scholarly journals Effects of Printing Parameters on the Fatigue Behaviour of 3D-Printed ABS under Dynamic Thermo-Mechanical Loads

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2362
Author(s):  
Feiyang He ◽  
Muhammad Khan
Keyword(s):  
Fatigue Life ◽  
Layer Thickness ◽  
Fatigue Behaviour ◽  
Fatigue Performance ◽  
Polymer Materials ◽  
Mechanical Loads ◽  
Fused Deposition ◽  
Nozzle Size ◽  
3D Printed ◽  
Printing Parameters

Fused deposition modelling (FDM) is the most widely used additive manufacturing process in customised and low-volume production industries due to its safe, fast, effective operation, freedom of customisation, and cost-effectiveness. Many different thermoplastic polymer materials are used in FDM. Acrylonitrile butadiene styrene (ABS) is one of the most commonly used plastics owing to its low cost, high strength and temperature resistance. The fabricated FDM ABS parts commonly work under thermo-mechanical loads in actual practice. For producing FDM ABS components that show high fatigue performance, the 3D printing parameters must be effectively optimized. Hence, this study evaluated the bending fatigue performance for FDM ABS beams under different thermo-mechanical loading conditions with varying printing parameters, including building orientations, nozzle size, and layer thickness. The combination of three building orientations (0°, ±45°, and 90°), three nozzle sizes (0.4, 0.6, and 0.8 mm) and three-layer thicknesses (0.05, 0.1, and 0.15 mm) were tested at different environmental temperatures ranging from 50 to 70 °C. The study attempted to find the optimal combination of the printing parameters to achieve the best fatigue behaviour of the FDM ABS specimen. The experiential results showed that the specimen with 0° building orientation, 0.8 mm filament width, and 0.15 mm layer thickness vibrated for the longest time before the fracture at each temperature. Both a larger nozzle size and thicker layer height can increase the fatigue life. It was concluded that printing defects significantly decreased the fatigue life of the 3D-printed ABS beam.

scholarly journals Strength Comparison of FDM 3D Printed PLA Made by Different Manufacturers

TEM Journal ◽  
2020 ◽  
pp. 966-970
Author(s):  
Damir Hodžić ◽  
Adi Pandžić ◽  
Ismar Hajro ◽  
Petar Tasić
Keyword(s):  
Experimental Study ◽  
Additive Manufacturing ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Manufacturing Technique ◽  
Plastic Materials ◽  
Wide Range ◽  
3D Printed ◽  
The Difference ◽  
Printing Parameters

Widely used additive manufacturing technique for plastic materials is Fused Deposition Modelling (FDM). The FDM technology has gained interest in industry for a wide range of applications, especially today when large number of different materials on the market are available. There are many different manufacturers for the same FDM material where the difference in price goes up to 50%. This experimental study investigates possible difference in strength of the 3D printed PLA material of five different manufacturers. All specimens are 3D printed on Ultimaker S5 printer with the same printing parameters, and they are all the same colour.

scholarly journals Process Parameter Optimization in Fused Deposition Modeling (FDM) Using Response Surface Methodology (RSM)

2020 ◽  
Author(s):  
Muhammad Salman Mustafa ◽  
Muhammad Qasim Zafar ◽  
Muhammad Arslan Muneer ◽  
Muhammad Arif ◽  
Farrukh Arsalan Siddiqui ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Impact Strength ◽  
Response Surface ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Experimental Results ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Parameters

Abstract Fused Deposition Modeling (FDM) is a widely adopted additive manufacturing process to produce complex 3D structures and it is typically used in the fabrication of biodegradable materials e.g. PLA/PHA for biomedical applications. However, FDM as a fabrication process for such material needs to be optimized to enhance mechanical properties. In this study, dogbone and notched samples are printed with the FDM process to determine optimum values of printing parameters for superior mechanical properties. The effect of layer thickness, infill density, and print bed temperature on mechanical properties is investigated by applying response surface methodology (RSM). Optimum printing parameters are identified for tensile and impact strength and an empirical relation has been formulated with response surface methodology (RSM). Furthermore, the analysis of variance (ANOVA) was performed on the experimental results to determine the influence of the process parameters and their interactions. ANOVA results demonstrate that 44.7% infill density, 0.44 mm layer thickness, and 20C° printing temperatures are the optimum values of printing parameters owing to improved tensile and impact strength respectively. The experimental results were found in strong agreement with the predicted theoretical results.

Properties and applications of electrically conductive thermoplastics for additive manufacturing of sensors

2017 ◽  
Vol 84 (9) ◽  
Author(s):  
Benedikt Hampel ◽  
Samuel Monshausen ◽  
Meinhard Schilling
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Electrical Conductance ◽  
Electrically Conductive ◽  
Fused Deposition ◽  
Printing Technique ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Printing Technique ◽  
Printing Parameters

AbstractIn consequence of the growing diversity of materials in the fused deposition modeling 3D printing technique, electrically conductive materials are commercially available. In this work two filaments based on thermoplastics filled with carbon or metal nanoparticles are analyzed in terms of their electrical conductance. The printing parameters to process the materials with the 3D printer are optimized with the design of experiments (DoE) method. A model to calculate the resistance of such 3D printed structures is presented and a demonstrator as a proof of concept was 3D printed based on these results. In addition, 3D printing of capacitors is investigated.

The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys

2014 ◽  
Vol 891-892 ◽  
pp. 48-53 ◽  
Author(s):  
Dennise Tanoko Ardi ◽  
Yue Gang Li ◽  
Kelvin Hau Kong Chan ◽  
Liam Blunt ◽  
M.R. Bache
Keyword(s):  
Fatigue Life ◽  
Surface Topography ◽  
Low Cycle Fatigue ◽  
Three Dimensional ◽  
Fatigue Behaviour ◽  
Fatigue Performance ◽  
Cycle Fatigue ◽  
Nickel Based Superalloy ◽  
Topographic Parameters

Advanced areal (three-dimensional) characterisation of surface topography was applied to laboratory scale fatigue test specimens manufactured from the nickel based superalloy Alloy720Li. Finishing was deliberately manipulated to offer four distinct grades of topography. Subsequent low cycle fatigue performance was then correlated to a range of parameters selected to represent the surface topography. The aim of the ongoing study is to predict fatigue performance and aid to establish correlations between topographic parameters and fatigue life.

scholarly journals Modelling and Investigation of Crack Growth for 3D-Printed Acrylonitrile Butadiene Styrene (ABS) with Various Printing Parameters and Ambient Temperatures

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3737
Author(s):  
Yousef Lafi A. Alshammari ◽  
Feiyang He ◽  
Muhammad A. Khan
Keyword(s):  
3D Printing ◽  
Crack Growth ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Structural Dynamic ◽  
Fused Deposition ◽  
Nozzle Size ◽  
Printing Parameters ◽  
Butadiene Styrene

Three-dimensional (3D) printing is one of the significant industrial manufacturing methods in the modern era. Many materials are used for 3D printing; however, as the most used material in fused deposition modelling (FDM) technology, acrylonitrile butadiene styrene (ABS) offers good mechanical properties. It is perfect for making structures for industrial applications in complex environments. Three-dimensional printing parameters, including building orientation, layers thickness, and nozzle size, critically affect the crack growth in FDM structures under complex loads. Therefore, this paper used the dynamic bending vibration test to investigate their influence on fatigue crack growth (FCG) rate under dynamic loads and the Paris power law constant C and m. The paper proposed an analytical solution to determine the stress intensity factor (SIF) at the crack tip based on the measurement of structural dynamic response. The experimental results show that the lower ambient temperature, as well as increased nozzle size and layer thickness, provide a lower FCG rate. The printing orientation, which is the same as loading, also slows the crack growth. The linear regression between these parameters and Paris Law’s coefficient also proves the same conclusion.

scholarly journals Effect of 3D Printing Parameters on the Refractive Index, Attenuation Coefficient, and Birefringence of Plastics in Terahertz Range

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Alexander T. Clark ◽  
John F. Federici ◽  
Ian Gatley
Keyword(s):  
Refractive Index ◽  
3D Printing ◽  
Attenuation Coefficient ◽  
Refractive Indices ◽  
Attenuation Coefficients ◽  
Layer Height ◽  
Nozzle Size ◽  
3D Printed ◽  
Printing Parameters ◽  
Real Refractive Index

The refractive indices, attenuation coefficients, and level of birefringence of various 3D printing plastics may change depending on the printing parameters. Transmission terahertz time-domain spectroscopy was used to look for such effects in Copolyester (CPE), Nylon, Polycarbonate (PC), Polylactic acid, and Polypropylene. The thickness of each sample was measured using an external reference structure and time-of-flight measurements. The parameters varied were printer nozzle size, print layer height, and print orientation. Comparison of these parameters showed that a printer’s nozzle size and print layer height caused no change in real refractive index or attenuation coefficient. A change in printing orientation from vertical to horizontal caused an increase both in real refractive index and in attenuation coefficient. In vertically printed samples, the increase in birefringence was proportional to the increase in layer height and inversely proportional to nozzle size. There was no measurable intrinsic birefringence in the horizontally printed samples. These effects should be taken into account in the design of FDM 3D printed structures that demand tailored refractive indices and attenuation coefficients, while also providing a foundation for nondestructive evaluation of FDM 3D printed objects and structures.

Influence of ABS print parameters on a 3D open-source, self-replicable printer

2020 ◽  
Vol 26 (10) ◽  
pp. 1733-1738
Author(s):  
André Luiz Alves Guimarães ◽  
Vicente Gerlin Neto ◽  
Cesar Renato Foschini ◽  
Maximiliano dos Anjos Azambuja ◽  
Luiz Antonio Vasques Hellmeister
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Open Source ◽  
Layer Thickness ◽  
Acrylonitrile Butadiene Styrene ◽  
Influential Factor ◽  
Fused Deposition Modelling ◽  
Content Type ◽  
Fused Deposition ◽  
Printing Parameters

Purpose The purpose of this paper is to investigate and discuss the influence of printing parameters on the mechanical properties of acrylonitrile butadiene styrene (ABS) print by fused deposition modelling (FDM). The mechanical properties of ABS are highly influenced by printing parameters, and they determine the final product quality of printed pieces. Design/methodology/approach For the paper’s purpose, five main parameters (extrusion temperature, infill pattern, air gap, printing speed and layer thickness) were selected and varied during ABS printing on an open-source and self-replicable FDM printer. Three different colors of commercially available ABS were also used to investigate color and printing parameter’s influence on the tensile strength. Findings The research results suggest that two parameters (infill pattern and layer thickness) were most influential on the mechanical properties of print ABS, being able to enhance its tensile strength. Another key influential factor was material color selected prior to printing, which influenced the tensile strength of the print specimen. Originality/value This study provides information on print parameters’ influence on the tensile strength of ABS print on replicable open-source three-dimensional (3D) printers. It also suggests the influence of materials’ color on print pieces’ tensile strength, indicating a new parameter for materials selection for 3D printing.

Tensile and fatigue behavior of layered acrylonitrile butadiene styrene

2015 ◽  
Vol 21 (3) ◽  
pp. 270-278 ◽  
Author(s):  
Sophia Ziemian ◽  
Maryvivian Okwara ◽  
Constance Wilkens Ziemian
Keyword(s):  
Fatigue Life ◽  
Fatigue Testing ◽  
Fatigue Behavior ◽  
Acrylonitrile Butadiene Styrene ◽  
Fatigue Performance ◽  
Experimental Investigations ◽  
Content Type ◽  
Astm Standard ◽  
Fused Deposition ◽  
Butadiene Styrene

Purpose – This paper aims to define the effect of specimen mesostructure on the monotonic tensile behavior and tensile-fatigue life of layered acrylonitrile butadiene styrene (ABS) components fabricated by fused deposition modeling (FDM). Design/methodology/approach – Tensile tests were performed on FDM dogbone specimens with four different raster orientations according to ASTM standard D638-03. Resulting ultimate tensile stresses (UTS) for each raster orientation were used to compute the maximum stress for fatigue testing, i.e. 90, 75, 60 and 50 or 45 per cent nominal values of the UTS. Multiple specimens were subjected to tension – tension fatigue cycling with stress ratio of R = 0.10 in accordance with ASTM standard D7791-12. Findings – Both tensile strength and fatigue performance exhibited anisotropic behavior. The longitudinal (0°) and default (+45/−45°) raster orientations performed significantly better than the diagonal (45°) or transverse (90°) orientations in regards to fatigue life, as displayed in the resulting Wohler curves. Practical implications – Raster orientation has a significant effect on the fatigue performance of FDM ABS components. Aligning FDM fibers along the axis of the applied stress provides improved fatigue life. If the direction of applied stresses is not expected to be constant in given application, the default raster orientation is recommended. Originality/value – This project provides knowledge to the limited work published on the fatigue performance of FDM ABS components. It provides S-N fatigue life results that can serve as a foundation for future work, combining experimental investigations with theoretical principles and the statistical analysis of data.

scholarly journals Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1758
Author(s):  
Ming-Hsien Hsueh ◽  
Chao-Jung Lai ◽  
Shi-Hao Wang ◽  
Yu-Shan Zeng ◽  
Chia-Hsin Hsieh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Deformation ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Thermal And Mechanical Properties ◽  
Fused Deposition ◽  
Internal Structures ◽  
Deposition Modeling ◽  
3D Printed ◽  
Printing Parameters

Fused Deposition Modeling (FDM) can be used to manufacture any complex geometry and internal structures, and it has been widely applied in many industries, such as the biomedical, manufacturing, aerospace, automobile, industrial, and building industries. The purpose of this research is to characterize the polylactic acid (PLA) and polyethylene terephthalate glycol (PETG) materials of FDM under four loading conditions (tension, compression, bending, and thermal deformation), in order to obtain data regarding different printing temperatures and speeds. The results indicated that PLA and PETG materials exhibit an obvious tensile and compression asymmetry. It was observed that the mechanical properties (tension, compression, and bending) of PLA and PETG are increased at higher printing temperatures, and that the effect of speed on PLA and PETG shows different results. In addition, the mechanical properties of PLA are greater than those of PETG, but the thermal deformation is the opposite. The above results will be a great help for researchers who are working with polymers and FDM technology to achieve sustainability.

Correlation between production parameters and mechanical properties of ABS plus p430 fused deposition material

2021 ◽  
pp. 095440622110272
Author(s):  
M Corsi ◽  
S Bagassi ◽  
MC Moruzzi ◽  
L Seccia
Keyword(s):  
Mechanical Properties ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Testing Machine ◽  
Experimental Studies ◽  
Deep Understanding ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Production Parameters ◽  
Printing Parameters

Fused Deposition Modeling (FDM), is one of the most popular and widely used Additive Manufacturing filament based technology employing materials such as Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC), Thermoplastic Polyurethane (TPU) and Polylactic Acid (PLA). In this technique, the part is built up layer-by-layer, affecting, both the resolution along the z-axis, and the mechanical properties dependent on the mesostructure, controlled by a large amount of production parameters such as layer thickness, raster orientation, number of contour and air gap. When dealing with functional and structural printed parts, a deep understanding of these tunable building parameters and their influence on the mechanical properties is of the utmost importance and over the years many experimental studies have been carried to investigate this need. This study is intended to explore specimens realized through FDM technique with different combinations of printing parameters to analyse their effect on the mechanical properties of ABS Plus p430. To this aim, tensile and compression specimens, had been designed and tested. Sixteen different types of tensile specimen had been realized by varying four different parameters, namely, layer thickness, part interior style, infill orientation and number of contours. Whereas, the number of compression specimens had been limited to four considering the variation of two parameters: layer thickness and part interior style. Three samples for each specimen had been produced in ABS Plus p430 using a Stratasys Fortus 250mc FDM printer and tested with a universal testing machine through tension and compression tests to analyse the correlation between printing parameters and material properties. Test results had led to important conclusions on the consistency and homogeneity of the mechanical properties and on the variation of the material’s performances in accordance with the different combinations of production parameters.

Sign in / Sign up

Export Citation Format

Share Document