scholarly journals Effect of Semi-Conductive Layer Modified by Magnetic Particle SrFe12O19 on Charge Injection Characteristics of HVDC Cable

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1309 ◽  
Author(s):  
Yanhui Wei ◽  
Mingyue Liu ◽  
Jiaxing Wang ◽  
Guochang Li ◽  
Chuncheng Hao ◽  
...  
Keyword(s):  
Space Charge ◽  
Magnetic Particles ◽  
Charge Injection ◽  
Direct Access ◽  
Polarization Current ◽  
Insulation Material ◽  
Conductive Layer ◽  
Depolarization Current ◽  
Steady State Current ◽  
Secondary Injection

For high voltage direct current (HVDC) cable, a semi-conductive layer lies between the conductor and the insulation layer; as the charge migrates the path from the conductor to the insulation material, it will affect space charge injection. In this work, the research idea of changing the injection path of moving charges within semi-conductive layer by magnetic particles was proposed. Semi-conductive composites with different SrFe12O19 contents of 1 wt.%, 5 wt.%, 10 wt.%, 20 wt.%, and 30 wt.% were prepared, and the amount of injected charges in the insulation sample was characterized by space charge distribution, polarization current, and thermally-stimulated depolarization current. The experimental results show that a small amount of SrFe12O19 can significantly reduce charge injection in the insulation sample, owing to the deflection of the charge migration path, and only part of the electrons can enter the insulation sample. When the content is 5 wt.%, the insulation sample has the smallest charge amount, 0.89 × 10−7 C, decreasing by 37%, and the steady-state current is 6.01 × 10−10 A, decreasing by 22%. When SrFe12O19 content exceeds 10 wt.%, the charge suppression effect is not obvious and even leads to the increase of charge amount in the insulation sample, owing to the secondary injection of charges. Most moving charges will deflect towards the horizontal direction and cannot direct access to the insulation sample, resulting in a large number of charges accumulation in the semi-conductive layer. These charges will seriously enhance the interface electric field near the insulation sample, leading to the secondary injection of charges, which are easier to inject into the insulation sample.

scholarly journals Charge Injection Characteristics of Semi-Conductive Composites with Carbon Black-Polymer for HVDC Cable

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1134 ◽  
Author(s):  
Yanhui Wei ◽  
Mingyue Liu ◽  
Wang Han ◽  
Guochang Li ◽  
Chuncheng Hao ◽  
...  
Keyword(s):  
Carbon Black ◽  
Electric Field ◽  
Bottom Electrode ◽  
Charge Injection ◽  
Experimental Results ◽  
Uniform Electric Field ◽  
Insulation Material ◽  
Electrode Structure ◽  
Depolarization Current ◽  
Conductive Composites

Semi-conductive composites composed of carbon black-polymer play an important role in uniform electric field in high voltage direct current (HVDC) cable. They also affect space charge behaviors in the insulation material. However, the charge injection characteristics of semi-conductive composites are not detailed. In this work, the electrode structure of ‘Semi-conductive composites- Insulation material- Metal bottom’ (S-I-M) is proposed, and the currents formed by injected charges from semi-conductive composites are characterized by the thermally stimulated depolarization current (TSDC) method. Further, the experimental results based on the structure of S-I-M are compared with the traditional electrode structure of M-I-M (Metal upper electrode- Insulation material- Metal bottom electrode) and the simplified cable electrode structure of MS-I-M (Metal upper electrode-Semi-conductive electrode- Insulation material- Metal bottom electrode), respectively. The experimental results show that the semi-conductive composite plays an important role in the charge injection process and it presents a different tendency under different compound modes of temperature and electric field. For the low electric field (E ≤ 5 kV/mm) and the low temperature (T ≤ 50 °C), the current caused by the accumulated charges follows the rule, IS > IMS > IM. For the low electric field and high temperature (T > 50 °C), the current caused by the injected charges follows the rule, IMS > IM > IS. This phenomenon is closely related to the interface characterization and contact barrier.

scholarly journals Influence of Temperature on Charge Accumulation in Low-Density Polyethylene Based on Depolarization Current and Space Charge Decay

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 587 ◽  
Author(s):  
Guochang Li ◽  
Jiaxing Wang ◽  
Wang Han ◽  
Yanhui Wei ◽  
Shengtao Li
Keyword(s):  
Space Charge ◽  
Charge Trapping ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Insulation Material ◽  
Charge Accumulation ◽  
Depolarization Current ◽  
Close Link ◽  
Influence Of Temperature ◽  
Influence Of Temperature On

Temperature is one of the key factors affecting space charge accumulation in high voltage direct current (HVDC) cable insulation material. The influence of temperature on charge accumulation in low density polyethylene (LDPE) has been investigated with a combined thermally stimulated depolarization current (TSDC) method and pulsed electro-acoustic (PEA) method. The experimental results indicate that there exists a transition temperature region of charge accumulation around 50 °C. The total accumulated charges all firstly increase and then decrease with the increasing polarization temperature under three typical polarization electric fields, and they have more accumulated charges in LDPE around 50 °C. The phenomenon has a close link with the dynamic processes of charge trapping and de-trapping, which were verified by TSDC results. At room temperature, the trapped charges are difficult to release from the traps, and these homocharges near the cathode can depress the further injection of the charges. More charges can be injected from the electrodes with the increase of temperature, while the charge migration is relatively lower before 50 °C, leading to more accumulated charges. When the temperature exceeds around 50 °C, the molecular movement is accelerated which can enhance the hopping probability of charges between the adjacent traps, resulting in few accumulated charges.

scholarly journals Research on the Time-Domain Dielectric Response of Multiple Impulse Voltage Aging Oil-Film Dielectrics

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1948
Author(s):  
Chenmeng Zhang ◽  
Kailin Zhao ◽  
Shijun Xie ◽  
Can Hu ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Time Domain ◽  
Dielectric Response ◽  
Early Stage ◽  
Debye Model ◽  
Polarization Current ◽  
Depolarization Current ◽  
Oil Film ◽  
Impulse Voltage ◽  
The Time Domain ◽  
Film Dielectric

Power capacitors suffer multiple impulse voltages during their lifetime. With the multiple impulse voltage aging, the internal insulation, oil-film dielectric may deteriorate and even fail in the early stage, which is called accumulative effect. Hence, the time-domain dielectric response of oil-film dielectric with multiple impulse voltage aging is studied in this paper. At first, the procedure of the preparation of the tested samples were introduced. Secondly, an aging platform, impulse voltage generator was built to test the accumulative effect of capacitor under multiple impulse voltage. Then, a device was used to test the time-domain dielectric response (polarization depolarization current, PDC) of oil-film dielectric in different aging states. And finally, according to the PDC data, extended Debye model and characteristic parameters were obtained by matrix pencil algorithm identification. The results indicated that with the increase of impulse voltage times, the time-domain dielectric response of oil-film dielectric changed accordingly. The polarization current curve moved up gradually, the insulation resistance decreased when subjected to the repeated impulses. In frequency domain, the frequency spectrum of tan δ changed along with the impulse accumulation aging, especially at low frequency. At last, combined with the aging mechanism of oil-film dielectric under multiple impulse voltage, the test results were discussed.

scholarly journals Charge Carriers Relaxation Behavior of Cellulose Polymer Insulation Used in Oil Immersed Bushing

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 336
Author(s):  
Yu Shang ◽  
Qiang Liu ◽  
Chen Mao ◽  
Sen Wang ◽  
Fan Wang ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Moisture Content ◽  
Charge Carriers ◽  
Dynamics Simulation ◽  
Water Molecules ◽  
Stable Operation ◽  
Polarization Current ◽  
Depolarization Current ◽  
Moisture Condition ◽  
Dc Voltage

Cellulose insulation polymer material is widely used in oil immersed bushing. Moisture is one of the important reasons for the deterioration of cellulose polymer insulation, which seriously threatens the safe and stable operation of bushing. It is significant to study the polarization and depolarization behavior of oil-immersed cellulose polymer insulation with different moisture condition under higher voltage. Based on polarization/depolarization current method and charge difference method, the polarization/depolarization current, interfacial polarization current and electrical conductivity of cellulose polymer under different DC voltages and humidity were obtained. Based on molecular-dynamics simulation, the effect of moisture on cellulose polymer insulation was analyzed. The results show that the polarization and depolarization currents become larger with the increase in DC voltage and moisture. The higher applied voltage will accelerate the charge carrier motion. The ionization of water molecules will produce more charge carriers. Thus, high DC voltage and moisture content will increase the interface polarization current. Increased moisture content results in more charge carriers ionized by water molecules. In addition, the invasion of moisture will reduce the band width of cellulose polymer and enhance its electrostatic potential, so as to improve its overall electrical conductivity. This paper provides a reference for analyzing the polarization characteristics of charge carriers in cellulose polymer insulation.

Electric Field Analysis of Space Charge Injection from a Conductive Nano-Filler Electrode

2010 ◽  
Vol 27 (7) ◽  
pp. 077303 ◽  
Author(s):  
Xiao Chun ◽  
Zhang Ye-Wen ◽  
Zheng Fei-Hu ◽  
Wei Wen-Jie ◽  
An Zhen-Lian
Keyword(s):  
Electric Field ◽  
Space Charge ◽  
Charge Injection ◽  
Field Analysis ◽  
Electric Field Analysis
Sign in / Sign up

Export Citation Format

Share Document