scholarly journals Hygrothermal Aging Characteristics of Silicone-Modified Aging-Resistant Epoxy Resin Insulating Material

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2145
Author(s):  
Yongqiang Wang ◽  
Zhuo Zeng ◽  
Meng Gao ◽  
Ziye Huang
Keyword(s):  
Dielectric Properties ◽  
Epoxy Resin ◽  
Aging Process ◽  
Contact Angles ◽  
Infrared Spectrometry ◽  
Insulation Material ◽  
Hygrothermal Aging ◽  
Insulation Materials ◽  
Dielectric Performance ◽  
Ft Ir

To study the improvement effect of silicone materials on the hygrothermal resistance of epoxy resin and the aging mechanism of silicone-modified insulation materials under hygrothermal conditions, diphenylsilanediol was added to epoxy resin as a modifier in various quantities to synthesize silicone-modified epoxy resin, and a hygrothermal aging test was carried out. Water sorption, surface contact angles and dielectric properties of the insulation material were measured, and scanning electron microscope (SEM), Fourier-transform infrared spectrometry (FT-IR) and frequency domain spectroscopy (FDS) were used to analyze the results. The results showed that under 10 wt%, the silicone-modified insulation materials exhibited lower absorption rate and better dielectric properties, including lower dissipation factors and lower dielectric constant during the hygrothermal aging process, while epoxy resin modified with excessive silicone material tend to show worse dielectric performance. Closer analysis found that diphenylsilanediol decreases the size of the cracks within the material during hygrothermal aging, indicating that cracks generated during the hygrothermal aging process may be the reason for the worse dielectric performance, and diphenylsilanediol improves the hygrothermal aging resistance mainly by slowing down the generation and growth rate of cracks. FT-IR results confirmed the existence of hydrolysis and found that the rate of hydrolysis does not change with the content of diphenylsilanediol. FDS results also indicated that modified materials contain less dipoles after hygrothermal aging.

Studies on Thermal Property of Silica Aerogel/Epoxy Composite

2007 ◽  
Vol 546-549 ◽  
pp. 1581-1584 ◽  
Author(s):  
Jiu Peng Zhao ◽  
Deng Teng Ge ◽  
Sai Lei Zhang ◽  
Xi Long Wei
Keyword(s):  
Thermal Conductivity ◽  
Thermal Property ◽  
Epoxy Resin ◽  
Silica Aerogel ◽  
Epoxy Composite ◽  
Transfer Model ◽  
Insulation Material ◽  
Thermal Transfer ◽  
Heat Distortion Temperature ◽  
Ft Ir

Silica aerogel/epoxy composite, a kind of efficient thermal insulation material, was prepared by doping silica aerogel of different sizes into epoxy resin through thermocuring process. The results of thermal experiments showed that silica aerogel/epoxy composite had a lower thermal conductivity (0.105W/(m·k) at 60 wt% silica aerogel) and higher serviceability temperature (Martens heat distortion temperature: 160°C at 20 wt% silica aerogel). In addition, the composite doping larger size (0.2-2mm) of silica aerogel particle had lower thermal conductivity and higher Martens heat distortion temperature. Based on the results of SEM and FT-IR, the thermal transfer model was established. Thermal transfer mechanism and the reasons of higher Martens heat distortion temperature have been discussed respectively.

The hygrothermal aging process and mechanism of the novolac epoxy resin

2016 ◽  
Vol 107 ◽  
pp. 1-8 ◽  
Author(s):  
Man Wang ◽  
Xiaowei Xu ◽  
Jin Ji ◽  
Yang Yang ◽  
Jianfeng Shen ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Aging Process ◽  
Hygrothermal Aging ◽  
Novolac Epoxy

scholarly journals A REVIEW OF STUDY AND PERFORMANCE OF PARTIAL DISCHARGE FOR DIFFERENT TYPE OF INSULATION MATERIALS

2020 ◽  
Vol 5 (12) ◽  
pp. 156-159
Author(s):  
Khushboo Patareya ◽  
Arun Pachori
Keyword(s):  
Epoxy Resin ◽  
High Voltage ◽  
Power Transmission ◽  
Partial Discharge ◽  
Insulation Material ◽  
High Quality ◽  
Insulation Materials ◽  
Voltage Application ◽  
And Performance

The insulation should be high quality for power transmission and high voltage application, in this way we are studying about the various type of insulation material such as epoxy resin, vulcanized fibres and polyethylene which are having different capacitance value, the power transmission equipment’s has less efficiency due to degradation of insulation material. In this paper, we are studying the partial discharge for the different type of insulation materials.

scholarly journals Application of the Gaussian Mixture Model to Classify Stages of Electrical Tree Growth in Epoxy Resin

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2562
Author(s):  
Abdullahi Abubakar Mas’ud ◽  
Arunachalam Sundaram ◽  
Jorge Alfredo Ardila-Rey ◽  
Roger Schurch ◽  
Firdaus Muhammad-Sukki ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Gaussian Mixture Model ◽  
Mixture Model ◽  
Tree Growth ◽  
Asset Management ◽  
Gaussian Mixture ◽  
Growth Stages ◽  
Insulation Material ◽  
Electrical Tree ◽  
Electrical Trees

In high-voltage (HV) insulation, electrical trees are an important degradation phenomenon strongly linked to partial discharge (PD) activity. Their initiation and development have attracted the attention of the research community and better understanding and characterization of the phenomenon are needed. They are very damaging and develop through the insulation material forming a discharge conduction path. Therefore, it is important to adequately measure and characterize tree growth before it can lead to complete failure of the system. In this paper, the Gaussian mixture model (GMM) has been applied to cluster and classify the different growth stages of electrical trees in epoxy resin insulation. First, tree growth experiments were conducted, and PD data captured from the initial to breakdown stage of the tree growth in epoxy resin insulation. Second, the GMM was applied to categorize the different electrical tree stages into clusters. The results show that PD dynamics vary with different stress voltages and tree growth stages. The electrical tree patterns with shorter breakdown times had identical clusters throughout the degradation stages. The breakdown time can be a key factor in determining the degradation levels of PD patterns emanating from trees in epoxy resin. This is important in order to determine the severity of electrical treeing degradation, and, therefore, to perform efficient asset management. The novelty of the work presented in this paper is that for the first time the GMM has been applied for electrical tree growth classification and the optimal values for the hyperparameters, i.e., the number of clusters and the appropriate covariance structure, have been determined for the different electrical tree clusters.

scholarly journals Improving flexural and dielectric properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition

2020 ◽  
Vol 9 (1) ◽  
pp. 1170-1182
Author(s):  
Muhammad Razlan Zakaria ◽  
Hazizan Md Akil ◽  
Mohd Firdaus Omar ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Aslina Anjang Ab Rahman ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Dielectric Properties ◽  
Carbon Fiber ◽  
Composite Laminates ◽  
Epoxy Composite ◽  
Flexural Modulus ◽  
X Ray Diffraction ◽  
Electrospray Deposition ◽  
Ft Ir ◽  
Carbon Fiber Epoxy

AbstractThe electrospray deposition method was used to deposit carbon nanotubes (CNT) onto the surfaces of woven carbon fiber (CF) to produce woven hybrid carbon fiber–carbon nanotubes (CF–CNT). Extreme high-resolution field emission scanning electron microscopy (XHR-FESEM), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR) were used to analyze the woven hybrid CF–CNT. The results demonstrated that CNT was successfully and homogenously distributed on the woven CF surface. Woven hybrid CF–CNT epoxy composite laminates were then prepared and compared with woven CF epoxy composite laminates in terms of their flexural and dielectric properties. The results indicated that the flexural strength, flexural modulus and dielectric constant of the woven hybrid CF–CNT epoxy composite laminates were improved up to 19, 27 and 25%, respectively, compared with the woven CF epoxy composite laminates.

scholarly journals Effect of Terminal Groups on Thermomechanical and Dielectric Properties of Silica–Epoxy Composite Modified by Hyperbranched Polyester

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2451
Author(s):  
Jianwen Zhang ◽  
Dongwei Wang ◽  
Lujia Wang ◽  
Wanwan Zuo ◽  
Lijun Zhou ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Binding Energy ◽  
Epoxy Resin ◽  
Volume Fraction ◽  
Epoxy Composite ◽  
Mean Square Displacement ◽  
Mean Square ◽  
Hyperbranched Polyester ◽  
Free Volume Fraction

To study the effect of hyperbranched polyester with different kinds of terminal groups on the thermomechanical and dielectric properties of silica–epoxy resin composite, a molecular dynamics simulation method was utilized. Pure epoxy resin and four groups of silica–epoxy resin composites were established, where the silica surface was hydrogenated, grafted with silane coupling agents, and grafted with hyperbranched polyester with terminal carboxyl and terminal hydroxyl, respectively. Then the thermal conductivity, glass transition temperature, elastic modulus, dielectric constant, free volume fraction, mean square displacement, hydrogen bonds, and binding energy of the five models were calculated. The results showed that the hyperbranched polyester significantly improved the thermomechanical and dielectric properties of the silica–epoxy composites compared with other surface treatments, and the terminal groups had an obvious effect on the enhancement effect. Among them, epoxy composite modified by the hyperbranched polyester with terminal carboxy exhibited the best thermomechanical properties and lowest dielectric constant. Our analysis of the microstructure found that the two systems grafted with hyperbranched polyester had a smaller free volume fraction (FFV) and mean square displacement (MSD), and the larger number of hydrogen bonds and greater binding energy, indicating that weaker strength of molecular segments motion and stronger interfacial bonding between silica and epoxy resin matrix were the reasons for the enhancement of the thermomechanical and dielectric properties.

Thermal stable honokiol-derived epoxy resin with reinforced thermal conductivity, dielectric properties and flame resistance

2021 ◽  
Vol 412 ◽  
pp. 128647
Author(s):  
Jingjing Meng ◽  
Pengfei Chen ◽  
Rui Yang ◽  
Linli Dai ◽  
Cheng Yao ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Dielectric Properties ◽  
Epoxy Resin ◽  
Flame Resistance ◽  
Thermal Stable

Preparation and Properties of Silicon-Containing Arylacetylene Resins with Octa(maleimidophenyl)silsesquioxane

2012 ◽  
Vol 557-559 ◽  
pp. 1152-1156
Author(s):  
Yan Zhou ◽  
Fu Wei Huang ◽  
Fa Rong Huang ◽  
Lei Du
Keyword(s):  
Thermal Stability ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Thermal Polymerization ◽  
Curing Process ◽  
Thermal Stabilities ◽  
Curing Reaction ◽  
Air Atmosphere ◽  
Ft Ir ◽  
Dsc Analyses

Modified silicon-containing arylacetylene resins (DMSEPE-OMPS) were prepared from poly(dimethylsilyleneethynylenephenyleneethynylene) (DMSEPE) and Octa(maleimidophenyl)- silsesquioxane (OMPS). The curing reaction of DMSEPE-OMPS resin was studied by FT-IR and DSC techniques. Thermal stability and dielectric properties of cured DMSEPE-OMPS resins were determined. FT-IR and DSC analyses indicate that thermal polymerization of DMSEPE-OMPS resin occurs in the curing process. Thermal stabilities of cured DMSEPE-OMPS resins under N2 and air atmosphere decrease gradually with the increment of OMPS components. The incorporation of OMPS can obviously reduce dielectric constant of DMSEPE-OMPS resins.

Magnetic Nanoparticles Derivatized with Dual Functional Groups for Environmental Applications

2010 ◽  
Vol 148-149 ◽  
pp. 949-952
Author(s):  
Hai Bo He ◽  
Qing Zhong Guo
Keyword(s):  
Magnetic Nanoparticles ◽  
Environmental Remediation ◽  
Infrared Spectrometry ◽  
X Ray Diffraction ◽  
Water Contact ◽  
Dual Functional ◽  
New Material ◽  
Ft Ir ◽  
Contact Angle Analysis ◽  
Effective Sorbent

In this study, the magnetic nanoparticles derivatized with dual functional moieties of dodecyl and mercapto were prepared, which characterized by X-ray diffraction (XRD), scanning electron microscope(SEM), surface area and pore size determination, fourier transform infrared spectrometry (FT-IR) and water contact angle analysis. The new material was proved to be an effective sorbent for environmental remediation.

Sign in / Sign up

Export Citation Format

Share Document