scholarly journals Effect of Alkyl Chain Length in POSS Nanocage on Non-Isothermal Crystallization Behavior of PCL/Amino-POSS Nanocomposites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1719 ◽  
Author(s):  
Fernández ◽  
Guzmán ◽  
Ramos ◽  
Fernández
Keyword(s):  
Size Distribution ◽  
Crystallization Temperature ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Degree Of Crystallinity ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Scanning Calorimetry ◽  
Oligomeric Silsesquioxane

The study of the non-isothermal crystallization behavior of polymers is of great importance due to the effect of degree of crystallinity and crystallization process on the polymer properties. The effect of aminopropylisobutyl polyhedral oligomeric silsesquioxane (APIBPOSS) and aminopropylisooctyl polyhedral oligomeric silsesquioxane (APIOPOSS) on poly(ε-caprolactone) (PCL) crystallization is studied by differential scanning calorimetry (DSC) under non-isothermal conditions and polarized optical microscopy (POM). The crystallization kinetics is analyzed using the Avrami and Mo models, and effective activation energies are evaluated by the Friedman isoconversional method. The results show that the compatibility between polyhedral oligomeric silsesquioxanes (POSS) and PCL and POSS loading affect the crystallization process. A higher crystallization temperature, a narrower size distribution of crystallite, and a faster crystallization rate are obtained in the presence of all the studied contents of APIBPOSS and at lower contents of APIOPOSS. At APIOPOSS contents higher than 2 wt %, the crystallization temperature is lowered, the size distribution of crystallite is broadened, and the crystallization process is retarded. The presence of POSS leads to an increase in the number of nucleation sites, and a reduction in the size of the crystallite and the overall degree of crystallinity, as a result of the confinement of PCL chains caused by POSS nanoparticles.

Investigating the Effect of Nanoclay Loadings and Re-Processing on the Melting and Crystallization Behavior of PP/Clay Nanocomposites

2019 ◽  
Vol 951 ◽  
pp. 21-25
Author(s):  
Achmad Chafidz ◽  
Sholeh Ma'mun ◽  
Haryanto ◽  
Wara Dyah Pita Rengga ◽  
Prima A. Handayani ◽  
...  
Keyword(s):  
Crystallization Behavior ◽  
Crystallization Process ◽  
The Other ◽  
Degree Of Crystallinity ◽  
Clay Nanocomposites ◽  
Scanning Calorimetry ◽  
Onset Crystallization Temperature ◽  
Significant Difference ◽  
The Degree Of Crystallinity ◽  
Melting And Crystallization

In this study, PP/clay nanocomposites have been fabricated at different nanoclay loadings, i.e. 0, 5, 10, and 5 wt% for the 1stcycle and 2ndcycle (re-processing). The prepared nanocomposites were then characterized by a Differential Scanning Calorimetry (DSC) to investigate the effects of nanoclay loadings and re-processing on the melting and crystallization of the nanocomposites. The DSC results showed that the melting temperature,Tmwas not significantly affected by the nanoclay loadings and re-processing. In the other hand, the degree of crystallinity,Xcof the nanocomposites was higher than that of neat PP, but only reached a maximum at nanoclay loading of 5 wt% (i.e. 51.2% for NC-5-I and 48.3% for NC-5-II). Thereafter, theXcdecreased at higher nanoclay loadings. There was no significant difference inXcbetween 1stcycle and 2ndcycle. Additionally, in all nanocomposites samples for both cycles, there were two crystallization temperatures, i.e.Tc1andTc2. In the overall crystallization process, theTcof nanocomposites increased by 11-12°C compared to that of neat PP. Whereas, the onset crystallization temperature,Tocalso increased by approx. 13°C. Apparently, there was no significant effect of nanoclay loadings and re-processing on theTcndTocof the nanocomposites.

scholarly journals The effect of polyhedral oligomeric silsesquioxanes (POSSs) incorporation in ethylene-propylene-diene-terpolymer (EPDM): a thermal study

2021 ◽  
Author(s):  
Ignazio Blanco ◽  
Traian Zaharescu
Keyword(s):  
Room Temperature ◽  
Thermal Characterization ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Dsc Analysis ◽  
Γ Irradiation ◽  
Scanning Calorimetry ◽  
Ethylene Propylene ◽  
Oligomeric Silsesquioxane ◽  
Ethylene Propylene Diene Terpolymer ◽  
Dynamic Heating

AbstractA series of ethylene-propylene-diene-terpolymer (EPDM)/polyhedral oligomeric silsesquioxane (POSS) composites at different percentage of POSS were prepared and subjected to γ-irradiation. Both irradiated and non-irradiated EPDM and composites were investigated by the means of thermal analysis to verify if the presence of POSS molecules is able to reduce the oxidation level of free radicals generated during the degradation and to evaluate the effects of the irradiation. EPDM composites at 1, 3 and 5 mass% of POSS were thus degraded in a thermogravimetric (TG) balance in dynamic heating conditions (25–700 °C), in both inert and oxidative atmosphere by flowing nitrogen and air respectively. Thermal characterization was then completed by carrying out Differential Scanning Calorimetry (DSC) analysis from sub-ambient to better highlight the melting of the polymer and polymer composites occurring just above the room temperature. FTIR spectroscopy was also performed for the prepared samples to check the presence of the molecular filler in the composites and for the TG’s residue at 700 °C, in order to evaluate its nature. DSC and TGA parameters were detected and discussed to have information about the effect of the degradation’s environment, the effect of irradiation on polymer stabilization and the effect of POSS content in the polymer matrix.

The effect of cooling rate on crystallization behavior and tensile properties of CF/PEEK composites

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Guangming Dai ◽  
Lihua Zhan ◽  
Chenglong Guan ◽  
Minghui Huang
Keyword(s):  
Cooling Rate ◽  
Crystallization Temperature ◽  
Crystallization Behavior ◽  
Crystalline Polymer ◽  
Scanning Calorimetry ◽  
Nonisothermal Crystallization ◽  
Cooling Rates ◽  
Control Range ◽  
Temperature Range ◽  
Transverse Tensile

Abstract In this study, the differential scanning calorimetry (DSC) tests were performed to measure the nonisothermal crystallization behavior of carbon fiber reinforced polyether ether ketone (CF/PEEK) composites under different cooling rates. The characteristic parameters of crystallization were obtained, and the nonisothermal crystallization model was established. The crystallization temperature range of the material at different cooling rates was predicted by the model. The unidirectional laminates were fabricated at different cooling rates in the crystallization temperature range. The results showed that the crystallization temperature range shifted to a lower temperature with the increase of cooling rate, the established nonisothermal crystallization model was consistent with the DSC test results. It is feasible to shorten the cooling control range from the whole process to the crystallization range. The crystallinity and transverse tensile strength declined significantly with the increase of the cooling rate in the crystallization temperature range. The research results provided theoretical support for the selection of cooling conditions and temperature control range, which could be applied to the thermoforming process of semi-crystalline polymer matrixed composites to improve the manufacturing efficiency.

The non-isothermal crystallization behavior of polyamide 6 and polyamide 6/HDPE/MAH/L-101 composites

2019 ◽  
Vol 39 (2) ◽  
pp. 124-133 ◽  
Author(s):  
Bingxiao Liu ◽  
Guosheng Hu ◽  
Jingting Zhang ◽  
Zhongqiang Wang
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Isothermal Condition ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Analysis And Design ◽  
Processing Techniques

AbstractStudy of the crystallization kinetics is particularly necessary for the analysis and design of processing operations, especially the non-isothermal crystallization behavior, which is due to the fact that most practical processing techniques are carried out under non-isothermal conditions. The non-isothermal crystallization behaviors of polyamide 6 (PA6) and PA6/high-density polyethylene/maleic anhydride/2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (PA6/HDPE/MAH/L-101) composites were investigated by differential scanning calorimetry (DSC). The crystallization kinetics under non-isothermal condition was analyzed by the Jeziorny and Mo equations, and the activation energy was determined by the Kissinger and Takhor methods. The crystal structure and morphology were analyzed by wide-angle X-ray diffraction (WXRD) and polarized optical microscopy (POM). The results indicate that PA6/HDPE/MAH/L-101 has higher crystallization temperature and crystallization rate, which is explained as due to its heterogeneous nuclei.

scholarly journals Thermal Properties and Non-Isothermal Crystallization Kinetics of Poly (δ-Valerolactone) and Poly (δ-Valerolactone)/Titanium Dioxide Nanocomposites

Crystals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 452 ◽  
Author(s):  
Waseem Saeed ◽  
Abdel-Basit Al-Odayni ◽  
Abdulaziz Alghamdi ◽  
Ali Alrahlah ◽  
Taieb Aouak
Keyword(s):  
Titanium Dioxide ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Three Dimensional ◽  
Degree Of Crystallinity ◽  
Simultaneous Occurrence ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
The Stability ◽  
Kinetics Of

New poly (δ-valerolactone)/titanium dioxide (PDVL/TiO2) nanocomposites with different TiO2 nanoparticle loadings were prepared by the solvent-casting method and characterized by Fourier transform infra-red, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy, and thermogravimetry analyses. The results obtained reveal good dispersion of TiO2 nanoparticles in the polymer matrix and non-formation of new crystalline structures indicating the stability of the crystallinity of TiO2 in the composite. A significant increase in the degree of crystallinity was observed with increasing TiO2 content. The non-isothermal crystallization kinetics of the PDVL/TiO2 system indicate that the crystallization process involves the simultaneous occurrence of two- and three-dimensional spherulitic growths. The thermal degradation analysis of this nanocomposite reveals a significant improvement in the thermal stability with increasing TiO2 loading.

scholarly journals The effect of isothermal crystallization on mechanical properties of poly(ethylene 2,5-furandicarboxylate)

e-Polymers ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 1-11
Author(s):  
Wei Zhang ◽  
Qingyin Wang ◽  
Gongying Wang ◽  
Shaoying Liu
Keyword(s):  
Mechanical Properties ◽  
Intrinsic Viscosity ◽  
Crystallization Temperature ◽  
Isothermal Crystallization ◽  
Tensile Modulus ◽  
Optical Microscope ◽  
Crystallization Time ◽  
Scanning Calorimetry ◽  
Crystallization Properties ◽  
Poly Ethylene

Abstract The effects of isothermal crystallization temperature/time on mechanical properties of bio-based polyester poly(ethylene 2,5-furandicarboxylate) (PEF) were investigated. The intrinsic viscosity, crystallization properties, thermal properties, and microstructure of PEF were characterized using ubbelohde viscometer, X-ray diffraction, polarizing optical microscope, differential scanning calorimetry, and scanning electron microscopy. The PEF sample isothermal crystallized at various temperatures for various times was denoted as PEF-T-t. The results showed that the isothermal crystallization temperature affected the mechanical properties of PEF-T-30 by simultaneously affecting its crystallization properties and intrinsic viscosity. The isothermal crystallization time only affected the crystallization properties of PEF-110-t. The crystallinity of PEF-110-40 was 17.1%. With small crystal size, poor regularity, and α′-crystal, PEF-110-40 can absorb the energy generated in the tensile process to the maximum extent. Therefore, the best mechanical properties can be obtained for PEF-110-40 with the tensile strength of 43.55 MPa, the tensile modulus of 1,296 MPa, and the elongation at a break of 13.36%.

Isothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica Nanocomposites

2012 ◽  
Vol 268-270 ◽  
pp. 37-40 ◽  
Author(s):  
Yan Hua Cai
Keyword(s):  
Lactic Acid ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Nucleating Agent ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Silica Nanocomposites ◽  
Induction Periods ◽  
Sio2 Nanocomposites ◽  
Different Content

The Poly(L-lactic acid)(PLLA)/surface-grafting silica(g-SiO2) nanocomposites were prepared by melt blending. The isothermal crystallization behavior of PLLA/g-SiO2 nanocomposites with different content of g-SiO2 was investigated by optical depolarizer. In isothermal crystallization from melt, the induction periods and half times for overall PLLA crystallization (95°C Tc 120°C) were affected by the crystallization temperature and the content of g-SiO2 in nanocomposites. The results showed that g-SiO2 as a kind of heterogeneous nucleating agent can reduce induction periods and half times for overall PLLA crystallization. The thermal properties of PLLA/g-SiO2 samples were also investigated by differential scanning calorimetry (DSC), The results showed that the crystalline degree of PLLA was improved as the presence of g-SiO2.

Crystallization Behavior of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2012 ◽  
Vol 184-185 ◽  
pp. 932-935
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
Crystallization Process ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Lower Content ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Montmorillonite Nanocomposites

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The crystallization behavior of PE/MMT nanocomposites at different MMT concentrations (from 0.1 to 1.2 wt %) were investigated by differential scanning calorimetry (DSC). The equilibrium melting points increase by the addition of MMT. The crystallization rates of PE/MMT nanocomposites are faster than those of pure PE. The addition of MMT facilitated the crystallization of PE, with the MMT functioning as a heterogeneous nucleating agent at lower content; at higher concentrations, however, the physical hindrance of the MMT layers to the motion of PE chains retarded the crystallization process.

Crystalline Morphology and Crystallization Behavior of Poly(Trimethylene Terephthalate)/Functionalized Graphene Oxide Nanocomposites Prepared by Melt Compounding

2019 ◽  
Vol 814 ◽  
pp. 96-101
Author(s):  
Kun Yan Wang
Keyword(s):  
Graphene Oxide ◽  
Crystallization Behavior ◽  
Optical Microscope ◽  
Degree Of Crystallinity ◽  
Functionalized Graphene ◽  
Crystalline Morphology ◽  
Scanning Calorimetry ◽  
Functionalized Graphene Oxide ◽  
Melt Compounding ◽  
Trimethylene Terephthalate

Poly (trimethylene terephthalate) (PTT)/functionalized graphene oxide (fGO) nanocomposites were prepared by melt compounding. The crystalline morphology and crystallization behavior of PTT/fGO with different amounts of fGO were investigated by differential scanning calorimetry (DSC) and polarizing optical microscope (POM). The results show that the crystallization peak shifts to higher temperature after adding fGO, indicating that fGO have a nucleating effect on PTT. The crystallization temperature of nanocomposites increases with increasing content of fGO. The XRD pattern of PTT/fGO nanocomposites almost no change that indicated the degree of crystallinity of the PTT matrix remained unaffected by the addition of fGO. The nanocomposite revealed integrated Maltese crossed spherulitic morphologies. When adding 1% fGO to the PTT, big-sized PTT spherulites occurred and small-sized PTT spherulites were formed around the big-sized PTT spherulites which indicated that the mechanism of nucleation is changed.

Sign in / Sign up

Export Citation Format

Share Document