scholarly journals Traditional Sensory Evaluation and Bionic Electronic Nose as Innovative Tools for the Packaging Performance Evaluation of Chitosan Film

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2310
Author(s):  
Wei Song ◽  
Jian Xu ◽  
Lili Ren ◽  
Li Guo ◽  
Jin Tong ◽  
...  
Keyword(s):  
Sensory Evaluation ◽  
Electronic Nose ◽  
Food Packaging ◽  
Antibacterial Properties ◽  
Chitosan Film ◽  
Ground Beef ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Chitosan Concentration ◽  
Color Differences

Inspired by the natural epidermis of animals and plants with antioxidant and antibacterial properties, the aim of this research was to characterize and analyze the effects of the chitosan concentrations on properties of glycerol plasticized chitosan (GPC) film and to investigate the suitability of sensory evaluation and bionic electronic nose (b-electronic nose) detection to assess the freshness of ground beef packaged in the GPC film. The increase in chitosan concentration resulted in an increase in solubility value, total color differences and color intensity of chitosan films. The water vapor permeability (WVP) of the GPC films decreased with the increasing of the chitosan concentration and then increased at higher chitosan concentrations. Longer storage time led to poorer freshness of the ground beef and the GPC film could keep beef samples fresher and delay the deterioration of the beef. Both the traditional sensory evaluation and b-electronic nose technology were fit for evaluating the quality and shelf-life of ground beef, which could advantageously be applied in the future for analyzing other bionic food packaging materials.

scholarly journals Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2569
Author(s):  
Mia Kurek ◽  
Nasreddine Benbettaieb ◽  
Mario Ščetar ◽  
Eliot Chaudy ◽  
Maja Repajić ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Color Change ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Color Changes ◽  
Insoluble Particles ◽  
Polymer Stability ◽  
Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

Conducting/biodegradable chitosan-polyaniline film; Antioxidant, color, solubility and water vapor permeability properties

2021 ◽  
Vol 20 (2) ◽  
pp. 133-147
Author(s):  
Sajad Pirsa ◽  
Behzad Mohammadi
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Light Transmission ◽  
Antioxidant Properties ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Surface Color ◽  
Synthesis Time

In this study, chitosan-polyaniline nanocomposite film was prepared in combination with different concentrations of polyaniline at various synthesis times. Surface morphology, antioxidant properties, water solubility, water vapor permeability (WVP), color properties and light transparency properties of the films were investigated. The size, shape and morphology of the synthesized particles were examined with scanning electron microscopy (SEM) technique. The results indicated that the synthesized polyaniline particles were spherical and in the range of 45–70 nm. The results obtained from the study of the effect of polyaniline on the physical properties of the chitosan film showed that increasing polyaniline concentration and synthesis time causes a decrease in the rate of the water solubility and water vapor permeability. This is an important factor in expanding its use in food packaging. The results of the colorimetric studies showed that the polyaniline sharply changed the surface color of the film. Polyaniline also increased antioxidant properties of composite film. Investigating the light transmission and transparency of the films showed that the polyaniline reduced the transparency and transmission of light, which could be used to package products that are susceptible to oxidation in the light.

scholarly journals Development of shrimp-based chitosan film and assessment of its mechanical, barrier and antimicrobial properties

2020 ◽  
Vol 170 ◽  
pp. 04003
Author(s):  
Jagruti Jankar ◽  
Yogesh Nagargoje ◽  
Yogita Chavan ◽  
Jaydevi Jankar ◽  
Akshay Kumar Sahoo
Keyword(s):  
Food Packaging ◽  
Antimicrobial Properties ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Biodegradable Films ◽  
Percent Elongation ◽  
Maximum Resistance ◽  
Cent Concentration ◽  
Mechanical Barrier

You Utilization of biodegradable films is a need of food packaging industries in order to reduce the hazards related to plastic use and to extend the food’s shelf life. Various polysaccharides are in use for the purpose of making the films. In this research, chitosan based films were developed and its mechanical, barrier and antimicrobial properties were checked to fulfill the packaging requirements. Chitosan was extracted from shrimp waste and films were produced using 0.5-2 per cent concentrations. At ambient temperature, specific characteristics such as mechanical, barrier, and antimicrobial analysis were performed at an interval of two days. Among all, the films with 2 per cent chitosan showed best results in terms of tensile strength, thickness and percent elongation. Also, the films exhibited maximum resistance to water vapor permeability. The extracted chitosan at 2 per cent concentration had shown the maximum resistance against Staphylococcus aureus and Pseudomonas aeruginosa. From the current investigation it can be said that films with 2 per cent chitosan could be used as biodegradable food packing materials and can serve as material which would maintain a good city and future of world by minimizing plastic hazards..

scholarly journals Physico-Mechanical and Antibacterial Properties of PLA/TiO2 Composite Materials Synthesized via Electrospinning and Solution Casting Processes

Coatings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 525 ◽  
Author(s):  
Shiyi Feng ◽  
Feng Zhang ◽  
Saeed Ahmed ◽  
Yaowen Liu
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Antibacterial Properties ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Solution Casting ◽  
Water Contact ◽  
E Coli ◽  
Composites Materials

In this study, PLA/TiO2 composites materials were prepared via electrospinning and solution casting processes. By testing the mechanical properties, water contact angle, water vapor permeability, and solubility of the composite nanofibers and films, the comprehensive performances of the two types of nanocomposites were analyzed. The results show that maximum tensile strengths of 2.71 ± 0.11 MPa and 14.49 ± 0.13 MPa were achieved for the nanofibers and films at a TiO2 content of 0.75 wt.%. Moreover, the addition of TiO2 significantly cut down the water vapor transmittance rate of the nanofibers and films while significantly improving the water solubility. Further, the antibacterial activity increased under UV-A irradiation for a TiO2 nanoparticle content of 0.75 wt.%, and the nanofiber and films exhibited inhibition zones of 4.86 ± 0.50 and 3.69 ± 0.40 mm for E. coli, and 5.98 ± 0.77 and 4.63 ± 0.45 mm for S. aureus, respectively. Overall, the performance of the nanofiber was better than that of the film. Nevertheless, both the nanocomposite membranes satisfied the requirements of food packaging materials.

scholarly journals Physical and Antibacterial Properties of Sodium Alginate—Sodium Carboxymethylcellulose Films Containing Lactococcus lactis

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2645 ◽  
Author(s):  
Jingsong Ye ◽  
Donghui Ma ◽  
Wen Qin ◽  
Yaowen Liu
Keyword(s):  
Staphylococcus Aureus ◽  
Sodium Alginate ◽  
Lactococcus Lactis ◽  
Food Packaging ◽  
Antibacterial Properties ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Vapor Permeability ◽  
Bacterial Cells ◽  
Sodium Carboxymethylcellulose

Edible films have gradually become a research focus for food packaging materials due to a variety of benefits, including environmental friendliness, good barrier properties, and good carrying capacity. In this experimental study, we used sodium alginate as a film-forming substrate, sodium carboxymethylcellulose as a modifier, and glycerol as a plasticizer, then Lactococcus lactis was added to film solutions to form bacteriostatic films via the tape casting method. With the addition of Lactococcus lactis, the films did not significantly change thickness, while the transparency decreased and a significant increase in red and yellow hues was observed. Meanwhile, the dispersion of bacterial cells in film solutions destroyed intermolecular interactions in the solutions during film formation and increased the volume of voids in the Lactococcus lactis-containing films, thereby slightly decreasing the tensile strength of the films, but significantly increasing water vapor permeability. Moreover, the films with added Lactococcus lactis showed significant bacteriostatic activity against Staphylococcus aureus at 4 °C. In a seven-day bacteriostatic test, the films with Lactococcus lactis added at a level of 1.5 g/100 g resulted in a decrease in the viable cell count of Staphylococcus aureus by at least four logarithmic units. This study of Lactococcus lactis-containing films has provided a new method and strategy for antibacterial preservation of foods.

scholarly journals The effect of plasticizers and chitosan concentration on the structure and properties of Gracilaria sp.-based thin films for food packaging purpose

Polimery ◽  
2021 ◽  
Vol 66 (2) ◽  
Author(s):  
M. Zulham Efendi Sinaga ◽  
Saharman Gea ◽  
Cut Fatimah Zuhra ◽  
Yuan Alfinsyah Sihombing ◽  
Emma Zaidar ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Mechanical Properties ◽  
Food Packaging ◽  
Antimicrobial Properties ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Chitosan Concentration ◽  
Active Food Packaging ◽  
Ft Ir

Gracilaria sp. is well known as one kind of species of red algae. The major component of polysaccharide in this alga is agar that mostly used for making thin film. In this study, the Gracilaria sp.-based thin film had been prepared using two plasticizers (glycerol and sorbitol, 0.1, 0.2, and 0.3 wt %), and chitosan (1, 2, and 3 wt %). The FT-IR analysis confirmed the interaction that happened among the component of the mixture of Gracilaria sp., plasticizers, and chitosan was based on hydrogen bonding due to the presence of -OH and -NH2 groups. The plasticizers and chitosan concentration have significant role to the mechanical properties of Gracilaria sp.-based thin film. The optimum concentration of plasticizers and chitosan based on mechanical testing result was found at 0.2 and 3.0 wt %, respectively. At those concentrations, the thin film that prepared with sorbitol showed the highest mechanical properties. Other characterizations, i.e. TGA (Thermogravimetric Analysis), SEM (Scanning Electron Microscopy), and WVP (Water Vapor Permeability) also brought the same result. The antimicrobial properties of the as prepared thin film in the presence of chitosan on agar medium and as a packaging on selected bread showed the Gracilaria sp.-based thin films was able to inhibit the growth of microbes. This antimicrobial activity can be used to declare the potential of Gracilaria sp.-based thin film as a new active food packaging.

scholarly journals Edible Chitosan Films and Their Nanosized Counterparts Exhibit Antimicrobial Activity and Enhanced Mechanical and Barrier Properties

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 127 ◽  
Author(s):  
Laidson Gomes ◽  
Hiléia Souza ◽  
José Campiña ◽  
Cristina Andrade ◽  
António Silva ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Food Packaging ◽  
Water Solubility ◽  
Chitosan Nanoparticles ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Blend Films ◽  
Color Changes

Chitosan and chitosan-nanoparticles were combined to prepare biobased and unplasticized film blends displaying antimicrobial activity. Nanosized chitosans obtained by sonication for 5, 15, or 30 min were combined with chitosan at 3:7, 1:1, and 7:3 ratios, in order to adjust blend film mechanical properties and permeability. The incorporation of nanosized chitosans led to improvements in the interfacial interaction with chitosan microfibers, positively affecting film mechanical strength and stiffness, evidenced by scanning electron microscopy. Nanosized or blend chitosan film sensitivity to moisture was significantly decreased with the drop in biocomposite molecular masses, evidenced by increased water solubility and decreased water vapor permeability. Nanosized and chitosan interactions gave rise to light biobased films presenting discrete opacity and color changes, since red-green and yellow-blue colorations were affected. All chitosan blend films exhibited antimicrobial activity against both Gram-positive and Gram-negative bacteria. The performance of green unplasticized chitosan blend films displaying diverse morphologies has, thus, been proven as a potential step towards the design of nontoxic food packaging biobased films, protecting against spoilage microorganisms, while also minimizing environmental impacts.

Physical Properties and Antibacterial Activity of a Chitosan Film Incorporated with Lavender Essential Oil

2013 ◽  
Vol 706-708 ◽  
pp. 197-200 ◽  
Author(s):  
Zhi Hong Zhang ◽  
Yu Yue Qin ◽  
Jian Fan ◽  
Tian Rui Zhao ◽  
Chun Sheng Cheng
Keyword(s):  
Mechanical Property ◽  
Antibacterial Activity ◽  
Water Vapor ◽  
Essential Oil ◽  
Food Packaging ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Active Food Packaging ◽  
The Impact

Chitosan-based films containing lavender essential oil (LEO) (0, 0.5%, 1.0%, 1.5% (v/v)) were prepared to evaluate their physical and antibacterial activities. In order to study the impact of the incorporation of LEO into chitosan matrix, the solubility, mechanical property, water vapor permeability, and antibacterial activity of the films were investigated. Fourier transform infrared chromatography (FTIR) was carried out to explain structure–property relationships. Results showed that the solubility and water vapor permeability of the chitosan-based film decreased by LEO incorporation. Films containing LEO showed better mechanical property. FTIR spectra demonstrated good interaction between functional groups of chitosan with LEO. With the concentration of LEO increased from 0 to 1.5 %, the inhibitory zone of four bacterial strains (Escherichia coli, Staphylococcus aurous, Bacillus magaterium, Bacillus subtilis) increased. It can be concluded that chitosan films containing LEO can be used for development of active food packaging materials.

scholarly journals Protein-Based Films and Coatings for Food Industry Applications

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 769
Author(s):  
Vlad Mihalca ◽  
Andreea Diana Kerezsi ◽  
Achim Weber ◽  
Carmen Gruber-Traub ◽  
Jürgen Schmucker ◽  
...  
Keyword(s):  
Food Packaging ◽  
Meat Products ◽  
Water Vapor Permeability ◽  
Food Product ◽  
Edible Films ◽  
Vapor Permeability ◽  
Area Of Interest ◽  
Industry Applications ◽  
Economic Perspectives ◽  
Materials Used

Food packaging is an area of interest not just for food producers or food marketing, but also for consumers who are more and more aware about the fact that food packaging has a great impact on food product quality and on the environment. The most used materials for the packaging of food are plastic, glass, metal, and paper. Still, over time edible films have become widely used for a variety of different products and different food categories such as meat products, vegetables, or dairy products. For example, proteins are excellent materials used for obtaining edible or non-edible coatings and films. The scope of this review is to overview the literature on protein utilization in food packages and edible packages, their functionalization, antioxidant, antimicrobial and antifungal activities, and economic perspectives. Different vegetable (corn, soy, mung bean, pea, grass pea, wild and Pasankalla quinoa, bitter vetch) and animal (whey, casein, keratin, collagen, gelatin, surimi, egg white) protein sources are discussed. Mechanical properties, thickness, moisture content, water vapor permeability, sensorial properties, and suitability for the environment also have a significant impact on protein-based packages utilization.

Mechanical and antibacterial properties of ZnO/chitosan bio-composite films

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ayse Kalemtas ◽  
Hasan B. Kocer ◽  
Ahmet Aydin ◽  
Pinar Terzioglu ◽  
Gulsum Aydin
Keyword(s):  
Particle Size ◽  
Food Packaging ◽  
Mechanical Test ◽  
Composite Films ◽  
Antibacterial Properties ◽  
Chitosan Film ◽  
Antibacterial Activities ◽  
Diffusion Method ◽  
Zno Powders ◽  
Solution Casting Method

Abstract In the current study, ZnO/chitosan bio-composite films were produced via solution-casting method. Two different ZnO powders, micrometer (d50 ≅ 1.5 μm) and nanometer sized (d50 ≅ 100 nm), were used to investigate the effect of ZnO particle size and concentration (0, 2, and 8% w/w of chitosan) on the mechanical and antibacterial properties of the ZnO/chitosan bio-composite films. The incorporation of the ZnO powders into the chitosan film resulted in an increase in the tensile strength (TS) and a decrease in the elongation at break (EB) values. Mechanical test results revealed that TS and EB properties were considerably affected (p < 0.05) by the concentration and particle size of the ZnO reinforcement. Disc diffusion method demonstrated good antibacterial activities of bio-composite films containing high amount of ZnO (8% w/w of chitosan) against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Bacillus subtilis. The growth-limiting effect of the films was more pronounced for S. aureus and K. pneumoniae. Due to enhanced TS and imparted antibacterial activity of the produced ZnO/chitosan bio-composite films, these materials are promising candidates for applications such as food packaging, wound dressing, and antibacterial coatings for various surfaces.

Sign in / Sign up

Export Citation Format

Share Document