotron beamline applications

2018 ◽  
Vol 25 (6) ◽  
pp. 1642-1649 ◽  
Author(s):  
Harol Moreno Fernández ◽  
Marco Zangrando ◽  
Guillaume Sauthier ◽  
Alejandro R. Goñi ◽  
Vincent Carlino ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free Electron ◽  
Inductively Coupled Plasma ◽  
High Performance ◽  
Extreme Ultraviolet ◽  
Filter Material ◽  
Gas Mixture ◽  
Carbon Contamination ◽  
X Ray ◽  
Chemical Surface

The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are common materials used as reflective coatings for (soft) X-ray mirrors. Similarly, aluminium is one of the most commonly used materials for extreme ultraviolet and soft X-ray transmission filters. However, both of these types of optics are subject to carbon contamination, which can be increasingly problematic for the operation of the high-performance free-electron laser and synchrotron beamlines. As an attempt to remove this type of contamination, an inductively coupled plasma source has been used in conjunction with N2/O2/H2 and N2/H2 feedstock gas plasmas. Results from the chemical surface analysis of the above materials before and after plasma treatment using X-ray photoelectron spectroscopy are reported. It is concluded that a favorable combination of an N2/H2 plasma feedstock gas mixture leads to the best chemical surface preservation of Ni, Rh and Al while removing the carbon contamination. However, this feedstock gas mixture does not remove C contamination as rapidly as, for example, an N2/O2/H2 plasma which induces the surface formation of NiO and NiOOH in Ni and RhOOH in Rh foils. As an applied case, the successful carbon removal from ultrathin Al filters previously used at the FERMI FEL1 using an N2/H2 plasma is demonstrated.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

Sign in / Sign up

Export Citation Format

Share Document