scholarly journals Coupling Microfluidics Data with Core Flooding Experiments to Understand Sulfonated/Polymer Water Injection

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1227 ◽  
Author(s):  
Muhammad Tahir ◽  
Rafael E. Hincapie ◽  
Nils Langanke ◽  
Leonhard Ganzer ◽  
Philip Jaeger
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Wettability Alteration ◽  
Core Flooding ◽  
Rheological Characterization ◽  
Two Phase ◽  
Key Recovery ◽  
Low Salt ◽  
Polymer Flood ◽  
Recovery Mechanisms

The injection of sulfonated-modified water could be an attractive application as it results in the formation of a mechanically rigid oil-water interface, and hence, possible higher oil recovery in combination with polymer. Therefore, detailed experimental investigation and fluid-flow analysis into porous media are required to understand the possible recovery mechanisms taking place. This paper evaluates the potential influence of low-salt/sulfate-modified water injection in oil recovery using a cross-analyzed approach of coupled microfluidics data and core flooding experiments. Fluid characterization was achieved by detailed rheological characterization focusing on steady shear and in-situ viscosity. Moreover, single and two-phase micromodels and core floods experiments helped to define the behavior of different fluids. Overall, coupling microfluidics, with core flooding experiments, confirmed that fluid-fluid interfacial interaction and wettability alteration are both the key recovery mechanisms for modified-water/low-salt. Finally, a combination of sulfate-modified/low-salinity water, with polymer flood can lead to ~6% extra oil, compared to the combination of polymer flood with synthetic seawater (SSW). The results present an excellent way to make use of micromodels and core experiments as a supporting tool for EOR processes evaluations, assessing fluid-fluid and rock-fluid interactions.

scholarly journals Numerical modeling and experimental investigation on the effect of low-salinity water flooding for enhanced oil recovery in carbonate reservoirs

2021 ◽  
Vol 11 (2) ◽  
pp. 925-947
Author(s):  
Erfan Hosseini ◽  
Mohammad Sarmadivaleh ◽  
Dana Mohammadnazar
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Experimental Investigations ◽  
Core Flooding ◽  
Reservoir Temperature ◽  
Sulfate Ion ◽  
Ionic Content ◽  
Low Salinity

AbstractNumerous studies concluded that water injection with modified ionic content/salinity in sandstones would enhance the oil recovery factor due to some mechanisms. However, the effects of smart water on carbonated formations are still indeterminate due to a lack of experimental investigations and researches. This study investigates the effects of low-salinity (Low Sal) solutions and its ionic content on interfacial tension (IFT) reduction in one of the southwestern Iranian carbonated reservoirs. A set of organized tests are designed and performed to find each ion’s effects and total dissolved solids (TDS) on the candidate carbonated reservoir. A sequence of wettability and IFT (at reservoir temperature) tests are performed to observe the effects of controlling ions (sulfate, magnesium, calcium, and sodium) and different salinities on the main mechanisms (i.e., wettability alteration and IFT reduction). All IFT tests are performed at reservoir temperature (198 °F) to minimize the difference between reservoir and laboratory-observed alterations. In this paper, the effects of four different ions (SO42-, Ca2+, Mg2+, Na+) and total salinity TDS (40,000, 20,000, 5000 ppm) are investigated. From all obtained results, the best two conditions are applied in core flooding tests to obtain the relative permeability alterations using unsteady-state methods and Cydarex software. The final part is the simulation of the whole process using the Schlumberger Eclipse black oil simulator (E100, Ver. 2010) on the candidate reservoir sector. To conclude, at Low Sal (i.e., 5000 ppm), the sulfate ion increases sulfate concentration lower IFT, while in higher salinities, increasing sulfate ion increases IFT. Also, increasing calcium concentration at high TDS (i.e., 40,000 ppm) decreases the amount of wettability alteration. In comparison, in lower TDS values (20,000 and 5000 ppm), calcium shows a positive effect, and its concentration enhanced the alteration process. Using Low Sal solutions at water cut equal or below 10% lowers recovery rate during simulations while lowering the ultimate recovery of less than 5%.

scholarly journals Simulation of two-phase flow by injecting water and surfactant into porous media containing oil and investigation of trapped oil areas

2021 ◽  
Vol 11 (3) ◽  
pp. 1353-1362
Author(s):  
Seyed Mousa Sajadi ◽  
Saeid Jamshidi ◽  
Meisam Kamalipoor
Keyword(s):  
Porous Media ◽  
Oil Recovery ◽  
Water Injection ◽  
Sodium Dodecyl ◽  
Recovery Factor ◽  
Wettability Alteration ◽  
Two Phase ◽  
Synthetic Process ◽  
Narrow Channels ◽  
Dynamics Method

AbstractNowadays, as the oil reservoirs reaching their half-life, using enhanced oil recovery methods is more necessary and more common. Simulations are the synthetic process of real systems. In this study, simulation of water and surfactant injection into a porous media containing oil (two-phase) was performed using the computational fluid dynamics method on the image of a real micro-model. Also, the selected anionic surfactant is sodium dodecyl sulfate, which is more effective in sand reservoirs. The effect of using surfactant depends on its concentration. This dependence on concentration in using injection compounds is referred to as critical micelle concentration (CMC). In this study, an injection concentration (inlet boundary) of 1000 ppm was considered as a concentration less than the CMC point (2365 ppm). This range of surfactant concentrations after 4.5 ms increased the porous media recovery factor by 2.21%. Surfactant injection results showed the wettability alteration and IFT finally increases the recovery factor in comparison with water injection. Also, in wide channels, saturation front, and narrow channels, the concentration front has a great effect on the main flowing.

scholarly journals Experimental study of the performances of commercial surfactants in reducing interfacial tension and wettability alteration in the process of chemical water injection into carbonate reservoirs

2019 ◽  
Vol 10 (4) ◽  
pp. 1551-1563 ◽  
Author(s):  
Siamak Najimi ◽  
Iman Nowrouzi ◽  
Abbas Khaksar Manshad ◽  
Amir H. Mohammadi
Keyword(s):  
Contact Angle ◽  
Interfacial Tension ◽  
Oil Recovery ◽  
Saline Water ◽  
Water Injection ◽  
Reservoir Rock ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Core Flooding ◽  
Chemical Water

Abstract Surfactants are used in the process of chemical water injection to reduce interfacial tension of water and oil and consequently decrease the capillary pressure in the reservoir. However, other mechanisms such as altering the wettability of the reservoir rock, creating foam and forming a stable emulsion are also other mechanisms of the surfactants flooding. In this study, the effects of three commercially available surfactants, namely AN-120, NX-1510 and TR-880, in different concentrations on interfacial tension of water and oil, the wettability of the reservoir rock and, ultimately, the increase in oil recovery based on pendant drop experiments, contact angle and carbonate core flooding have been investigated. The effects of concentration, temperature, pressure and salinity on the performances of these surfactants have also been shown. The results, in addition to confirming the capability of the surfactants to reduce interfacial tension and altering the wettability to hydrophilicity, show that the TR-880 has the better ability to reduce interfacial tension than AN-120 and NX-1510, and in the alteration of wettability the smallest contact angle was obtained by dissolving 1000 ppm of surfactant NX-1510. Also, the results of interfacial tension tests confirm the better performances of these surfactants in formation salinity and high salinity. Additionally, a total of 72% recovery was achieved with a secondary saline water flooding and flooding with a 1000 ppm of TR-880 surfactant.

Carbonated Water Injection for Recovery of Oil and Wettability Analysis

2014 ◽  
Vol 695 ◽  
pp. 499-502 ◽  
Author(s):  
Mohamad Faizul Mat Ali ◽  
Radzuan Junin ◽  
Nor Hidayah Md Aziz ◽  
Adibah Salleh
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Promising Result ◽  
Water Injection ◽  
High Mobility ◽  
Wettability Alteration ◽  
Sweep Efficiency ◽  
Gas Flooding ◽  
Carbonated Water Injection ◽  
Carbonated Water

Malaysia oilfield especially in Malay basin has currently show sign of maturity phase which involving high water-cut and also pressure declining. In recent event, Malaysia through Petroliam Nasional Berhad (PETRONAS) will be first implemented an enhanced oil recovery (EOR) project at the Tapis oilfield and is scheduled to start operations in 2014. In this project, techniques utilizing water-alternating-gas (WAG) injection which is a type of gas flooding method in EOR are expected to improve oil recovery to the field. However, application of gas flooding in EOR process has a few flaws which including poor sweep efficiency due to high mobility ratio of oil and gas that promotes an early breakthrough. Therefore, a concept of carbonated water injection (CWI) in which utilizing CO2, has ability to dissolve in water prior to injection was applied. This study is carried out to assess the suitability of CWI to be implemented in improving oil recovery in simulated sandstone reservoir. A series of displacement test to investigate the range of recovery improvement at different CO2 concentrations was carried out with different recovery mode stages. Wettability alteration properties of CWI also become one of the focuses of the study. The outcome of this study has shown a promising result in recovered residual oil by alternating the wettability characteristic of porous media becomes more water-wet.

scholarly journals Numerical Simulation of Two-Phase Flows in Heterogeneous Porous Media

2020 ◽  
Vol 21 (2) ◽  
pp. 339
Author(s):  
I. Carneiro ◽  
M. Borges ◽  
S. Malta
Keyword(s):  
Porous Media ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Water Injection ◽  
Heterogeneous Porous Media ◽  
Flow In Porous Media ◽  
High Porosity ◽  
Two Phase ◽  
Recovery Method ◽  
Porosity And Permeability

In this work,we present three-dimensional numerical simulations of water-oil flow in porous media in order to analyze the influence of the heterogeneities in the porosity and permeability fields and, mainly, their relationships upon the phenomenon known in the literature as viscous fingering. For this, typical scenarios of heterogeneous reservoirs submitted to water injection (secondary recovery method) are considered. The results show that the porosity heterogeneities have a markable influence in the flow behavior when the permeability is closely related with porosity, for example, by the Kozeny-Carman (KC) relation.This kind of positive relation leads to a larger oil recovery, as the areas of high permeability(higher flow velocities) are associated with areas of high porosity (higher volume of pores), causing a delay in the breakthrough time. On the other hand, when both fields (porosity and permeability) are heterogeneous but independent of each other the influence of the porosity heterogeneities is smaller and may be negligible.

Labortory and Pilot Tests of Enhanced Oil Recovery through Wettability Alteration by Diluted Microemulsions

2021 ◽  
Author(s):  
Xurong Zhao ◽  
Tianbo Liang ◽  
Jingge Zan ◽  
Mengchuan Zhang ◽  
Fujian Zhou ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Saturation ◽  
Wettability Alteration ◽  
Rock Surface ◽  
Core Flooding ◽  
Fracturing Fluid ◽  
Invasion Front ◽  
Wetting Ability ◽  
On Line ◽  
Wet Rocks

Abstract Replacing oil from small pores of tight oil-wet rocks relies on altering the rock wettability with the injected fracturing fluid. Among different types of wettability-alteration surfactants, the liquid nanofluid has less adsorption loss during transport in the porous media, and can efficiently alter the rock wettability; meanwhile, it can also maintain a certain oil-water interfacial tension driving the water imbibition. In the previous study, the main properties of a Nonionic nanofluid-diluted microemulsion (DME) were evaluated, and the dispersion coefficient and adsorption rate of DME in tight rock under different conditions were quantified. In this study, to more intuitively show the change of wettability of DME to oil-wet rocks in the process of core flooding experiments and the changes of the water invasion front, CT is used to carry out on-line core flooding experiments, scan and calculate the water saturation in time, and compare it with the pressure drop in this process. Besides, the heterogeneity of rock samples is quantified in this paper. The results show that when the DME is used as the fracturing fluid additive, fingering of the water phase is observed at the beginning of the invasion; compared with brine, the fracturing fluid with DME has deeper invasion depth at the same time; the water invasion front gradually becomes uniform when the DME alters the rock wettability and triggers the imbibition; for tight rocks, DME can enter deeper pores and replace more oil because of its dominance. Finally, the selected nanofluids of DME were tested in two horizontal wells in the field, and their flowback fluids were collected and analyzed. The results show that the average droplet size of the flowback fluids in the wells using DME decreases with production time, and the altered wetting ability gradually returns to the level of the injected fracturing fluid. It can be confirmed that DME can migrate within the tight rock, make the rock surface more water-wet and enhance the imbibition capacity of the fracturing fluid, to reduce the reservoir pressure decline rate and increase production.

scholarly journals Coupling of two-phase flow in fractured-vuggy reservoir with filling medium

Open Physics ◽  
2017 ◽  
Vol 15 (1) ◽  
pp. 12-17 ◽  
Author(s):  
Haojun Xie ◽  
Aifen Li ◽  
Zhaoqin Huang ◽  
Bo Gao ◽  
Ruigang Peng
Keyword(s):  
Porous Media ◽  
Oil Recovery ◽  
Two Phase Flow ◽  
Water Injection ◽  
Free Flow ◽  
Flow In Porous Media ◽  
Free Fluid ◽  
Phase Flow ◽  
Fluid Exchange ◽  
Two Phase

AbstractCaves in fractured-vuggy reservoir usually contain lots of filling medium, so the two-phase flow in formations is the coupling of free flow and porous flow, and that usually leads to low oil recovery. Considering geological interpretation results, the physical filled cave models with different filling mediums are designed. Through physical experiment, the displacement mechanism between un-filled areas and the filling medium was studied. Based on the experiment model, we built a mathematical model of laminar two-phase coupling flow considering wettability of the porous media. The free fluid region was modeled using the Navier-Stokes and Cahn-Hilliard equations, and the two-phase flow in porous media used Darcy's theory. Extended BJS conditions were also applied at the coupling interface. The numerical simulation matched the experiment very well, so this numerical model can be used for two-phase flow in fracture-vuggy reservoir. In the simulations, fluid flow between inlet and outlet is free flow, so the pressure difference was relatively low compared with capillary pressure. In the process of water injection, the capillary resistance on the surface of oil-wet filling medium may hinder the oil-water gravity differentiation, leading to no fluid exchange on coupling interface and remaining oil in the filling medium. But for the water-wet filling medium, capillary force on the surface will coordinate with gravity. So it will lead to water imbibition and fluid exchange on the interface, high oil recovery will finally be reached at last.

scholarly journals Interfacial Phenomena Effect on Sand Production Due to Optimized Smart Water with/without the Presence of Nanoparticles

2020 ◽  
Vol 10 (6) ◽  
pp. 6652-6668
Keyword(s):  
Oil Recovery ◽  
High Efficiency ◽  
Low Cost ◽  
Water Injection ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Rock Surface ◽  
Sand Production ◽  
Smart Water ◽  
Comparison Of The Results

Historically, smart water flooding is proved as one of the methods used to enhance oil recovery from hydrocarbon reservoirs. This method has been spread due to its low cost and ease of operation, with changing the composition and concentration of salts in the water, the smart water injection leads to more excellent compatibility with rock and fluids. However, due to a large number of sandstone reservoirs in the world and the increase of the recovery factor using this high-efficiency method, a problem occurs with the continued injection of smart water into these reservoirs a phenomenon happened in which called rock leaching. Indeed, sand production is the most common problem in these fields. Rock wettability alteration toward water wetting is considered as the main cause of sand production during the smart water injection mechanism. During this process, due to stresses on the rock surface as well as disturbance of equilibrium, the sand production in the porous media takes place. In this paper, the effect of wettability alteration of oil wetted sandstones (0.005,0.01,0.02 and 0.03 molar stearic acid in normal heptane) on sand production in the presence of smart water is fully investigated. The implementation of an effective chemical method, which is nanoparticles, have been executed to prevent sand production. By stabilizing silica nanoparticles (SiO2) at an optimum concentration of 2000 ppm in smart water (pH=8) according to the results of Zeta potential and DLS test, the effect of wettability alteration of oil wetted sandstones on sand production in the presence of smart water with nanoparticles is thoroughly reviewed. Ultimately, a comparison of the results showed that nanoparticles significantly reduced sand production.

scholarly journals Wettability alteration analysis of smart water/novel functionalized nanocomposites for enhanced oil recovery

2020 ◽  
Vol 17 (5) ◽  
pp. 1318-1328
Author(s):  
Sara Habibi ◽  
Arezou Jafari ◽  
Zahra Fakhroueian
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Ionic Composition ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Core Flooding ◽  
Sulfate Ions ◽  
Smart Water ◽  
Eor Processes ◽  
Co Precipitation

Abstract Smart water flooding, as a popular method to change the wettability of carbonate rocks, is one of the interesting and challenging issues in reservoir engineering. In addition, the recent studies show that nanoparticles have a great potential for application in EOR processes. However, little research has been conducted on the use of smart water with nanoparticles in enhanced oil recovery. In this study, stability, contact angle and IFT measurements and multi-step core flooding tests were designed to investigate the effect of the ionic composition of smart water containing SO42− and Ca2+ ions in the presence of nanofluid on EOR processes. The amine/organosiloxane@Al2O3/SiO2 (AOAS) nanocomposite previously synthesized using co-precipitation-hydrothermal method has been used here. However, for the first time the application of this nanocomposite along with smart water has been studied in this research. Results show that by increasing the concentrations of calcium and sulfate ions in smart water, oil recovery is improved by 9% and 10%, respectively, compared to seawater. In addition, the use of smart water and nanofluids simultaneously is very effective on increasing oil recovery. Finally, the best performance was observed in smart water containing two times of sulfate ions concentration (SW2S) with nanofluids, showing increased efficiency of about 7.5%.

Low Salinity Hot Water Injection With Addition of Nanoparticles for Enhancing Heavy Oil Recovery

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Yanan Ding ◽  
Sixu Zheng ◽  
Xiaoyan Meng ◽  
Daoyong Yang
Keyword(s):  
Thermal Energy ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Water Injection ◽  
Operating Conditions ◽  
Hot Water ◽  
Wettability Alteration ◽  
Heavy Oil Recovery ◽  
Oil Saturation ◽  
Low Salinity

In this study, a novel technique of low salinity hot water (LSHW) injection with addition of nanoparticles has been developed to examine the synergistic effects of thermal energy, low salinity water (LSW) flooding, and nanoparticles for enhancing heavy oil recovery, while optimizing the operating parameters for such a hybrid enhanced oil recovery (EOR) method. Experimentally, one-dimensional displacement experiments under different temperatures (17 °C, 45 °C, and 70 °C) and pressures (about 2000–4700 kPa) have been performed, while two types of nanoparticles (i.e., SiO2 and Al2O3) are, respectively, examined as the additive in the LSW. The performance of LSW injection with and without nanoparticles at various temperatures is evaluated, allowing optimization of the timing to initiate LSW injection. The corresponding initial oil saturation, production rate, water cut, ultimate oil recovery, and residual oil saturation profile after each flooding process are continuously monitored and measured under various operating conditions. Compared to conventional water injection, the LSW injection is found to effectively improve heavy oil recovery by 2.4–7.2% as an EOR technique in the presence of nanoparticles. Also, the addition of nanoparticles into the LSHW can promote synergistic effect of thermal energy, wettability alteration, and reduction of interfacial tension (IFT), which improves displacement efficiency and thus enhances oil recovery. It has been experimentally demonstrated that such LSHW injection with the addition of nanoparticles can be optimized to greatly improve oil recovery up to 40.2% in heavy oil reservoirs with low energy consumption. Theoretically, numerical simulation for the different flooding scenarios has been performed to capture the underlying recovery mechanisms by history matching the experimental measurements. It is observed from the tuned relative permeability curves that both LSW and the addition of nanoparticles in LSW are capable of altering the sand surface to more water wet, which confirms wettability alteration as an important EOR mechanism for the application of LSW and nanoparticles in heavy oil recovery in addition to IFT reduction.

Sign in / Sign up

Export Citation Format

Share Document