scholarly journals Application of Chitosan/Alginate Nanocomposite Incorporated with Phycosynthesized Iron Nanoparticles for Efficient Remediation of Chromium

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2481
Author(s):  
Fahad M. Almutairi ◽  
Haddad A. El Rabey ◽  
Adel I. Alalawy ◽  
Alzahraa A. M. Salama ◽  
Ahmed A. Tayel ◽  
...  
Keyword(s):  
Contact Time ◽  
Iron Nanoparticles ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Brown Seaweed ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Mean Diameter ◽  
Adsorbent Dose

Biopolymers and nanomaterials are ideal candidates for environmental remediation and heavy metal removal. As hexavalent chromium (Cr6+) is a hazardous toxic pollutant of water, this study innovatively aimed to synthesize nanopolymer composites and load them with phycosynthesized Fe nanoparticles for the full Cr6+ removal from aqueous solutions. The extraction of chitosan (Cht) from prawn shells and alginate (Alg) from brown seaweed (Sargassum linifolium) was achieved with standard characteristics. The tow biopolymers were combined and cross-linked (via microemulsion protocol) to generate nanoparticles from their composites (Cht/Alg NPs), which had a mean diameter of 311.2 nm and were negatively charged (−23.2 mV). The phycosynthesis of iron nanoparticles (Fe-NPs) was additionally attained using S. linifolium extract (SE), and the Fe-NPs had semispherical shapes with a 21.4 nm mean diameter. The conjugation of Cht/Alg NPs with SE-phycosynthesized Fe-NPs resulted in homogenous distribution and stabilization of metal NPs within the polymer nanocomposites. Both nanocomposites exhibited high efficiency as adsorbents for Cr6+ at diverse conditions (e.g., pH, adsorbent dose, contact time and initial ion concentration) using batch adsorption evaluation; the most effectual conditions for adsorption were a pH value of 5.0, adsorbent dose of 4 g/L, contact time of 210 min and initial Cr6+ concentration of 75 ppm. These factors could result in full removal of Cr6+ from batch experiments. The composited nanopolymers (Cht/Alg NPs) incorporated with SE-phycosynthesized Fe-NPs are strongly recommended for complete removal of Cr6+ from aqueous environments.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

scholarly journals Comparison of the experimental results with the Langmuir and Freundlich models for copper removal on limestone adsorbent

2019 ◽  
Vol 9 (8) ◽  
Author(s):  
Thair Sharif Khayyun ◽  
Ayad Hameed Mseer
Keyword(s):  
Heavy Metal ◽  
Metal Ion ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Equilibrium Concentration ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Batch Adsorption ◽  
Empirical Constant

Abstract The purpose of this study was to investigate the possibility of the limestone as an adsorbed media and low-cost adsorbent. Batch adsorption studies were conducted to examine the effects of the parameters such as initial metal ion concentration C0, particle size of limestone DL, adsorbent dosage and equilibrium concentration of heavy metal Ce on the removal of the heavy metal (Cu) from synthetic water solution by limestone. The removal efficiency is increased with the increase in the volume of limestone (influenced by the media specific area). It has been noted that the limestone with diameter of 3.75 is the most effective size for removal of copper from synthetic solution. The adsorption data were analyzed by the Langmuir and Freundlich isotherm model. The average values of the empirical constant and adsorption constant (saturation coefficient) for the Langmuir equation were a = 0.022 mg/g and b = 1.46 l/mg, respectively. The average values of the Freundlich adsorption constant and empirical coefficient were Kf = 0.010 mg/g and n = 1.58 l/mg, respectively. It was observed that the Freundlich isotherm model described the adsorption process with high coefficient of determination R2, better than the Langmuir isotherm model and for low initial concentration of heavy metal. Also, when the values of amount of heavy metal removal from solution are predicted by the Freundlich isotherm model, it showed best fits the batch study. It is clear from the results that heavy metal (Cu) removal with the limestone adsorbent appears to be technically feasible and with high efficiency.

Adsorption of Copper (II) from Aqueous Solution Using Tea (Camellia sinensis) Leaf Waste

2020 ◽  
Vol 997 ◽  
pp. 113-120
Author(s):  
Hafizah Binti Naihi
Keyword(s):  
Heavy Metal ◽  
Contact Time ◽  
Metal Removal ◽  
Binding Capacity ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Batch Adsorption ◽  
Biological Origin ◽  
Tea Waste

The extensive use of heavy metals such as copper in various industries has discharged a large amount of the metals into the environment which is toxic at higher concentrations. The use of low-cost agricultural waste of biological origin such as tea waste may be an economic solution to this problem. Tea waste is among the potential material to be developed as an adsorbent for heavy metal ions. Tea waste contains cellulose and lignin which have been reported having an excellent metal binding capacity. This study aims to use tea waste for the removal of Cu2+ ions. The effect of variation in different parameters like initial concentration of Cu2+ ions in solution, adsorbent dosage and contact time were investigated using batch adsorption method. The adsorbent, tea waste was characterized using a compound microscope and FTIR spectroscopy. Experimental results showed that the maximum removal of the copper ion by tea waste at optimum condition (pH 7, 60 min. contact time, 0.8 g adsorbent dose and 0.7 M concentration) is 74%. The adsorbent prepared from tea waste is efficient and it can be conveniently employed as a low-cost alternative in the treatment of wastewater for heavy metal removal.

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

Application of Immobilized Fungi Phanerochaete chrysosporium in Removal of Heavy-Metals from Wastewater

2013 ◽  
Vol 779-780 ◽  
pp. 1674-1677 ◽  
Author(s):  
Dan Lian Huang ◽  
Guang Ming Zeng ◽  
Piao Xu ◽  
Cui Lai ◽  
Mei Hua Zhao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Phanerochaete Chrysosporium ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Of Heavy Metals ◽  
Iron Oxide Magnetic Nanoparticles ◽  
Ca Alginate

Immobilized microbe technologies are expected to be effectively used in wastewater treatment. Removal of heavy-metals from wastewater by immobilized Phanerochaete chrysosporium (Pc) with Ca-alginate and iron oxide magnetic nanoparticles (MNPs) was studied. The results showed that a biosorbent as Pc immobilized by Ca-alginate and iron oxide magnetic nanoparticles was successfully developed. And the iron oxide magnetic nanoparticles played an important role in the increase of biosorption capacity of Pc. Energy dispersive spectrometer (EDS) analysis confirmed that metal ions adsorbed to the surface of the biosorbents were partly transmitted to the interior of biosorbents, mainly embedded with iron oxide nanoparticles and Ca-alginate. Moreover, it was found that MNPs-Ca-alginate immobilized Pc showed a good affinity to various heavy metals, such as Pb(II), Zn(II), Cd(II) or Mg(II) and so on. The results proved the high efficiency of the biosorbents for heavy-metal removal and its potential application in the treatment of metal-containing wastewater.

scholarly journals Cadmium Removal by using Pumice Modified with Iron Nanoparticles from Aqueous Solutions

2016 ◽  
Vol 18 (2) ◽  
pp. 426-436 ◽  
Keyword(s):  
Contact Time ◽  
Iron Nanoparticles ◽  
Cadmium Concentration ◽  
Synthetic Wastewater ◽  
Isotherm Models ◽  
Cadmium Removal ◽  
Pumice Stone ◽  
Practical Applications ◽  
Equilibrium Data ◽  
Adsorbent Dose

<p>In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l<sup>-1</sup>) and adsorbent dose (2-10 g l<sup>-1</sup>) were studied. The pumice stone used in this research was, first, crashed and then sieved with 20 mesh standard sieves (0.85 mm); finally, it was coated with INPs. An atomic absorption spectrophotometer was used to measure cadmium contents and isotherm models and adsorption kinetics were studied. The results showed the adsorption process of cadmium reached equilibrium at contact time of 80 min. With increasing pH solution, the efficiency enhanced which peaked at pH 7-8. Cadmium concentration increase resulted in a decrease in efficiency, whereas adsorbent dose increase improved it. Equilibrium data of adsorption followed isotherms models: Langmuir and Freundlich. The highest removal efficiency and adsorption capacity were, respectively, 83% and 17.27 mg g<sup>-1</sup>. Furthermore, absorption kinetics is better described by the pseudo second-order model. According to the results obtained, pumice coated with INPs is an effective adsorbent and can be introduced as a suitable option in practical applications</p>

scholarly journals Application of treated eggplant peel as a low-cost adsorbent for water treatment toward elimination of Pb2+: Kinetic modeling and isotherm study

2018 ◽  
Vol 36 (3-4) ◽  
pp. 1112-1143 ◽  
Author(s):  
Mohammad Hossein Karimi Darvanjooghi ◽  
Seyyed Mohammadreza Davoodi ◽  
Arzu Y Dursun ◽  
Mohammad Reza Ehsani ◽  
Iman Karimpour ◽  
...  
Keyword(s):  
Contact Time ◽  
Low Cost ◽  
Standard Free Energy ◽  
Chemical Properties ◽  
Entropy Change ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Standard Entropy ◽  
Adsorption Parameters ◽  
Adsorbent Dose

In this study, treated eggplant peel was used as an adsorbent to remove Pb2+ from aqueous solution. For this purpose batch adsorption experiments were performed for investigating the effect of contact time, pH, adsorbent dose, solute concentrations, and temperature. In order to assess adsorbent’s physical and chemical properties, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used. The results showed that the adsorption parameters for reaching maximum removal were found to be contact time of 110 min, adsorbent dose of 0.01 g/ml, initial lead(II) concentration of 70 ppm, pH of 4, and temperature of 25°C. Moreover, for the experiments carried out at pH > 4 the removal occurred by means of significant precipitation as well as adsorption. Furthermore, these results indicated that the adsorption followed pseudo-second-order kinetics model implying that during the adsorption process strong bond between lead(II) and chemical functional groups of adsorbent surface took place. The process was described by Langmuir model (R2 = 0.99; maximum adsorption capacity 88.33 mg/g). Also thermodynamics of adsorption was studied at various temperatures and the thermodynamic parameters including equilibrium constant (K), standard enthalpy change, standard entropy change, and standard free energy changes were obtained from experimental data.

Removal of Pb(II) ions using Chitosan oligosaccharide/carboxymethyl cellulose/kaolin clay blend

YMER Digital ◽  
2021 ◽  
Vol 20 (11) ◽  
pp. 388-402
Author(s):  
T.N Balaji ◽  
◽  
S.M Ameenur Rahman ◽  
T Gomathi ◽  
S Pavithra ◽  
...  
Keyword(s):  
Carboxymethyl Cellulose ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Theoretical Models ◽  
Ternary Blend ◽  
Kaolin Clay ◽  
Batch Adsorption ◽  
Hydroxyl Groups ◽  
Chitosan Oligosaccharide ◽  
Pb Ions

Heavy metal removal from wastewater has become a major environmental concern around the world. The performance of a chitosan-oligosaccharide-based hybrid (chitosan oligosaccharide (COS)/Carboxymethyl cellulose (CMC)/Kaolin clay (KC) ternary blend material prepared in the presence of Glutaraldehyde (Glu) ternary blend material for the adsorptive removal of lead (Pb) from waterwaste was investigated in this study. The structure of COS with amine and hydroxyl groups helps to remove Pb ions. FTIR and X-Ray diffraction were used to characterize of COS/CMC/KC + Glu blend. The removal of ions was assessed using batch adsorption studies, which varied parameters such as the influence of beginning concentration, adsorbent dose, and contact time. The elimination of Pb ions by adsorption was pH-dependent, with a maximum at pH 5. The favorability of the reported experimental values was validated using several theoretical models such as Freundlich and Langmuir isotherms, pseudo-first-order and pseudo-second-order kinetics. The Langmuir isotherm and pseudosecond-order best fitted for the adsorption.

scholarly journals Removal of cadmium from aqueous solutions using excised leaves of Quetta pine (Pinus halepensis Mill.)

2015 ◽  
Vol 43 (3) ◽  
pp. 277-281 ◽  
Author(s):  
M Rahman ◽  
S Gul ◽  
M Ajmal ◽  
A Iqbal ◽  
Akk Achakzai
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Pinus Halepensis ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Adsorption Efficiency ◽  
Cadmium Removal ◽  
Optimum Ph ◽  
Maximum Contact ◽  
Adsorbent Dose

Removal of cadmium from aqueous solution was studied by using Quetta pine (Pinus halepensis Mill.) leaves. Batch adsorption experiments were performed as a function of appropriate equilibrium time, pH, concentration of adsorbate and amount of adsorbent. The optimum pH required for maximum adsorption was found to be 7.0 and the maximum contact time for the equilibrium was 30 minutes at adsorbent dose of 10 g. The maximum adsorption efficiency of cadmium removal was 98.50%. The results were better fitted by Langmuir than Freundlich isotherm. The separation factor of equilibrium 0.12 and 0.67 showed that Quetta pine leaves are good adsorbent of cadmium from aqueous solution DOI: http://dx.doi.org/10.3329/bjb.v43i3.21598 Bangladesh J. Bot. 43(3): 277-281, 2014 (December)

scholarly journals Biosorption of Cadmium by Fucus spiralis

2004 ◽  
Vol 1 (3) ◽  
pp. 180 ◽  
Author(s):  
Manuel Esteban Sastre de Vicente ◽  
Roberto Herrero ◽  
Pablo Lodeiro ◽  
Bruno Cordero
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Biological Materials ◽  
Ion Concentration ◽  
Adsorption Parameters ◽  
Solution Ph ◽  
Biosorption Process ◽  
Fucus Spiralis ◽  
Biosorption Kinetics

Environmental Context. Conventional processes for the removal of heavy metals from wastewaters generally involves chemical precipitation of metals (changing the pH) followed by a period to allow the metal precipitates to settle and be separated. These processes are inefficient when the metals are at a low concentration and still demand handling and disposal of toxic metal sludges. An alternative method for heavy metal removal is adsorption onto a biological material, biosorption. The biological materials, including agricultural byproducts, bacteria, fungi, yeast, and algae, all which take up heavy metals in substantial quantities, are relatively inexpensive, widely available, and from renewable sources. However, biological materials are complex and the active mechanisms often unclear. Abstract. Cadmium biosorption properties of nonliving, dried brown marine macroalga Fucus spiralis from Galician coast (northwest Spain) have been investigated. The biosorption capacity of the alga strongly depends on solution pH; the uptake is almost negligible at pH ≤ 2 and reaches a plateau at around pH 4.0. Cadmium biosorption kinetics by F. spiralis is relatively fast, with 90% of total adsorption taking place in less than one hour. A pseudo second order mechanism has been proved to be able to predict the kinetic behaviour of the biosorption process. The effect of initial cadmium ion concentration, alga dose, solution pH, and temperature on the biosorption kinetics has been studied. The Langmuir, Freundlich, Langmuir–Freundlich, and Tóth isotherms were used to fit the experimental data and to find out the adsorption parameters. Acid–base properties of the alga have been studied potentiometrically in order to calculate the number of acidic groups and the apparent pK value by using Katchalsky model. The pK obtained is comparable with typical values associated to the ionization of carboxyl groups of alginates, supporting the implication of these groups in the biosorption process.

Sign in / Sign up

Export Citation Format

Share Document