scholarly journals Preparation of Clindamycin Hydrochloride Loaded De-Esterified Low-Methoxyl Mango Peel Pectin Film Used as a Topical Drug Delivery System

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1006 ◽  
Author(s):  
Tanpong Chaiwarit ◽  
Pornchai Rachtanapun ◽  
Nutthapong Kantrong ◽  
Pensak Jantrawut
Keyword(s):  
Drug Loading ◽  
Antibacterial Activities ◽  
Great Promise ◽  
Drug Release Profile ◽  
Film Forming ◽  
Cutibacterium Acnes ◽  
Alternative Material ◽  
Mango Peel ◽  
The Fourier Transform ◽  
Puncture Strength

In this study, we aimed to develop a low-mexthoxyl pectin (LMP) from mango peel pectin through a de-esterification method for use as a film forming agent. The prepared de-esterified pectin (DP) was compared to commercial LMP (cLMP) which possessed a 29% degree of esterification (DE). Mango peel pectin was extracted from ripe Nam Dokmai mango peel using the microwave-assisted extraction method. Pectin derived from the mango peel was classified as a high mexthoxyl pectin (79% DE) with 75% of galacturonic acid (GalA) content. A de-esterification experiment was designed by central composite design to plot the surface response curve. Our prepared DP was classified as LMP (DE 29.40%) with 69% GalA. In addition, the Fourier-transform infrared spectrophotometer (FTIR) spectra of the DP were similar to cLMP and the pectin backbone was not changed by the de-esterification process. Strikingly, the cLMP and DP films showed non-significant differences between their physical properties (p > 0.05) with respect to the puncture strength (13.72 N/mm2 and 11.13 N/mm2 for the cLMP and DP films, respectively), percent elongation (2.75% and 2.52% for the cLMP and DP films, respectively), and Young’s modulus (67.69 N/mm2 and 61.79 N/mm2 for the cLMP and DP films, respectively). The de-esterified pectin containing clindamycin HCl (DPC) and low-methoxyl pectin containing clindamycin HCl (cLMPC) films demonstrated 93.47% and 98.79% of drug loading content. The mechanical properties of the cLMPC and DPC films were improved possibly due to their crystal structures and a plasticizing effect of clindamycin HCl loaded into the films. The DPC film exhibited a drug release profile similar to that of the cLMPC film. Our anti-bacterial test of the films found that the cLMPC film showed 41.11 and 76.30 mm inhibitory clear zones against Staphylococcus aureus and Cutibacterium acnes, respectively. The DPC film showed 40.78 and 74.04 mm clear zones against S. aureus and C. acnes, respectively. The antibacterial activities of the cLMPC and DPC films were not significantly different from a commercial clindamycin solution. The results of this study suggest that mango peel pectin can be de-esterified and utilized as an LMP and the de-esterified pectin has the potential for use as a film forming agent, similar to cLMP. In addition, the remarkable use of de-esterified mango peel pectin to prepare films, as shown by our study, holds a great promise as an alternative material for anti-bacterial purposes.

Carboxymethyl-hexanoyl Chitosan Nanodroplets for Ultrasonic Imaging and Drug Delivery to Tumor

2018 ◽  
Vol 24 (15) ◽  
pp. 1682-1688 ◽  
Author(s):  
Yu Jinsui ◽  
Situ Bing ◽  
Luo Muhua ◽  
Li Yue ◽  
Liao Jianyi ◽  
...  
Keyword(s):  
Ultrasound Imaging ◽  
Tumor Therapy ◽  
Carboxymethyl Chitosan ◽  
Great Promise ◽  
Ovarian Cancer Cells ◽  
Mechanical Index ◽  
Surface Charges ◽  
Particle Structure ◽  
Drug Release Profile ◽  
Hexanoyl Chitosan

Introduction: Although a great many strategies have been proposed for tumor-targeted chemotherapy, current delivery methods of anticancer drugs present limited success with inevitable systemic toxicity. The aim of this study was to develop a new kind of theranostic carrier for targeted tumor therapy. Methods: Prior to prepare CHC-PFP-DOX, carboxymethyl-hexanoyl chitosan (CHC) was synthesized by acylation of carboxymethyl chitosan. To develop CHC-PFP, perfluoropentane (PFP), an ultrasound gas precursor, was simultaneously encapsulated into the hydrophobic inner cores of pre-formulated CHC micelle in aqueous phase via using the oil in water (O/W) emulsion method. The size distribution and surface charges of these nanodroplets were measured and the morphology was observed by transmission electron microscopy (TEM). For ultrasound imaging application, in vitro model was established to evaluate the imaging of CHC-PFP-DOX under different concentration and mechanical index. After that, the anti-tumor effect of ultrasound combined with CHC-PFPDOX on ovarian cancer cells was investigated. Results: The resulting CHC-PFP-DOX had a nano-sized particle structure, with hydrophobic anticancer DOX/PFP inner cores and a hydrophilic carboxymethyl chitosan polymer outer shell. The favorable nano-scaled size offers the potential to extravagate from veins and accumulate in tumor tissues via enhanced permeation and retention (EPR) effect. Additionally, CHC-PFP-DOX showed the ability to serve as ultrasound imaging agent at body temperature. Notably, it exhibited an ultrasound-triggered drug release profile through the external ultrasound irradiation. Further study demonstrated that ultrasound combined with CHC-PFP-DOX can improve the killing effect of chemotherapy for tumor. Conclusion: CHC-PFP-DOX holds great promise in simultaneous cancer-targeting ultrasound imaging and ultrasound- mediated delivery for cancer chemotherapy.

Stereocomplexation Assisted Assembly of Poly(γ-glutamic Acid)-graft-polylactide Nano-micelles and Their Efficacy as Anticancer Drug Carrier

2018 ◽  
Vol 18 (2) ◽  
pp. 302-311
Author(s):  
Shulin Dai ◽  
Yucheng Feng ◽  
Shuyi Li ◽  
Yuxiao Chen ◽  
Meiqing Liu ◽  
...  
Keyword(s):  
Glutamic Acid ◽  
Drug Carrier ◽  
Drug Loading ◽  
Drug Carriers ◽  
Cancer Drug ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Anti Cancer ◽  
Physical Interactions

Background: Micelles as drug carriers are characterized by their inherent instability due to the weak physical interactions that facilitate the self-assembly of amphiphilic block copolymers. As one of the strong physical interactions, the stereocomplexation between the equal molar of enantiomeric polylactides, i.e., the poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA), may be harnessed to obtain micelles with enhanced stability and drug loading capacity and consequent sustained release. </P><P> Aims/Methods: In this paper, stereocomplexed micelles gama-PGA-g-PLA micelles) were fabricated from the stereocomplexation between poly(gama-glutamic acid)-graft-PLLA gama-PGA-g-PLA) and poly(gamaglutamic acid)-graft-PDLA gama-PGA-g-PLA). These stereocomplexed micelles exhibited a lower CMC than the corresponding enantiomeric micelles. Result: Furthermore, they showed higher drug loading content and drug loading efficiency in addition to more sustained drug release profile in vitro. In vivo imaging confirmed that the DiR-encapsulated stereocomplexed gama-PGA-g-PLA micelles can deliver anti-cancer drug to tumors with enhanced tissue penetration. Overall, gama-PGA-g-PLA micelles exhibited greater anti-cancer effects as compared with the free drug and the stereocomplexation may be a promising strategy for fabrication of anti-cancer drug carriers with significantly enhanced efficacy.

scholarly journals A New Hope: Self-Assembling Peptides with Antimicrobial Activity

Pharmaceutics ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 166 ◽  
Author(s):  
Lucia Lombardi ◽  
Annarita Falanga ◽  
Valentina Del Genio ◽  
Stefania Galdiero
Keyword(s):  
Self Assembly ◽  
Biomedical Applications ◽  
High Specificity ◽  
Antibacterial Activities ◽  
Mechanisms Of Action ◽  
Great Promise ◽  
Functional Nanomaterials ◽  
Self Assembling ◽  
Low Toxicity ◽  
Bio Compatibility

Peptide drugs hold great promise for the treatment of infectious diseases thanks to their novel mechanisms of action, low toxicity, high specificity, and ease of synthesis and modification. Naturally developing self-assembly in nature has inspired remarkable interest in self-assembly of peptides to functional nanomaterials. As a matter of fact, their structural, mechanical, and functional advantages, plus their high bio-compatibility and bio-degradability make them excellent candidates for facilitating biomedical applications. This review focuses on the self-assembly of peptides for the fabrication of antibacterial nanomaterials holding great interest for substituting antibiotics, with emphasis on strategies to achieve nano-architectures of self-assembly. The antibacterial activities achieved by these nanomaterials are also described.

FORMULATION AND EVALUATION OF FAST DISSOLVING ORAL FILMS OF PROCHLORPERAZINE MALEATE

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (12) ◽  
pp. 23-33
Author(s):  
R. Kanekar ◽  
◽  
P. M. Dandagi ◽  
A. P. Gadad
Keyword(s):  
Ex Vivo ◽  
Rapid Onset ◽  
Drug Release Profile ◽  
Onset Of Action ◽  
In Vitro Drug Release ◽  
Physico Chemical ◽  
Film Forming ◽  
Oral Films ◽  
Ex Vivo Study

The objective of the present study was to prepare and evaluate fast-dissolving oral films of prochlorperazine maleate (PCM), in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The solubility of the drug was increased by preparing inclusion complex with 2-hydroxypropyl-β-cyclodextrin (2HPβCD) and then incorporating it into the fast dissolving films. The fast-dissolving films of PCM were prepared by solvent casting method using different film forming polymers such as HPMC E15 and HPMC E5, either as single polymer or combination of the two. The film formulations were evaluated for various physico-chemical parameters. All formulations released more than 85% of the drug within 15 minutes. Formulation F4 showed best in vitro drug release profile. From the ex vivo study it was found that 94.79% of drug permeated through the porcine oral mucosa from the optimized formulation F4 within 60 mins.

scholarly journals Synthesis of pH-Sensitive and Self-Fluorescent Polymeric Micelles Derived From Rosin and Vegetable Oils via ATRP

2021 ◽  
Vol 9 ◽  
Author(s):  
Juan Yu ◽  
Chaoqun Xu ◽  
Chuanwei Lu ◽  
Qian Liu ◽  
Jifu Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Vegetable Oils ◽  
Renewable Resources ◽  
Polymeric Micelles ◽  
Drug Loading ◽  
Dehydroabietic Acid ◽  
Great Promise ◽  
Loading Capacity ◽  
Carboxylic Groups ◽  
Ph Dependent

Preparation and application of sustainable polymers derived from renewable resources are of great significance. The aim of this study is to synthesize a kind of sustainable polymeric micelles from rosin and vegetable oils via atom transfer radical polymerization (ATRP) and to investigate the doxorubicin delivery properties of these micelles. Dehydroabietic acid–based poly lauryl methacrylate (DA-PLMA) with narrow PDI of 1.13 was prepared in a well-controlled process using rosin as an ATRP initiator. Thereafter, carboxylic groups were introduced to form poly methacrylic acid (PMAA) moieties in DA-PLMA polymer via acid hydrolysis. The resulted DA-PLMA-PMAA could self-assemble in water to form pH-dependent polymeric micelles with a diameter of ∼65 nm and PDI as low as 0.105. Owing to the existence of rosin, DA-PLMA-PMAA micelles also showed self-fluorescence properties. In addition, Dox-loaded micelles were prepared in aqueous solution with the drug-loading capacity as high as 16.0% and showed sustained-release characteristics. These results demonstrate great promise for designing polymeric micellar from rosin and vegetable oils.

scholarly journals Improving Anticancer Therapy with Naringenin-Loaded Silk Fibroin Nanoparticles

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 718 ◽  
Author(s):  
Marta G. Fuster ◽  
Guzmán Carissimi ◽  
Mercedes G. Montalbán ◽  
Gloria Víllora
Keyword(s):  
Silk Fibroin ◽  
Drug Loading ◽  
Drug Release Profile ◽  
Solubility In Water ◽  
Diphenyltetrazolium Bromide ◽  
Wide Range ◽  
Silk Fibroin Nanoparticles ◽  
Ea.Hy926 Cells ◽  
Cytotoxicity Effects

Naringenin (NAR), a flavonoid present in a variety of fruits, vegetables and herbs, exhibits a wide range of pharmacological effects, including anticancer activity. Nevertheless, its application in cancer therapy is limited due to its low bioavailability at the tumour site because of its poor solubility in water and slow dissolution rate. To improve the therapeutic efficacy of NAR, emergent research is looking into using nanocarriers. Silk fibroin (SF), from the Bombyx mori silkworm, is a biocompatible and biodegradable polymer with excellent mechanical properties and an amphiphilic chemistry that make it a promising candidate as a controlled release drug system. The aim of this work is to synthesize naringenin-loaded silk fibroin nanoparticles (NAR-SFNs) by dissolving the SF in the ionic liquid 1-ethyl-3-methylimidazolium acetate, using high-power ultrasounds and rapid desolvation in methanol followed by the adsorption of NAR. The NAR-SFNs were characterized by dynamic light scattering, Fourier transform infrared spectroscopy and thermogravimetric analysis. The drug loading content and encapsulation efficiency were calculated. The drug release profile best fitted a first order equation. The cytotoxicity effects of free NAR, bare silk fibroin nanoparticles (SFNs) and NAR-SFNs were assessed on HeLa and EA.hy926 cells via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The results demonstrated the higher in vitro anticancer potential of synthesized NAR-SFNs than that of free NAR in HeLa cancer cells.

scholarly journals Thiophene Derivatives as Anticancer Agents and Their Delivery to Tumor Cells Using Albumin Nanoparticles

Molecules ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 192 ◽  
Author(s):  
Guangsheng Cai ◽  
Simiao Wang ◽  
Lang Zhao ◽  
Yating Sun ◽  
Dongsheng Yang ◽  
...  
Keyword(s):  
Tumor Cells ◽  
Cell Lines ◽  
Anticancer Agents ◽  
Drug Loading ◽  
Great Promise ◽  
Self Assembling ◽  
Laser Confocal Scanning Microscopy ◽  
Confocal Scanning ◽  
Thiophene Derivatives

A series of thiophene derivatives (TPs) were synthesized and evaluated for cytotoxicity in HepG2 and SMMC-7721 cell lines by MTT assay. TP 5 was identified as a potential anticancer agent based on its ability to inhibit tumor cell growth. Drawbacks of TPs, including poor solubility and high toxicity, were overcome through delivery using self-assembling HSA nanoparticles (NPs). The optimum conditions for TP 5-NPs synthesis obtained by adjusting the temperature and concentration of TP 5. The NPs had an encapsulation efficiency of 99.59% and drug-loading capacity of 3.70%. TP 5 was slowly released from TP 5-NPs in vitro over 120 h. HepG2 and SMMC-7721 cell lines were employed to study cytotoxicity of TP 5-NPs, which exhibited high potency. ROS levels were elevated and mitochondrial membrane potentials reversed when the two cell lines were treated with TP 5-NPs for 12 h. Cellular uptake of fluorescence-labeled TP 5-NPs in vitro was analyzed by flow cytometry and laser confocal scanning microscopy. Fluorescence intensity increased over time, suggesting that TP 5-NPs were efficiently taken up by tumor cells. In conclusion, TP 5-NPs showed great promise as an anticancer therapeutic agent.

scholarly journals Thermosensitive Chitosan Hydrogels Containing Polymeric Microspheres for Vaginal Drug Delivery

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Ting-Ting Yang ◽  
Yuan-Zheng Cheng ◽  
Meng Qin ◽  
Yong-Hong Wang ◽  
Hong-Li Yu ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Delivery System ◽  
Drug Loading ◽  
Great Promise ◽  
Burst Release ◽  
Bletilla Striata ◽  
Vaginal Drug Delivery ◽  
Thermosensitive Hydrogels

Thermosensitive hydrogels have increasingly received considerable attention for local drug delivery based on many advantages. However, burst release of drugs is becoming a critical challenge when the hydrogels are employed. Microspheres- (MS-) loaded thermosensitive hydrogels were thus fabricated to address this limitation. Employing an orthogonal design, the spray-dried operations of tenofovir (TFV)/Bletilla striata polysaccharide (BSP)/chitosan (CTS) MS were optimized according to the drug loading (DL). The physicochemical properties of the optimal MS (MS F) were characterized. Depending on the gelation temperature and gelating time, the optimal CTS-sodium alginate- (SA-) α,β-glycerophosphate (GP) (CTS-SA-GP) hydrogel was obtained. Observed by scanning electron microscope (SEM), TFV/BSP/CTS MS were successfully encapsulated in CTS-SA-GP. In vitro releasing demonstrated that MS F-CTS-SA-GP retained desirable in vitro sustained-release characteristics as a vaginal delivery system. Bioadhesion measurement showed that MS-CTS-SA-GP exhibited the highest mucoadhesive strength. Collectively, MS-CTS-SA-GP holds great promise for topical applications as a sustained-release vaginal drug delivery system.

scholarly journals Drug Release from a Spherical Matrix: Theoretical Analysis for a Finite Dissolution Rate Affected by Geometric Shape of Dispersed Drugs

Pharmaceutics ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 582
Author(s):  
Yung-Sheng Lin ◽  
Ruey-Yug Tsay
Keyword(s):  
Drug Release ◽  
Release Rate ◽  
Shape Factor ◽  
Numerical Solutions ◽  
Drug Loading ◽  
Spherical Geometry ◽  
Detailed Comparison ◽  
Release Profile ◽  
Drug Release Profile ◽  
Drug Release Rate

Amending the neglect of finite dissolution in traditional release models, this study proposed a more generalized drug release model considering the simultaneous dissolution and diffusion procedure from a drug-loaded spherical matrix. How the shape factor (n = 0, 1/2, and 2/3 for the planar, cylindrical, and spherical geometry, respectively) of dispersed drug particles affected the release from the matrix was examined for the first time. Numerical solutions of this generalized model were validated by consensus with a short-time analytical solution for planar drugs and by the approach of the diffusion-controlled limits with Higuchi’s model. The drug release rate increases with the ratio of dissolution/diffusion rate (G) and the ratio of solubility/drug loading (K) but decreases with the shape factor of drug particles. A zero-order release profile is identified for planar drugs before starting the surface depletion layer, and also found for cylindrical and spherical dispersed drugs when K and G are small, i.e. the loaded drug is mainly un-dissolved and the drug release rate is dissolution-controlled. It is also shown that for the case of a small G value, the variation of drug release profile, due to the drug particle geometry, becomes prominent. Detailed comparison with the results of the traditional Higuchi’s model indicates that Higuchi’s model can be applied only when G is large because of the assumption of an instantaneous dissolution. For K = 1/101–1/2, the present analysis suggests an error of 33–85% for drug release predicted by Higuchi’s model for G = 100, 14–44% error for G = 101, while a less than 5% error for G ≧ 103.

Development and Characterization of Binary Solid Lipid Nano Suspension of Atorvastatin: In-Vitro Drug Release and In-Vivo Pharmacokinetic Studies

2019 ◽  
Vol 11 (11) ◽  
pp. 1522-1530
Author(s):  
Mahwish Kamran ◽  
Mir Azam Khan ◽  
Muhammad Shafique ◽  
Maqsood ur Rehman ◽  
Waqar Ahmed ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Bioavailability ◽  
Drug Loading ◽  
Lipid Lowering ◽  
Diffusion Method ◽  
Pharmacokinetic Studies ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Solid Lipid

Atorvastatin is an extensively used lipid lowering agent. But the vital issue associated with it is low oral bioavailability (12%) owing to poor aqueous solubility. To overcome this tribulation, binary solid lipid nano suspension of Atorvastatin (ATO) was formulated by solvent diffusion method. The combination of stearic acid and oleic acid was utilized as a lipid carrier with Tween-80 (surfactant) along with Polyvinylpyrrolidone (co-surfactant). Optimized nano formulation was prepared by changing the formulation variables. Optimized nano suspension (ATO-4) represented particle size 228.3 ± 2.1 nm and polydispersity index (PDI) 0.225 ± 0.02 with zeta potential (ZP) – 33.6 ± 0.02 mV. Encapsulation efficiency along with drug loading capacity was 88.3 ± 2.5% and 4.9 ± 0.14% respectively. Scanning electron microscopic (SEM) analysis exposed spherical shaped amorphous particles. Differential scanning calorimetry (DSC) as well as X-ray powder diffraction (P-XRD) established reduction in drug's crystalline state. Fourier transform infrared (FTIR) spectroscopy exposed no interaction amongst the drug and formulation contents. In-vitro studies revealed sustained pattern of drug release. Stability studies confirmed refrigerated temperature as most suitable for storage of binary solid lipid nano suspension. Plasma concentration versus time curve ascertained 2.78-fold increase in oral bioavailability of ATO nano suspension compared to the marketed product (Lipitor®). Findings proposed desired improvement in oral bioavailability of ATO nano suspension with sustained drug release profile. Thus, binary solid lipid nano suspension could be utilized as an advanced drug delivery system for oral deliverance of hydrophobic drugs.

Sign in / Sign up

Export Citation Format

Share Document