scholarly journals Conductive Polymer (Graphene/PPy)–BiPO4 Composite Applications in Humidity Sensors

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 2013
Author(s):  
Zhen Zhu ◽  
Wang-De Lin ◽  
Zhi-Yi Lin ◽  
Ming-Hong Chuang ◽  
Ren-Jang Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Conductive Polymer ◽  
Humidity Sensors ◽  
Impedance Sensing ◽  
X Ray ◽  
Transmission Electron ◽  
Excellent Candidate ◽  
Response And Recovery ◽  
Moisture Sensitive ◽  
A Chain

In this particular experiment, a chain of conductive polymer graphene/polypyrrole (Gr/PPy) and BiPO4—or (Gr/PPy)–BiPO4—materials were prepared and used as moisture-sensitive materials. The structure and morphology of the conductive polymer (Gr/PPy)–BiPO4 materials were analyzed using an X-ray diffractometer, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Moreover, properties such as hysteresis loop, impedance, sensing response, and response and recovery time were calculated and evaluated using an inductance–capacitance–resistance analyzer. The data expressed that PPy/BiPO4, as prepared in this study, exhibited excellent sensing properties, with impedance changing by only a few orders of range. Furthermore, the response time and time of recovery were 340 s and 60 s, respectively, and negligible humidity hysteresis occurred at different relative humidities. Therefore, conductive PPy/BiPO4, as prepared in the present study, is an excellent candidate for application in humidity sensors.

scholarly journals Vertically Aligned WO3–CuO Core–Shell Nanorod Arrays for Ultrasensitive NH3 Detection

NANO ◽  
2018 ◽  
Vol 13 (10) ◽  
pp. 1850122 ◽  
Author(s):  
Wenjun yan ◽  
Ming Hu
Keyword(s):  
Electron Microscopy ◽  
Core Shell ◽  
Nanorod Arrays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Text Type ◽  
Transmission Electron ◽  
Pt Electrodes ◽  
Response And Recovery ◽  
Vertically Aligned

Vertically aligned WO3–CuO core–shell nanorod arrays for NH3 sensing are prepared. The sensor is fabricated by preparing WO3–CuO nanorod arrays directly on silicon wafer with interdigital Pt electrodes. The WO3–CuO nanorod arrays are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The sensor based on the vertically aligned WO3–CuO nanorod arrays exhibits ultrasensitive NH3 detection, indicating [Formula: see text]-type behavior. The optimum sensing temperature is found to be about 150[Formula: see text]C. Both response and recovery time to NH3 ranging from 50[Formula: see text]ppm to 500[Formula: see text]ppm are around 10–15[Formula: see text]s. A possible NH3 sensing mechanism of the vertically aligned hybrid nanorod arrays is proposed.

scholarly journals Effects of Surfactants on the Performance ofCeO2Humidity Sensor

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
Chunjie Wang ◽  
Aihua Zhang ◽  
Hamid Reza Karimi
Keyword(s):  
Recovery Time ◽  
Cetyltrimethylammonium Bromide ◽  
Humidity Sensor ◽  
X Ray Diffraction ◽  
Humidity Sensors ◽  
X Ray ◽  
Transmission Electron ◽  
Three Samples ◽  
Different Types ◽  
Response And Recovery

NanosizedCeO2powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG), cetyltrimethylammonium bromide (CTAB), and sodium dodecylbenzenesulfonate (SDBS)). X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C) has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated byCeO2-C shows higher performance than those usedCeO2-P andCeO2-S. The impedance of theCeO2-C sensor decreases by about five orders of magnitude with relative humidity (RH) changing from 15.7 to 95%. The response and recovery time are 7 and 7 s, respectively. These results indicate that the performance ofCeO2humidity sensors can be improved effectively by the addition of cationic surfactant.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Use of SEM, X-ray analysis and TEM to localize Fe3+ reduction in roots

1988 ◽  
Vol 46 ◽  
pp. 392-393 ◽  
Author(s):  
William P. Wergin ◽  
P. F. Bell ◽  
Rufus L. Chaney
Keyword(s):  
Electron Microscopy ◽  
Root Hairs ◽  
Rapid Reduction ◽  
X Ray ◽  
Physical Evidence ◽  
Transmission Electron ◽  
Young Root ◽  
Insoluble Precipitate ◽  
Uptake And Transport ◽  
Scanning Electron

In dicotyledons, Fe3+ must be reduced to Fe2+ before uptake and transport of this essential macronutrient can occur. Ambler et al demonstrated that reduction along the root could be observed by the formation of a stain, Prussian blue (PB), Fe4 [Fe(CN)6]3 n H2O (where n = 14-16). This stain, which is an insoluble precipitate, forms at the reduction site when the nutrient solution contains Fe3+ and ferricyanide. In 1972, Chaney et al proposed a model which suggested that the Fe3+ reduction site occurred outside the cell membrane; however, no physical evidence to support the model was presented at that time. A more recent study using the PB stain indicates that rapid reduction of Fe3+ occurs in a region of the root containing young root hairs. Furthermore the most pronounced activity occurs in plants that are deficient in Fe. To more precisely localize the site of Fe3+ reduction, scanning electron microscopy (SEM), x-ray analysis, and transmission electron microscopy (TEM) were utilized to examine the distribution of the PB precipitate that was induced to form in roots.

High-resolution x-ray imaging of small copper-rich precipitates in steels

1988 ◽  
Vol 46 ◽  
pp. 528-529
Author(s):  
J. R. Michael ◽  
K. A. Taylor
Keyword(s):  
Electron Microscopy ◽  
Thermomechanical Processing ◽  
Atom Probe ◽  
Ferrite Matrix ◽  
Scanning Transmission Electron Microscope ◽  
Probe Field ◽  
X Ray ◽  
Subsequent Transformation ◽  
Transmission Electron ◽  
Scanning Transmission

Although copper is considered an incidental or trace element in many commercial steels, some grades contain up to 1-2 wt.% Cu for precipitation strengthening. Previous electron microscopy and atom-probe/field-ion microscopy (AP/FIM) studies indicate that the precipitation of copper from ferrite proceeds with the formation of Cu-rich bcc zones and the subsequent transformation of these zones to fcc copper particles. However, the similarity between the atomic scattering amplitudes for iron and copper and the small misfit between between Cu-rich particles and the ferrite matrix preclude the detection of small (<5 nm) Cu-rich particles by conventional transmission electron microscopy; such particles have been imaged directly only by FIM. Here results are presented whereby the Cu Kα x-ray signal was used in a dedicated scanning transmission electron microscope (STEM) to image small Cu-rich particles in a steel. The capability to detect these small particles is expected to be helpful in understanding the behavior of copper in steels during thermomechanical processing and heat treatment.

Magnesium and sulfur in mast cell and basophil granules of lower vertebrates in relation with histamine

1992 ◽  
Vol 50 (2) ◽  
pp. 1596-1597
Author(s):  
Kenichi Takaya
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mast Cell ◽  
Mast Cells ◽  
Tree Frog ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Fresh Frozen ◽  
Ultrathin Sections

Mast cell and basophil granules of the vertebrate contain heparin or related sulfated proteoglycans. Histamine is also present in mammalian mast cells and basophils. However, no histamine is detected in mast cell granules of the amphibian or fish, while it is shown in those of reptiles and birds A quantitative x-ray microanalysis of mast cell granules of fresh frozen dried ultrathin sections of the tongue of Wistar rats and tree frogs disclosed high concentrations of sulfur in rat mast cell granules and those of sulfur and magnesium in the tree frog granules. Their concentrations in tree frog mast cell granules were closely correlated (r=0.94).Fresh frozen dried ultrathin sections and fresh air-dried prints of the tree frog tongue and spleen and young red-eared turtle (ca. 6 g) spleen and heart blood were examined by a quantitative energy-dispersive x-ray microanalysis (X-650, Kevex-7000) for the element constituents of the granules of mast cells and basophils. The specimens were observed by transmission electron microscopy (TEM) (80-200 kV) and followed by scanning transmission electron microscopy (STEM) under an analytical electron microscope (X-650) at an acceleration voltage of 40 kV and a specimen current of 0.2 nA. A spot analysis was performed in a STEM mode for 100 s at a specimen current of 2 nA on the mast cell and basophil granules and other areas of the cells. Histamine was examined by the o-phthalaldehyde method.

The effect of small additions of Cu on precipitation in Al-Mg-Si alloys

1990 ◽  
Vol 48 (2) ◽  
pp. 442-443
Author(s):  
M. Tamizifar ◽  
G. Cliff ◽  
R.W. Devenish ◽  
G.W. Lorimer
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Argon Atmosphere ◽  
Age Hardening ◽  
X Ray ◽  
Transmission Electron ◽  
Heat Treated ◽  
Analytical Electron ◽  
Scanning Transmission

Small additions of copper, <1 wt%, have a pronounced effect on the ageing response of Al-Mg-Si alloys. The object of the present investigation was to study the effect of additions of copper up to 0.5 wt% on the ageing response of a series of Al-Mg-Si alloys and to use high resolution analytical electron microscopy to determine the composition of the age hardening precipitates.The composition of the alloys investigated is given in Table 1. The alloys were heat treated in an argon atmosphere for 30m, water quenched and immediately aged either at 180°C for 15 h or given a duplex treatment of 180°C for 15 h followed by 350°C for 2 h2. The double-ageing treatment was similar to that carried out by Dumolt et al. Analyses of the precipitation were carried out with a HB 501 Scanning Transmission Electron Microscope. X-ray peak integrals were converted into weight fractions using the ratio technique of Cliff and Lorimer.

Time-Resolved Cryo-Electron Microscopy of Oscillating Microtubules

1990 ◽  
Vol 48 (1) ◽  
pp. 502-503
Author(s):  
Eva-Maria Mandelkow ◽  
Ron Milligan
Keyword(s):  
Electron Microscopy ◽  
Dynamic Instability ◽  
Entire Solution ◽  
Reaction Scheme ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
A Chain ◽  
Ray Scattering

Microtubules form part of the cytoskeleton of eukaryotic cells. They are hollow libers of about 25 nm diameter made up of 13 protofilaments, each of which consists of a chain of heterodimers of α-and β-tubulin. Microtubules can be assembled in vitro at 37°C in the presence of GTP which is hydrolyzed during the reaction, and they are disassembled at 4°C. In contrast to most other polymers microtubules show the behavior of “dynamic instability”, i.e. they can switch between phases of growth and phases of shrinkage, even at an overall steady state [1]. In certain conditions an entire solution can be synchronized, leading to autonomous oscillations in the degree of assembly which can be observed by X-ray scattering (Fig. 1), light scattering, or electron microscopy [2-5]. In addition such solutions are capable of generating spontaneous spatial patterns [6].In an earlier study we have analyzed the structure of microtubules and their cold-induced disassembly by cryo-EM [7]. One result was that disassembly takes place by loss of protofilament fragments (tubulin oligomers) which fray apart at the microtubule ends. We also looked at microtubule oscillations by time-resolved X-ray scattering and proposed a reaction scheme [4] which involves a cyclic interconversion of tubulin, microtubules, and oligomers (Fig. 2). The present study was undertaken to answer two questions: (a) What is the nature of the oscillations as seen by time-resolved cryo-EM? (b) Do microtubules disassemble by fraying protofilament fragments during oscillations at 37°C?

Sign in / Sign up

Export Citation Format

Share Document