scholarly journals Characterization and Biodegradability of Rice Husk-Filled Polymer Composites

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 104
Author(s):  
Saw Yin Yap ◽  
Srimala Sreekantan ◽  
Mohd Hassan ◽  
Kumar Sudesh ◽  
Ming Thong Ong
Keyword(s):  
Mechanical Properties ◽  
Rice Husk ◽  
Filler Material ◽  
Soil Burial Test ◽  
Elongation At Break ◽  
Soil Burial ◽  
Hydrophilic Nature ◽  
Polybutylene Succinate ◽  
Competitive Pricing

The fabrication of affordable biodegradable plastics remains a challenging issue for both the scientific community and industries as mechanical properties and biodegradability improve at the expense of the high cost of the material. Hence, the present work deals with fabrication and characterization of biodegradable polymer with 40% rice husk waste filler and 60% polymer-containing mixture of polybutylene succinate (PBS) and poly butylenes adipate-Co-terephthalate (PBAT) to achieve good mechanical properties, 92% biodegradation in six months, and competitive pricing. The challenge in incorporating high amounts of hydrophilic nature filler material into hydrophobic PBS/PBAT was addressed by adding plasticizers such as glycerol and calcium stearate. The compatibilizers such as maleic anhydride (MA) and dicumyl peroxide (DCP) was used to improve the miscibility between hydrophobic PBS/PBAT and hydrophilic filler material. The component with the formulation of 24:36:40 (PBS/PBAT/TPRH) possessed the tensile strength of 14.27 MPa, modulus of 200.43 MPa, and elongation at break of 12.99%, which was suitable for the production of molded products such as a tray, lunch box, and straw. The obtained composite polymer achieved 92% mass loss after six months of soil burial test confirming its biodegradability.

Synthesis and Characterization of Biodegradable Starch-Based Bioplastics

2016 ◽  
Vol 846 ◽  
pp. 673-678 ◽  
Author(s):  
Nurul Aina Ismail ◽  
Syuhada Mohd Tahir ◽  
Yahya Norihan ◽  
Muhamad Firdaus Abdul Wahid ◽  
Nur Ezzati Khairuddin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Synthesis And Characterization ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Suitable Alternative ◽  
Soil Burial Test ◽  
Soil Burial ◽  
Starch Potato

This study was carried out to evaluate the potential of plastic synthesized using bio-based starch. The method began with extraction of starch from chosen tubers with high content of starch; potato and yam. The samples were first grated, grinded and strained to obtain crude starch, which then centrifuged and rinsed to get pure starch. The starch was then reacted with hydrochloric acid to breakdown amylopectin to prevent the starch from becoming plastic-like. Finally, propan-1,2,3-triol was added as a plasticizer to increase the elasticity of the product. The chemical, mechanical, and thermal properties of the products were analyzed using Fourier transform infrared (FTIR), tensile strength tester and Thermogravimetric analysis (TGA). The FTIR spectra of the product displayed the presence of O-H, C-H, C=O and C-O absorption peaks, which indicate the formation of bioplastic has already occured. The tensile strength obtained for potato and yam starch-based bioplastic are 0.6 MPa and 1.9 MPa, respectively. The result gained from TGA showed that 50% weight loss occurred at 250°C for potato and 310°C for yam-based plastic. The highly biodegradability of the plastic was proven using soil burial test, which observed the percentage of soil biodegradation for potato and yam-based bioplastic in 1 week duration is 43% and 26%, respectively. These bio-based plastics have exhibited good thermal and mechanical properties with high biodegradability that makes them a suitable alternative for the existing conventional plastics.

scholarly journals Fabrication and Characterization of Electrospun Polycaprolactone Blended with Chitosan-Gelatin Complex Nanofibrous Mats

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Yongfang Qian ◽  
Zhen Zhang ◽  
Laijiu Zheng ◽  
Ruoyuan Song ◽  
Yuping Zhao
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Weight Ratio ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Tissue Engineering Scaffolds ◽  
Elongation At Break ◽  
Nanofibrous Scaffolds ◽  
Two Peaks

Design and fabrication of nanofibrous scaffolds should mimic the native extracellular matrix. This study is aimed at investigating electrospinning of polycaprolactone (PCL) blended with chitosan-gelatin complex. The morphologies were observed from scanning electron microscope. As-spun blended mats had thinner fibers than pure PCL. X-ray diffraction was used to analyze the degree of crystallinity. The intensity at two peaks at 2θof 21° and 23.5° gradually decreased with the percentage of chitosan-gelatin complex increasing. Moreover, incorporation of the complex could obviously improve the hydrophilicity of as-spun blended mats. Mechanical properties of as-spun nanofibrous mats were also tested. The elongation at break of fibrous mats increased with the PCL content increasing and the ultimate tensile strength varied with different weight ratios. The as-spun mats had higher tensile strength when the weight ratio of PCL to CS-Gel was 75/25 compared to pure PCL. Both as-spun PCL scaffolds and PCL/CS-Gel scaffolds supported the proliferation of porcine iliac endothelial cells, and PCL/CS-Gel had better cell viability than pure PCL. Therefore, electrospun PCL/Chitosan-gelatin nanofibrous mats with weight ratio of 75/25 have better hydrophilicity mechanical properties, and cell proliferation and thus would be a promising candidate for tissue engineering scaffolds.

Preparation and Characterization of Starch/PVA Blend for Biodegradable Packaging Material

2010 ◽  
Vol 123-125 ◽  
pp. 351-354 ◽  
Author(s):  
Fahmida Parvin ◽  
Md. Arifur Rahman ◽  
Jahid M.M. Islam ◽  
Mubarak A. Khan ◽  
A.H.M. Saadat
Keyword(s):  
Mechanical Properties ◽  
Packaging Material ◽  
Rice Starch ◽  
Packaging Materials ◽  
Casting Method ◽  
Environment Friendly ◽  
Elongation At Break ◽  
Biodegradable Packaging ◽  
Soil And Water

Polymer films of rice starch/Polyvinyl alcohol (PVA) were prepared by casting method. Different blends were made varying the concentration of rice starch and PVA. Tensile strength (TS) and elongation at break (Eb) of the prepared films were studied. Films made up of rice starch and PVA with a ratio of 2:8 showed highest TS. 10% sugar was added with highest TS giving four composition of Starch/PVA blend in order to increase TS and Eb. Films made up of rice starch and PVA and sugar with a ratio of 1:8:1 showed highest TS and Eb and the recorded value was 14.96MPa and 637% respectively. The physico-mechanical properties of the prepared sugar incorporated films were improved by grafting with acrylic monomer with the aid of UV radiation. A formulation was prepared with monomer, methylmethacrylat in methanol, and a photo initiator. The highest TS of the grafted films were recorded and the value was 16.38 MPa. The water uptake and weight loss in both soil and water of the grafted films are lower than the non-grafted films. The prepared films were further characterized with stereo micrograph and XRD. Finally, the produced film can be used as biodegradable packaging materials for shopping and garbage bags that are very popular and environment friendly.

scholarly journals Development of Photocrosslinkable Urethane-Doped Polyester Elastomers for Soft Tissue Engineering

2011 ◽  
Vol 1 (1) ◽  
pp. 18-31 ◽  
Author(s):  
Yi Zhang ◽  
Richard T. Tran ◽  
Dipendra Gyawali ◽  
Jian Yang
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Soft Tissue ◽  
Hexamethylene Diisocyanate ◽  
Elongation At Break ◽  
Thermally Induced ◽  
Molar Ratios ◽  
3D Network ◽  
Soft Tissue Engineering

Finding an ideal biomaterial with the proper mechanical properties and biocompatibility has been of intense focus in the field of soft tissue engineering. This paper reports on the synthesis and characterization of a novel crosslinked urethane-doped polyester elastomer (CUPOMC), which was synthesized by reacting a previously developed photocrosslinkable poly (octamethylene maleate citrate) (POMC) prepolymers (pre-POMC) with 1,6-hexamethylene diisocyanate (HDI) followed by thermo- or photo-crosslinking polymerization. The mechanical properties of the CUPOMCs can be tuned by controlling the molar ratios of pre-POMC monomers, and the ratio between the prepolymer and HDI. CUPOMCs can be crosslinked into a 3D network through polycondensation or free radical polymerization reactions. The tensile strength and elongation at break of CUPOMC synthesized under the known conditions range from 0.73±0.12MPa to 10.91±0.64MPa and from 72.91±9.09% to 300.41±21.99% respectively. Preliminary biocompatibility tests demonstrated that CUPOMCs support cell adhesion and proliferation. Unlike the pre-polymers of other crosslinked elastomers, CUPOMC pre-polymers possess great processability demonstrated by scaffold fabrication via a thermally induced phase separation method. The dual crosslinking methods for CUPOMC pre-polymers should enhance the versatile processability of the CUPOMC used in various conditions. Development of CUPOMC should expand the choices of available biodegradable elastomers for various biomedical applications such as soft tissue engineering.

Preparation and Characterization of Poly(Vinyl Alcohol)(PVA)/Hydroxyapatite (HA) Nanofibrous Scaffolds

2011 ◽  
Vol 284-286 ◽  
pp. 459-463 ◽  
Author(s):  
Yuan Yuan Qi ◽  
Bin Liu ◽  
Xing Bin Yan
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Tissue Engineering ◽  
Tensile Strength ◽  
Drug Delivery Systems ◽  
Poly Vinyl Alcohol ◽  
Elongation At Break ◽  
Nanofibrous Scaffolds ◽  
Potential Applications

Nanofibrous scaffolds of PVA and HA were prepared by electrospinning. SEM showed the scaffolds had porous nanofibrous morphology, and the diameter of the fibers was in the range of 200-1000 nm. FTIR and XRD showed the presence of HA in the scaffolds. The mechanical properties of the scaffolds changed by the adding content of HA. For the nanoscaffolds with 2wt % HA, the ultimate tensile strength and the elongation at break was 7.5 MPa and 17%. The PVA/HA nanoscaffolds prepared by electrospinning indicated good properties, and had a potential applications in bone tissue engineering and drug delivery systems.

scholarly journals Preparation and Characterization of HPMC/PVP Blend Films Plasticized with Sorbitol

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
H. Somashekarappa ◽  
Y. Prakash ◽  
K. Hemalatha ◽  
T. Demappa ◽  
R. Somashekar
Keyword(s):  
Mechanical Properties ◽  
Hydroxypropyl Methylcellulose ◽  
Solution Casting ◽  
Casting Method ◽  
Elongation At Break ◽  
X Ray ◽  
Blend Films ◽  
X Ray Scattering ◽  
Solution Casting Method

The aim of this present work is to investigate the effect of plasticizers like Sorbitol on microstructural and mechanical properties of hydroxypropyl methylcellulose (HPMC) and Polyvinylpyrrolidone (PVP) blend films. The pure blend and plasticized blend films were prepared by solution casting method and investigated using wide angle X-ray scattering (WAXS) method. WAXS analysis confirms that the plasticizers can enter into macromolecular blend structure and destroy the crystallinity of the films. FTIR spectra show that there are a shift and decrease in the intensity of the peaks confirming the interaction of plasticizer with the blend. Mechanical properties like tensile strength and Young’s Modulus decrease up to 0.6% of Sorbitol content in the films. Percentage of elongation at break increases suggesting that the plasticized films are more flexible than pure blend films. These films are suitable to be used as environmental friendly and biodegradable packaging films.

PHYSICO-MECHANICAL AND DYNAMIC MECHANICAL PROPERTIES OF META-PENTADECENYL PHENOL FUNCTIONALIZED ACRYLONITRILE–BUTADIENE RUBBER NANOCLAY COMPOSITES

2019 ◽  
Vol 92 (3) ◽  
pp. 496-512 ◽  
Author(s):  
Satyajit Samantarai ◽  
Ahindra Nag ◽  
Nitesh Singh ◽  
Debabrata Dash ◽  
Golok B. Nando ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dynamic Mechanical Properties ◽  
Dioctyl Phthalate ◽  
Butadiene Rubber ◽  
Limiting Oxygen Index ◽  
Elongation At Break ◽  
Acrylonitrile Butadiene Rubber ◽  
Aging Studies ◽  
Free Radical Initiator

ABSTRACT The physico-mechanical and thermo-mechanical properties of meta-pentadecenyl phenol (cardanol) functionalized acrylonitrile–butadiene rubber (CGNBR) composites containing sodium montmorillonite clay were determined via studies on the functionalization of NBR by grafting cardanol onto its backbone main chain in the latex stage using benzoyl peroxide as a free radical initiator. Results show an improvement in technical properties for functionalized NBR nanocomposites over the NBR nanocomposite. Air and ASTM 3 oil aging studies at 100 °C confirmed an increase in tensile strength and a decrease in elongation at break for CGNBR compared to the dioctyl phthalate plasticized NBR nanocomposite. Fire and flame retardancy studies showed an increased limiting oxygen index for functionalized NBR over the NBR nanoclay composite. Results delineate the method of preparation and characterization of functionalized NBR and oil plasticized NBR nanoclay composites to achieve an improved oil resistance effect for functionalized NBR over NBR nanocomposite.

Mechanical Properties of PLA/LLDPE Films Reinforced with Silica from Rice Husk

2014 ◽  
Vol 1025-1026 ◽  
pp. 221-226 ◽  
Author(s):  
Supavinee Sareeladdanon ◽  
Pranut Potiyaraj
Keyword(s):  
Mechanical Properties ◽  
Rice Husk ◽  
Tensile Testing ◽  
Tensile Modulus ◽  
Screw Extruder ◽  
Melt Mixing ◽  
Elongation At Break ◽  
Rice Husk Silica ◽  
Result Show ◽  
Twin Screw

Nanocomposite is one of the most favorable approaches to improve mechanical properties of polymers. This study prepared polymer composite of PLA and LLDPE with different amount of rice husk silica (0.5 and 1 wt%). The composites were prepared by melt-mixing in a twin-screw extruder and processed into film by a chill roll cast extruder. The mechanical properties were investigated through tensile testing and tear testing. The result show that the tensile modulus of PLA decreased with 1wt% rice husk silica. Similarly, tensile modulus of LLDPE dropped with the addition of silica. However, with the addition 0.5 and 1 wt% rice husk silica, the elongation at break of PLA and LLDPE composites increases significantly.

Preparation and Characterization of Rice Husk Powder Incorporated Natural Rubber Latex Foam

2012 ◽  
Vol 626 ◽  
pp. 523-529 ◽  
Author(s):  
Shamala Ramasamy ◽  
Hanafi Ismail ◽  
Yamuna Munusamy
Keyword(s):  
Tensile Strength ◽  
Natural Rubber ◽  
Rice Husk ◽  
Structural Characterization ◽  
Natural Rubber Latex ◽  
Filler Loading ◽  
Rubber Latex ◽  
Elongation At Break ◽  
Rice Milling

Rice husk powder (RHP) is an abundant agricultural by product that is produced in bulk quantity as part of rice milling. This research is carried out to incorporate RHP with natural rubber latex (NRL) compound. Different loading of RHP is added to NRL compound and is foamed to make natural rubber latex foam (NRLF) using a well known technique called the Dunlop method. The tensile properties of modified NRLF is studied and compared with the controlled NRLF which has zero RHP loading. The morphology and micro structural characterization has been performed by Tabletop microscopy (TM1000). The tensile strength decreases at 2.5 pphr but increases again as the filler loading increases. Elongation at break decreases whereas modulus at 100% elongation (M 100) and hardness increases as the filler loading increases.

scholarly journals Development and Characterization of Bacterial Cellulose Reinforced with Natural Rubber

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2323 ◽  
Author(s):  
Kornkamol Potivara ◽  
Muenduen Phisalaphong
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Bacterial Cellulose ◽  
Polar Solvents ◽  
High Mechanical Strength ◽  
Elongation At Break ◽  
Hydrocarbon Polymer ◽  
Structural Networks ◽  
Film Characteristics

Films of bacterial cellulose (BC) reinforced by natural rubber (NR) with remarkably high mechanical strength were developed by combining the prominent mechanical properties of multilayer BC nanofibrous structural networks and the high elastic hydrocarbon polymer of NR. BC pellicle was immersed in a diluted NR latex (NRL) suspension in the presence of ethanol aqueous solution. Effects of NRL concentrations (0.5%–10% dry rubber content, DRC) and immersion temperatures (30–70 °C) on the film characteristics were studied. It was revealed that the combination of nanocellulose fibrous networks and NR polymer provided a synergistic effect on the mechanical properties of NR–BC films. In comparison with BC films, the tensile strength and elongation at break of the NR–BC films were considerably improved ~4-fold. The NR–BC films also exhibited improved water resistance over that of BC films and possessed a high resistance to non-polar solvents such as toluene. NR–BC films were biodegradable and could be degraded completely within 5–6 weeks in soil.

Sign in / Sign up

Export Citation Format

Share Document