scholarly journals Adsorption Properties for La(III), Ce(III), and Y(III) with Poly(6-acryloylamino-hexyl hydroxamic acid) Resin

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 3
Author(s):  
Xiaoyan Cao ◽  
Chunjie Zhou ◽  
Shuai Wang ◽  
Ruilin Man
Keyword(s):  
Rare Earth ◽  
Hydroxamic Acid ◽  
Kinetic Studies ◽  
Rare Metal ◽  
Adsorption Properties ◽  
Rare Earth Ions ◽  
Chelating Resin ◽  
Infrared Spectrometry ◽  
Acid Resin ◽  
Pseudo Second Order

Using polyacrylic resin followed by the substitution reaction with 6-aminohexyl hydroxamic acid, poly(6-acryloylamino-hexyl hydroxamic acid) resin (PAMHA) was successfully synthesized. PAMHA, a spherical resin with the particle size of 0.4 mm, is a novel polyamide hydroxamic acid chelating resin containing acylamino and hydroxamic acid functional groups. A series of influences (pH, contact time, temperature, and the initial concentrations of rare earth ions) were investigated to determine the adsorption properties. The adsorption capacity for La(III), Ce(III), and Y(III) ions were 1.030, 0.962, and 1.450 mmol·g−1, respectively. Thermodynamic and kinetic studies were also carried out to show that the uptake of rare earth ions onto PAMHA fitted well the pseudo-second-order model and Langmuir isotherm, and the adsorption process was spontaneous endothermic. In addition, desorption of rare earth ions was achieved by using 2 mol·L−1 HNO3 and desorption efficiencies for La(III), Ce(III), and Y(III) ions were 98.4, 99.1, and 98.8%, respectively. Properties of PAMHA resin were characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometry (FTIR), and X-ray photoelectron spectrometer (XPS). The results showed that there was coordination between the rare earth ions with PAMHA and rare metal ions were chemically adsorbed on the surface of the PAMHA.

scholarly journals Preparation of a Novel Polystyrene-Poly(hydroxamic Acid) Copolymer and Its Adsorption Properties for Rare Earth Metal Ions

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1905 ◽  
Author(s):  
Xiaoyan Cao ◽  
Qing Wang ◽  
Shuai Wang ◽  
Ruilin Man
Keyword(s):  
Rare Earth ◽  
Metal Ions ◽  
Surface Area ◽  
Hydroxamic Acid ◽  
Earth Metal ◽  
Rare Metal ◽  
Rare Earth Ions ◽  
Area Measurement ◽  
Bet Surface Area ◽  
Acid Copolymer

In this study, a novel polystyrene-poly(hydroxamic acid) copolymer was synthesized as an effective adsorbent for the treatment of rare earth elements. Through the use of elemental analysis as well as FTIR, SEM, XPS, and Brunauer-Emmett-Teller (BET) surface area measurement, the synthesized polymer was found to have a specific surface area of 111.4 m2·g−1. The adsorption performances of rare metal ions were investigated under different pH levels, contact times, initial concentrations of rare earth ions, and temperatures. The adsorption equilibrium for La3+, Ce3+, and Y3+ onto a polystyrene-poly(hydroxamic acid) copolymer is described by the Langmuir model, which confirms the applicability of monolayer coverage of rare earth ions onto a polystyrene-poly(hydroxamic acid) copolymer. The amount of adsorption capacities for La3+, Ce3+, and Y3+ reached 1.27, 1.53, and 1.83 mmol·g−1 within four hours, respectively. The adsorption process was controlled by liquid film diffusion, particle diffusion, and chemical reaction simultaneously. The thermodynamic parameters, including the change of Gibbs free energy (∆G), the change of enthalpy (∆H), and the change of entropy (∆S), were determined. The results indicate that the adsorption of resins for La3+, Ce3+ and Y3+ was spontaneous and endothermic. The polymer was also used as a recyclable adsorbent by the desorption experiment.

Investigation of rare earth ions adsorption properties of PP-g-AA

2000 ◽  
Vol 76 (10) ◽  
pp. 1549-1553 ◽  
Author(s):  
Kun Lu ◽  
Hai-Lin Peng ◽  
Dai-Tao Chen ◽  
Nai Shi ◽  
Duan-Fu Xu
Keyword(s):  
Rare Earth ◽  
Adsorption Properties ◽  
Rare Earth Ions

Spectral-kinetic studies of SrAlF5 doped by trivalent rare-earth ions

2012 ◽  
Vol 285 (18) ◽  
pp. 3832-3836 ◽  
Author(s):  
A.N. Yunusova ◽  
M.A. Marisov ◽  
V.V. Semashko ◽  
L.A. Nurtdinova ◽  
S.L. Korableva
Keyword(s):  
Rare Earth ◽  
Kinetic Studies ◽  
Rare Earth Ions ◽  
Trivalent Rare Earth

Process of Salicylic Acid-Type Composite for Rare Earth Ions

2015 ◽  
Vol 814 ◽  
pp. 333-337
Author(s):  
Yu Yu Yao ◽  
Jing Liu ◽  
Yong Qiang Wu ◽  
Min Min Zheng ◽  
Chun Mei Tang
Keyword(s):  
Salicylic Acid ◽  
Rare Earth ◽  
Reaction Temperature ◽  
Ph Value ◽  
Adsorption Properties ◽  
Rare Earth Ions ◽  
Adsorption Ability ◽  
Acid Type ◽  
Type Composite ◽  
The Rare Earth

The chelation adsorption behavior of a salicylic acid-type composite ASA-PGMA/SiO2for rare earth ions of the rare earth ore mud leaching solution in Mianning was studied in the present work. The effect of the reaction temperature and medium pH on adsorption properties of the ASA-PGMA/SiO2particle was examined. The concentrations of REEs were determined by ICP-MS. The results showed that the ASA-PGMA/SiO2possessed strong chelation adsorption ability for rare earth ions. The reaction temperature was 50°C, the adsorption properties of the composite were the best and the adsorption rate of rare earth ions reached above 90%. In the pH range where the hydrolysis of rare earth ions was inhibited, an increase in the pH value of the medium strengthened the chelation adsorption ability of the ASA-PGMA/SiO2particle for rare earth ions. The rare earth ions desorption from the ASA-PGMA/SiO2particle is effective when using 0.2mol/L of hydrochloric acid solution as the eluent.

Preparation of Graphene Oxide/Chitosan Pellets and Their Adsorption Properties for Congo Red

2019 ◽  
Vol 18 (05) ◽  
pp. 1850030 ◽  
Author(s):  
Qiuju Du ◽  
Yanhui Li ◽  
Jiabin Li ◽  
Zhao Zhang ◽  
Bin Qiao ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Congo Red ◽  
Electrostatic Interactions ◽  
Kinetic Studies ◽  
Adsorption Properties ◽  
Batch Adsorption ◽  
Solution Ph ◽  
Freundlich Model ◽  
Adsorption Data ◽  
Pseudo Second Order

A facile and easily separated adsorbent, graphene oxide (GO) pellets wrapped by chitosan (GOP) were prepared. Batch adsorption studies were carried out to study the adsorption properties of congo red onto GOP by varying the experimental parameters such as the contact time, the initial concentration of congo red, the solution pH, the adsorbent dose, and the temperature. The kinetic studies showed that the adsorption data fitted a pseudo-second-order model well. The isotherm analysis showed that the adsorption data fitted the Freundlich model well. The adsorption mechanism was mainly attributed to electrostatic interactions, [Formula: see text]–[Formula: see text] stacking interaction, hydrogen bond, and van der Waals force. Thermodynamic studies indicated that the adsorption process was endothermic and spontaneous.

scholarly journals Characterization of Waste Amidoxime Chelating Resin and Its Reutilization Performance in Adsorption of Pb(II), Cu(II), Cd(II) and Zn(II) Ions

Metals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 149
Author(s):  
Chunhui Zheng ◽  
Chunlin He ◽  
Yingjie Yang ◽  
Toyohisa Fujita ◽  
Guifang Wang ◽  
...  
Keyword(s):  
Metal Ions ◽  
Photoelectron Spectroscopy ◽  
Kinetic Studies ◽  
Chelating Resin ◽  
Order Kinetic ◽  
Market Demand ◽  
Solution Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The continuous expansion of the market demand and scale of commercial amidoxime chelating resins has caused large amounts of resin to be discarded around the world. In this study, the waste amidoxime chelating resin was reutilized as an adsorbent for the removal and recovery of Pb(II), Cu(II), Cd(II) and Zn(II) ions from aqueous solutions. The physical morphology and chemical composition of the waste amidoxime chelating resin (WAC-resin) from the factory was characterized by the elemental analyzer, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The influence of the initial metal ions concentration, contact time, temperature and the solution pH on the adsorption performance of the metal ions was explored by batch experiments. It was shown that the optimal pH was 4. Kinetic studies revealed that adsorption process corresponded with the pseudo-second-order kinetic model and the adsorption isotherm was consistent with the Langmuir model. At room temperature, the adsorption capacities of WAC-resin for Pb2+, Cu2+, Zn2+ and Cd2+ reached 114.6, 93.4, 24.4 and 20.7 mg/g, respectively.

Characterization of Rare-Earth Fluoride Anti-Stokes Phosphors by Scanning arid Transmission Electron Microscopy

1971 ◽  
Vol 29 ◽  
pp. 142-143
Author(s):  
N. M. P. Low ◽  
L. E. Brosselard
Keyword(s):  
Electron Microscopy ◽  
Rare Earth ◽  
Elevated Temperatures ◽  
Stoichiometric Composition ◽  
Rare Earth Ions ◽  
Crystalline Solid ◽  
Precipitation Process ◽  
Rare Earth Fluoride ◽  
Earth Fluoride ◽  
Rare Earth Fluorides

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.

Sign in / Sign up

Export Citation Format

Share Document