scholarly journals Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1095 ◽  
Author(s):  
Zara Khizer ◽  
Muhammad R. Akram ◽  
Rai M. Sarfraz ◽  
Jorabar Singh Nirwan ◽  
Samia Farhaj ◽  
...  
Keyword(s):  
Drug Release ◽  
Surface Texture ◽  
Drug Absorption ◽  
Extended Release ◽  
Matrix Tablets ◽  
Hydrophilic Matrices ◽  
3D Printed ◽  
3D Surface Texture

Hydroxypropyl methyl cellulose, HPMC, a hydrophilic polymer, is widely used for the development of extended release hydrophilic matrices and it is also considered as a good contender for the fabrication of 3D printing of matrix tablets. It is often combined with plasticisers to enable extrusion. The aim of the current project was to develop plasticizer-free 3D printed hydrophilic matrices using drug loaded filaments prepared via HME to achieve an in vitro (swelling, erosion and drug release) and in vivo (drug absorption) performance which is analogous to hydrophilic matrix tablets developed through conventional approaches. Additionally, the morphology of the printed tablets was studied using quantitative 3D surface texture studies and the porosity calculated. Filaments were produced successfully and used to produce matrix tablets with acceptable drug loading (95–105%), mechanical and surface texture properties regardless of the employed HPMC grade. The viscosity of HPMC had a discernible impact on the swelling, erosion, HPMC dissolution, drug release and pharmacokinetic findings. The highest viscosity grade (K100M) results in higher degree of swelling, decreased HPMC dissolution, low matrix erosion, decreased drug release and extended drug absorption profile. Overall, this study demonstrated that the drug loaded (glipizide) filaments and matrix tablets of medium to high viscosity grades of HPMC, without the aid of plasticisers, can be successfully prepared. Furthermore, the in vitro and in vivo studies have revealed the successful fabrication of extended release matrices.

scholarly journals Formulation development and Stability Studies of Meropenem Extended-Release matrix Tablets

2018 ◽  
pp. 1-12
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
Methyl Cellulose ◽  
Film Coating ◽  
Matrix Tablets ◽  
Formulation Development ◽  
High Concentration ◽  
Drug Diffusion

The aim of this research was to develop a new hydrophilic matrix system containing meropenem (MEX). Extended-release tablets are usually intended for once-a-day administration with benefits to the patient and lower discontinuation of the therapy. Formulations were developed with hydroxyl propyl methyl cellulose or poly (ethylene oxide) as hydrophilic polymers, with different molecular weights (MWs) and concentrations (20 and 30%). The tablets were found to be stable (6 months at 40 ± 2°C and 75± 5% relative humidity), and the film-coating process is recommended to avoid MEX photo-degradation. The dissolution profiles demonstrated an extended-release of MEX for all developed formulations. Dissolution curves analyzed using the Korsmeyer exponential equation showed that drug release was controlled by both drug diffusion and polymer relaxation or erosion mechanisms. A more erosion controlled system was obtained for the formulations containing lower MW and amount of polymer. With the increase in both MW and amount of polymer in the formulation, the gel layer became stronger, and the dissolution was more drug-diffusion dependent. Formulations containing intermediate MW polymers or high concentration (30%) of low MW polymers demonstrated a combination of extended and complete in vitro drug release. This way, these formulations could provide an increased bioavailability in vivo.

scholarly journals Formulation Development and Stability Studies of Norfloxacin Extended-Release Matrix Tablets

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Paulo Renato Oliveira ◽  
Cassiana Mendes ◽  
Lilian Klein ◽  
Maximiliano da Silva Sangoi ◽  
Larissa Sakis Bernardi ◽  
...  
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
Film Coating ◽  
Matrix Tablets ◽  
Formulation Development ◽  
High Concentration ◽  
Drug Diffusion ◽  
Erosion Mechanisms

The aim of this research was to develop a new hydrophilic matrix system containing norfloxacin (NFX). Extended-release tablets are usually intended for once-a-day administration with benefits to the patient and lower discontinuation of the therapy. Formulations were developed with hydroxypropylmethylcellulose or poly(ethylene oxide) as hydrophilic polymers, with different molecular weights (MWs) and concentrations (20 and 30%). The tablets were found to be stable (6 months at40±2°C and75±5% relative humidity), and the film-coating process is recommended to avoid NFX photodegradation. The dissolution profiles demonstrated an extended-release of NFX for all developed formulations. Dissolution curves analyzed using the Korsmeyer exponential equation showed that drug release was controlled by both drug diffusion and polymer relaxation or erosion mechanisms. A more erosion controlled system was obtained for the formulations containing lower MW and amount of polymer. With the increase in both MW and amount of polymer in the formulation, the gel layer became stronger, and the dissolution was more drug-diffusion dependent. Formulations containing intermediate MW polymers or high concentration (30%) of low MW polymers demonstrated a combination of extended and complete in vitro drug release. This way, these formulations could provide an increased bioavailability in vivo.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

scholarly journals Development and biopharmaceutical evaluation of extended release formulation of tramadol hydrochloride based on osmotic technology

2009 ◽  
Vol 59 (1) ◽  
pp. 15-30 ◽  
Author(s):  
Pramod Kumar ◽  
Sanjay Singh ◽  
Brahmeshwar Mishra
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
Relative Bioavailability ◽  
Pharmacokinetic Parameters ◽  
Healthy Human ◽  
Tramadol Hydrochloride ◽  
Release Formulation ◽  
Extended Release Formulation

Development and biopharmaceutical evaluation of extended release formulation of tramadol hydrochloride based on osmotic technologyExtended release formulation of tramadol hydrochloride (TRH) based on osmotic technology was developed and evaluated. Target release profile was selected and different variables were optimized to achieve it. Formulation variables such as the level of swellable polymer, plasticizer and the coat thickness of semipermeable membrane (SPM) were found to markedly affect drug release. TRH release was directly proportional to the levels of plasticizer but inversely proportional to the levels of swellable polymer and coat thickness of SPM. Drug release from developed formulations was independent of pH and agitation intensity but dependent on osmotic pressure of the release media.In vivostudy was also performed on six healthy human volunteers and various pharmacokinetic parameters (cmax,tmax,AUC0-24,MRT) and relative bioavailability were calculated. Thein vitroandin vivoresults were compared with the performance of two commercial TRH tablets. The developed formulation provided more prolonged and controlled TRH release compared to the marketed formulation.In vitro-in vivocorrelation (IVIVC) was analyzed according to the Wagner-Nelson method. The optimized formulation (batch IVB) exhibited good IVIV correlation (R= 0.9750). The manufacturing procedure was found to be reproducible and formulations were stable over 6 months of accelerated stability testing.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

In vitro and in vivo release of dinalbuphine sebacate extended release formulation: Effect of the oil ratio on drug release

2017 ◽  
Vol 531 (1) ◽  
pp. 306-312 ◽  
Author(s):  
Chan-Jung Li ◽  
Mei-Yun Ku ◽  
Chia-Yin Lu ◽  
Yu-En Tien ◽  
Wendy H. Chern ◽  
...  
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
Release Formulation ◽  
Extended Release Formulation ◽  
In Vivo Release

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Design and evaluation of a novel floating osmotic pump system

2009 ◽  
Vol 12 (1) ◽  
pp. 129 ◽  
Author(s):  
Zhihong Zhang ◽  
Bo Peng ◽  
Xinggang Yang ◽  
Chao Wang ◽  
Guangmei Sun ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
In Vitro Release ◽  
Osmotic Pump ◽  
Matrix Tablets ◽  
In Vivo Evaluation ◽  
Pump System ◽  
Conventional Tablet

PURPOSE. Find a novel delivery system for oral administration of drugs that have absorption window in the upper part of gastrointestinal (GI) track. METHODS. Dipyridamole was chosen as the model drug. A novel system, which combined the osmotic pump controlled release system and the floating system, was designed; matrix tablets (MT) were prepared for compares. The effects of pH, temperature and hydrodynamic conditions on drug release and the floating behavior of floating osmotic pump system (FOP) were investigated. In vivo evaluation was performed by a three-crossover study in six Beagle dogs relative to the conventional tablet (CT). Cumulative percent input in vivo was compared with that of in vitro release profiles. RESULTS. Floating behavior of FOP, drug releases from FOP and MT were sensitive to pH of dissolution media but not sensitive to temperature; the release of dipyridamole from MT was influenced by stirring rate while drug release from FOP was not. AUC of FOP was larger than MT and CT. The linear correlations between fraction absorbed in vivo and fraction dissolved in vitro was established for FOP-a true zero-order release formula, whereas only a nonlinear correlation was obtained for MT. CONCLUTIONS. FOP could be a novel way for the oral administration for drugs like dipyridamole.

Design and In-Vivo Evaluation of Risperidone Buccal Mucoadhesive Patches of Interpolymer Matrix

2021 ◽  
pp. 5305-5312
Author(s):  
Pradeep HK ◽  
Girish B ◽  
Nooruddeen K ◽  
Thimmasetty J ◽  
Venkateswarlu BS
Keyword(s):  
Drug Release ◽  
Drug Absorption ◽  
Kinetic Models ◽  
Phosphate Buffer Solution ◽  
Water Soluble ◽  
Content Uniformity ◽  
Human Beings ◽  
Insoluble Polymers

The buccal cavity is an alternate route for the administration of the drug. This route gained acceptance as increase in bioavailability is observed due to bypass of first pass metabolism. Solvent casting method was employed for the preparation of the risperidone mucoadhesive patches using different combinations of water soluble and water insoluble polymers using polyvinyl alcohol as a backing layer. Our main objective of this study was to understand the behaviour of water soluble and water insoluble polymers in combination on release pattern. Six different formulations of mucoadhesive patches were evaluated for physicochemical parameters like weight uniformity, content uniformity, thickness uniformity, surface pH, swelling studies, tensile strength, folding endurance, in-vitro drug release, and in-vivo drug absorption. Drug loaded mucoadhesive patches of various polymer bases had shown 35.64 to 72.33% drug release in 30 min in phosphate buffer solution of pH 6.6. In-vitro release data from patches were fit to different equations and kinetic models to explain release profiles. Kinetic models like Hixon-Crowell and Higuchi models were used. The formulation containing HPMC (15Cps) and polyvinyl pyrrolidone was considered as optimized based on the physicochemical and pharmaceutical properties. In-vivo studies in rabbits, carried out with prior permission from IAEC, showed 80.40% of drug release from the optimized patches. In-vivo and in-vitro correlations were found to be good. The drug absorption was found significant from the optimized formulation in healthy rabbits. The structure of the buccal membrane and permeability factors are similar in both human beings and rabbits. Therefore mucoadhesive patches of risperidone may be accepted with the important advantage of reduced risperidone dose.

Sign in / Sign up

Export Citation Format

Share Document