scholarly journals Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3103
Author(s):  
Jia-Wun Li ◽  
Yu-Sheng Chen ◽  
Yan-Feng Chen ◽  
Jian-Xun Chen ◽  
Chung-Feng Jeffrey Kuo ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Conversion Efficiency ◽  
Platinum Nanoparticles ◽  
Counter Electrode ◽  
Dye Sensitized Solar Cells ◽  
Photoelectric Conversion Efficiency ◽  
Photoelectric Conversion ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this study, polymer-assisted dispersants are used to stabilize the nanohybrids of platinum nanoparticles (PtNPs)/carbon nanotubes (CNTs) through non-covalent bond forces. These dispersants aim to replace the florine-doped tin oxide (FTO) glass in traditional dye-sensitized solar cells (DSSCs) as counter electrodes. The large specific surface area, high conductivity, and redox potential of PtNPs/CNT nanohybrids are used as the basis to utilize them as the counter electrode material to fabricate a dye-sensitized solar cell. The conductivity results indicate that the resistance of the PtNP/CNT nanohybrid film can be reduced to 7.25 Ω/sq. When carbon nanotubes are mixed with platinum nanoparticles at a weight ratio of 5/1, the photoelectric conversion efficiency of DSSCs can reach 6.28%. When using the FTO-containing substrate as the counter electrode, its conversion efficiency indicates that the micro-/nano-hybrid material formed by PtNPs/CNTs also exhibits an excellent photoelectric conversion efficiency (8.45%) on the traditional FTO substrate. Further, a large-area dye-sensitive cell is fabricated, showing that an 8 cm × 8 cm cell has a conversion efficiency of 7.95%. Therefore, the traditional Pt counter electrode can be replaced with a PtNP/CNT nanohybrid film, which both provides dye-sensitive cells with a high photoelectric conversion efficiency and reduces costs.

Carbon nanotubes in situ embedded with NiS nanocrystals outperform Pt in dye-sensitized solar cells: interface improved activity

2019 ◽  
Vol 7 (17) ◽  
pp. 10405-10411 ◽  
Author(s):  
Xiuwen Wang ◽  
Ying Xie ◽  
Yanqing Jiao ◽  
Kai Pan ◽  
Buhe Bateer ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Solar Cells ◽  
Conversion Efficiency ◽  
Active Site ◽  
Dye Sensitized Solar Cells ◽  
Photoelectric Conversion Efficiency ◽  
Photoelectric Conversion ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

An active-site-enriched NiS/CNT composite with a unique interface was synthesized and exhibited a surprising photoelectric conversion efficiency of 10.82%.

The Effects of Sputtering Pressure on the Properties of Carbon Counter Electrodes for Dye-Sensitized Solar Cells

2012 ◽  
Vol 430-432 ◽  
pp. 631-635
Author(s):  
Shu Hong Liu ◽  
Gui Shan Liu ◽  
Xiao Yue Shen ◽  
Zhi Qiang Hu
Keyword(s):  
Solar Cells ◽  
Sheet Resistance ◽  
Carbon Film ◽  
Dye Sensitized Solar Cells ◽  
Photoelectric Conversion Efficiency ◽  
Photoelectric Conversion ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Sputtering Pressure ◽  
Sensitized Solar Cells

The carbon counter electrodes for Dye-sensitized solar cells (DSSCs) were deposited on FTO glass using graphite target by bipolar pulse magnetron sputtering. The effects of sputtering pressure on the structures and properties for carbon films were investigated. The carbon bond structure was analyzed by Raman spectra. The sheet resistance of carbon film was detected by four-probe tester. The transmittance was tested by UV-visible spectrum. The performance of DSSCs was tested by solar simulator after the cells assembled. The results indicated that the ratio of ID/IG reduced, the degree of graphitization decreased, sheet resistance raised, transmittance increased and photoelectric conversion efficiency reduced with the increasing of sputtering pressure.

Dye-Sensitized Solar Cells Based on Three-Dimensional Web-Like Structure Anodes

2012 ◽  
Vol 629 ◽  
pp. 332-338 ◽  
Author(s):  
Zhi Hua Tian ◽  
Jian Xi Yao ◽  
Mi Na Guli
Keyword(s):  
Solar Cells ◽  
Conversion Efficiency ◽  
Dye Sensitized Solar Cells ◽  
Three Dimensional ◽  
Precursor Solution ◽  
Photoelectric Conversion Efficiency ◽  
Tio2 Films ◽  
Photoelectric Conversion ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

TiO2 films with three-dimensional web-like structure have been prepared by the photo polymerization-induced phase separation method (PIPS). Scanning electron microscopy and X-ray diffraction were used to characterize the as-prepared TiO2 films. The results showed that the film texture could be tuned by changing the composition of the precursor solution. The TiO2 film with web-like structure exhibited high photocatalytic activity for the degradation of methylene blue (MB) dye. The as-prepared films were used as the photo-anodes in dye-sensitized solar cells (DSCs). The photoelectric conversion efficiency of the DSCs was significantly enhanced by changing the POGTA/TTB in the precursor solution. Because of the increased dye adsorption active sites and efficient electron transport in the TiO2 anode film, a photoelectric conversion efficiency of 3.015% was obtained.

Improved Efficiency of Dye Sensitized Solar Cells Using Aligned Carbon Nanotubes

2009 ◽  
Author(s):  
Robert A. Sayer ◽  
Stephen L. Hodson ◽  
Timothy S. Fisher
Keyword(s):  
Carbon Nanotubes ◽  
Solar Cells ◽  
Counter Electrode ◽  
Microwave Plasma ◽  
Dye Sensitized Solar Cells ◽  
Planar Geometry ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Cnt Arrays ◽  
Sensitized Solar Cells

Dye sensitized solar cells (DSSCs) offer many advantages in comparison to their Si-based counterparts, including lower cost of raw materials, faster manufacturing time, and the ability to be integrated with flexible substrates. Although many advances have been made in DSSC fabrication over recent years, their efficiency remains lower than commercially available Si photovoltaic cells. Here we report improved efficiency of TiO2/anthocyanin dye solar cell using aligned arrays of carbon nanotubes (CNTs) as a counter electrode. Dense vertically oriented CNT arrays are grown directly on the counter electrode using microwave plasma chemical vapor deposition and a tri-layer (Ti/Al/Fe) catalyst. The resulting arrays are 30 micrometers in height and have a number density of approximately five hundred million per square millimeter. By directly growing the CNTs on the counter electrode substrate, electrical interface conductance is enhanced. The performance of both as-grown and N-doped (using a nitrogen plasma) CNT arrays is reported. The fabricated DSSCs are tested under AM1.5 light. Increased short circuit current is observed in comparison to graphite and Pt counter electrodes. We attribute this improvement to the large surface area created by the 3D structure of the arrays in comparison to the planar geometry of the graphite and Pt electrodes as well as the excellent electrical properties of the CNTs.

Indirect Preparation of Titanium Dioxide Oxidation Plating Layer as Photoelectrode Used in Dye-Sensitized Solar Cells

2014 ◽  
Vol 953-954 ◽  
pp. 1095-1098 ◽  
Author(s):  
Jun Zhang ◽  
Ya Han Wu ◽  
Fang Xue ◽  
Meng Jun Yuan ◽  
Yan Huo ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Solar Cells ◽  
Conversion Efficiency ◽  
Dye Sensitized Solar Cells ◽  
Great Influence ◽  
Photoelectric Conversion Efficiency ◽  
Titanium Coating ◽  
Photoelectric Conversion ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The structural morphology, arrangement of the nanocrystalline particles, porosity factor, surface state, crystalline phase and specific area of photoelectrode film have great influence on photoelectric performance of dye sensitized solar cells (DSSCs). At present, using TiO2 as the photoelectrode in the DSSC material has achieved very good photoelectric conversion efficiency. In this paper, the plating method is adopted to directly deposited the titanium coating on the conductive glass substrate, oxidizing the surface of titanium film, so that it is generated on the surface of titanium dioxide oxidation layer. Making it as the DSSC photoelectrode, obtained relative high photoelectric conversion efficiency.

Two carboxyethyltin functionalized polyoxometalates for assembly on carbon nanotubes as efficient counter electrode materials in dye-sensitized solar cells

2014 ◽  
Vol 50 (93) ◽  
pp. 14678-14681 ◽  
Author(s):  
Xiao-Jing Sang ◽  
Jian-Sheng Li ◽  
Lan-Cui Zhang ◽  
Zai-Ming Zhu ◽  
Wei-Lin Chen ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrocatalytic Activity ◽  
Counter Electrode ◽  
Electrode Materials ◽  
Dye Sensitized Solar Cells ◽  
Single Walled Carbon Nanotubes ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Walled Carbon Nanotubes ◽  
Sensitized Solar Cells

Two new POM-carboxyethyltin derivatives increased the electrocatalytic activity of single-walled carbon nanotubes toward triiodide reduction as counter electrodes in DSSCs.

Effects of triphenyl phosphate as an inexpensive additive on the photovoltaic performance of dye-sensitized nanocrystalline TiO2 solar cells

RSC Advances ◽  
2015 ◽  
Vol 5 (62) ◽  
pp. 50483-50493 ◽  
Author(s):  
Malihe Afrooz ◽  
Hossein Dehghani
Keyword(s):  
Solar Cells ◽  
Conversion Efficiency ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Photoelectric Conversion Efficiency ◽  
Triphenyl Phosphate ◽  
Photoelectric Conversion ◽  
Nanocrystalline Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this study, triphenyl phosphate (TPP) is applied as an effective and inexpensive additive in the dye sensitized solar cells (DSSCs) and an increase in the photoelectric conversion efficiency is obtained of almost 24%.

scholarly journals Triazoloisoquinoline-Based/Ruthenium-Hybrid Sensitizer for Efficient Dye-Sensitized Solar Cells

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Che-Lung Lee ◽  
Wen-Hsi Lee ◽  
Cheng-Hsien Yang
Keyword(s):  
Solar Cells ◽  
Conversion Efficiency ◽  
Ruthenium Complex ◽  
Molecular Layer ◽  
Dye Sensitized Solar Cells ◽  
Visible Spectrum ◽  
Photoelectric Conversion Efficiency ◽  
Photoelectric Conversion ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Triazoloisoquinoline-based organic dyestuffs were synthesized and used in the fabrication of dye-sensitized solar cells (DSSCs). After cosensitization with ruthenium complex, the triazoloisoquinoline-based organic dyestuffs overcame the deficiency of ruthenium dyestuff absorption in the blue part of the visible spectrum. This method also fills the blanks of ruthenium dyestuff sensitized TiO2film and forms a compact insulating molecular layer due to the nature of small molecular organic dyestuffs. The incident photon-to-electron conversion efficiency of N719 at shorter wavelength regions is 49%. After addition of a triazoloisoquinoline-based dyestuff for co-sensitization, the IPCE at 350–500 nm increased significantly. This can be attributed to the increased photocurrent of the cells, which improves the dye-sensitized photoelectric conversion efficiency from 6.23% to 7.84%, and the overall conversion efficiency increased by about 26%. As a consequence, this low molecular weight organic dyestuff is a promising candidate as coadsorbent and cosensitizer for highly efficient dye-sensitized solar cells.

Sign in / Sign up

Export Citation Format

Share Document