scholarly journals Production of Edible Films Based on Pea Starch with Incorporation of Active Compounds Obtained from the Purple Araçá (Psidium myrtoides)

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3134
Author(s):  
Thainá Stéphanie Martins de Freitas ◽  
Vitor Augusto dos Santos Garcia ◽  
Cristina Tostes Filgueiras ◽  
José Ignacio Velasco ◽  
Farayde Matta Fakhouri
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Amylose Content ◽  
Barrier Properties ◽  
Edible Films ◽  
High Concentration ◽  
Polyethylene Glycol 400 ◽  
Active Compounds ◽  
Visual Appearance ◽  
Pea Starch

The aim of this study was to incorporate the active compounds present in purple araçá (Psidium myrtoides) in pea starch-based films and to verify the influence of different plasticizers (glycerol, sorbitol, and polyethylene glycol 400) on film properties. Films were produced and characterized in relation to visual appearance, active compounds, antimicrobial activity, and mechanical and barrier properties. Pea starch has a high amylose content and a final viscosity of 5371.5 RVU, which contributes to the elaboration of films even without the addition of plasticizers. Purple araçá and pea starch formed films with good water vapor barrier characteristics (0.398 g·mm/m2·h·KPa) and low solubility (33.30%). Among plasticizers, sorbitol promoted a lower permeability to water vapor. The selected formulations, 0%, 20%, and 30% sorbitol, presented a high concentration of phenolic compounds (1194.55, 1115.47, and 1042.10 mg GAE 100 g−1, respectively) and were able to inhibit the growth of Staphylococcus aureus. Therefore, films contained the active compounds of purple araçá and potential to be used as food packaging.

scholarly journals Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 158
Author(s):  
Yao Dou ◽  
Liguang Zhang ◽  
Buning Zhang ◽  
Ming He ◽  
Weimei Shi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Light Transmission ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Vapor Permeability ◽  
Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

scholarly journals Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

2015 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Matheus Luz Alberti ◽  
Sílvio José De Souza ◽  
Heliberto Gonçalves ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Pilot Scale ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

<p>The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed.</p><p>&nbsp;</p><p>DOI: 10.14685/rebrapa.v6i1.208</p><p>&nbsp;</p>

scholarly journals Physical Properties of Edible Films from Pangasius catfish Bone Gelatin-Breadfruits Strach with Different Formulations

2020 ◽  
Vol 3 (2) ◽  
pp. 42-47
Author(s):  
Rian Adhi Santoso ◽  
Yoni Atma
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Moisture Content ◽  
Physical Properties ◽  
Food Packaging ◽  
Edible Films ◽  
Fish Bone ◽  
Edible Film ◽  
Japanese Industrial Standard ◽  
Water Vapor Transmission

Abstract— This research aims to provide edible film made from fish bone gelatin of Pangasius catfish mixed breadfruit starch with different formulations. The study was carried out through three stages including breadfruit starch isolation, edible films fabrication and analysis of physical properties of resulted edible film such as thickness, water vapor transmission, tensile strength and percent of elongation as well as moisture content. Edible films which were formulated from fish bone gelatin of Pangasius catfish by breadfruit starch addition have thickness values ranged of ​​0.084-0.123 mm, 6.08 - 16.77% of moisture content, water vapor transmission of 1.07 - 1.60 g/ m²/hour, tensile strength of 0.245 - 1.186 MPa, and percent of elongation around 70 - 87.14%. The edible films from gelatin of Pangasius catfish bone with breadfruit starch addition have physical characteristic which fulfill the standard requirements issued by Japanese Industrial Standard (JIS) Keywords— edible film; biodegradable materials; fish gelatin;breadfruit starch; food packaging    

scholarly journals An Extensive Review of Natural Polymers Used as Coatings for Postharvest Shelf-Life Extension: Trends and Challenges

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3271
Author(s):  
Maricarmen Iñiguez-Moreno ◽  
Juan Arturo Ragazzo-Sánchez ◽  
Montserrat Calderón-Santoyo
Keyword(s):  
Food Industry ◽  
Food Packaging ◽  
Fruits And Vegetables ◽  
Healthy Lifestyle ◽  
Negative Impact ◽  
Composite Coatings ◽  
Barrier Properties ◽  
Edible Films ◽  
Life Extension ◽  
Natural Polymers

Global demand for minimally processed fruits and vegetables is increasing due to the tendency to acquire a healthy lifestyle. Losses of these foods during the chain supply reach as much as 30%; reducing them represents a challenge for the industry and scientific sectors. The use of edible packaging based on biopolymers is an alternative to mitigate the negative impact of conventional films and coatings on environmental and human health. Moreover, it has been demonstrated that natural coatings added with functional compounds reduce the post-harvest losses of fruits and vegetables without altering their sensorial and nutritive properties. Furthermore, the enhancement of their mechanical, structural, and barrier properties can be achieved through mixing two or more biopolymers to form composite coatings and adding plasticizers and/or cross-linking agents. This review shows the latest updates, tendencies, and challenges in the food industry to develop eco-friendly food packaging from diverse natural sources, added with bioactive compounds, and their effect on perishable foods. Moreover, the methods used in the food industry and the new techniques used to coat foods such as electrospinning and electrospraying are also discussed. Finally, the tendency and challenges in the development of edible films and coatings for fresh foods are reviewed.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

scholarly journals Effect of Different Formulations on Characteristic of Biobased Alginate Edible Films as Biodegradable Packaging

2020 ◽  
Vol 147 ◽  
pp. 03003
Author(s):  
Novia Racmayani ◽  
Amir Husni
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Olive Oil ◽  
Food Packaging ◽  
Raw Materials ◽  
Transmission Rate ◽  
Edible Films ◽  
Edible Film ◽  
Water Vapor Transmission Rate ◽  
Water Vapor Transmission

Edible film can be used for food packaging. The main raw materials for edible film were alginates and plasticizers including glycerol and olive oil. This study aims to determine the characteristics of edible film composed of alginate, glycerol and olive oil. The study was carried out through the manufacture of edible films composed of alginates with various concentrations (2, 3, 4, 5 and 6%, w / v), 10% glycerol and 0.01% olive oil. Characteristics of edible film was observed including thickness, tensile strength, water vapor transmission rate, solubility and elongation. The results showed that the products met the edible film standard of the Japanese Industrial Standard. Concentration of alginate used had significant effect on thickness, tensile strength, solubility and elongation of the edible film. The films with 6% concentration of alginate showed optimum results with thickness 0,227 ± 0,008 mm, tensile strength 3,097 ± 0,384 MPa, elongation 86,682 ± 5,090 %, solubility 8,690 ± 2,892 % and water vapor transmission rate 45,477 ± 6,262 g/m2/24 h.

scholarly journals Pembuatan Edible film Pati Jagung dengan Penambahan Kitosan Sisik Ikan Papuyu (Anabas testudienus)

2019 ◽  
Vol 6 (1) ◽  
pp. 72
Author(s):  
Yuli Ristianingsih ◽  
Maria Natalia
Keyword(s):  
Food Packaging ◽  
Corn Starch ◽  
Amylose Content ◽  
Barrier Properties ◽  
Edible Film ◽  
Physiochemical Properties ◽  
Solubility In Water ◽  
Quality Of Food ◽  
High Amylose

Food packaging most used in order to keep the quality of food could be maintained to consumers. Plastic non-biogradable have weakness such as it is not degradable of environment and it is not safe to health because contain bhispenol. Edible film is solution for this problem because made of chitosan-starch. Starch is natural polymer that safe to use because easy to degradable, edible and economist. Corn starch contain high amylose content is 25%. Addition of chitosan could increase mechanical properties and barrier properties of edible film. The purpose of this research was to find out the effect of addition of chitosan on physiochemical properties edible film. Variation of chitosan used was 0,5; 1; 1,5 and 2 gram. The best result of solubility in water was addition chitosan 2 gram with value 49,74%.

Sign in / Sign up

Export Citation Format

Share Document