scholarly journals Synthesis of Hydrophilic Poly(butylene succinate-butylene dilinoleate) (PBS-DLS) Copolymers Containing Poly(ethylene glycol) (PEG) of Variable Molecular Weights

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3177
Author(s):  
Moein Zarei ◽  
Miroslawa El Fray
Keyword(s):  
Molecular Weight ◽  
Thermal Properties ◽  
Ethylene Glycol ◽  
Polymeric Materials ◽  
Glycol Succinate ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Butylene Succinate ◽  
Molecular Weights

Polymeric materials have numerous applications from the industrial to medical fields because of their vast controllable properties. In this study, we aimed to synthesize series of poly(butylene succinate-dilinoleic succinate-ethylene glycol succinate) (PBS-DLS-PEG) copolymers, by two-step polycondensation using a heterogeneous catalyst and a two-step process. PEG of different molecular weights, namely, 1000 g/mol and 6000 g/mol, was used in order to study its effect on the surface and thermal properties. The amount of the PBS hard segment in all copolymers was fixed at 70 wt%, while different ratios between the soft segments (DLS and PEG) were applied. The chemical structure of PBS-DLS-PEG was evaluated using Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. Gel permeation chromatography was used to determine the molecular weight and dispersity index. The results of structural analysis indicate the incorporation of PEG in the macrochain. The physical and thermal properties of the newly synthesized copolymers were also evaluated using water contact angle measurements, differential scanning calorimetry and dynamic thermomechanical analysis. It was found that increasing the amount of PEG of a higher molecular weight increased the surface wettability of the new materials while maintaining their thermal properties. Importantly, the two-step melt polycondensation allowed a direct fabrication of a polymeric filament with a well-controlled diameter directly from the reactor. The obtained results clearly show that the use of two-step polycondensation in the melt allows obtaining novel PBS-DLS-PEG copolymers and creates new opportunities for the controlled processing of these hydrophilic and thermally stable copolymers for 3D printing technology, which is increasingly used in medical techniques.

scholarly journals Influence of e-Beam Irradiation on the Physicochemical Properties of Poly(polyol Succinate-co-Butylene Succinate) Ester Elastomers

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3196
Author(s):  
Marta Piątek-Hnat ◽  
Kuba Bomba ◽  
Jakub Pęksiński ◽  
Agnieszka Kozłowska ◽  
Jacek G. Sośnicki ◽  
...  
Keyword(s):  
Succinic Acid ◽  
Thermomechanical Analysis ◽  
Resonance Spectroscopy ◽  
Cross Link ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Butylene Succinate ◽  
Link Density ◽  
Static Tensile ◽  
Cross Link Density

The purpose of this research was synthesis and electron beam modification of novel ester elastomers consisting of sugar alcohol–succinic acid block and butylene glycol–succinic acid block. Four different alditols were used in the synthesis—sorbitol, erythritol, xylitol, and glycerol. The materials were irradiated with doses of 50, 100, and 150 kGy in order to determine which dose is the most beneficial. As expected, irradiation of the materials has led to the cross-link density becoming higher and improvement of the mechanical properties. Additionally, the materials were also sterilized in the process. The great advantage of elastomers described in the paper is the fact that they do not need chemical cross-linking agents or sensitizers in order to undergo radiation modification. The following tests were performed on cross-linked poly(polyol succinate-co-butylene succinate) elastomers: quasi-static tensile test, determination of cross-link density, differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DMTA), wettability (water contact angle), and Fourier transform infrared spectroscopy (FTIR). In order to confirm successful synthesis, prepolymers were analyzed by nuclear magnetic resonance spectroscopy (1H NMR and 13C NMR).

scholarly journals Effect of DMPA and Molecular Weight of Polyethylene Glycol on Water-Soluble Polyurethane

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1915 ◽  
Author(s):  
Eyob Wondu ◽  
Hyun Woo Oh ◽  
Jooheon Kim
Keyword(s):  
Molecular Weight ◽  
Contact Angle ◽  
Polyethylene Glycol ◽  
Photoelectron Spectroscopy ◽  
Water Solubility ◽  
Soft Segment ◽  
Water Soluble ◽  
Size Exclusion ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry

In this study water-soluble polyurethane (WSPU) was synthesized from isophorone diisocyanate (IPDI), and polyethylene glycol (PEG), 2-bis(hydroxymethyl) propionic acid or dimethylolpropionic acid (DMPA), butane-1,4-diol (BD), and triethylamine (TEA) using an acetone process. The water solubility was investigated by solubilizing the polymer in water and measuring the contact angle and the results indicated that water solubility and contact angle tendency were increased as the molecular weight of the soft segment decreased, the amount of emulsifier was increased, and soft segment to hard segment ratio was lower. The contact angle of samples without emulsifier was greater than 87°, while that of with emulsifier was less than 67°, indicating a shift from highly hydrophobic to hydrophilic. The WSPU was also analyzed using Fourier transform infrared spectroscopy (FT-IR) to identify the absorption of functional groups and further checked by X-ray photoelectron spectroscopy (XPS). The molecular weight of WSPU was measured using size-exclusion chromatography (SEC). The structure of the WSPU was confirmed by nuclear magnetic resonance spectroscopy (NMR). The thermal properties of WSPU were analyzed using thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC).

Effects of Molecular Weight of Chitosan on the Biodegradability and Thermal Properties of Polybutylene Succinate/Chitosan Composites

2018 ◽  
Vol 775 ◽  
pp. 26-31
Author(s):  
Sukantika Manatsittipan ◽  
Kamonthip Kuttiyawong ◽  
Kazuo Ito ◽  
Sunan Tiptipakorn
Keyword(s):  
Molecular Weight ◽  
Weight Loss ◽  
Thermal Properties ◽  
Water Absorption ◽  
Melting Temperature ◽  
Microbial Degradation ◽  
Decomposition Temperature ◽  
Molecular Weights ◽  
Significant Difference ◽  
Polybutylene Succinate

In this study, the biodegradability and thermal properties the composites of polybutylene succinate (PBS) and chitosan of different molecular weights (Mn = 104,105, and 106 Da) were prepared at chitosan contents of 0-10 wt%. After 10 days of microbial degradation, the results show that the amount of holes from degradation was increased with either decreasing Mn or increasing chitosan contents. However, the size of holes was increased with increasing Mn and chitosan contents. The results from Differential Scanning Calorimeter (DSC) present that the melting temperature (Tm) of PBS was decreased with increasing chitosan contents. Moreover, there was no significant difference between Tm of the composites with different Mn of chitosan. From the TGA thermograms, the decomposition temperature at 10% weight loss (Td10) was decreased with increasing chitosan contents. Moreover, the water absorption of PBS/chitosan composites was increased with increasing Mn and content of chitosan.

Effect of chain segment length on crystallization behaviors of poly(l-lactide-b-ethylene glycol-b-l-lactide) triblock copolymer

2019 ◽  
Vol 28 (2) ◽  
pp. 77-88
Author(s):  
Yongji Gong ◽  
Weihua Song ◽  
Yifan Wu ◽  
Daohai Zhang ◽  
Yufei Liu ◽  
...  
Keyword(s):  
Growth Rate ◽  
Ethylene Glycol ◽  
Chain Length ◽  
Triblock Copolymer ◽  
Triblock Copolymers ◽  
Segment Length ◽  
Resonance Spectroscopy ◽  
Chain Segment ◽  
Scanning Calorimetry ◽  
Crystallization Behaviors

The poly(l-lactide-b-ethylene glycol-b-l-lactide) (PLLA-PEG-PLLA) triblock copolymers with different chain segment length are fabricated by ring-opening polymerization. The structure, molecular weight, and crystallization behaviors of the triblock copolymers are characterized by Fourier transform infrared, nuclear magnetic resonance spectroscopy, gel permeation in chromatography, X-ray diffraction, differential scanning calorimetry, and polarizing optical microscopy (POM). The results show that the increase of block length is beneficial to improve its crystallization. In addition, the triblock copolymer exhibits a double crystallization phenomenon. The POM results indicate that PEG and PLLA chains of the copolymer crystallize in their respective crystallization temperature regions. The growth rate of the PLLA spherocrystal decreases and the dendritic spherocrystals appear with increasing the PEG chain length when the PLLA chain of the copolymer is isothermal crystallized at 80°C and PLLA chain length is constant. The growth rate of the PEG spherocrystal decreases and the spherocrystal morphology changes little with increasing PLLA chain length when the PEG chain is isothermal crystallized at 25°C and the length of PEG chain remained unchanged.

scholarly journals Analysis of Bio-Based Fatty Esters PCM’s Thermal Properties and Investigation of Trends in Relation to Chemical Structures

2019 ◽  
Vol 9 (2) ◽  
pp. 225 ◽  
Author(s):  
Rebecca Ravotti ◽  
Oliver Fellmann ◽  
Nicolas Lardon ◽  
Ludger Fischer ◽  
Anastasia Stamatiou ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Phase Change ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Arachidic Acid ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Fatty Esters ◽  
Latent Heat Storage ◽  
Chemical Structures

As global energy demand increases while primary sources and fossil fuels’ availability decrease, research has shifted its focus to thermal energy storage systems as alternative technologies able to cover for the mismatch between demand and supply. Among the different phase change materials available, esters possess particularly favorable properties with reported high enthalpies of fusion, low corrosivity, low toxicity, low supercooling, thermal and chemical stability as well as biodegradability and being derived from renewable feedstock. Despite such advantages, little to no data on the thermal behavior of esters is available due to low commercial availability. This study constitutes a continuation of previous works from the authors on the investigation of fatty esters as novel phase change materials. Here, methyl, pentyl and decyl esters of arachidic acid, and pentyl esters of myristic, palmitic, stearic and behenic acid are synthesized through Fischer esterification with high purities and their properties are studied. The chemical structures and purities are confirmed through Attenuated Total Reflectance Infrared Spectroscopy, Gas Chromatography coupled with Mass Spectroscopy and Nuclear Magnetic Resonance Spectroscopy, while the determination of the thermal properties is performed through Differential Scanning Calorimetry and Thermogravimetric Analysis. In conclusion, some correlations between the melting temperatures and the chemical structures are discovered, and the fatty esters are assessed based on their suitability as phase change materials for latent heat storage applications.

Stereocomplex electrospun fibers from high molecular weight of poly(L-lactic acid) and poly(D-lactic acid)

2020 ◽  
Vol 40 (2) ◽  
pp. 136-142 ◽  
Author(s):  
Homa Maleki ◽  
Hossein Barani
Keyword(s):  
Molecular Weight ◽  
Lactic Acid ◽  
Thermal Properties ◽  
High Molecular Weight ◽  
Chemical Properties ◽  
Electrospun Fibers ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
Electrospinning Method

AbstractThe stereocomplex formation is a promising method to improve the properties of poly(lactide) (PLA)-based products due to the strong interaction of the side-by-side arrangement of the molecular chains. Recently, electrospinning method has been applied to prepare PLA stereocomplex, which is more convenient. The objective of the current study is to make stereocomplexed PLA nanofibers using electrospinning method and compare their properties and structures with pure poly(l-lactide) (PLLA) fibers. The stereocomplexed fibers were electrospun from a blend solution of high molecular weight PLLA and poly(d-lactide) (1:1 ratio). The morphology of the obtained electrospun fibers was examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Differential scanning calorimetry was applied to study their thermal properties and crystallinity. Fourier transform infrared spectroscopy (FTIR) test was conducted on the samples to characterize their chemical properties. The SEM and AFM images indicated that smooth uniform fibers with a cylindrical structure were produced. Besides, the FTIR results and thermal properties confirmed that only stereocomplex crystallites formed in the resulting fibers via the electrospinning method.

Comparison of Electron and Infrared Spectroscopy with Thermal Analysis to Study Molecular Weight Effects in PVC-PMMA Blends

1993 ◽  
Vol 47 (10) ◽  
pp. 1636-1642 ◽  
Author(s):  
Cindy A. Burkhardt ◽  
Joseph A. Gardella
Keyword(s):  
Thermal Analysis ◽  
Molecular Weight ◽  
Differential Scanning Calorimetry ◽  
Infrared Spectroscopy ◽  
Lower Molecular Weight ◽  
Scanning Calorimetry ◽  
Molecular Weights ◽  
Solvent Cast ◽  
Pmma Blends

The effects of homopolymer molecular weight on the miscibility of PVC/PMMA solvent cast blends were studied. Two significantly different molecular weights were chosen for each of the homopolymers, and a series of blends was prepared from the four possible homopolymer-homopolymer combinations. Angle-dependent ESCA results suggest that the surfaces of the blends are enriched with PMMA. The extent of this enrichment is dependent on molecular weight, with the most enrichment seen in blends containing the lower-molecular-weight PMMA homopolymer. Differential scanning calorimetry (DSC) results are also presented.

Thermal Properties of Ester-Type Easy Cationic Dyeable Poly(ethylene Terephthalate) (ECDP) Polymers

2010 ◽  
Vol 44-47 ◽  
pp. 2409-2413 ◽  
Author(s):  
Yu Sun ◽  
Guo Zheng ◽  
Hong Xiang Yang ◽  
Yan Jun Liu ◽  
Xiao Ning Li
Keyword(s):  
Thermal Properties ◽  
Diethylene Glycol ◽  
Ethylene Terephthalate ◽  
Glycol Succinate ◽  
Glycol Adipate ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Monomer Content ◽  
Diethylene Glycol Succinate ◽  
Poly Ethylene

This study investigated the thermal properties of ester-type easy cationic dyeable poly(ethylene terephthalate) (ECDP) polymers using differential scanning calorimetry (DSC), therogravimetric analysis (TGA). The mass ratios of 5-sodium sulfo bis(-hydroxyethyl) isophthalate(SIPE) for ECDP polymers were 2.8%, 5.5%, 6.8%, respectively. The fourth monomers were diethylene glycol adipate (DGA), diethylene glycol succinate (DGS) and diethylene glycol subacate (DES) with different contents. The results suggested that the Tg of ester-type ECDP decreased with the increasing the molecule weight of the fourth monomer at fixed SIPE and fourth monomer contents. The Tch of ECDP polymer to be lower than that of the CDP polymer with the same SIPE content. And it decreased as SIPE and fourth monomer contents increased, it also decreased with the increasing of the molecule weight of the fourth monomer given the same SIPE content. The effect of the ester-type soft segments reduced the Tm of ECDP. The thermal stability of ECDP polymer was less than PET and CDP polymers, and it decreased with increasing SIPE content, but increased with the ester-type fourth monomer content increasing.

scholarly journals Methylene-Bridged Tridentate Salicylaldiminato Binuclear Titanium Complexes as Copolymerization Catalysts for the Preparation of LLDPE through [Fe]/[Ti] Tandem Catalysis

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1114 ◽  
Author(s):  
Yani Luo ◽  
Jian Li ◽  
Derong Luo ◽  
Qingliang You ◽  
Zifeng Yang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Temperature ◽  
Gel Permeation Chromatography ◽  
13C Nmr Spectroscopy ◽  
Molar Ratio ◽  
Tandem Catalysis ◽  
Titanium Complexes ◽  
Scanning Calorimetry ◽  
Molecular Weights ◽  
Branching Degree

A novel tandem catalysis system consisted of salicylaldiminato binuclear/mononuclear titanium and 2,6-bis(imino)pyridyl iron complexes was developed to catalyze ethylene in-situ copolymerization. Linear low-density polyethylene (LLDPE) with varying molecular weight and branching degree was successfully prepared with ethylene as the sole monomer feed. The polymerization conditions, including the reaction temperature, the Fi/Ti molar ratio, and the structures of bi- or mononuclear Ti complexes were found to greatly influence the catalytic performances and the properties of obtained polymers. The polymers were characterized by differential scanning calorimetry (DSC), high temperature gel permeation chromatography (GPC) and high temperature 13C NMR spectroscopy, and found to contain ethyl, butyl, as well as some longer branches. The binuclear titanium complexes demonstrated excellent catalytic activity (up to 8.95 × 106 g/molTi·h·atm) and showed a strong positive comonomer effect when combined with the bisiminopyridyl Fe complex. The branching degree can be tuned from 2.53 to 22.89/1000C by changing the reaction conditions or using different copolymerization pre-catalysts. The melting points, crystallinity and molecular weights of the products can also be modified accordingly. The binuclear complex Ti2L1 with methylthio sidearm showed higher capability for comonomer incorporation and produced polymers with higher branching degree and much higher molecular weight compared with the mononuclear analogue.

Sign in / Sign up

Export Citation Format

Share Document