scholarly journals Designing Biodegradable and Active Multilayer System by Assembling an Electrospun Polycaprolactone Mat Containing Quercetin and Nanocellulose between Polylactic Acid Films

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1288
Author(s):  
Carol López de Dicastillo ◽  
Luan Garrido ◽  
Eliezer Velásquez ◽  
Adrián Rojas ◽  
Rafael Gavara
Keyword(s):  
Antioxidant Activity ◽  
Thermal Treatment ◽  
Polylactic Acid ◽  
Active Compound ◽  
Cellulose Nanocrystals ◽  
Barrier Properties ◽  
Electrospinning Process ◽  
Multilayer Systems ◽  
Innovative Strategy ◽  
Packaged Foods

The design of multilayer systems is an innovative strategy to improve physical properties of biodegradable polymers and introduce functionality to the materials through the incorporation of an active compound into some of these layers. In this work, a trilayer film based on a sandwich of electrospun polycaprolactone (PCL) fibers (PCLé) containing quercetin (Q) and cellulose nanocrystals (CNC) between extruded polylactic acid (PLA) films was designed with the purpose of improving thermal and barrier properties and affording antioxidant activity to packaged foods. PCLé was successfully electrospun onto 70 µm-thick extruded PLA film followed by the assembling of a third 25 µm-thick commercial PLA film through hot pressing. Optical, morphological, thermal, and barrier properties were evaluated in order to study the effect of PCL layer and the addition of Q and CNC. Bilayer systems obtained after the electrospinning process of PCL onto PLA film were also evaluated. The release of quercetin from bi- and trilayer films to food simulants was also analyzed. Results evidenced that thermal treatment during thermo-compression melted PCL polymer and resulted in trilayer systems with barrier properties similar to single PLA film. Quercetin release from bi- and trilayer films followed a similar profile, but achieved highest value through the addition of CNC.

scholarly journals Supercritical Impregnation of PLA Filaments with Mango Leaf Extract to Manufacture Functionalized Biomedical Devices by 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2125
Author(s):  
José María Rosales ◽  
Cristina Cejudo ◽  
Lidia Verano ◽  
Lourdes Casas ◽  
Casimiro Mantell ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
3D Printing ◽  
Polylactic Acid ◽  
Leaf Extract ◽  
Three Dimensional ◽  
3D Printer ◽  
Pharmacological Properties ◽  
Bioactive Properties ◽  
Supercritical Impregnation ◽  
Mango Leaves

Polylactic Acid (PLA) filaments impregnated with ethanolic mango leaves extract (MLE) with pharmacological properties were obtained by supercritical impregnation. The effects of pressure, temperature and amount of extract on the response variables, i.e., swelling, extract loading and bioactivity of the PLA filaments, were determined. The analysis of the filaments biocapacities revealed that impregnated PLA filaments showed 11.07% antidenaturant capacity and 88.13% antioxidant activity, which after a 9-day incubation shifted to 30.10% and 9.90%, respectively. Subsequently, the same tests were conducted on printed samples. Before their incubation, the printed samples showed 79.09% antioxidant activity and no antidenaturant capacity was detected. However, after their incubation, the antioxidant activity went down to only 2.50%, while the antidenaturant capacity raised up to 23.50%. The persistence of the bioactive properties after printing opens the possibility of using the functionalized PLA filaments as the feed for a three-dimensional (3D) printer.

Modification of Polylactic Acid/ Halloysite Bionanocomposites Using Electron Beam Radiation: Physical, Barrier and Thermal Properties

2020 ◽  
Vol 1002 ◽  
pp. 57-65
Author(s):  
Abdulkader M. Alakrach ◽  
Nik Noriman Zulkepli ◽  
Awad A. Al-Rashdi ◽  
Sam Sung Ting ◽  
Rosniza Hamzah ◽  
...  
Keyword(s):  
Electron Beam ◽  
Polylactic Acid ◽  
Food Packaging ◽  
Electron Beam Irradiation ◽  
Casting Process ◽  
Barrier Properties ◽  
Beam Irradiation ◽  
Beam Radiation ◽  
Electron Beam Processing ◽  
The Impact

This study aimed to develop novel Polylactic acid/ Halloysite (PLA/ HNTs) films which showed better properties when they were used for food packaging. They also displayed better mechanical, barrier, morphological and structural properties when the researchers analysed the impact of the electron beam irradiation on the nanomaterials. They prepared PLA-based nanocomposites containing 5 % w/w of HNTs using the solution casting process. These nanocomposites were further exposed to different ebeam doses (i.e., 0, 20, 40 and 60 kGy). The researchers assessed the effect of the electron beam irradiation on the various properties of the PLA. All the composites showed a homogenous dispersion and distribution of the HNTs in this PLA matrix. Results indicated that the nanocomposites showed better barrier properties in comparison to the neat PLA. Furthermore, the ebeam irradiation could increase the glass-transition temperature and lead to the development of more crosslinks, which increased the degradation temperature and hydrophilicity of the nanocomposites. In this study, the researchers showed that the PLA/HNTs films were effective materials that could be used for the electron beam processing of the pre-packed foods. The best effect was noted for the 20 kGy dosage which was used in the study.

scholarly journals Development of Polylactic Acid Films with Selenium Microparticles and Its Application for Food Packaging

Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 280
Author(s):  
Rui Lu ◽  
Dur E. Sameen ◽  
Wen Qin ◽  
Dingtao Wu ◽  
Jianwu Dai ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Antibacterial Activity ◽  
Polylactic Acid ◽  
Composite Membrane ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Swelling Capacity ◽  
Natural Element

Selenium is a natural element which exists in the human body and plays an important role in metabolism. Along with this, selenium also possesses antibacterial and antioxidant properties. Using selenium microparticles (SeMPs) in food packaging films is exceptional. In this experiment, a solution casting method was used to make film. For this purpose, we used polylactic acid (PLA) as a substrate for the formation of a film membrane while SeMPs were added with certain ratios to attain antibacterial and antioxidant properties. The effects of SeMPs on the PLA film and the value of SeMPs in food packaging film production were investigated. The effects of the SeMPs contents on the features of the film, such as its mechanical property, solubility, swelling capacity, water vapor permeability, antioxidant activity, and the antibacterial activity of the composite membrane against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) strains, were studied. The results manifest that the PLA/SeMPs films showed higher water resistance, UV resistance, antioxidant activity, and antibacterial activity than pure PLA film. When the concentration of SeMPs was 1.5 wt%, the composite membrane showed the best comprehensive performance. Although the tensile strength and elongation at break of the membrane were slightly reduced by the addition of SeMPs, the results show that PLA/SeMPs films are still suitable for food packaging and would be a very promising material for food packaging.

Non-woven Membranes Electrospun from Polylactic Acid Incorporating Silver Nanoparticles as Biocide

2012 ◽  
Vol 1376 ◽  
Author(s):  
Haydee Vargas-Villagran ◽  
Elvia Teran-Salgado ◽  
Maraolina Dominguez-Diaz ◽  
Osvaldo Flores ◽  
Bernardo Campillo ◽  
...  
Keyword(s):  
Contact Angle ◽  
Silver Nanoparticles ◽  
Polylactic Acid ◽  
Chloroform Solution ◽  
Average Diameter ◽  
Electrospinning Process ◽  
Water Contact ◽  
X Ray Scattering ◽  
Angle Measurements ◽  
Contact Angle Measurements

ABSTRACTIn this research, we describe the electrospinning processing of polylactic acid (PLA) and the influence of silver nanoparticles on the morphology and microstructure of produced non woven membranes thus produced. The PLA was electrospun from a chloroform solution and a filamentary and granular morphology was obtained, the filaments having an average diameter of 1.25 μm, When silver nanoparticles (of ca. 12 nm size) were incorporated, the filaments diameter was reduced to an average of 0.65 μm, and the density of beads was also reduced. The membranes were rather amorphous, as revealed by X-ray scattering, presumably due to the quenching process associated with the electrospinning process. Water contact angle measurements showed that silver nanoparticles induced significant hidrophobicity in the membranes as neat PLA membrane had a contact angle of 54° and PLA/Ag membrane exhibited an angle of 115°.

scholarly journals Fabrication and Characterization of Polylactic Acid Electrospun Scaffolds Modified with Multi-Walled Carbon Nanotubes and Hydroxyapatite Nanoparticles

Biomimetics ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 43
Author(s):  
Athanasios Kotrotsos ◽  
Prokopis Yiallouros ◽  
Vassilis Kostopoulos
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Polylactic Acid ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Cost Effective ◽  
Electrospinning Process ◽  
Wide Range ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

The solution electrospinning process (SEP) is a cost-effective technique in which a wide range of polymeric materials can be electrospun. Electrospun materials can also be easily modified during the solution preparation process (prior SEP). Based on this, the aim of the current work is the fabrication and nanomodification of scaffolds using SEP, and the investigation of their porosity and physical and mechanical properties. In this study, polylactic acid (PLA) was selected for scaffold fabrication, and further modified with multi-walled carbon nanotubes (MWCNTs) and hydroxyapatite (HAP) nanoparticles. After fabrication, porosity calculation and physical and mechanical characterization for all scaffold types were conducted. More precisely, the morphology of the fibers (in terms of fiber diameter), the surface properties (in terms of contact angle) and the mechanical properties under the tensile mode of the fabricated scaffolds have been investigated and further compared against pristine PLA scaffolds (without nanofillers). Finally, the scaffold with the optimal properties was proposed as the candidate material for potential future cell culturing.

Sign in / Sign up

Export Citation Format

Share Document