scholarly journals Silk-Cellulose Acetate Biocomposite Materials Regenerated from Ionic Liquid

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2911
Author(s):  
Ashley Rivera-Galletti ◽  
Christopher R. Gough ◽  
Farhan Kaleem ◽  
Michael Burch ◽  
Chris Ratcliffe ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Cellulose Acetate ◽  
Biomedical Applications ◽  
Strong Interactions ◽  
The Novel ◽  
Scanning Calorimetry ◽  
Pure Cellulose ◽  
Secondary Structure Analysis ◽  
Bombyx Mori Silk ◽  
Protein Molecular Weight

The novel use of ionic liquid as a solvent for biodegradable and natural organic biomaterials has increasingly sparked interest in the biomedical field. As compared to more volatile traditional solvents that rapidly degrade the protein molecular weight, the capability of polysaccharides and proteins to dissolve seamlessly in ionic liquid and form fine and tunable biomaterials after regeneration is the key interest of this study. Here, a blended system consisting of Bombyx Mori silk fibroin protein and a cellulose derivative, cellulose acetate (CA), in the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc) was regenerated and underwent characterization to understand the structure and physical properties of the films. The change in the morphology of the biocomposites (by scanning electron microscope, SEM) and their secondary structure analysis (by Fourier-transform infrared spectroscopy, FTIR) showed that the samples underwent a wavering conformational change on a microscopic level, resulting in strong interactions and changes in their crystalline structures such as the CA crystalline and silk beta-pleated sheets once the different ratios were applied. Differential scanning calorimetry (DSC) results demonstrated that strong molecular interactions were generated between CA and silk chains, providing the blended films lower glass transitions than those of the pure silk or cellulose acetate. All films that were blended had higher thermal stability than the pure cellulose acetate sample but presented gradual changes amongst the changing of ratios, as demonstrated by thermogravimetric analysis (TGA). This study provides the basis for the comprehension of the protein-polysaccharide composites for various biomedical applications.

scholarly journals The Impact of Composition and Morphology on Ionic Conductivity of Silk/Cellulose Bio-Composites Fabricated from Ionic Liquid and Varying Percentages of Coagulation Agents

2020 ◽  
Vol 21 (13) ◽  
pp. 4695 ◽  
Author(s):  
Bailey Blessing ◽  
Cory Trout ◽  
Abneris Morales ◽  
Karleena Rybacki ◽  
Stacy A. Love ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Conductivity ◽  
Ionic Conduction ◽  
Hydrophobic Interactions ◽  
Gravimetric Analysis ◽  
Dielectric Relaxation Spectroscopy ◽  
Scanning Calorimetry ◽  
Electrolyte Membranes ◽  
Bombyx Mori Silk ◽  
The Impact

Blended biocomposites created from the electrostatic and hydrophobic interactions between polysaccharides and structural proteins exhibit useful and unique properties. However, engineering these biopolymers into applicable forms is challenging due to the coupling of the material’s physicochemical properties to its morphology, and the undertaking that comes with controlling this. In this particular study, numerous properties of the Bombyx mori silk and microcrystalline cellulose biocomposites blended using ionic liquid and regenerated with various coagulation agents were investigated. Specifically, the relationship between the composition of polysaccharide-protein bio-electrolyte membranes and the resulting morphology and ionic conductivity is explored using numerous characterization techniques, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray scattering, atomic force microscopy (AFM) based nanoindentation, and dielectric relaxation spectroscopy (DRS). The results revealed that when silk is the dominating component in the biocomposite, the ionic conductivity is higher, which also correlates with higher β-sheet content. However, when cellulose becomes the dominating component in the biocomposite, this relationship is not observed; instead, cellulose semicrystallinity and mechanical properties dominate the ionic conduction.

scholarly journals Effect of tungsten disulfide nanotubes on crystallization of polylactide under uniaxial deformation and annealing

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Fausta Loffredo ◽  
Loredana Tammaro ◽  
Tiziana Di Luccio ◽  
Carmela Borriello ◽  
Fulvia Villani ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Structural Evolution ◽  
Tungsten Disulfide ◽  
Fine Tuning ◽  
Nanocomposite Films ◽  
Uniaxial Deformation ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering

AbstractTungsten disulfide (WS2) nanotubes (NTs) are examined here as a filler for polylactide (PLA) for their ability to accelerate PLA crystallization and for their promising biocompatibility in relevant to biomedical applications of PLA-WS2 nanocomposites. In this work, we have studied the structural and thermal properties of PLA-WS2 nanocomposite films varying the concentration of WS2 NTs from 0 (neat PLA) to 0.6 wt%. The films were uniaxially drawn at 90 °C and annealed at the same temperature for 3 and 10 min. Using wide angle x-ray scattering, Raman spectroscopy and differential scanning calorimetry, we probed the effects of WS2 NT addition on the structure of the PLA films at various stages of processing (unstretched, stretching, annealing). We found that 0.6 wt% of WS2 induces the same level of crystallinity in as stretched PLA-WS2 as annealing in neat PLA for 10 min. These data provide useful insights into the role of WS2 NTs on the structural evolution of PLA-WS2 composites under uniaxial deformation, and extend their applicability to situations where fine tuning of PLA crystallinity is desirable.

scholarly journals Manufacture of all-wood sawdust-based particle board using ionic liquid-facilitated fusion process

2021 ◽  
Vol 55 (2) ◽  
pp. 331-349
Author(s):  
Hannes Orelma ◽  
Atsushi Tanaka ◽  
Maija Vuoriluoto ◽  
Alexey Khakalo ◽  
Antti Korpela
Keyword(s):  
Tensile Strength ◽  
Ionic Liquid ◽  
Raw Materials ◽  
Weight Ratio ◽  
Fusion Process ◽  
The Novel ◽  
Particle Board ◽  
Microscopy Technique ◽  
Twin Screw ◽  
Fusion Approach

AbstractTraditional particle board can generate harmful indoor air emissions due to the volatile resin-based compounds present. This study investigated the preparation of sawdust particle board using the novel ionic liquid based fusion approach with [EMIM]OAc. The dissolution parameters were investigated using the thermal optical microscopy technique. The particle board sheets were prepared by hot pressing sawdust in the presence of ionic liquid (IL) ([EMIM]OAc) and subsequently purifying the fusion sawdust matrix from the IL with methanol. The fusion process of the sawdust particles was analysed with SEM and mechanical testing. The raw materials and the produced materials were investigated with elemental analysis, FTIR, and 13C-SS-NMR. IL fusion of the sawdust required a temperature above 150 °C, similar to the glass transition temperature (tg) of lignin. At lower temperatures, strong particle fusion was not obtained. It was observed that the sawdust/IL weight ratio was an important parameter of the fusion process, and a 1:3 weight ratio resulted in the strongest particle boards with a tensile strength of up to 10 MPa, similar to commercial particle boards. The particle fusion process was also studied with a twin-screw extruder. The extrusion enhanced the fusion of the sawdust particles by increasing dissolution of the sawdust particles, which was subsequently seen in elevated tensile strength (20 MPa). The study provides a practical view of how sawdust-based particle board can be manufactured using ionic liquid-based fusion.

scholarly journals Oxygen Permeability of Silk Fibroin Hydrogels and Their Use as Materials for Contact Lenses: A Purposeful Analysis

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Traian V. Chirila
Keyword(s):  
Tissue Engineering ◽  
Bombyx Mori ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Oxygen Permeability ◽  
Contact Lenses ◽  
The Past ◽  
Fibrous Protein ◽  
Silk Moth ◽  
Bombyx Mori Silk

Fibroin is a fibrous protein that can be conveniently isolated from the silk cocoons produced by the larvae of Bombyx mori silk moth. In its form as a hydrogel, Bombyx mori silk fibroin (BMSF) has been employed in a variety of biomedical applications. When used as substrates for biomaterial-cells constructs in tissue engineering, the oxygen transport characteristics of the BMSF membranes have proved so far to be adequate. However, over the past three decades the BMSF hydrogels have been proposed episodically as materials for the manufacture of contact lenses, an application that depends on substantially elevated oxygen permeability. This review will show that the literature published on the oxygen permeability of BMSF is both limited and controversial. Additionally, there is no evidence that contact lenses made from BMSF have ever reached commercialization. The existing literature is discussed critically, leading to the conclusion that BMSF hydrogels are unsuitable as materials for contact lenses, while also attempting to explain the scarcity of data regarding the oxygen permeability of BMSF. To the author’s knowledge, this review covers all publications related to the topic.

scholarly journals Modulation of Crystallinity through Radiofrequency Electromagnetic Fields in PLLA/Magnetic Nanoparticles Composites: A Proof of Concept

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4300
Author(s):  
Marta Multigner ◽  
Irene Morales ◽  
Marta Muñoz ◽  
Victoria Bonache ◽  
Fernando Giacomone ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnetic Nanoparticles ◽  
Electromagnetic Fields ◽  
Biomedical Applications ◽  
Infrared Camera ◽  
Proof Of Concept ◽  
Scanning Calorimetry ◽  
Radiofrequency Electromagnetic Fields ◽  
Degradation Properties ◽  
Heat Released

To modulate the properties of degradable implants from outside of the human body represents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nanoparticles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f·H < 5·× 109 Am−1·s−1. Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were analyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment.

Numerical analysis of non-aligned inputs M-type micromixers with different shaped obstacles for biomedical applications

2021 ◽  
pp. 095440892110516
Author(s):  
Muhammad Irfan ◽  
Imran Shah ◽  
Usama M Niazi ◽  
Muhsin Ali ◽  
Sadaqat Ali ◽  
...  
Keyword(s):  
Structural Design ◽  
Biomedical Applications ◽  
Structural Changes ◽  
Nanoparticle Synthesis ◽  
Fluid Mixing ◽  
The Novel ◽  
Flow Conditions ◽  
Mixing Index ◽  
Mixing Performance ◽  
Passive Micromixer

Fluid mixing in lab-on-a-chip devices at laminar flow conditions result in a low mixing index. The reason is dominant diffusion over the convection process. The mixing index can be improved by certain changes in the micromixer structural design like introducing obstacles in the path of fluid flow. These obstacles will make dominant the advection process over the diffusion process. The main contribution of this work is based on proposing the novel hybrid type micromixer design for enhancing the mixing quality. Three non-aligned M-type and non-aligned M-type with obstacles passive type micromixers are analyzed by COMSOL5.5. These designs are hybrid types because different structural changes are combined in a single design for mixing improvement. First of all the straight non-aligned inlets, M-type passive micromixer (SMTM) is analyzed. It is observed that mixing performance is improved because of M-shaped mixing units and non-aligned inlets. This improvement is deemed to be not enough so different shaped obstacles are introduced in the micromixer design. These designs based on obstacles are named horizontal rectangular M-type micromixer, square M-type micromixer, and vertical rectangular M-type micromixer. The mixing index for SMTM, square M-type micromixer, horizontal rectangular M-type micromixer, and vertical rectangular M-type micromixer at Reynolds number Re = 60 is respectively given by 71.1%, 83.21%, 84.45%, and 89.99%. The mixing index of vertical rectangular M-type micromixer was 59.34% − 87.65% for Re = 0.5–100. Vertical rectangular M-type micromixer is concluded with the better-mixing capability design among the proposed ones. Based on these simulation results, the vertical rectangular M-type micromixer design can be utilized for mixing purposes in biomedical applications like nanoparticle synthesis and biomedical sample preparation for drug delivery.

The effect on the fatigue strength of bone cement of adding sodium fluoride

2001 ◽  
Vol 215 (2) ◽  
pp. 251-253 ◽  
Author(s):  
C Minari ◽  
M Baleanil ◽  
L Cristofolini ◽  
F Baruffaldi
Keyword(s):  
Fatigue Strength ◽  
Bone Cement ◽  
Sodium Fluoride ◽  
Biomedical Applications ◽  
Cement Mantle ◽  
Fatigue Tests ◽  
Fatigue Performance ◽  
Bone Cements ◽  
The Novel ◽  
Pmma Bone Cement

New bone cements that include several additives are currently being investigated and tested. One such additive is sodium fluoride (NaF), which promotes bone formation, facilitating implant integration and success. The influence of NaF on the fatigue performance of the cement as used in biomedical applications was tested in this paper. In fact fatigue failure of the cement mantle is a major factor limiting the longevity of a cemented implant. An experimental bone cement with added NaF (12wt%) was investigated. The fatigue strength of the novel bone cement was evaluated in comparison with the cement without additives; fatigue tests were conducted according to current standards. The load levels were arranged based on a validated, statistically based optimization algorithm. The curve of stress against number of load cycles and the endurance limit were obtained and compared for both formulations. The results showed that the addition of NaF (12 wt %) to polymethylmethacrylate (PMMA) bone cement does not affect the fatigue resistance of the material. Sodium fluoride can safely be added to the bone cement without altering the fatigue performance of the PMMA bone cement.

scholarly journals Development and Characterization of pH-Dependent Cellulose Acetate Phthalate Nanofibers by Electrospinning Technique

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3202
Author(s):  
Gustavo Vidal-Romero ◽  
Virginia Rocha-Pérez ◽  
María L. Zambrano-Zaragoza ◽  
Alicia Del Real ◽  
Lizbeth Martínez-Acevedo ◽  
...  
Keyword(s):  
Cellulose Acetate ◽  
Polymer Concentration ◽  
Process Efficiency ◽  
Fickian Diffusion ◽  
Solvent Mixtures ◽  
Cellulose Acetate Phthalate ◽  
Scanning Calorimetry ◽  
Electrospinning Technique ◽  
Ph Dependent ◽  
Release Profiles

The aim of this work was to obtain pH-dependent nanofibers with an electrospinning technique as a novel controlled release system for the treatment of periodontal disease (PD). Cellulose acetate phthalate (CAP) was selected as a pH-sensitive and antimicrobial polymer. The NF was optimized according to polymeric dispersion variables, polymer, and drug concentration, and characterized considering morphology, diameter, entrapment efficiency (EE), process efficiency (PE), thermal properties, and release profiles. Two solvent mixtures were tested, and CHX-CAP-NF prepared with acetone/ethanol at 12% w/v of the polymer showed a diameter size of 934 nm, a uniform morphology with 42% of EE, and 55% of PE. Meanwhile, CHX-CAP-NF prepared with acetone/methanol at 11% w/v of polymer had a diameter of 257 nm, discontinuous nanofiber morphology with 32% of EE, and 40% of PE. EE and PE were dependent on the polymer concentration and the drug used in the formulation. Studies of differential scanning calorimetry (DSC) showed that the drug was dispersed in the NF matrix. The release profiles of CHX from CHX-CAP-NF followed Fickian diffusion dependent on time (t0.43−0.45), suggesting a diffusion–erosion process and a matrix behavior. The NF developed could be employed as a novel drug delivery system in PD.

scholarly journals The Influence of the Nature of Redox-Active Moieties on the Properties of Redox-Active Ionic Liquids and on Their Use as Electrolyte for Supercapacitors

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6344
Author(s):  
Philipp S. Borchers ◽  
Patrick Gerlach ◽  
Yihan Liu ◽  
Martin D. Hager ◽  
Andrea Balducci ◽  
...  
Keyword(s):  
Phase Transition ◽  
Differential Scanning Calorimetry ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Binary Mixtures ◽  
Thermal Characteristics ◽  
The Other ◽  
Scanning Calorimetry ◽  
Imidazolium Ionic Liquids ◽  
Redox Active

In this work, two new redox-active ionic liquids, one based on 2,2,6,6-tetramethylpiperidine-N-oxide and the other based on 4,4′-bipyridine, are synthesized and characterized. A ferrocene-based redox-active ionic liquid is used for referencing the results. All ionic liquids are formed via salt-metathesis from halogenate to bis(trifluoromethylsulfonyl)imide. Their fundamental thermal characteristics are assessed with differential scanning calorimetry. While the imidazolium ionic liquids show no melting point, the phase transition is well observable for the viologen-based ionic liquid. The properties of the neat redox-active ionic liquids and of binary mixtures containing these ionic liquids (0.1 m) and 1-butyl-1-methyl pyrrolidinium-bis(trifluoromethylsulfonyl)imide have been investigated. Finally, the use of these binary mixtures in combination with activated carbon-based electrodes has been considered in view of the use of these redox-active electrolytes in supercapacitors.

scholarly journals Properties and applications of cellulose regenerated from cellulose/imidazolium-based ionic liquid/co-solvent solutions: A short review

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 869-880
Author(s):  
Ahmad Adlie Shamsuri ◽  
Khalina Abdan ◽  
Siti Nurul Ain Md. Jamil
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Cellulose Acetate ◽  
Processing Time ◽  
Short Review ◽  
Organic Liquids ◽  
Regenerated Cellulose ◽  
Solvent Mixtures ◽  
Different Types ◽  
Novel Applications

Abstract An improvement of ecological conscience currently has increased the consciousness of researchers in reducing the processing time and cost of solvent for the dissolution of cellulose. Latterly, ionic liquids have been employed to process cellulose as they are recyclable and nonvolatile. Besides that, biopolymers such as chitosan, chitin, starch, protein, and cellulose acetate can also be processed by using ionic liquids for diverse applications. In this short review, examples of imidazolium-based ionic liquids that are commonly used for the dissolution of cellulose are implied. Furthermore, examples of organic liquids that are utilized as co-solvents for ionic liquids were revealed. In addition, examples of imidazolium-based ionic liquid/co-solvent mixtures utilized in the dissolution of cellulose and other biopolymers are also demonstrated. The properties and applications of cellulose and its blends regenerated from different types of cellulose/imidazolium-based ionic liquid/co-solvent solutions are also shortly reviewed. The information acquired from this review gives a better understanding of the changes in the properties of regenerated cellulose and regenerated cellulose blends. In addition, this short review serves as a model basis for the creation of novel applications of regenerated cellulose and regenerated cellulose blends by utilizing imidazolium-based ionic liquid/co-solvent mixtures.

Sign in / Sign up

Export Citation Format

Share Document