scholarly journals Strontium Aluminate-Based Long Afterglow PP Composites: Phosphorescence, Thermal, and Mechanical Characteristics

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1373
Author(s):  
Anesh Manjaly Poulose ◽  
Arfat Anis ◽  
Hamid Shaikh ◽  
Abdullah Alhamidi ◽  
Nadavala Siva Kumar ◽  
...  
Keyword(s):  
Blue Emission ◽  
Emission Spectra ◽  
Green Emission ◽  
Attenuated Total Reflection ◽  
Strontium Aluminate ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Long Afterglow ◽  
Poly Ethylene ◽  
The Impact

A tremendous potential has been observed in the designing of long afterglow materials for sensing, bioimaging, and encryption applications. In this study, two different strontium aluminate-based luminescent materials; SrAl2O4: Eu, Dy (S1), and Sr4Al14O25: Eu, Dy (S2) were melt-mixed with polypropylene (PP) matrix, and the phosphorescence properties were evaluated. After excitation at 320 nm, the PP/S1 composite exhibited a green emission and the PP/S2 generated a blue emission at 520 nm and 495 nm, respectively. The emission spectra intensity increased by increasing the content of these luminescent fillers. The attenuated total reflection-Fourier transform infrared (ATR-FTIR) experiments show that no chemical reaction occurred during the melt-mixing process. The differential scanning calorimetry (DSC) results revealed that the total crystallinity of the composites reduced by increasing the amount of the fillers; however, no changes in the temperature of melting (Tm) and crystallization (Tc) of PP were observed. Both fillers improved the impact strength of the composites, but the tensile strength (TS) and modulus (TM) decreased. Poly (ethylene glycol) dimethyl ether (P) plasticizer was used to improve the filler-matrix interaction and its dispersion; nevertheless, it adversely affected the intensity of the luminescence emissions.

Toughening Modification of Poly(butylene terephthalate)/Polycarbonate Blends by Poly(ethylene-co-octene)

2005 ◽  
Vol 13 (4) ◽  
pp. 385-394
Author(s):  
Huiyu Bai ◽  
Yong Zhang ◽  
Yinxi Zhang ◽  
Xiangfu Zhang ◽  
Wen Zhou
Keyword(s):  
Average Diameter ◽  
Melt Blending ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Bisphenol A Polycarbonate ◽  
Elongation At Break ◽  
Butylene Terephthalate ◽  
Twin Screw ◽  
Poly Ethylene ◽  
The Impact

New toughened poly(butylene terephthalate) (PBT)/bisphenol A polycarbonate (PC) blends were obtained by melt blending with commercial poly(ethylene-co-octene) copolymer (POE), varying the POE content up to 10 wt%, in a twin screw extruder, followed by injection moulding. The influence of POE on the properties of the PBT/PC blends was investigated in terms of mechanical testing, dynamic mechanical thermal (DMTA) analysis, differential scanning calorimetry (DSC), and scanning electronic microscopy (SEM). The results showed that addition of POE led to remarkable increases in the impact strength, elongation at break and Vicat temperature, and a reduction in the tensile strength and flexural properties of PBT/PC blends. The morphology of the blends was observed using SEM and the average diameter of the dispersed phase was determined by image analysis. The critical inter-particle distance for PBT/PC was determined.

Influence of Transesterification on the Properties of PET/MAPE Blends Prepared by Reactive Extrusion

2011 ◽  
Vol 221 ◽  
pp. 43-47 ◽  
Author(s):  
Li Gong ◽  
Qing Wen Wang ◽  
Yong Ming Song ◽  
Hai Gang Wang ◽  
Shu Juan Sui ◽  
...  
Keyword(s):  
Reactive Extrusion ◽  
Mechanical Tests ◽  
Melt Crystallization ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Sem Micrograph ◽  
Higher Temperature ◽  
Poly Ethylene ◽  
Transesterification Catalyst ◽  
The Impact

Blends based on maleic anhydride grafted polyethylene (MAPE) and poly(ethylene terephthalate)(PET) were prepared through reactive extrusion in the presence of titanium tetrabutoxide (Ti(OBu)4) as transesterification catalyst. Mechanical properties of PET/MAPE blends(70wt./30wt.) were evaluated by mechanical tests. The Effects of Ti(OBu)4 on the structure and melt crystallization behavior of the blends were investigated by Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The addition of Ti(OBu)4 to the blends could improve the compatibility between PET and MAPE as was evidenced by the SEM micrograph in which filaments connected to a network structure was observed. With increasing the contents of Ti(OBu)4, the impact strength of the blends increased obviously, the flexural strength and tensile strength of blends did not change significantly, while the degradation of PET was gradually significant as was evidenced by FTIR analysis. Small amount of Ti(OBu)4 could hinder the crystallization of PET and make its melt peak shifted to higher temperature.

scholarly journals SrAl2O4:Eu2+(,Dy3+) Nanosized Particles: Synthesis and Interpretation of Temperature-Dependent Optical Properties

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Huayna Terraschke ◽  
Markus Suta ◽  
Matthias Adlung ◽  
Samira Mammadova ◽  
Nahida Musayeva ◽  
...  
Keyword(s):  
Emission Band ◽  
Blue Emission ◽  
Emission Spectra ◽  
Green Emission ◽  
Spectroscopic Properties ◽  
Host Lattice ◽  
Nanosized Particles ◽  
Temperature Dependent ◽  
Excitation Spectra ◽  
Blue Emission Band

SrAl2O4nanosized particles (NPs) undoped as well as doped with Eu2+and Dy3+were prepared by combustion synthesis for the discussion of their intensively debated spectroscopic properties. Emission spectra of SrAl2O4:Eu2+(,Dy3+) NPs are composed by a green band at 19 230 cm−1(520 nm) at room temperature, assigned to anomalous luminescence originated by Eu2+in this host lattice. At low temperatures, a blue emission band at 22 520 cm−1(444 nm) is observed. Contrary to most of the interpretations provided in the literature, we assign this blue emission band very reliably to a normal 4f6(7FJ)5d(t2g)→4f7(8S7/2) transition of Eu2+substituting the Sr2+sites. This can be justified by the presence of a fine structure in the excitation spectra due to the different7FJlevels (J=0⋯6) of the 4f6core. Moreover, Fano antiresonances with the6IJ(J=9/2,7/2) levels could be observed. In addition, the Stokes shifts (ΔES=1980 cm−1and 5 270 cm−1for the blue and green emission, resp.), the Huang-Rhys parameters ofS=2.5and 6, and the average phonon energies ofħω=480 cm-1and 470 cm−1coupled with the electronic states could be reliably determined.

scholarly journals Implication of Mn concentration on the properties of cerium oxide thin films

2020 ◽  
Vol 1 (1) ◽  
pp. 1-9
Author(s):  
Suresh R ◽  
◽  
Thirumal Valavan K ◽  
Justin Paul M ◽  
Indira Priyadharshini T ◽  
...  
Keyword(s):  
Cerium Oxide ◽  
Energy Levels ◽  
Blue Emission ◽  
Emission Spectra ◽  
Green Emission ◽  
Fluorite Structure ◽  
Crystal Defects ◽  
Energy Bands ◽  
Ft Ir ◽  
Mn Concentration

Uniform and adhesive Manganese doped cerium oxide (MDC) films are successfully deposited by Nebulizer Spray Pyrolysis (NSP) technique. The MDC films are characterized by XRD, FT-IR, UV-ViS, PL and I-V analysis. X-ray diffraction peaks reveal the single-phase polycrystalline cubic fluorite structure with preferential orientation along (2 0 0) direction. The broad bands observed at 695, 659, 538 and 517 cm-1 are due to the envelope of (Ce=O) symmetric, asymmetric terminal stretching and phonon band of metal oxide (Ce-O) network from FT-IR spectra. The transmittance decreases with Mn concentration due to the increase in scattering of photon by crystal defects created by doping and lower ionic size of Mn. The electrons in the outer orbits have travelled to the higher energy levels and have occupied vacant positions in energy bands. Some of the NBE emission and green emission peaks are vanished at higher doping level of Mn. The occurrence of a strong and broad blue emission peak at 15% for MDC films has been confirmed from emission spectra.

scholarly journals The Comprehensive Approach to Preparation and Investigation of the Eu3+ Doped Hydroxyapatite/poly(L-lactide) Nanocomposites: Promising Materials for Theranostics Application

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1146 ◽  
Author(s):  
Katarzyna Szyszka ◽  
Sara Targonska ◽  
Malgorzata Gazinska ◽  
Konrad Szustakiewicz ◽  
Rafal J. Wiglusz
Keyword(s):  
Emission Spectra ◽  
Calcium Hydroxyapatite ◽  
Spectroscopic Properties ◽  
Precipitation Method ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Twin Screw ◽  
The One ◽  
Properties Of Composites

In response to the need for new materials for theranostics application, the structural and spectroscopic properties of composites designed for medical applications, received in the melt mixing process, were evaluated. A composite based on medical grade poly(L-lactide) (PLLA) and calcium hydroxyapatite (HAp) doped with Eu3+ ions was obtained by using a twin screw extruder. Pure calcium Hap, as well as the one doped with Eu3+ ions, was prepared using the precipitation method and then used as a filler. XRPD (X-ray Powder Diffraction) and IR (Infrared) spectroscopy were applied to investigate the structural properties of the obtained materials. DSC (Differential Scanning Calorimetry) was used to assess the Eu3+ ion content on phase transitions in PLLA. The tensile properties were also investigated. The excitation, emission spectra as well as decay time were measured to determine the spectroscopic properties. The simplified Judd–Ofelt (J-O) theory was applied and a detailed analysis in connection with the observed structural and spectroscopic measurements was made and described.

Blue Emitting BaAl2O4:Ce3+ Nanophosphors with High Color Purity and Brightness for White LEDs

2019 ◽  
Vol 25 (6) ◽  
pp. 1466-1470 ◽  
Author(s):  
Rituparna Chatterjee ◽  
Subhajit Saha ◽  
Karamjyoti Panigrahi ◽  
Uttam Kumar Ghorai ◽  
Gopes Chandra Das ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Field Emission ◽  
Sol Gel ◽  
Blue Emission ◽  
Diffraction Field ◽  
White Leds ◽  
Display Devices ◽  
Transmission Electron ◽  
Structure Morphology ◽  
The Impact

AbstractIn this work, strongly blue emitting Ce3+-activated BaAl2O4 nanophosphors were successfully synthesized by a sol–gel technique. The crystal structure, morphology, and microstructure of the nanophosphors have been studied by X-ray powder diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The photoluminescence spectra show the impact of concentration variation of Ce3+ on the photoluminescence emission of the phosphor. These nanophosphors display intense blue emission peaking at 422 nm generated by the Ce3+ 5d → 4f transition under 350 nm excitation. Our results reveal that this nanophosphor has the capability to take part in the emergent domain of solid-state lighting and field-emission display devices.

scholarly journals The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 890
Author(s):  
Mateusz Barczewski ◽  
Olga Mysiukiewicz ◽  
Aleksander Hejna ◽  
Radosław Biskup ◽  
Joanna Szulc ◽  
...  
Keyword(s):  
Impact Strength ◽  
Mechanical Stability ◽  
Thermomechanical Analysis ◽  
Thermomechanical Properties ◽  
Phenyl Isocyanate ◽  
Sem Analysis ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Expanded Vermiculite ◽  
Chain Extenders

In this work, thermally expanded vermiculite (TE-VMT) was surface modified and used as a filler for composites with a polylactide (PLA) matrix. Modification of vermiculite was realized by simultaneous ball milling with the presence of two PLA chain extenders, aromatic carbodiimide (KI), and 4,4’-methylenebis(phenyl isocyanate) (MDI). In addition to analyzing the particle size of the filler subjected to processing, the efficiency of mechanochemical modification was evaluated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The composites of PLA with three vermiculite types were prepared by melt mixing and subjected to mechanical, thermomechanical, thermal, and structural evaluation. The structure of composites containing a constant amount of the filler (20 wt%) was assessed using FTIR spectroscopy and SEM analysis supplemented by evaluating the final injection-molded samples’ physicochemical properties. Mechanical behavior of the composites was assessed by static tensile test and impact strength hardness measurements. Heat deflection temperature (HDT) test and dynamic thermomechanical analysis (DMTA) were applied to evaluate the influence of the filler addition and its functionalization on thermomechanical properties of PLA-based composites. Thermal properties were assessed by differential scanning calorimetry (DSC), pyrolysis combustion flow calorimetry (PCFC), and thermogravimetric analysis (TGA). The use of filler-reactive chain extenders (CE) made it possible to change the vermiculite structure and obtain an improvement in interfacial adhesion and more favorable filler dispersions in the matrix. This translated into an improvement in impact strength and an increase in thermo-mechanical stability and heat release capacity of composites containing modified vermiculites.

scholarly journals Polymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1118
Author(s):  
Ibrahim Mustapha Alibe ◽  
Khamirul Amin Matori ◽  
Mohd Hafiz Mohd Zaid ◽  
Salisu Nasir ◽  
Ali Mustapha Alibe ◽  
...  
Keyword(s):  
Solid State ◽  
Thermal Treatment ◽  
Band Gap ◽  
Optical Band Gap ◽  
Dopant Concentration ◽  
Blue Emission ◽  
Green Emission ◽  
Band Gap Energy ◽  
Solid State Lighting ◽  
Gap Energy

The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.

scholarly journals Recycling Waste Cotton Cloths for the Isolation of Cellulose Nanocrystals: A Sustainable Approach

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 626
Author(s):  
Siti Hajar Mohamed ◽  
Md. Sohrab Hossain ◽  
Mohamad Haafiz Mohamad Kassim ◽  
Mardiana Idayu Ahmad ◽  
Fatehah Mohd Omar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cellulose Nanocrystals ◽  
Value Added ◽  
Crystallinity Index ◽  
Attenuated Total Reflection ◽  
Cellulose Content ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Alkaline Pulping ◽  
Hydrolysis Of Cellulose

There is an interest in the sustainable utilization of waste cotton cloths because of their enormous volume of generation and high cellulose content. Waste cotton cloths generated are disposed of in a landfill, which causes environmental pollution and leads to the waste of useful resources. In the present study, cellulose nanocrystals (CNCs) were isolated from waste cotton cloths collected from a landfill. The waste cotton cloths collected from the landfill were sterilized and cleaned using supercritical CO2 (scCO2) technology. The cellulose was extracted from scCO2-treated waste cotton cloths using alkaline pulping and bleaching processes. Subsequently, the CNCs were isolated using the H2SO4 hydrolysis of cellulose. The isolated CNCs were analyzed to determine the morphological, chemical, thermal, and physical properties with various analytical methods, including attenuated total reflection-Fourier transform-infrared spectroscopy (ATR-FTIR), field-emission scanning electron microscopy (FE-SEM), energy-filtered transmission electron microscopy (EF-TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results showed that the isolated CNCs had a needle-like structure with a length and diameter of 10–30 and 2–6 nm, respectively, and an aspect ratio of 5–15, respectively. Additionally, the isolated CNCs had a high crystallinity index with a good thermal stability. The findings of the present study revealed the potential of recycling waste cotton cloths to produce a value-added product.

Sign in / Sign up

Export Citation Format

Share Document