scholarly journals Mussel-Inspired Co-Deposition of Polydopamine/Silica Nanoparticles onto Carbon Fiber for Improved Interfacial Strength and Hydrothermal Aging Resistance of Composites

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 712 ◽  
Author(s):  
Xuejun Cui ◽  
Lichun Ma ◽  
Guangshun Wu
Keyword(s):  
Carbon Fibers ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
The Novel ◽  
Hydrothermal Aging ◽  
One Pot ◽  
Polar Groups ◽  
Aging Resistance ◽  
Interfacial Compatibility ◽  
Hydrolysis Of

A novel and effective strategy was first proposed for the codeposition of a mussel-inspired nanohybrid coating with excellent wettability onto the surface of carbon fibers (CFs) by simultaneous polymerization of bioinspired dopamine (DA) and hydrolysis of commercial tetraethoxysilane (TEOS) in an eco-friendly one-pot process. Mussel-inspired nanohybrids could be adhered onto the surface of CFs firmly. The novel modification could afford sufficient polar groups and significantly improve fiber surface roughness and energy without decreasing fiber intrinsic strength, which were advantageous to promote interfacial compatibility and wettability between CFs and matrix resin. As a result, the interfacial shear strength of composites increased to 48.21 ± 1.45 MPa compared to that of untreated composites 29.47 ± 0.88 MPa. Meanwhile, the nanohybrid coating increased significantly composites’ hydrothermal aging resistance. The efficient strategy shows a promising and green platform of surface functionalization of CFs for preparing advanced polymer composites arising from broadly mechanical-demanding and energy-saving usages.

scholarly journals Facile Strategy of Improving Interfacial Strength of Silicone Resin Composites Through Self-Polymerized Polydopamine Followed via the Sol-Gel Growing of Silica Nanoparticles onto Carbon Fiber

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1639 ◽  
Author(s):  
Yawen Zheng ◽  
Xiaoyun Wang ◽  
Guangshun Wu
Keyword(s):  
Shear Strength ◽  
Silica Nanoparticles ◽  
Carbon Fibers ◽  
Sol Gel ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Silicone Resin ◽  
Matrix Resin ◽  
Hydrothermal Aging ◽  
Interlaminar Shear

In the present research, to enhance interfacial wettability and adhesion between carbon fibers (CFs) and matrix resin, hydrophilic silica nanoparticles (SiO2) were utilized to graft the surface of CFs. Polydopamine (PDA) as a “bio-glue” was architecturally built between SiO2 and CFs to obtain a strong adhesion strength and homogenous SiO2 distribution onto the surface of CFs. The facile modification strategy was designed by self-polymerization of dopamine followed by the hydrolysis of tetraethoxysilane (TEOS) onto carbon fibers. Surface microstructures and interfacial properties of CFs, before and after modification, were systematically investigated. The tight and homogeneous coverage of SiO2 layers onto the CF surface, with the assistance of a PDA layer by self-polymerization of dopamine, significantly enhanced fiber surface roughness and wettability, resulting in an obvious improvement of mechanical interlocking and interfacial interactions between CFs and matrix resin. The interlaminar shear strength (ILSS) and the interfacial shear strength (IFSS) of CF/PDA/SiO2 reinforced composites exhibited 57.28% and 41.84% enhancements compared with those of untreated composites. In addition, impact strength and the hydrothermal aging resistance of the resulting composites showed great improvements after modification. The possible reinforcing mechanisms during the modification process have been discussed. This novel strategy of developed SiO2-modified CFs has interesting potential for interfacial improvements for advanced polymer composites.

Effect of CNT Grafting on Carbon Fibers on Impact Properties of CFRTP Laminate

2018 ◽  
Vol 774 ◽  
pp. 410-415 ◽  
Author(s):  
Kazuto Tanaka ◽  
Ken Uzumasa ◽  
Tsutao Katayama
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Impact Properties ◽  
Specific Strength ◽  
Out Of Plane ◽  
Reinforced Thermoplastics ◽  
The Impact

Carbon fiber reinforced thermoplastics (CFRTP) are expected to be used as a structural material for aircraft and automobiles not only for their mechanical properties such as high specific strength and high specific rigidity but also for their high recyclability and short molding time. Generally, in a composite material having a laminated structure, interlaminar delamination is often caused by an out-of-plane impact, so the interlayer property plays an important role in the mechanical properties. It has been reported that the fiber/matrix interfacial strength increases by grafting carbon nanotubes (CNT) on the carbon fiber surface. In this study, CNT grafted carbon fibers were used for reinforcement of CFRTP laminate for the improvement of impact properties of CFRTP laminates. The impact absorbed energy of the CFRTP laminate using CNT grafted carbon fibers as reinforcing fiber was higher than that using untreated CF.

scholarly journals Grafting Halloysite Nanotubes with Amino or Carboxyl Groups onto Carbon Fiber Surface for Excellent Interfacial Properties of Silicone Resin Composites

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1171 ◽  
Author(s):  
Xiandong Zhang ◽  
Guangshun Wu
Keyword(s):  
Interfacial Strength ◽  
Fiber Surface ◽  
Interfacial Properties ◽  
Halloysite Nanotubes ◽  
Carboxyl Groups ◽  
Silicone Resin ◽  
Hydrothermal Aging ◽  
Uniform Distributions ◽  
Chemical Grafting ◽  
First Time

The quality of interphase in carbon fibers (CFs) composites makes a key contribution to overall performance of composites. Here, we achieved for the first time the chemical grafting of halloysite nanotubes (HNTs) with amino or carboxyl groups onto the CFs surface aiming to increase composites interfacial strength. HNTs were grafted using 3-aminopropyltriethoxysilane (APS) followed by succinic anhydride treatment, and HNTs with amino groups (HNT–NH2) or carboxyl groups (HNT–COOH) were separately introduced into the interphase of composites. Functional groups of HNTs and fiber surface structures were characterized, which confirmed the modification success. The wettability between the modified CFs and resin have been enhanced obviously based on the improved fiber polarity and enhanced surface roughness by the introduced two functionalized HNTs with the uniform distributions onto fiber surface. Moreover, interfacial properties and anti-hydrothermal aging behaviors of modified methylphenylsilicone resin (MPSR) composites were improved significantly, especially for HNT–COOH grafting. In addition, the interfacial reinforcement mechanisms for untreated and modified CF composites are discussed and compared.

Study of Transcrystallization in Polymer Composites

1989 ◽  
Vol 170 ◽  
Author(s):  
Benjamin S. Hsiao ◽  
J. H. Eric
Keyword(s):  
Thermal Conductivity ◽  
Free Energy ◽  
Carbon Fiber ◽  
Plasma Treatment ◽  
Polymer Composites ◽  
High Performance ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Semicrystalline Polymers ◽  
First Case

AbstractTranscrystallization of semicrystalline polymers, such as PEEK, PEKK and PPS, in high performance composites has been investigated. It is found that PPDT aramid fiber and pitch-based carbon fiber induce a transcrystalline interphase in all three polymers, whereas in PAN-based carbon fiber and glass fiber systems, transcrystallization occurs only under specific circumstances. Epitaxy is used to explain the surface-induced transcrystalline interphase in the first case. In the latter case, transcrystallization is probably not due to epitaxy, but may be attributed to the thermal conductivity mismatch. Plasma treatment on the fiber surface showed a negligible effect on inducing transcrystallization, implying that surface-free energy was not important. A microdebonding test was adopted to evaluate the interfacial strength between the fiber and matrix. Our preliminary results did not reveal any effect on the fiber/matrix interfacial strength of transcrystallinity.

scholarly journals Adjustment of Hydrophobic Properties of Cellulose Materials

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1241
Author(s):  
Michael Ioelovich
Keyword(s):  
Ester Group ◽  
Hydroxyl Groups ◽  
Chemical Methods ◽  
Hydrophobic Properties ◽  
Cellulose Esters ◽  
Cellulose Modification ◽  
Polar Groups ◽  
Polar Substituents ◽  
Hydrolysis Of ◽  
Cellulose Materials

In this study, physicochemical and chemical methods of cellulose modification were used to increase the hydrophobicity of this natural semicrystalline biopolymer. It has been shown that acid hydrolysis of the initial cellulose increases its crystallinity, which improves hydrophobicity, but only to a small extent. A more significant hydrophobization effect was observed after chemical modification by esterification, when polar hydroxyl groups of cellulose were replaced by non-polar substituents. The esterification process was accompanied by the disruption of the crystalline structure of cellulose and its transformation into the mesomorphous structure of cellulose esters. It was found that the replacement of cellulose hydroxyls with ester groups leads to a significant increase in the hydrophobicity of the resulting polymer. Moreover, the increase of the number of non-polar groups in the ester substituent contributes to rise in hydrophobicity of cellulose derivative. Depending on the type of ester group, the hydrophobicity increased in the following order: acetate < propionate < butyrate. Therefore, tributyrate cellulose (TBC) demonstrated the most hydrophobicity among all studied samples. In addition, the mixed ester, triacetobutyrate cellulose (TAB), also showed a sufficiently high hydrophobicity. The promising performance properties of hydrophobic cellulose esters, TBC and TAB, were also demonstrated.

Sign in / Sign up

Export Citation Format

Share Document