scholarly journals Relationship between FDM 3D Printing Parameters Study: Parameter Optimization for Lower Defects

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2190
Author(s):  
Patrich Ferretti ◽  
Christian Leon-Cardenas ◽  
Gian Maria Santi ◽  
Merve Sali ◽  
Elisa Ciotti ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Research Attention ◽  
Fused Deposition ◽  
Defect Rate ◽  
Study Parameter ◽  
Deposition Modeling ◽  
Process Viability ◽  
Diverse Individual ◽  
Printing Parameters

Technology evolution and wide research attention on 3D printing efficiency and processes have given the prompt need to reach an understanding about each technique’s prowess to deliver superior quality levels whilst showing an economical and process viability to become mainstream. Studies in the field have struggled to predict the singularities that arise during most Fused Deposition Modeling (FDM) practices; therefore, diverse individual description of the parameters have been performed, but a relationship study between them has not yet assessed. The proposed study lays the main defects caused by a selection of printing parameters which might vary layer slicing, then influencing the defect rate. Subsequently, the chosen technique for optimization is presented, with evidence of its application viability that suggests that a quality advance would be gathered with such. The results would help in making the FDM process become a reliable process that could also be used for industry manufacturing besides prototyping purposes.

Properties and applications of electrically conductive thermoplastics for additive manufacturing of sensors

2017 ◽  
Vol 84 (9) ◽  
Author(s):  
Benedikt Hampel ◽  
Samuel Monshausen ◽  
Meinhard Schilling
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Electrical Conductance ◽  
Electrically Conductive ◽  
Fused Deposition ◽  
Printing Technique ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Printing Technique ◽  
Printing Parameters

AbstractIn consequence of the growing diversity of materials in the fused deposition modeling 3D printing technique, electrically conductive materials are commercially available. In this work two filaments based on thermoplastics filled with carbon or metal nanoparticles are analyzed in terms of their electrical conductance. The printing parameters to process the materials with the 3D printer are optimized with the design of experiments (DoE) method. A model to calculate the resistance of such 3D printed structures is presented and a demonstrator as a proof of concept was 3D printed based on these results. In addition, 3D printing of capacitors is investigated.

scholarly journals Determining the parameters for a 3D-printing process using the fused deposition modeling in order to manufacture an article with the required structural parameters

2021 ◽  
Vol 2 (1 (110)) ◽  
pp. 70-80
Author(s):  
Oleksii Vambol ◽  
Andrii Kondratiev ◽  
Svitlana Purhina ◽  
Maryna Shevtsova
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Structural Parameters ◽  
Technological Parameters ◽  
Non Linear Programming ◽  
Fused Deposition ◽  
Elasticity Module ◽  
Deposition Modeling ◽  
The Impact ◽  
Printing Parameters

The mass application of FDM technology is slowed down due to the difficulty of selecting 3D printing parameters in order to manufacture an article with the required characteristics. This paper reports a study into the impact of 3D printing parameters (temperature, print speed, layer height) on mechanical parameters (strength, elasticity module), as well as on the accuracy of printing and roughness of the surface of a specimen based on thermoplastic (PLA plastic). Several batches of specimens were fabricated for this study in accordance with ASTM D638 and ASTM D695, which were tested for tension, geometric accuracy, and roughness. Based on the experimental data, regression analysis was carried out and the functional dependences of the strength, elasticity module, printing precision, roughness of a surface on 3D printing parameters (temperature, speed, thickness of the layer) were constructed. In addition, the derived mathematical model underlying a method of non-linear programming has established such printing parameters that could provide for the required properties of a structure. The analytical dependences reported in the current work demonstrate a high enough determination factor in the examined range of parameters. Using functional dependences during the design phase makes it possible to assess the feasibility of its manufacture with the required properties, reduce the time to work out the process of printing it, and give recommendations on the technological parameters of 3D printing. The recommendations from this study could be used to make PLA-plastic articles for various purposes with the required properties

Effect of 3D Printing Parameters on the Tensile Strength of Products

2020 ◽  
Vol 863 ◽  
pp. 103-108
Author(s):  
Tran Anh Son ◽  
Pham Son Minh ◽  
Trung Do Thanh
Keyword(s):  
3D Printing ◽  
Tensile Properties ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Full Factorial Experimental Design ◽  
Full Factorial ◽  
3D Printing Technique ◽  
Printing Parameters

3D printing is a promising digital manufacturing technique that manufactures product parts in a layer fashion. Fused deposition modeling (FDM) is a widely used 3D printing technique that produces components by heating, extruding, and depositing the filaments of thermoplastic polymers. Meanwhile, the properties of FDM-produced parts are significantly influenced by process parameters. These process parameters have different advantages that need to be investigated. This paper examines the effect of some process parameters on the tensile properties of some components produced using FDM technique. The study is performed on polylactic acid (PLA) material, using full factorial experimental design. Furthermore, three process parameter—material, infill density, and infill pattern—are considered. The results indicate that only the infill pattern significantly influences the tensile properties of the model.

scholarly journals A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters

2021 ◽  
Vol 11 (1) ◽  
pp. 639-649
Author(s):  
Ruben Bayu Kristiawan ◽  
Fitrian Imaduddin ◽  
Dody Ariawan ◽  
Ubaidillah ◽  
Zainal Arifin
Keyword(s):  
3D Printing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Critical Parameters ◽  
Future Research ◽  
Printing Process ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
The Difference ◽  
Printing Parameters

Abstract This study aims to review research the progress on factors that affect the 3D printing results of the fused deposition modeling (FDM) process. The review is carried out by mapping critical parameters and characteristics determining FDM parameters, the effects of each parameter, and their interaction with other parameters. The study started from the filament manufacturing process, filament material types, and printing parameters of FDM techniques. The difference in each section has determined different parameters, and the respective relationships between parameters and other determinants during printing have a significant effect on printing results. This study also identifies several vital areas of previous and future research to optimize and characterize the critical parameters of the FDM printing process and FDM filament manufacturing.

Influence of Layer Parameters in Fused Deposition Modeling Three-Dimensional Printing on the Tensile Strength of a Product

2020 ◽  
Vol 861 ◽  
pp. 182-187
Author(s):  
Vinh Du Nguyen ◽  
Thai Xiem Trinh ◽  
Son Minh Pham ◽  
Trong Huynh Nguyen
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Layer Height ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Parameters

Additive manufacturing (3D printing) is a hopeful technique that is used to produce complex geometry parts in a layer-by-layer method. Fused deposition modeling (FDM) is a popular 3D printing technology for producing components of thermoplastic polymers. In FDM process, the part quality is influenced strongly by the printing parameters. Until now, these parameters stil need to be investigated. Therefore, in this study, the influence of FDM 3D printing parameters on the tensile strength of product will be investigated. By experiment, three parameters, that is, layer height, solid layer top, and first-layer height, were studied. The investigation shows that the layer height is the only parameter impacted the tensile strength of the product.

Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery

2018 ◽  
Author(s):  
Michael A. Luzuriaga ◽  
Danielle R. Berry ◽  
John C. Reagan ◽  
Ronald A. Smaldone ◽  
Jeremiah J. Gassensmith
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Transdermal Drug Delivery ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Modeling Software ◽  
Deposition Modeling ◽  
3D Printed ◽  
Microfabrication Technique ◽  
Mechanical Strengths

Biodegradable polymer microneedle (MN) arrays are an emerging class of transdermal drug delivery devices that promise a painless and sanitary alternative to syringes; however, prototyping bespoke needle architectures is expensive and requires production of new master templates. Here, we present a new microfabrication technique for MNs using fused deposition modeling (FDM) 3D printing using polylactic acid, an FDA approved, renewable, biodegradable, thermoplastic material. We show how this natural degradability can be exploited to overcome a key challenge of FDM 3D printing, in particular the low resolution of these printers. We improved the feature size of the printed parts significantly by developing a post fabrication chemical etching protocol, which allowed us to access tip sizes as small as 1 μm. With 3D modeling software, various MN shapes were designed and printed rapidly with custom needle density, length, and shape. Scanning electron microscopy confirmed that our method resulted in needle tip sizes in the range of 1 – 55 µm, which could successfully penetrate and break off into porcine skin. We have also shown that these MNs have comparable mechanical strengths to currently fabricated MNs and we further demonstrated how the swellability of PLA can be exploited to load small molecule drugs and how its degradability in skin can release those small molecules over time.

scholarly journals 3D Printing of Mini Tablets for Pediatric Use

2021 ◽  
Vol 14 (2) ◽  
pp. 143
Author(s):  
Julius Krause ◽  
Laura Müller ◽  
Dorota Sarwinska ◽  
Anne Seidlitz ◽  
Malgorzata Sznitowska ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Dosage Forms ◽  
Small Scale ◽  
Fused Deposition ◽  
On Demand ◽  
Pediatric Diseases ◽  
Deposition Modeling ◽  
Manufacturing Techniques ◽  
Pediatric Use

In the treatment of pediatric diseases, suitable dosages and dosage forms are often not available for an adequate therapy. The use of innovative additive manufacturing techniques offers the possibility of producing pediatric dosage forms. In this study, the production of mini tablets using fused deposition modeling (FDM)-based 3D printing was investigated. Two pediatric drugs, caffeine and propranolol hydrochloride, were successfully processed into filaments using hyprolose and hypromellose as polymers. Subsequently, mini tablets with diameters between 1.5 and 4.0 mm were printed and characterized using optical and thermal analysis methods. By varying the number of mini tablets applied and by varying the diameter, we were able to achieve different release behaviors. This work highlights the potential value of FDM 3D printing for the on-demand production of patient individualized, small-scale batches of pediatric dosage forms.

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Sign in / Sign up

Export Citation Format

Share Document