scholarly journals Influence of ER-CR-YSGG Laser and Photodynamic Therapy on the Dentin Bond Integrity of Nano-Hydroxyapatite Containing Resin Dentin Adhesive: SEM-EDX, Micro-Raman, Micro-Tensile, and FTIR Evaluation

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1903
Author(s):  
Abdullah S. Aljamhan ◽  
Mohammad H. Alrefeai ◽  
Alhanouf Alhabdan ◽  
Sarah A. Alhusseini ◽  
Imran Farooq ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Raman Spectroscopy ◽  
Photodynamic Therapy ◽  
Bond Strength ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Calcium And Phosphorus ◽  
Scanning Electron ◽  
Dentin Adhesive

The study aimed to analyze the effect of the addition of nano-hydroxyapatite (nano-HA) particles on the mechanical properties of experimental adhesive (EA). Furthermore, dentin interaction of EA (without nano-HA) and EA with nano-HA (hereon referred to as HA-10%) were also investigated and equated. Methods consisting of scanning electron microscopy (SEM)–energy-dispersive X-ray spectroscopy (EDX), micro-Raman spectroscopy, micro-tensile bond strength (µTBS) test, and Fourier transform infrared (FTIR) spectroscopy were employed to study nano-HA particles shape, dentin bond strength, degree of conversion (DC), and adhesive–dentin interaction. Ninety teeth (N = 90) were collected, and pre-bonding, conditioning of dentin was performed utilizing phosphoric acid (H3PO4) etching, photodynamic therapy (PDT), and ER-CR-YSGG (ECY) laser. The teeth were set to form bonded specimens using two adhesives. Nano-HA particles were spherical-shaped, and EDX confirmed the presence of oxygen, calcium, and phosphorus. Micro-Raman spectroscopy revealed distinct phosphate and carbonate peaks for nano-HA. The µTBS test demonstrated highest values for HA-10% group on the H3PO4 conditioned dentin. The greatest DC was observed for the EA group. The addition of nano-HA-10 wt.% particles in dentin adhesive resulted in improved bond strength. The incorporation also demonstrated acceptable DC (although lower than EA group), suitable dentin interaction, and resin tag formation.

scholarly journals Application of β-Tricalcium Phosphate in Adhesive Dentin Bonding

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2855
Author(s):  
Mohammad H. AlRefeai ◽  
Eman M. AlHamdan ◽  
Samar Al-Saleh ◽  
Abdulaziz S. Alqahtani ◽  
Mohammad Q. Al-Rifaiy ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Tricalcium Phosphate ◽  
Hybrid Layer ◽  
Future Studies ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Scanning Electron

The study aimed at synthesizing β-tricalcium phosphate (β-TCP) nanoparticles and comparing the mechanical properties and dentin interaction of two adhesives: experimental adhesive (EA) and EA with 5 wt.% β-TCP nanoparticles (β-TCP-5%). These filler nanoparticles were synthesized and then characterized with scanning electron microscopy (SEM) and micro-Raman spectroscopy. The β-TCP nanoparticles were incorporated in the adhesives to form two groups: gp-1: EA (control) and gp-2: β-TCP-5%. These adhesives were characterized by SEM, energy-dispersive X-ray (EDX) spectroscopy and were also assessed for their micro-tensile bond strength (μTBS) with (TC) and without thermocycling (NTC). Fourier Transform Infrared (FTIR) spectroscopy was performed to evaluate the degree of conversion (DC) of two adhesives. The β-TCP filler was seen as irregularly shaped agglomerates on SEM. The micro-Raman spectra revealed characteristic peaks associated with β-TCP nanoparticles. Both adhesives presented suitable dentin interaction, which was demonstrated by the formation of resin tags of variable depths. The EDX analysis verified the existence of calcium (Ca) and phosphate (P) for the β-TCP-5% group. The greatest μTBS values were shown by β-TCP-5% group samples when they were non-thermocycled (NTC) (β-TCP-5%-NTC: 34.11 ± 3.46) followed by the thermocycled (TC) samples of the same group (β-TCP-5%-TC: 30.38 ± 3.66), compared with the EA group. Although the DC presented by β-TCP-5% group was comparable to the EA group, it was still lower. The addition of β-TCP nanoparticles in the adhesive improved its μTBS and resulted in a suitable dentin interaction, seen in the form of hybrid layer and resin tag formation. Nonetheless, a decreased DC was observed for the β-TCP-5% adhesive. Future studies probing the effect of different filler concentrations on various properties of the adhesive are warranted.

scholarly journals Mineral characterization of soil type ranker formed on serpentines occurring in southern Belgrade environs Bubanj Potok

2012 ◽  
Vol 27 (2) ◽  
pp. 131-136
Author(s):  
Bozidar Cekic ◽  
Valentin Ivanovski ◽  
Aleksandar Djordjevic ◽  
Velimir Aleksic ◽  
Zorica Tomic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Soil Type ◽  
X Ray Diffraction ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Detrital Mineral ◽  
Scanning Electron

The paper addresses the issue of health risk associated with the presence of chrysotile in the soil type ranker formed on massive serpentines occurring in the area of Bubanj Potok, a settlement located in the southern Belgrade environs, Serbia. Characterization of the ranker soil was conducted by scanning electron microscopy, X-ray diffraction, micro-Raman spectroscopy and transmission 57Fe M?ssbauer spectroscopy. Scanning electron microscopy figures showed regular shaped smectite (montmorillonite) particles, aggregates of chlorite, and elongated sheets of serpentines minerals antigorite. X-ray diffraction analysis confirmed the presence of detrital mineral quartz polymorph as well as minor amounts of other mineral species. Micro-Raman spectroscopy identified the presence of dominant minerals, such as montmorillonite, kaolinite, muscovite, gypsum, calcite, albite, amphiboles (hornblende/kaersutite) and orthoclase. Important polymorph silica modifications of quartz, olivine (forsterite), pyroxene (enstatite/ferrosilite, diopside/hedenbergite), and serpentine (antigorite/lizardite/chrysotile) were identified.

scholarly journals Egyptian Blue Pellets from the First Century BCE Workshop of Kos (Greece): Microanalytical Investigation by Optical Microscopy, Scanning Electron Microscopy-X-ray Energy Dispersive Spectroscopy and Micro-Raman Spectroscopy

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1063
Author(s):  
Ariadne Kostomitsopoulou Marketou ◽  
Fabrizio Andriulo ◽  
Calin Steindal ◽  
Søren Handberg
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Optical Microscopy ◽  
First Century ◽  
Energy Dispersive ◽  
X Ray ◽  
Egyptian Blue ◽  
Micro Raman Spectroscopy ◽  
Scanning Electron

This paper aims to expand our understanding of the processes involved in the production of the artificial pigment Egyptian blue through the scientific examination of pigments found in the first century BCE workshop of the Greek island of Kos. There, 136 Egyptian blue pellets were brought to light, including successfully produced pellets, as well as partially successful and unsuccessful products. This study is based on the examination of eighteen samples obtained from pellets of various textures and tones of blue, including light and dark blue pigments, coarse and fine-grained materials, and one unsuccessful pellet of dark green/grey colour. The samples were examined by optical microscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), and micro-Raman spectroscopy. These complementary microanalytical techniques provide localised information about the chemical and mineralogical composition of this multicomponent material, at a single-grain level. The results shed light on the firing procedure and indicate possible sources for raw materials (beach sand, copper alloys), as well as demonstrating the use of a low-alkali starting mixture. Moreover, two different process for the production of light blue pigments were identified: (a) decreased firing time and (b) grinding of the initially produced pellet and mixing with cobalt-containing material.

Human Dentine Remineralization Under Non-colagen Materials Action

2017 ◽  
Vol 68 (5) ◽  
pp. 928-932
Author(s):  
Agripina Zaharia ◽  
Viorica Ghisman Plescan ◽  
Elena Maria Anghel ◽  
Viorica Musat
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Artificial Saliva ◽  
Composite Layer ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Agarose Hydrogel ◽  
Human Dentine ◽  
Dentine Surface ◽  
Scanning Electron

The purpose of this work is to induce biomimetic remineralization of acid etched coronal human dentine in artificial saliva (AS) under agarose (A) hydrogel or chitosan (CS)-A hydrogel action. The investigations focused on the morphology, chemical composition and crystalline structure of the new remineralized layers grown onto the etched dentinal surface (R) using scanning electron microscopy coupled with energy dispersive X-ray spectrometry and micro-Raman spectroscopy. Experimental results showed that remineralized layers grown in the presence of A or CS-A hydrogels consist in B-type Ca-deficient hydroxyapatite (HAP). After 7 days treatment into artificial saliva under agarose hydrogel, nanorod-like extrafibrilar HAP crystals randomly self-assembled in a discontinuous layer were formed, while in presence of chitosan-agarose hydrogel a continuous compact CS-HAP composite layer was obtained. The new biomimetic layer (A-CS4) formed after 4 days on dentine surface under A-CS hydrogel has higher crystallinity. Longer exposed (7 days) dentine in the presence of agarose hydrogel shows a higher mineral-to-collagen ratio (A7). Since dentine mineralization increases, the collagen quality factor decreases in succession A-CS4]R]A7. Results show a benefic effect of chitosan on remineralization of etched dentine.

scholarly journals Characterization of a Mahamayuri Vidyarajni Sutra excavated in Lu’an, China

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Liu Liu ◽  
Decai Gong ◽  
Zhengquan Yao ◽  
Liangjie Xu ◽  
Zhanyun Zhu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Tang Dynasty ◽  
Optical Microscope ◽  
Lead White ◽  
Scientific Methods ◽  
X Ray ◽  
Micro Raman Spectroscopy ◽  
Scanning Electron

Abstract Historically, sutras played an important role in spreading Buddhist faith and doctrine, and today these remain important records of Buddhist thought and culture. A Mahamayuri Vidyarajni Sutra with polychrome paintings was found inside the cavity on top of the Nanmen Buddhist pagoda, built in the early Tang dynasty (618–627 CE) and located in Anhui Province, China. Textile was found on the preface which is strongly degraded and fragile. Unfortunately, the whole sutra is under severe degradation and is incomplete. Technical analysis based on scientific methods will benefits the conservation of the sutra. Optical microscopy (OM), micro-Raman spectroscopy combined with optical microscope (Raman), scanning electron microscopy in combination with energy dispersive X-ray analysis (SEM–EDS) and Fourier Transform Infrared Spectroscopy (FTIR) were used to characterize the pigment and gilded material, as well as the paper fiber and textile. Pigments such as cinnabar, minium, paratacamite, azurite, lead white were found. Gilded material was identified as gold. A five-heddle warp satin, made of silk, was found as the textile on the preface of the sutra. The sutra’s preface and inner pages were made of paper comprised of bamboo and bark. As a magnificent yet recondite treasure of Buddhism, the sutra was analyzed for a better understanding of the material. A conservation project of the sutra will be scheduled accordingly.

Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3-TiC-ZrO2 Ceramic Composites

2012 ◽  
Vol 476-478 ◽  
pp. 1031-1035
Author(s):  
Wei Min Liu ◽  
Xing Ai ◽  
Jun Zhao ◽  
Yong Hui Zhou
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Flexural Strength ◽  
Relative Density ◽  
Sintering Temperature ◽  
Ceramic Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Al2O3-TiC-ZrO2ceramic composites (ATZ) were fabricated by hot-pressed sintering. The phases and microstructure of the composites were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The relative density and mechanical properties (flexural strength, fracture toughness and Vicker’s hardness) of the composites were tested. The results show that the microstructure of the composites was the gray core-white rim. With the increase of sintering temperature, the relative density and mechanical properties of the composites increased first and then decreased. The composite sintered at 1705°C has the highest synthetical properties, and its relative density, flexural strength, fracture toughness and Vickers hardness are 98.3%,970MPa,6.0 MPa•m1/2and 20.5GPa, respectively.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

scholarly journals Improving the reactivity of phenylacetylene macrocycles toward topochemical polymerization by side chains modification

2014 ◽  
Vol 10 ◽  
pp. 1613-1619 ◽  
Author(s):  
Simon Rondeau-Gagné ◽  
Jules Roméo Néabo ◽  
Maxime Daigle ◽  
Katy Cantin ◽  
Jean-François Morin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Self Assembly ◽  
Significant Enhancement ◽  
Side Chains ◽  
X Ray Diffraction ◽  
X Ray ◽  
Topochemical Polymerization ◽  
Scanning Electron

The synthesis and self-assembly of two new phenylacetylene macrocycle (PAM) organogelators were performed. Polar 2-hydroxyethoxy side chains were incorporated in the inner part of the macrocycles to modify the assembly mode in the gel state. With this modification, it was possible to increase the reactivity of the macrocycles in the xerogel state to form polydiacetylenes (PDAs), leading to a significant enhancement of the polymerization yields. The organogels and the PDAs were characterized using Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM).

UTILIZATION OF FLY ASH AND CONCRETE RESIDUE IN THE PRODUCTION OF GEOPOLYMER BRICKS

2017 ◽  
Vol 12 (1) ◽  
pp. 63-77 ◽  
Author(s):  
Siriporn Sirikingkaew ◽  
Nuta Supakata
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
Phase Composition ◽  
Fly Ash ◽  
Industrial Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

This study presents the development of geopolymer bricks synthetized from industrial waste, including fly ash mixed with concrete residue containing aluminosilicate compound. The above two ingredients are mixed according to five ratios: 100:0, 95:5, 90:10, 85:15, and 80:20. The mixture's physico-mechanical properties, in terms of water absorption and the compressive strength of the geopolymer bricks, are investigated according to the TIS 168-2546 standard. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses are used to investigate the microstructure and the elemental and phase composition of the brick specimens. The results indicate that the combination of fly ash and concrete residue represents a suitable approach to brick production, as required by the TIS 168–2546 standard.

Sign in / Sign up

Export Citation Format

Share Document