scholarly journals Biotechnological Preparation of Gelatines from Chicken Feet

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1060 ◽  
Author(s):  
Pavel Mokrejš ◽  
Petr Mrázek ◽  
Robert Gál ◽  
Jana Pavlačková
Keyword(s):  
Treatment Time ◽  
Gel Strength ◽  
Raw Material ◽  
Enzyme Treatment ◽  
Process Conditions ◽  
The European Union ◽  
Material Source ◽  
Suitable Alternative ◽  
Factor Design ◽  
Process Factors

In the European Union (EU), about five tons of poultry by-product tissues are produced every year. Due to their high collagen content, they represent a significant raw material source for gelatine production. The aim of the paper was the biotechnological preparation of gelatine from chicken feet. The influence of selected process factors on the gelatine yield, gel strength, viscosity, and ash of gelatine was observed; a two-level factor design of experiments with three variable process factors (enzyme addition, enzyme treatment time, and gelatine extraction time) was applied. After grinding and separating soluble proteins and fat, the purified raw material was treated in water at pH 7.5 with the addition of endoprotease at 23 °C and after thorough washing with water at 80 °C, gelatine was extracted. By the suitable choice of process conditions, gelatine with high gel strength (220–320 bloom), low ash content (<2.0%) and viscosity of 3.5–7.3 mPa·s can be prepared. The extraction efficiency was 18–38%. The presented technology is innovative mainly by the enzymatic processing of the source raw material, which is economically, technologically, and environmentally beneficial for manufacturers. Chicken gelatines are a suitable alternative to gelatines made from mammals or fish, and can be used in many food, pharmaceutical, and biomedical applications.

scholarly journals Biotechnological Processing of Laying Hen Paw Collagen into Gelatins

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1415
Author(s):  
Robert Gál ◽  
Pavel Mokrejš ◽  
Jana Pavlačková ◽  
Ngo Thi Hong Linh ◽  
Jiří Mlček
Keyword(s):  
Batch Process ◽  
Extraction Process ◽  
Laying Hen ◽  
Gel Strength ◽  
Raw Material ◽  
Material Source ◽  
Extraction Step ◽  
Cross Links ◽  
Process Factors ◽  
Enzyme Dosage

By-products of laying hens represent a promising raw material source with a high collagen content, which is currently not adequately used. The aim of the paper is to prepare gelatins from laying hen paws. The purified collagen raw material was processed by a biotechnological process using the food endoprotease Protamex®. After cleavage of the cross-links in the collagen structure, the gelatin was extracted by a batch process with a stirrer in two extraction steps. The influence of the extraction process on the yield of gelatins and on selected qualitative parameters of gelatins was monitored by two-level factor experiments with three selected process factors. The studied factors were: enzyme dosage (0.2–0.8%), enzyme processing time (24–72 h) and gelatin extraction time (30–120 min). After the first extraction step at 75 °C, gelatin was extracted with a yield of 8.2–21.4% and a gel strength of 275–380 Bloom. In the second extraction step at 80–100 °C, it is possible to obtain another portion (3.3–7.7%) of gelatin with a gel strength of 185–273 Bloom. Total extraction efficiency of gelatins prepared from laying hen collagen is almost 30%. The prepared gelatins are of high quality and, under proper extraction conditions, gelatins with a gel strength above 300 Bloom can be prepared, thus equaling commercial beef and pork gelatins of the highest quality. Biotechnological processing of laying hen collagen into gelatins is environmentally friendly.

scholarly journals Production of Methane, Hydrogen and Ethanol from Secale cereale L. Straw Pretreated with Sulfuric Acid

Molecules ◽  
2020 ◽  
Vol 25 (4) ◽  
pp. 1013 ◽  
Author(s):  
Jarosław Domański ◽  
Olga Marchut-Mikołajczyk ◽  
Weronika Cieciura-Włoch ◽  
Piotr Patelski ◽  
Urszula Dziekońska-Kubczak ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Secale Cereale ◽  
Treatment Time ◽  
Ethanol Yield ◽  
Biofuel Production ◽  
Enzyme Treatment ◽  
Electricity Production ◽  
The European Union ◽  
Rye Straw ◽  
Secale Cereale L

The study describes sulfuric acid pretreatment of straw from Secale cereale L. (rye straw) to evaluate the effect of acid concentration and treatment time on the efficiency of biofuel production. The highest ethanol yield occurred after the enzyme treatment at a dose of 15 filter paper unit (FPU) per gram of rye straw (subjected to chemical hydrolysis with 2% sulfuric acid (SA) at 121 °C for 1 h) during 120 h. Anaerobic digestion of rye straw treated with 10% SA at 121 °C during 1 h allowed to obtain 347.42 L methane/kg volatile solids (VS). Most hydrogen was released during dark fermentation of rye straw after pretreatment of 2% SA, 121 °C, 1 h and 1% SA, 121 °C, 2 h—131.99 and 134.71 L hydrogen/kg VS, respectively. If the rye straw produced in the European Union were processed into methane, hydrogen, ethanol, the annual electricity production in 2018 could reach 9.87 TWh (terawatt-hours), 1.16 TWh, and 0.60 TWh, respectively.

scholarly journals Pengaruh Defatting, Frekuensi Pencucian dan Penyimpanan Beku Terhadap Kualitas Surimi Ikan Lele

2021 ◽  
Vol 9 (2) ◽  
pp. 97-106
Author(s):  
Anhar Rozi ◽  
Ikhsanul Khairi ◽  
Reni Tri Cahyani ◽  
Stephani Bija ◽  
Nurhikma Nurhikma ◽  
...  
Keyword(s):  
Protein Content ◽  
Water Content ◽  
Frozen Storage ◽  
Fat Content ◽  
Gel Strength ◽  
High Protein ◽  
Raw Material ◽  
Suitable Alternative ◽  
High Protein Content

Catfish was a suitable alternative for the main raw material for making surimi, because it has a high protein content, easy to found and than has good prospective to be made surimi product. The aimed of this study to analyze effect of defatting, washing cycle, and frozen storage was add cryoprotectant. This research was conducted three step that is deffating, washing, and made surimi. The concentration of the selected for defatting processed was NaH2PO4 2% during 10 minutes and the result fat content was 0.15%. The best washing was one time of made kamaboko and has gel strength (510.35 g.cm), and the best quality (PLG : 0%; pH : 6.53; water content : 76.6%; folding test : 3.22; bite test : 3,77) when compared with washing cycle two times and three times. The best cryoprotectant addition was 4% trehalose and result of gel strength was 354.15 g.cm for three weeks of frozen storage.

Study on the Chemical Modification Process of Jute Fiber

TAPPI Journal ◽  
2010 ◽  
Vol 9 (2) ◽  
pp. 23-29 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration, and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration, and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

Determination of main raw material source in bar soaps using mid-infrared spectroscopy combined with classification tools

2021 ◽  
Vol 164 ◽  
pp. 106029
Author(s):  
Diego Maciel Gerônimo ◽  
Sheila Catarina de Oliveira ◽  
Frederico Luis Felipe Soares ◽  
Patricio Peralta-Zamora ◽  
Noemi Nagata
Keyword(s):  
Infrared Spectroscopy ◽  
Raw Material ◽  
Material Source ◽  
Mid Infrared ◽  
Mid Infrared Spectroscopy

scholarly journals Utilization of Cumbeba (Tacinga inamoena) Residue: Drying Kinetics and Effect of Process Conditions on Antioxidant Bioactive Compounds

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 788
Author(s):  
João Paulo de Lima Ferreira ◽  
Alexandre José de Melo Queiroz ◽  
Rossana Maria Feitosa de Figueirêdo ◽  
Wilton Pereira da Silva ◽  
Josivanda Palmeira Gomes ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Bioactive Compounds ◽  
Fixed Bed ◽  
Drying Kinetics ◽  
Raw Material ◽  
Process Conditions ◽  
Temperature Range ◽  
Water Diffusivity ◽  
Pharmaceutical Industries ◽  
Effective Water

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (Deff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (Deff) ranged from 6.4890 to 11.1900 × 10−6 m2/s, 2.9285 to 12.754 × 10−9 m2/s and 1.5393 × 10−8 to 12.4270 × 10−6 m2/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50–80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries.

scholarly journals Towards a Circular Economy Taxation Framework: Expectations and Challenges of Implementation

2021 ◽  
Author(s):  
Leonidas Milios
Keyword(s):  
Circular Economy ◽  
Action Plan ◽  
Policy Instruments ◽  
Policy Instrument ◽  
Detailed Examination ◽  
Raw Material ◽  
The European Union ◽  
Material Resource ◽  
Waste Hierarchy ◽  
Tax Relief

AbstractThe transition to a circular economy is a complex process requiring wide multi-level and multi-stakeholder engagement and can be facilitated by appropriate policy interventions. Taking stock of the importance of a well-balanced policy mix that includes a variety of complementing policy instruments, the circular economy action plan of the European Union (COM(2020) 98 final) includes a section about “getting the economics right” in which it encourages the application of economic instruments. This contribution presents a comprehensive taxation framework, applied across the life cycle of products. The framework includes (1) a raw material resource tax, (2) reuse/repair tax relief, and (3) a waste hierarchy tax at the end of life of products. The research is based on a mixed method approach, using different sources to analyse the different measures in the framework. More mature concepts, such as material resource taxes, are analysed by reviewing the existing literature. The analysis of tax relief on repairs is based on interviews with stakeholders in Sweden, where this economic policy instrument has been implemented since 2017. Finally, for the waste hierarchy tax, which is a novel proposition in this contribution, macroeconomic modelling is used to analyse potential impacts of future implementation. In all cases, several implementation challenges are identified, and potential solutions are discussed according to literature and empirical sources. Further research is required both at the individual instrument and at the framework level. Each of the tax proposals needs a more detailed examination for its specificities of implementation, following the results of this study.

scholarly journals Crushed Bricks: Demolition Waste as a Sustainable Raw Material for Geopolymers

2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Construction Material ◽  
Raw Material ◽  
The European Union ◽  
Total Energy Consumption ◽  
Demolition Waste ◽  
Crushed Brick

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

scholarly journals The Influence of Monomer Composition and Surface-CrossLinking Condition on Biodegradation and Gel Strength of Super Absorbent Polymer

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 663
Author(s):  
Jung Soo Kim ◽  
Dong Hyun Kim ◽  
Youn Suk Lee
Keyword(s):  
Treatment Time ◽  
Gel Strength ◽  
Control Group ◽  
Cellulose Content ◽  
Retention Capacity ◽  
Super Absorbent Polymer ◽  
Monomer Composition ◽  
Cellulose Hydrogel ◽  
Improved Performance ◽  
Absorbent Polymer

In this study, a superabsorbent polymer (SAP) comprising poly (IA-co-cellulose-co-VSA-co-AA; ICVA) core-SAP (CSAP) was synthesized through radical polymerization using itaconic acid (IA), acrylic acid (AA), cellulose, and vinyl sulfonic acid (VSA) as monomers. The absorption performances and relative biodegradability of various compositions prepared by adjusting the amounts of cellulose and VSA with constant IA and AA content were compared. Increasing the cellulose content in CSAP contributed to improved biodegradation of the surface-crosslinked SAP (SSAP) and gel strength, although the free absorbency (FA) and centrifuge retention capacity (CRC) decreased. Increasing the VSA content resulted in strong anionicity, which enables the absorption of large amounts of water. Surface-crosslinking technology was applied to the CSAP synthesized with the optimal composition ratio to increase its absorption performance and gel strength. Improved performance of the synthesized SSAP (a CRC of 30.4 g/g, absorbency under load (AUL) of 23.3 g/g, and permeability of 55 s) was achieved by selecting the optimal surface-crosslinking treatment time and the amount of distilled water in the surface-crosslinking solution: as the latter was increased in the surface-crosslinking solution, the AUL and permeability of the SSAP were improved, and its biodegradability was found to be 54% compared to the 100% biodegradable cellulose hydrogel in the control group.

scholarly journals Investigating microcrystalline cellulose crystallinity using Raman spectroscopy

Cellulose ◽  
2021 ◽  
Author(s):  
Ana Luiza P. Queiroz ◽  
Brian M. Kerins ◽  
Jayprakash Yadav ◽  
Fatma Farag ◽  
Waleed Faisal ◽  
...  
Keyword(s):  
Raman Spectra ◽  
Microcrystalline Cellulose ◽  
Web Application ◽  
Principal Component ◽  
Raw Material ◽  
Least Squares Regression ◽  
Analysis Model ◽  
General Reference ◽  
Material Source ◽  
Univariate Model

AbstractMicrocrystalline cellulose (MCC) is a semi-crystalline material with inherent variable crystallinity due to raw material source and variable manufacturing conditions. MCC crystallinity variability can result in downstream process variability. The aim of this study was to develop models to determine MCC crystallinity index (%CI) from Raman spectra of 30 commercial batches using Raman probes with spot sizes of 100 µm (MR probe) and 6 mm (PhAT probe). A principal component analysis model separated Raman spectra of the same samples captured using the different probes. The %CI was determined using a previously reported univariate model based on the ratio of the peaks at 380 and 1096 cm−1. The univariate model was adjusted for each probe. The %CI was also predicted from spectral data from each probe using partial least squares regression models (where Raman spectra and univariate %CI were the dependent and independent variables, respectively). Both models showed adequate predictive power. For these models a general reference amorphous spectrum was proposed for each instrument. The development of the PLS model substantially reduced the analysis time as it eliminates the need for spectral deconvolution. A web application containing all the models was developed. Graphic abstract

Sign in / Sign up

Export Citation Format

Share Document