scholarly journals Chemical Modification and Processing of Chitin for Sustainable Production of Biobased Electrolytes

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 207 ◽  
Author(s):  
Meriem Latifi ◽  
Azizan Ahmad ◽  
Hamid Kaddami ◽  
Nur Hasyareeda Hassan ◽  
Reiner Dieden ◽  
...  
Keyword(s):  
Ionic Conductivity ◽  
Reaction Times ◽  
Structural Features ◽  
Molar Ratio ◽  
Free Standing ◽  
Degree Of Acetylation ◽  
Optimized Conditions ◽  
Green Conditions ◽  
Fine Tune ◽  
Chitin Derivatives

In the present work we report on the development of a novel and sustainable electrolyte based on chitin. Chitin biopolymer was carboxymethylated in simple, mild, and green conditions in order to fine-tune the final properties of the electrolyte. To this end, chitin was modified for various reaction times, while the molar ratio of the reagents, e.g., sodium hydroxide and monochloroacetic acid, was maintained fixed. The resulting chitin derivatives were characterized using various techniques. Under optimized conditions, modified chitin derivatives exhibiting a distinct degree of carboxymethylation and acetylation were obtained. Structural features, morphology, and properties are discussed in relation to the chemical structure of the chitin derivatives. For electrolyte applications, the ionic conductivity increased by three magnitudes from 10−9 S·cm−1 for unmodified chitin to 10−6 S·cm−1 for modified chitin with the highest degree of acetylation. Interestingly, the chitin derivatives formed free-standing films with and without the addition of up to 60% of ionic liquid, the ionic conductivity of the obtained solid electrolyte system reaching the value of 10−3 S·cm−1.

Ultrastructural identification of three types of sensory setae on copepod antennae

1995 ◽  
Vol 53 ◽  
pp. 956-957
Author(s):  
T. M. Weatherby ◽  
P.H. Lenz
Keyword(s):  
Phase Locking ◽  
Membrane Surface ◽  
Reaction Times ◽  
High Sensitivity ◽  
Structural Features ◽  
Calanoid Copepods ◽  
Marine Food Webs ◽  
Dendritic Membrane ◽  
Ultrastructural Characterization

Crustaceans, as well as other arthropods, are covered with sensory setae and hairs, including mechanoand chemosensory sensillae with a ciliary origin. Calanoid copepods are small planktonic crustaceans forming a major link in marine food webs. In conjunction with behavioral and physiological studies of the antennae of calanoids, we undertook the ultrastructural characterization of sensory setae on the antennae of Pleuromamma xiphias.Distal mechanoreceptive setae exhibit exceptional behavioral and physiological performance characteristics: high sensitivity (<10 nm displacements), fast reaction times (<1 msec latency) and phase locking to high frequencies (1-2 kHz). Unusual structural features of the mechanoreceptors are likely to be related to their physiological sensitivity. These features include a large number (up to 3000) of microtubules in each sensory cell dendrite, arising from or anchored to electron dense rods associated with the ciliary basal body microtubule doublets. The microtubules are arranged in a regular array, with bridges between and within rows. These bundles of microtubules extend far into each mechanoreceptive seta and terminate in a staggered fashion along the dendritic membrane, contacting a large membrane surface area and providing a large potential site of mechanotransduction.

scholarly journals Copper(II) 2,2-Bis(Hydroxymethyl)Propionate Coordination Compounds with Hexamethylenetetramine: From Mononuclear Complex to One-Dimensional Coordination Polymer

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3358
Author(s):  
Sadaf Rauf ◽  
Agata Trzesowska-Kruszynska ◽  
Tomasz Sierański ◽  
Marcin Świątkowski
Keyword(s):  
Coordination Polymer ◽  
Coordination Compounds ◽  
Structural Diversity ◽  
Structural Features ◽  
Mononuclear Complex ◽  
Molar Ratio ◽  
One Dimensional ◽  
1D Coordination Polymer ◽  
Copper Coordination ◽  
Stretching Vibrations

Three new copper coordination compounds derived from 2,2-bis(hydroxymethyl)propionic acid (dmpa) and hexamethylenetetramine (hmta) were obtained and their crystal structures were determined. The stoichiometry of the reagents applied in the syntheses reflects the metal to ligand molar ratio in the formed solid products. Due to the multiple coordination modes of the used ligands, wide structural diversity was achieved among synthesized compounds, i.e., mononuclear [Cu(dmp)2(hmta)2(H2O)] (1), dinuclear [Cu2(dmp)4(hmta)2] (2), and 1D coordination polymer [Cu2(dmp)4(hmta)]n (3). Their supramolecular structures are governed by O—H•••O and O—H•••N hydrogen bonds. The compounds were characterized in terms of absorption (UV-Vis and IR) and thermal properties. The relationships between structural features and properties were discussed in detail. Owing to discrepancies in the coordination mode of a dmp ligand, bidentate chelating in 1, and bidentate bridging in 2 and 3, there is a noticeable change in the position of the bands corresponding to the stretching vibrations of the carboxylate group in the IR spectra. The differences in the structures of the compounds are also reflected in the nature and position of the UV-Vis absorption maxima, which are located at lower wavelengths for 1.

A novel separation method of the valuable components for activated clay production wastewater

2021 ◽  
Vol 19 (1) ◽  
pp. 530-540
Author(s):  
Lvshan Zhou ◽  
Tongjiang Peng ◽  
Hongjuan Sun ◽  
Dong Fu ◽  
Chuan Lai
Keyword(s):  
Aluminum Phosphate ◽  
Iron Phosphate ◽  
Acid Sites ◽  
Precipitation Method ◽  
Molar Ratio ◽  
Precipitation Process ◽  
Iron Aluminum ◽  
Phosphorus Iron ◽  
Optimized Conditions ◽  
Acidic Wastewater

Abstract The acidic wastewater produced by the wet production of activated clay contains valuable components such as iron and aluminum. The precipitation method was successfully introduced to separate iron and aluminum from the activated clay production wastewater step by step, which can not only recover the valuable components, but also avoid environmental pollution. In the separation process, gypsum, iron aluminum phosphate, alumina, and sodium sulfate were prepared, and the phase compositions of separation products were analyzed by XRD and IR. The main influencing factors in the separation of iron and aluminum components were studied by single factor experiment. The results show that at the optimized conditions, phosphorus/iron molar ratio 6.0, the system pH 3.0, the reaction temperature 343 K, and the reaction time 90 min, the iron(iii) ion in the system can form a sodium-containing aluminum iron phosphate double salt, and the filtrate after separating Fe3+ and part of Al3+ can meet the requirements for forming high-purity Al2O3. During the phosphate precipitation process, the hypothesis should be correct that Al3+ reacts with PO 4 3 − {\text{PO}}_{4}^{3-} to form an AlPO4 skeleton, Fe3+ isomorphically replaces Al3+ in the [AlO4] tetrahedron, and adsorption occurs simultaneously, with Na+ occupying the terminal acid sites, P(Al)–OH.

scholarly journals Structure-Acid Lability Relationship of N-alkylated α,α-dialkylglycine Obtained via a Ugi Multicomponent Reaction

Molecules ◽  
2021 ◽  
Vol 26 (1) ◽  
pp. 197
Author(s):  
Iván Ramos-Tomillero ◽  
Marisa K. Sánchez ◽  
Hortensia Rodríguez ◽  
Fernando Albericio
Keyword(s):  
Solid Phase Synthesis ◽  
Solid Phase ◽  
Structural Features ◽  
Amide Bond ◽  
Acidic Media ◽  
Phase Synthesis ◽  
Acyl Chains ◽  
Cyclic Compounds ◽  
Relationship Of ◽  
Fine Tune

Using the classical Ugi four-component reaction to fuse an amine, ketone, carboxylic acid, and isocyanide, here we prepared a short library of N-alkylated α,α-dialkylglycine derivatives. Due to the polyfunctionality of the dipeptidic scaffold, this highly steric hindered system shows an interesting acidolytic cleavage of the C-terminal amide. In this regard, we studied the structure-acid lability relationship of the C-terminal amide bond (cyclohexylamide) of N-alkylated α,α-dialkylglycine amides 1a–n in acidic media and, afterward, it was established that the most important structural features related to its cleavage. Then, it was demonstrated that electron-donating effects in the aromatic amines, flexible acyl chains (Gly) at the N-terminal and the introduction of cyclic compounds into dipeptide scaffolds, increased the rate of acidolysis. All these effects are related to the ease with which the oxazolonium ion intermediate forms and they promote the proximity of the central carbonyl group to the C-terminal amide, resulting in C-terminal amide cleavage. Consequently, these findings could be applied for the design of new protecting groups, handles for solid-phase synthesis, and linkers for conjugation, due to its easily modulable and the fact that it allows to fine tune its acid-lability.

scholarly journals Studies on biodiesel produced from Jatropha oil in Cambodia by a non-catalytic using C2H5OH

2014 ◽  
Vol 17 (2) ◽  
pp. 102-108
Author(s):  
Phuoc Van Nguyen ◽  
Chhoun Vi Thun ◽  
Quan Thanh Pham
Keyword(s):  
Catalyst Deactivation ◽  
Reaction Times ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Biodiesel Fuel ◽  
Jatropha Oil ◽  
Fuel Blend ◽  
International Standard ◽  
Astm D6751

Different technologies are currently available for biodiesel production from various kinds of lipid containing feedstock. Among them, the alkaline-catalyzed methods are the most widely studied. However, here are several disadvantages related to biodiesel production using alkaline catalysts such as generation of wastewater, catalyst deactivation, difficulty in the separation of biodiesel from catalyst and glycerin, etc. To limit the problems mentioned above, in this study, biodiesel is produced by a non-catalytic using C2H5OH. The effect of experimental variables (the molar ratio ethanol/oil of 41.18:1 – 46.82:1, reaction times of 50 - 90 minutes and reaction temperatures of 2750C - 2950C) on the yield of biodiesel was studied. The 96% yield of Cambodia biodiesel of reaction between C2H5OH and Jatropha Oil at 46:1 at temperature 2900C at 60 minutes no using catalysts. Obtained biodiesel fuel was up to the International Standard ASTM D6751 for biodiesel fuel blend stock (B100).

scholarly journals Kinetic Modelling and Optimizing of Butyl Propionate over a Synthesied Material (Tungstan Phosphoric Acid) Heteropoly Catalyst Using Response Surface Technique

2021 ◽  
Vol 45 (4) ◽  
pp. 273-280
Author(s):  
Raju Kalakuntala ◽  
Srinath Surnani
Keyword(s):  
Experimental Data ◽  
Phosphoric Acid ◽  
Response Surface ◽  
Kinetic Modelling ◽  
Quadratic Model ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Response Surface Technique ◽  
Optimized Conditions ◽  
Surface Technique

The performance of heteropoly acid i.e., Tungstan phosphoric acid for the synthesis of butyl propionate at optimized conditions. Effect on conversion and yield of propionic acids using the Response Surface Methodology (RSM) were evaluated by different process parameters including catalyst loading, alcohol/acid molar ratio. There were no external and internal mass transmission limits. A quadratic model acquired by the variance study (ANOVA) has been shown to view experimental data successfully with the regression (R2 = 0.94 and R2 = 0.942) coefficients approaching to unity. The pseudo homogeneous kinetic model (PH) validated with experimental data to determine kinetic parameters i.e., activation energy (45.97 kJ/mol) and frequent factor (91319 L/mol-min).

Efficient synthesis of pyrido[2,3-d]pyrimidine-7-carboxylic acids catalyzed by a TiO2/SiO2 nanocomposite in aqueous media at room temperature

2018 ◽  
Vol 73 (9) ◽  
pp. 641-645 ◽  
Author(s):  
Sepehr Sadegh-Samiei ◽  
Shahrzad Abdolmohammadi
Keyword(s):  
Heterogeneous Catalyst ◽  
Carboxylic Acids ◽  
Room Temperature ◽  
Aqueous Media ◽  
Reaction Times ◽  
Molar Ratio ◽  
Efficient Synthesis ◽  
Reaction Conditions ◽  
Moderate Reaction ◽  
Recyclable Heterogeneous Catalyst

AbstractA novel and efficient synthesis of eight 5-aryl-1,3-dimethyl-2,4-dioxo-1,2,3,4,5,8-hexahydropyrido[2,3-d]pyrimidine-7-carboxylic acids using a TiO2/SiO2 nanocomposite with a molar ratio of 1:1 as a recyclable heterogeneous catalyst is described. The desired products, five of which are new, are formed in short reaction times (2–3 h) with high to excellent yields (94%–98%) under very moderate reaction conditions (room temperature, aqueous media).

scholarly journals Free-standing Li+-conductive films based on PEO–PVDF blends

RSC Advances ◽  
2020 ◽  
Vol 10 (27) ◽  
pp. 16118-16124
Author(s):  
Elena E. Ushakova ◽  
Artem V. Sergeev ◽  
Artem Morzhukhin ◽  
Filipp S. Napolskiy ◽  
Olga Kristavchuk ◽  
...  
Keyword(s):  
Ionic Conductivity ◽  
Solid Electrolytes ◽  
Free Standing ◽  
Conductive Films ◽  
P Addition

Addition of PVDF to LiTFSI–PEO solid electrolytes enables preparation of free-standing films with the compositions within the so called “crystallinity gap” of LiTFSI–PEO system. Such films possess ionic conductivity of about 0.3 mS cm−1 at 60 °C.

Low Temperature Hydrothermal Synthesis of Nanophase BaTiO3 and BaFe12O19 Powders

1996 ◽  
Vol 457 ◽  
Author(s):  
Fatih Dogan ◽  
Shawn O'rourke ◽  
Mao-Xu Qian ◽  
Mehmet Sarikaya
Keyword(s):  
Particle Size ◽  
Hydrothermal Reaction ◽  
Average Particle Size ◽  
Reaction Times ◽  
Nanocrystalline Powders ◽  
Molar Ratio ◽  
Average Particle ◽  
Hydrothermal Conditions ◽  
Processing Variables ◽  
Xrd And Tem

ABSTRACTNanocrystalline powders with an average particle size of 50 nm has been synthesized in two materials systems under hydrothermal conditions below 100°C. Processing variables, such as temperature, concentration and molar ratio of reactants and reaction time were optimized to obtain particles of reduced size and stoichiometric compositions. Hydrothermal reaction takes place between Ba(OH)2 solution and titanium/iron precursors in sealed polyethylene bottles in the BaTiO3 and BaFe12O19 systems, respectively. While crystalline BaTiO3 forms relatively fast within a few hours, formation of fully crystalline and stoichiometric BaFei20i9 require considerably longer reaction times up to several weeks and strongly dependent on the Ba:Fe ratio of the precursors. The structural and compositional evaluation of the nanophase powders were studied by XRD and TEM techniques.

scholarly journals Lipase NS81006 immobilized on Fe3O4 magnetic nanoparticles for biodiesel production

2016 ◽  
Vol 27 (1) ◽  
pp. 13-21 ◽  
Author(s):  
Baskar Thangaraj ◽  
Zhaohua Jia ◽  
Lingmei Dai ◽  
Dehua Liu ◽  
Wei Du
Keyword(s):  
Magnetic Nanoparticles ◽  
Immobilized Lipase ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Fe3o4 Magnetic Nanoparticles ◽  
Time Duration ◽  
Fast Reaction ◽  
Functionalized Magnetic Nanoparticles ◽  
Optimized Conditions ◽  
Free Lipase

Abstract Lipase-catalyzed biodiesel production is being the object of extensive research due to the demerits of chemical based catalytic system. Lipase immobilized on Fe3O4 magnetic nanoparticles has the integrated advantages of traditional immobilized lipase and free lipase for its rather fast reaction rate and easy separation. It has been demonstrated that free lipase NS81006 has potential in catalyzing the alcoholysis of renewable oils for biodiesel preparation. In this study, Fe3O4 magnetic nanoparticles functionalized with organosilane compounds like (3-aminopropyl)triethyloxysilane (APTES) and (3-mercaptopropyl)trimethoxysilane) MPTMS were used as carriers for lipase immobilization. Lipase NS81006 was covalently bound to the organosilane-functionalized magnetic nanoparticles by using glutaraldehyde cross-linking reagent. A biodiesel yield of 89% and 81% could be achieved by lipase immobilized on APTES-Fe3O4 and MPTMS-Fe3O4 magnetic nanoparticles respectively under optimized conditions of oil to methanol molar ratio 1:3 with three step addition of methanol, reaction temperature 45°C and reaction time duration 12 h. The lipases immobilized on magnetic nanoparticles could be recovered easily by external magnetic field for further use.

Sign in / Sign up

Export Citation Format

Share Document