scholarly journals Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1597 ◽  
Author(s):  
Suhyun Lee ◽  
Kwangduk Ko ◽  
Jiho Youk ◽  
Daeyoung Lim ◽  
Wonyoung Jeong
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Polyamide 6 ◽  
Short Fiber ◽  
Short Fibers ◽  
Optimum Conditions ◽  
Mechanical And Electrical Properties ◽  
Functional Composites ◽  
The Matrix

In this study, carbon nanotubes (CNTs) were introduced into carbon fiber (CF) wet-laid composites as functional nano-fillers to fabricate multi-functional composites with improved mechanical, electrical, and thermal properties. It was considered that the wet-laid process was most suitable in order to introduce filler into brittle and rigid carbon fiber substrates, and we established the conditions of the process that could impart dispersibility and bonding between the fibers. We introduced polyamide 6 (PA6) short fiber, which is the same polymeric material as the stacking film, into carbon fiber and CNT mixture to enhance the binding interactions between carbon fiber and CNTs. Various types of CNT-reinforced carbon fiber wet-laid composites with PA6 short fibers were prepared, and the morphology, mechanical and electrical properties of the composites were estimated. As CNT was added to the carbon fiber nonwoven, the electrical conductivity increased by 500% but the tensile strength decreased slightly. By introducing short fibers of the same material as the matrix between CNT–CF wet-laid nonwovens, it was possible to find optimum conditions to increase the electrical conductivity while maintaining mechanical properties.

scholarly journals Assessing the Flexural Properties of Epoxy Composites with Extremely Low Addition of Cellulose Nanofiber Content

2020 ◽  
Vol 10 (3) ◽  
pp. 1159 ◽  
Author(s):  
Yingmei Xie ◽  
Hiroki Kurita ◽  
Ryugo Ishigami ◽  
Fumio Narita
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Flexural Modulus ◽  
Strengthening Mechanism ◽  
Short Fiber ◽  
Cellulose Nanofiber ◽  
Resin Matrix ◽  
Element Analysis ◽  
Epoxy Resin Matrix ◽  
The Matrix

Epoxy resins are a widely used common polymer due to their excellent mechanical properties. On the other hand, cellulose nanofiber (CNF) is one of the new generation of fibers, and recent test results show that CNF reinforced polymers have high mechanical properties. It has also been reported that an extremely low CNF addition increases the mechanical properties of the matrix resin. In this study, we prepared extremely-low CNF (~1 wt.%) reinforced epoxy resin matrix (epoxy-CNF) composites, and tried to understand the strengthening mechanism of the epoxy-CNF composite through the three-point flexural test, finite element analysis (FEA), and discussion based on organic chemistry. The flexural modulus and strength were significantly increased by the extremely low CNF addition (less than 0.2 wt.%), although the theories for short-fiber-reinforced composites cannot explain the strengthening mechanism of the epoxy-CNF composite. Hence, we propose the possibility that CNF behaves as an auxiliary agent to enhance the structure of the epoxy molecule, and not as a reinforcing fiber in the epoxy resin matrix.

Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior

2017 ◽  
Vol 52 (11) ◽  
pp. 1495-1503 ◽  
Author(s):  
K Hamdi ◽  
Z Aboura ◽  
W Harizi ◽  
K Khellil
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Carbon Black ◽  
Electrical Current ◽  
Polyamide 6 ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This work tends to characterize the effect of carbon black nanofillers on the properties of the woven carbon fiber reinforced thermoplastic polymers. First of all, composites from nanofilled Polyamide 6 resin reinforced by carbon fibers were fabricated. Scanning electron microscopy observations were performed to localize the nanoparticles and showed that particles penetrated the fiber zone. In fact, by reaching this zone, the carbon black nanofillers create a connectivity's network between fibers, which produces an easy pathway for the electrical current. It explains the noticed improvement of the electrical conductivity of the carbon black nanofilled composites. Electrical conductivity of neat matrix composite passed from 20 to 80 S/cm by adding 8 wt% of carbon black and to 140 S/cm by adding 16 wt% of the same nanofiller. The addition of nanofillers modifies the heating and cooling laws of carbon fiber reinforced polymer: the nanofilled carbon fiber reinforced polymer with 16 wt% is the most conductive so it heats less. Based on these results, the use of the composite itself as an indicator of this mechanical state might be possible. In fact, the study of the influence of a mechanical loading on the electrical properties of the composite by recording the variance of an electrical set is possible.

Mechanical and Electrical Properties of Carbon Nanotube / Polydimethylsiloxane Composites Yarn

2016 ◽  
Vol 11 (4) ◽  
pp. 155892501601100 ◽  
Author(s):  
Wei Liu ◽  
Fujun Xu ◽  
Nianhua Zhu ◽  
Shuang Wang
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Electrical Properties ◽  
Strain Sensors ◽  
Electromechanical Properties ◽  
Average Strength ◽  
Mechanical And Electrical Properties ◽  
Carbon Nano Tube ◽  
Droplet Infiltration

Carbon nano tube (CNT) yarn is an axially aligned CNT assembly. It has great potential many applications. In this study, the mechanical and electrical properties of the aerogel-spun CNT yarns and CNT/Polydimethylsiloxane (PDMS) composite yarns were investigated. The CNT/PDMS yarn was fabricated by droplet infiltration of PDMS solution into the aerogel-spun CNT yarn. The mechanical properties of the CNT/PDMS yarns were significantly improved with an average strength of 837.29 MPa and modulus of 3.66 GPa, over 100% improvement compared to the original CNT yarns. The electrical conductivity of the CNT/PDMS yarn increased from 1636 S/cm to 3555 S/cm. The electromechanical properties of CNT/PDMS yarns demonstrated that such CNT yarn could be suitable for strain sensors.

Effect of Fiber Volume Fraction on High Temperature Creep of Al2O3-SiO2(sf)/AZ91D Composite

2011 ◽  
Vol 474-476 ◽  
pp. 548-552
Author(s):  
Jun Tian
Keyword(s):  
Creep Resistance ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Matrix Alloy ◽  
Short Fiber ◽  
Tensile Creep ◽  
Short Fibers ◽  
Creep Tests ◽  
Fiber Volume ◽  
The Matrix

Constant stress tensile creep tests were conducted on AZ91D–20 vol.%, 25 vol.%, and 30 vol.% Al2O3-SiO2short fiber composites and on an unreinforced AZ91D matrix alloy. The creep resistance of the reinforced materials is shown to be considerably improved compared with the matrix alloy. With the increasing volume fraction of short fibers, the creep resistance of AZ91D composites is improved, and their creep threshold stresses are also increased accordingly. Because of the increasing volume fraction of short fibers, loads of bearing and transmission of short fibers will increase, and thus the creep resistance of AZ91D composites further improves, but the precipitation of β-Mg17Al12precipitate increases in the number, it is easy to soften coarse, so that threshold stress of AZ91D composite does not increase greatly.

Preparation of MWCNT/Carbon Fabric Reinforced Hybrid Nanocomposite and Examination of its Mechanical Properties

2008 ◽  
Vol 589 ◽  
pp. 269-274 ◽  
Author(s):  
Gábor Romhány ◽  
Gábor Szebényi
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Hybrid Composite ◽  
Tensile Tests ◽  
Hybrid Nanocomposite ◽  
Shear Rates ◽  
The Matrix ◽  
Interlaminar Shear ◽  
Carbon Fiber Epoxy

In our work we have prepared carbon fiber/epoxy composite and carbon fiber/carbon nanotube/epoxy hybrid nanocomposite laminates by hand laminating assisted by vacuumbag technology. During the production of the specimens we have encountered the viscosity increasing effect of nanotube filling, which we characterized by a viscosity test. The results of the test showed, that in the lowest shear rate range carbon nanotube filling can cause an increase of viscosity by three orders of magnitude, but also at higher shear rates the viscosity of the nanotube filled epoxy resin was ten times the viscosity of the unfilled resin. Mechanical properties of the composite and hybrid composite have been compared by tensile, bending and interlaminar shear tests. During the tensile tests AE signals have also been recorded. The fracture surfaces have been examined by SEM micrographs. The nanotube filling has decreased the tensile strength and the modulus of elasticity by 7-8 percent presumably indirectly, the bending properties didn’t change noticeably, but the interlaminar shear strength of the composite has increased by 15 percent thanks to nanotube filling of the matrix. The decrease of the delamination inclination of the hybrid composite has been affirmed both by the AE and SEM results.

Sign in / Sign up

Export Citation Format

Share Document