scholarly journals Core−Shell Molecularly Imprinted Polymers on Magnetic Yeast for the Removal of Sulfamethoxazole from Water

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1385 ◽  
Author(s):  
Liang Qiu ◽  
Guilaine Jaria ◽  
María Victoria Gil ◽  
Jundong Feng ◽  
Yaodong Dai ◽  
...  
Keyword(s):  
Molecularly Imprinted Polymers ◽  
Selective Adsorption ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Step Method ◽  
Molecularly Imprinted ◽  
Imprinted Polymers ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Sorbent Materials

In this work, magnetic yeast (MY) was produced through an in situ one-step method. Then, MY was used as the core and the antibiotic sulfamethoxazole (SMX) as the template to produce highly selective magnetic yeast-molecularly imprinted polymers (MY@MIPs). The physicochemical properties of MY@MIPs were assessed by Fourier-transform infrared spectroscopy (FT-IR), a vibrating sample magnetometer (VSM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), specific surface area (SBET) determination, and scanning electron microscopy (SEM). Batch adsorption experiments were carried out to compare MY@MIPs with MY and MY@NIPs (magnetic yeast-molecularly imprinted polymers without template), with MY@MIPs showing a better performance in the removal of SMX from water. Adsorption of SMX onto MY@MIPs was described by the pseudo-second-order kinetic model and the Langmuir isotherm, with maximum adsorption capacities of 77 and 24 mg g−1 from ultrapure and wastewater, respectively. Furthermore, MY@MIPs displayed a highly selective adsorption toward SMX in the presence of other pharmaceuticals, namely diclofenac (DCF) and carbamazepine (CBZ). Finally, regeneration experiments showed that SMX adsorption decreased 21 and 34% after the first and second regeneration cycles, respectively. This work demonstrates that MY@MIPs are promising sorbent materials for the selective removal of SMX from wastewater.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

Molecularly Imprinted Polymers for Selective Adsorption of Cholesterol from Aqueous Environment

e-Polymers ◽  
2007 ◽  
Vol 7 (1) ◽  
Author(s):  
Francesco Puoci ◽  
Francesca Iemma ◽  
Giuseppe Cirillo ◽  
Sonia Trombino ◽  
Roberta Cassano ◽  
...  
Keyword(s):  
Molecularly Imprinted Polymers ◽  
Selective Adsorption ◽  
Aqueous Media ◽  
Aqueous Environment ◽  
Polar Solvents ◽  
Molecularly Imprinted ◽  
Imprinted Polymers ◽  
Bond Forming ◽  
Preparation And Evaluation ◽  
Templating Effect

AbstractIn this work the preparation and evaluation of molecularly imprinted polymers (MIPs) based on 2-hydroxyethylmetacrylate (HEMA) for selective recovery of cholesterol from aqueous media are reported. HEMA was used as functional monomer in order to maximize the hydrogen bond forming both in prepolymerization complex and in rebinding experiments which were performed in polar solvents; in particular, an acetonitrile:water (7:3 v/v) mixture was employed. The templating effect is clearly seen in the capacity of the synthesized polymers to bind cholesterol, and their selectivity was evaluated using two steroids quite similar to cholesterol such as progesterone and hydrocortisone which are less effectively bound by the matrices.

Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48

2011 ◽  
Vol 413 ◽  
pp. 148-153 ◽  
Author(s):  
Xue Na Hu ◽  
Ya Han ◽  
Jia Yan Li ◽  
Jun Yan Wu ◽  
Jian Rong Chen ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene ◽  
Poly Propylene

Thiol-functionalized MCM-48 (SH-MCM-48) was synthesized by co-condensation method, with co-templates of cetyltrimethylammonium bromide (CTAB) and nonionic poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) triblock copolymer (Pluronic P123). The resulting material was characterized by XRD and FT-IR spectrum. The potential of SH-MCM-48 for adsorption Zn (II) from aqueous solution was examined. Batch adsorption studies were carried out to investigate the effect of experimental parameters including pH, metal ions concentration and adsorption time. The maximum adsorption capacities of Zn (II) onto SH-MCM-48 were 30.12, 34.01 and 38.02 mg g-1 at the temperature of 303, 313 and 323K, respectively. The adsorption kinetics data were found to follow the pseudo-second-order kinetic model, and adsorption isotherms were fitted well with Langmuir and Freundlich models. Moreover, the adsorption thermodynamic parameters (△G0, △H0 and △S0) were measured, and indicated that the adsorption was an exothermic and spontaneous process.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

scholarly journals Molecularly Imprinted Polymers for Gossypol via Sol–Gel, Bulk, and Surface Layer Imprinting—A Comparative Study

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 602 ◽  
Author(s):  
Lulu Wang ◽  
Keke Zhi ◽  
Yagang Zhang ◽  
Yanxia Liu ◽  
Letao Zhang ◽  
...  
Keyword(s):  
Surface Layer ◽  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Molecularly Imprinted Polymers ◽  
Sol Gel ◽  
Freundlich Isotherm ◽  
Bulk Polymerization ◽  
Order Kinetic ◽  
Molecularly Imprinted ◽  
Imprinted Polymers

Three gossypol molecularly imprinted polymers (MIPs) were prepared by bulk polymerization (MIP1), surface layer imprinting using silica gel as the support (MIP2), and the sol-gel process (MIP3). The as-prepared MIPs were characterized by SEM and nitrogen adsorption−desorption techniques to study the morphology structure. The adsorption experiments exhibited that MIP1 had adsorption capacity as high as 564 mg·g−1. The MIP2 showed faster adsorption kinetics than MIP1 and MIP3. The adsorption equilibrium could be reached for gossypol in 40 min. A selectivity study showed that the adsorption capacity of MIPs for gossypol was about 1.9 times higher than that of the structurally-similar analogs ellagic acid and 6.6 times higher than that of the quercetin. It was found that the pseudo-second-order kinetic model and the Freundlich isotherm model were more applicable for the adsorption kinetics and adsorption isotherm of gossypol binding onto the MIP1 and MIP2, respectively. Results suggested that among those three, the MIP2 was a desirable sorbent for rapid adsorption and MIP1 was suitable for selective recognition of gossypol.

Synthesis of porous molecularly imprinted polymers for selective adsorption of glutathione

2015 ◽  
Vol 332 ◽  
pp. 159-166 ◽  
Author(s):  
Renyuan Song ◽  
Xiaoling Hu ◽  
Ping Guan ◽  
Ji Li ◽  
Liwei Qian ◽  
...  
Keyword(s):  
Molecularly Imprinted Polymers ◽  
Selective Adsorption ◽  
Molecularly Imprinted ◽  
Imprinted Polymers

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Adsorption Removal of Copper and Nickel Ions from Wastewater by Ammonia Modified Cotton Stalks

2014 ◽  
Vol 955-959 ◽  
pp. 2440-2443 ◽  
Author(s):  
Jing Li ◽  
Dong Mei Jia ◽  
Chang Hai Li ◽  
Bao Qing Yu
Keyword(s):  
Copper Ions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Optimum Conditions ◽  
Nickel Ions ◽  
Adsorption Removal ◽  
Cotton Stalks ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The ammonia modified cotton stalks (CS) were utilized to adsorb the Ni2+and Cu2+ions from wastewaters, and the effect parameters (i.e. pH, contact time, adsorbent dose, and temperature) were also investigated by batch adsorption experiments. The maximum uptake was attained, i.e., 99.4% and 98.8%, respectively, for nickel and copper ions, under the optimum conditions (adsorbent dose: 10 g/L; pH: 6.0 (Ni2+), 5.0 (Cu2+); t: 75min; T: 20 °C) when the initial concentration of heavy metal ions was 20 mg/L. The adsorption process of nickel and copper ions on ammonia modified CS was well described by the pseudo-second-order kinetic model.

Water-compatible surface molecularly imprinted polymers with synergy of bi-functional monomers for enhanced selective adsorption of bisphenol A from aqueous solution

2016 ◽  
Vol 3 (1) ◽  
pp. 213-222 ◽  
Author(s):  
Feifei Duan ◽  
Chaoqiu Chen ◽  
Xiaofeng Zhao ◽  
Yongzhen Yang ◽  
Xuguang Liu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Bisphenol A ◽  
Molecularly Imprinted Polymers ◽  
Selective Adsorption ◽  
Aqueous Media ◽  
Selective Removal ◽  
Molecularly Imprinted ◽  
Functional Monomers ◽  
Imprinted Polymers ◽  
Adsorption Performance

Water-compatible surface molecularly imprinted polymers were synthesized via bi-functional monomers and exhibited excellent adsorption performance for the selective removal of BPA from aqueous media.

Sign in / Sign up

Export Citation Format

Share Document