scholarly journals Effect of Porosity Gradient on Mechanical Properties of Cellular Nano-Composites

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 681
Author(s):  
Josef Jancar ◽  
Klara Zarybnicka ◽  
Jan Zidek ◽  
Frantisek Kucera
Keyword(s):  
Mechanical Properties ◽  
Cellular Structure ◽  
Spatial Organization ◽  
Wall Material ◽  
Nano Composites ◽  
Cellular Solids ◽  
Micro Particles ◽  
Static Mechanical ◽  
Hierarchical Architectures ◽  
Lightweight Engineering

With their hierarchical architectures incorporating gradients in composition, porosity, and orientation, natural materials have evolved optimized balance of mechanical properties. Deciphered from the structure of bamboo, we prepared cellular solids with convex and/or concave porosity gradient and investigated their static mechanical and impact properties. Non-monotonous porosity dependences of tensile, crush, and impact strength were related to the shape of porosity gradient rather than to the properties of the wall material alone. Our results provide experimental evidence, that novel mechanically robust low density additively fabricated cellular nano-composites with convex porosity gradient satisfy the structural requirements of lightweight engineering parts. Moreover, novel functions, such as reduced flammability or electrical conductivity, can easily be introduced by selecting the type and spatial organization of nanoparticles and cellular structure of the cellular micro-particles (CMPs).

scholarly journals Temperature-Dependent Creep Behavior and Quasi-Static Mechanical Properties of Heat-Treated Wood

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 968
Author(s):  
Dong Xing ◽  
Xinzhou Wang ◽  
Siqun Wang
Keyword(s):  
Mechanical Properties ◽  
Creep Behavior ◽  
Cell Walls ◽  
Treated Wood ◽  
Crosslinking Reaction ◽  
Depth Sensing ◽  
Temperature Dependent ◽  
Heat Treated ◽  
Static Mechanical ◽  
Static Mechanical Properties

In this paper, Berkovich depth-sensing indentation has been used to study the effects of the temperature-dependent quasi-static mechanical properties and creep deformation of heat-treated wood at temperatures from 20 °C to 180 °C. The characteristics of the load–depth curve, creep strain rate, creep compliance, and creep stress exponent of heat-treated wood are evaluated. The results showed that high temperature heat treatment improved the hardness of wood cell walls and reduced the creep rate of wood cell walls. This is mainly due to the improvement of the crystallinity of the cellulose, and the recondensation and crosslinking reaction of the lignocellulose structure. The Burgers model is well fitted to study the creep behavior of heat-treated wood cell walls under different temperatures.

Quasi-static mechanical properties of novel generalized Resch-pattern composite foldcores

2020 ◽  
pp. 095440622094000
Author(s):  
Antao Deng ◽  
Bin Ji ◽  
Xiang Zhou
Keyword(s):  
Mechanical Properties ◽  
Design Method ◽  
Absorption Capacity ◽  
Woven Fabrics ◽  
Geometric Design ◽  
Honeycomb Core ◽  
Reinforced Plastic ◽  
Static Mechanical ◽  
Laminate Thickness ◽  
Static Mechanical Properties

A new geometric design method for foldcores based on the generalized Resch patterns that allow face-to-face bonding interfaces between the core and the skins is proposed. Based on the geometric design method, a systematic numerical investigation on the quasi-static mechanical properties of the generalized Resch-based foldcores made of carbon fiber-reinforced plastic (CFRP) woven fabrics subjected to compression and shear loads is performed using the finite element method that is validated by experiments. The relationships between the mechanical properties and various geometric parameters as well as laminate thickness of the generalized Resch-based CFRP foldcores are revealed. Additionally, the mechanical properties of the generalized Resch-based CFRP foldcore are compared to those of the standard Resch-based, Miura-based foldcore, the honeycomb core, and the aluminum counterpart. It is found that the generalized Resch-based CFRP foldcore performs more stably than the honeycomb core under compression and has higher compressive and shear stiffnesses than the standard Resch-based and Miura-based foldcores and absorbs as nearly twice energy under compression as the Miura-based foldcore does. When compared with the aluminum counterpart, the CFRP model has higher weight-specific stiffness and strength but lower energy absorption capacity under shearing. The results presented in this paper can serve as the useful guideline for the design of the generalized Resch-based composite foldcore sandwich structures for various performance goals.

Effect of Bone Tumor and Osteoporosis on Mechanical Properties of Bone and Bone Tissue Properties: A Finite Element Study

2007 ◽  
Author(s):  
Vipul P. Gohil ◽  
Paul K. Canavan ◽  
Hamid Nayeb-Hashemi
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Bone Density ◽  
Bone Tissue ◽  
Bone Tumor ◽  
Cellular Structure ◽  
Bone Tumors ◽  
World Health ◽  
Tissue Stiffness ◽  
Tissue Properties

This research is aimed to study the variations in the biomechanical behavior of bone and bone tissues with osteoporosis and bone tumors. Osteoporosis and bone tumors reduce the mechanical strength of bone, which creates a greater risk of fracture. In the United States alone, ten million individuals, eight million of whom are women, are estimated to already have osteoporosis, and almost 34 million more are estimated to have low bone mass (osteopenia) placing them at increased risk for osteoporosis. World Health Organization defines osteopenia, as a bone density between one and two and a half standard deviations (SD) below the bone density of a normal young adult. (Osteoporosis is defined as 2.5 SD or more below that reference point.). Together, osteoporosis and osteopenia are expected to affect an estimated 52 million women and men age 50 and older by 2010, and 61 million by 2020. The current medical cost of osteoporosis total is nearly about $18 billion in the U.S. each year. There is a dearth of literature that addresses the effects of osteoporosis on bone tissue properties. Furthermore, there are few studies published related to the effect of bone tumors such as Adamantinoma of long bones, Aneurysmal bone cyst, Hemangioma and others on overall behavior of bone. To understand the variations in bio-mechanical properties of internal tissues of bone with osteoporosis and bone tumor, a 2D finite element (FE) model of bone is developed using ANSYS 9.0 ® (ANSYS Inc., Canonsburg, PA). Trabecular bone is modeled using hexagonal and voronoi cellular structure. This finite element model is subjected to change in BVF (bone volume fraction) and bone architecture caused by osteoporosis. The bone tumor is modeled as finer multi-cellular structure and the effects of its size, location, and property variation of tumor on overall bone behavior are studied. Results from this analysis and comparative data are used to determine behavior of bone and its tissue over different stage of osteoporosis and bone tumor. Results indicate that both bone tumor and osteoporosis significantly change the mechanical properties of the bone. The results show that osteoporosis increases the bone tissue stiffness significantly as BVF reduces. Bone tissue stiffness is found to increase by 80 percent with nearly 55 percent reduction of BVF. The results and methods developed in this research can be implemented to monitor variation in bio-mechanical properties of bone up to tissue level during medication or to determine type and time for need of external support such as bracing.

Phenolic Foam from Liquefied Products of Walnut Shell in Phenol

2011 ◽  
Vol 236-238 ◽  
pp. 241-246 ◽  
Author(s):  
Yuan Bo Huang ◽  
Zhi Feng Zheng ◽  
Hao Feng ◽  
Hui Pan
Keyword(s):  
Mechanical Properties ◽  
Reaction Temperature ◽  
Cellular Structure ◽  
Tween 80 ◽  
High Yield ◽  
Walnut Shell ◽  
Blowing Agent ◽  
Phenolic Foam ◽  
Resol Resin ◽  
Alkaline Conditions

The resol-type resin was prepared with a high yield from the liquefied products of walnut shell in phenol, which was reacted with formaldehyde under low alkaline conditions. The effects of reaction temperature and time on the yield and viscosity of the resol resin were investigated. Results showed that the optimum resol resinification conditions were a reaction temperature of 80°C and a reaction time of 2 h. The biomass-based resol resin from liquefied products of walnut shell was successfully applied to produce phenolic foam with diisopropyl ether as the blowing agent, Tween 80 as the surfactant and hydrochloric acid as the catalyst, respectively. The obtained foams showed satisfactory mechanical properties and a uniform fine cellular structure.

scholarly journals Preparation and properties of silicone rubber materials with foam/solid alternating multilayered structures

2021 ◽  
Author(s):  
Wenhuan Zhang ◽  
Zhaoping Deng ◽  
Hongwei Yuan ◽  
Shikai Luo ◽  
Huayin Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silicone Rubber ◽  
Cellular Structure ◽  
Cellular Structures ◽  
Compressive Property ◽  
Solid Layer ◽  
Multilayered Structures ◽  
Element Analysis ◽  
Morphology And Mechanical Properties

AbstractIn this paper, silicone rubber materials with foam/solid alternating multilayered structures were successfully constructed by combining the two methods of multilayered hot-pressing and supercritical carbon dioxide (SCCO2) foaming. The cellular morphology and mechanical properties of the foam/solid alternating multilayered silicone rubber materials were systematically studied. The results show that the growth of the cell was restrained by the solid layer, resulting in a decrease in the cell size. In addition, the introduction of the solid layer effectively improved the mechanical properties of the microcellular silicone rubber foam. The tensile strength and compressive strength of the foam/solid alternating multilayered silicone rubber materials reached 5.39 and 1.08 MPa, which are 46.1% and 237.5% of the pure silicone rubber foam, respectively. Finite element analysis (FEA) was applied and the results indicate that the strength and proportion of the solid layer played important roles in the tensile strength of the foam/solid alternating multilayered silicone rubber materials. Moreover, the small cellular structures in silicone rubber foam can provided a high supporting counterforce during compression, meaning that the microcellular structure of silicone rubber foam improved the compressive property compared to that for the large cellular structure of silicone rubber foam.

A Study on Estimation of S-N Curves for Structural Steels Based on their Static Mechanical Properties

2014 ◽  
Vol 891-892 ◽  
pp. 1639-1644 ◽  
Author(s):  
Kazutaka Mukoyama ◽  
Koushu Hanaki ◽  
Kenji Okada ◽  
Akiyoshi Sakaida ◽  
Atsushi Sugeta ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Evaluation Method ◽  
Materials Science ◽  
Estimation Method ◽  
Structural Steels ◽  
Metallic Materials ◽  
Fatigue Reliability ◽  
Regression Parameters ◽  
Static Mechanical ◽  
Static Mechanical Properties

The aim of this study is to develop a statistical estimation method of S-N curve for iron and structural steels by using their static mechanical properties. In this study, firstly, the S-N data for pure iron and structural steels were extracted from "Database on fatigue strength of Metallic Materials" published by the Society of Materials Science, Japan (JSMS) and S-N curve regression model was applied based on the JSMS standard, "Standard Evaluation Method of Fatigue Reliability for Metallic Materials -Standard Regression Method of S-N Curve-". Secondly, correlations between regression parameters and static mechanical properties were investigated. As a result, the relationship between the regression parameters and static mechanical properties (e.g. fatigue limit E and static tensile strength σB) showed strong correlations, respectively. Using these correlations, it is revealed that S-N curve for iron and structural steels can be predicted easily from the static mechanical properties.

Zinc Oxide PVDF Nano-Composites-Tuning Interfaces toward Enhanced Mechanical Properties and UV Protection

2016 ◽  
Vol 19 (3) ◽  
pp. 1600611 ◽  
Author(s):  
Erwan Castanet ◽  
Mohamed Al Thamish ◽  
Nishar Hameed ◽  
Andrew Krajewski ◽  
Ludovic F. Dumée ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Zinc Oxide ◽  
Uv Protection ◽  
Nano Composites
Sign in / Sign up

Export Citation Format

Share Document