scholarly journals Influence of Nano Titanium Dioxide and Clove Oil on Chitosan–Starch Film Characteristics

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1418 ◽  
Author(s):  
Wei Li ◽  
Kewang Zheng ◽  
Hujian Chen ◽  
Shirong Feng ◽  
Wei Wang ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Water Vapour ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Clove Oil ◽  
Vapour Permeability ◽  
Physico Chemical ◽  
New Formulation ◽  
Nano Titanium Dioxide ◽  
Film Characteristics

The combined effects of nano titanium dioxide (TiO2-N) and clove oil (CO) on the physico-chemical, biological and structural properties of chitosan (CH)/starch (ST) films were investigated by using a solvent casting method. Results indicated that the incorporation of TiO2-N could improve the compactness of the film, increase the tensile strength (TS) and antioxidant activity, and decrease the water vapour permeability (WVP). As may be expected, the incorporation of CO into the film matrix decreased TS but increased the hydrophobicity as well as water vapour barrier antimicrobial and antioxidant properties. Fourier-transform infrared spectroscopy (FTIR) data supported intermolecular interactions between TiO2-N, CO and the film matrix. Use of a scanning electron microscope (SEM) showed that TiO2-N and CO were well dispersed and emulsified in the film network. Thermogravimetric (TG) and derivative thermogravimetric (DTG) curves demonstrated that TiO2-N and CO were well embedded in the film matrix, hence this blend film system could provide new formulation options for food packaging materials in the future.

Nano-titanium dioxide/basic magnesium hypochlorite-containing linear low-density polyethylene composite film on food packaging application

2020 ◽  
Vol 10 (6) ◽  
pp. 771-779
Author(s):  
Jing Deng ◽  
Qi Jue Chen ◽  
Ding Jie Chen ◽  
Luo Jie Zheng ◽  
Wen Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Titanium Dioxide ◽  
Composite Film ◽  
Food Packaging ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Nano Composite ◽  
Sensory Score ◽  
Nano Titanium Dioxide

The aim of this research was to probe the potential application of nano-titanium dioxide (TiO2)/basic magnesium hypochlorite (BMH)-containing linear low-density polyethylene (LLDPE) composite film in grape fresh-keeping. Mechanical properties, transparency, barrier performance and antibacterial activity of the nano-composite membrane were measured, and results showed that the antibacterial zone diameter of TiO2/BMH on pathogen-Aspergillus niger was 31.4 mm, with mixing ratio of BMH/TiO2 to 2:1. It was clearly shown that the synthesized nano-composite films decreased mechanical properties and transparency of the membrane, and also had a significant impact on sensory score, mass loss rate, decay rate, ascorbic acid (Vc) content and titratable acid content compared with LLDPE films. Moreover, the results revealed that the LLDPE antibacterial film can be effectively used for storing grapes, preserving the flavor of grapes and had an obviously effect in prolonging grapes’ shelf life.

scholarly journals Novel Antioxidant Packaging Films Based on Poly(ε-Caprolactone) and Almond Skin Extract: Development and Effect on the Oxidative Stability of Fried Almonds

Antioxidants ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 629 ◽  
Author(s):  
Arantzazu Valdés García ◽  
Nerea Juárez Serrano ◽  
Ana Beltrán Sanahuja ◽  
María Carmen Garrigós
Keyword(s):  
Food Packaging ◽  
Oxygen Permeability ◽  
Radical Scavenging Activity ◽  
Antioxidant Properties ◽  
Radical Scavenging ◽  
Skin Extract ◽  
Vapour Permeability ◽  
Hydrophilic Character ◽  
Dpph Radical Scavenging ◽  
Hexanal Content

Antioxidant films based on poly(ε-caprolactone) (PCL) containing almond skin extract (ASE) were developed for food packaging applications. The effect of ASE incorporation on the morphological, structural, colour, mechanical, thermal, barrier and antioxidant properties of the prepared films were evaluated. The structural, tensile and thermal properties of the films were not altered due to ASE addition. Although no significant differences were observed for the oxygen permeability of samples, some increase in water absorption and water vapour permeability was observed for active films due to the hydrophilic character of ASE phenolic compounds, suggesting the suitability of this novel packaging for fatty foods conservation. ASE conferred antioxidant properties to PCL films as determined by the DPPH radical scavenging activity. The efficiency of the developed films was evaluated by the real packaging application of fried almonds at different ASE contents (0, 3, 6 wt.%) up to 56 days at 40 °C. The evolution of peroxide and p-anisidine values, hexanal content, fatty acid profile and characteristic spectroscopy bands showed that active films improved fried almonds stability. The results suggested the potential of PCL/ASE films as sustainable and antioxidant food packaging systems to offer protection against lipid oxidation in foods.

scholarly journals Preparation and Characterization of Carboxymethyl Cellulose-Based Bioactive Composite Films Modified with Fungal Melanin and Carvacrol

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 499
Author(s):  
Łukasz Łopusiewicz ◽  
Paweł Kwiatkowski ◽  
Emilia Drozłowska ◽  
Paulina Trocer ◽  
Mateusz Kostek ◽  
...  
Keyword(s):  
Water Vapour ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Antioxidant Activities ◽  
Antioxidant Properties ◽  
Composite Films ◽  
Barrier Properties ◽  
Good Potential ◽  
Fungal Melanin ◽  
Spectroscopy Studies

Preparation of biodegradable packaging materials and valorisation of food industry residues to achieve “zero waste” goals is still a major challenge. Herein, biopolymer-based (carboxymethyl cellulose—CMC) bioactive films were prepared by the addition, alone or in combination, of carvacrol and fungal melanin isolated from champignon mushroom (Agaricus bisporus) agro-industrial residues. The mechanical, optical, thermal, water vapour, and UV-Vis barrier properties were studied. Fourier-transform infrared (FT-IR) spectroscopy studies were carried out to analyse the chemical composition of the resulting films. Antibacterial, antifungal, and antioxidant activities were also determined. Both CMC/melanin and CMC/melanin/carvacrol films showed some antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans. The addition of melanin increased the UV-blocking, mechanical, water vapour barrier, and antioxidant properties without substantially reducing the transparency of the films. The addition of carvacrol caused loss of transparency, however, composite CMC/melanin/carvacrol films showed excellent antioxidant activity and enhanced mechanical strength. The developed bioactive biopolymer films have a good potential to be green bioactive alternatives to plastic films in food packaging applications.

scholarly journals Chitosan-Zinc Oxide Composite for Active Food Packaging Applications

2018 ◽  
Vol 7 (4.30) ◽  
pp. 253 ◽  
Author(s):  
S.R. Abdul Razak ◽  
H. Basri
Keyword(s):  
Contact Angle ◽  
Zinc Oxide ◽  
Water Vapour ◽  
Food Packaging ◽  
Transmission Rate ◽  
Chitosan Film ◽  
Zno Films ◽  
One Pot ◽  
Vapour Permeability ◽  
Active Food Packaging

Chitosan-zinc oxide (C-ZnO) films were prepared by a simple one pot procedure. In order to investigate the property of C-ZnO films, two composite films were prepared by varying the loading of ZnO and compared with pure chitosan film (C). The films were characterized by various techniques such as FTIR, DSC, tensile, contact angle and water vapour permeability. FTIR analysis showed changes in hydrogen bonds band at 3351 cm-1 compared to pure chitosan film. The incorporation of ZnO in chitosan films increased the contact angle by 30.5% in C-ZnO1.0 film while water vapour transmission rate decreased by 7.8% compared to C film. From the tensile test, C-ZnO0.5 and C-ZnO1.0 films were found to be much superior by 1.5 times and 2.5 times respectively compared to bare chitosan film. Larger inhibition ring (by 47%) was exhibited by C-ZnO1.0 as compared to C-ZnO0.5 when tested against S.aureus. From the results, it is displayed that the incorporation of zinc oxide to chitosan improve their properties which also shown the potential to become a candidate for food active packaging.

scholarly journals Towards a Bioactive Food Packaging: Poly(Lactic Acid) Surface Functionalized by Chitosan Coating Embedding Clove and Argan Oils

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4500
Author(s):  
Elena Stoleru ◽  
Cornelia Vasile ◽  
Anamaria Irimia ◽  
Mihai Brebu
Keyword(s):  
Lactic Acid ◽  
Food Packaging ◽  
Radical Scavenging Activity ◽  
Antioxidant Properties ◽  
Radical Scavenging ◽  
Poly Lactic Acid ◽  
Syzygium Aromaticum ◽  
Clove Oil ◽  
Bioactive Materials ◽  
Escherichia Coli Bacteria

Here we introduce a new method aiming the immobilization of bioactive principles onto polymeric substrates, combining a surface activation and emulsion entrapment approach. Natural products with antimicrobial/antioxidant properties (essential oil from Syzygium aromaticum—clove and vegetal oil from Argania spinosa L—argan) were stabilized in emulsions with chitosan, a natural biodegradable polymer that has antimicrobial activity. The emulsions were laid on poly(lactic acid) (PLA), a synthetic biodegradable plastic from renewable resources, which was previously activated by plasma treatment. Bioactive materials were obtained, with low permeability for oxygen, high radical scavenging activity and strong inhibition of growth for Listeria monocytogenes, Salmonella Typhimurium and Escherichia coli bacteria. Clove oil was better dispersed in a more stable emulsion (no separation after six months) compared with argan oil. This leads to a compact and finely structured coating, with better overall properties. While both clove and argan oils are highly hydrophobic, the coatings showed increased hydrophilicity, especially for argan, due to preferential interactions with different functional groups in chitosan. The PLA films coated with oil-loaded chitosan showed promising results in retarding the food spoilage of meat, and especially cheese. Argan, and in particular, clove oil offered good UV protection, suitable for sterilization purposes. Therefore, using the emulsion stabilization of bioactive principles and immobilization onto plasma activated polymeric surfaces we obtained a bioactive material that combines the physical properties and the biodegradability of PLA with the antibacterial activity of chitosan and the antioxidant function of vegetal oils. This prevents microbial growth and food oxidation and could open new perspectives in the field of food packaging materials.

Development and production experience of the multilayer curtain-coated linerboard of Ji’an PM No. 3,

TAPPI Journal ◽  
2014 ◽  
Vol 13 (2) ◽  
pp. 17-25
Author(s):  
JUNMING SHU ◽  
ARTHAS YANG ◽  
PEKKA SALMINEN ◽  
HENRI VAITTINEN
Keyword(s):  
Titanium Dioxide ◽  
High Speed ◽  
Food Packaging ◽  
Production Efficiency ◽  
Positive Impact ◽  
Low Cost ◽  
Board Structure ◽  
Flexographic Printing ◽  
Curtain Coating ◽  
Coating Formulations

The Ji’an PM No. 3 is the first linerboard machine in China to use multilayer curtain coating technology. Since successful startup at the end of 2011, further development has been carried out to optimize running conditions, coating formulations, and the base paper to provide a product with satisfactory quality and lower cost to manufacture. The key challenges include designing the base board structure for the desired mechanical strength, designing the surface properties for subsequent coating operations, optimizing the high-speed running of the curtain coater to enhance production efficiency, minimizing the amount of titanium dioxide in the coating color, and balancing the coated board properties to make them suitable for both offset and flexographic printing. The pilot and mill scale results show that curtain coating has a major positive impact on brightness, while smoothness is improved mainly by the blade coating and calendering conditions. Optimization of base board properties and the blade + curtain + blade concept has resulted in the successful use of 100% recycled fiber to produce base board. The optical, mechanical, and printability properties of the final coated board meet market requirements for both offset and flexographic printing. Machine runnability is excellent at the current speed of 1000 m/min, and titanium dioxide has been eliminated in the coating formulations without affecting the coating coverage. A significant improvement in the total cost of coated white liner production has been achieved, compared to the conventional concept of using virgin fiber in the top ply. Future development will focus on combining low cost with further quality improvements to make linerboard suitable for a wider range of end-use applications, including frozen-food packaging and folding boxboard.

scholarly journals Nanocomposites for Food Packaging Applications: An Overview

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Jawad Sarfraz ◽  
Tina Gulin-Sarfraz ◽  
Julie Nilsen-Nygaard ◽  
Marit Kvalvåg Pettersen
Keyword(s):  
Polymer Nanocomposites ◽  
Circular Economy ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Nanocomposite Materials ◽  
Consumer Acceptability ◽  
Special Focus ◽  
Packaging Materials ◽  
Mechanical And Thermal Properties ◽  
Low Concentrations

There is a strong drive in industry for packaging solutions that contribute to sustainable development by targeting a circular economy, which pivots around the recyclability of the packaging materials. The aim is to reduce traditional plastic consumption and achieve high recycling efficiency while maintaining the desired barrier and mechanical properties. In this domain, packaging materials in the form of polymer nanocomposites (PNCs) can offer the desired functionalities and can be a potential replacement for complex multilayered polymer structures. There has been an increasing interest in nanocomposites for food packaging applications, with a five-fold rise in the number of published articles during the period 2010–2019. The barrier, mechanical, and thermal properties of the polymers can be significantly improved by incorporating low concentrations of nanofillers. Furthermore, antimicrobial and antioxidant properties can be introduced, which are very relevant for food packaging applications. In this review, we will present an overview of the nanocomposite materials for food packaging applications. We will briefly discuss different nanofillers, methods to incorporate them in the polymer matrix, and surface treatments, with a special focus on the barrier, antimicrobial, and antioxidant properties. On the practical side migration issues, consumer acceptability, recyclability, and toxicity aspects will also be discussed.

Sign in / Sign up

Export Citation Format

Share Document