scholarly journals Effects of an Organic-Inorganic Hybrid Containing Allyl Benzoxazine and POSS on Thermal Properties and Flame Retardancy of Epoxy Resin

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 770 ◽  
Author(s):  
Benben Liu ◽  
Huiling Wang ◽  
Xiaoyan Guo ◽  
Rongjie Yang ◽  
Xiangmei Li
Keyword(s):  
Thermal Properties ◽  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Cone Calorimeter ◽  
Inorganic Hybrid ◽  
X Ray

A novel organic-inorganic hybrid containing allyl benzoxazine and polyhedral oligomeric silsesquioxane (POSS) was synthesized by the thiol-ene (click) reaction. The benzoxazine (BOZ)-containing POSS (SPOSS-BOZ) copolymerized with benzoxazine/epoxy resin was used to prepare composites of SPOSS-PBZ-E nanocomposites(NPs). The polymerization behavior was monitored by FTIR and non-isothermal differential scanning calorimetry (DSC), which showed that the composites had completely cured with multiple polymerization mechanisms according to the oxazine ring-opening and epoxy resin (EP) polymerization. The thermal properties of the organic–inorganic polybenzoxazine (PBZ) nanocomposites were analyzed by DSC and thermogravimetric analysis (TGA). Furthermore, the X-ray diffraction analysis and the scanning electron microscopy (SEM) micrographs of the SPOSS-PBZ-E nanocomposites indicated that SPOSS was chemically incorporated into the hybrid nanocomposites in the size range of 80–200 nm. The flame retardancy of the benzoxazine epoxy resin composites was investigated by limiting oxygen index (LOI), UL 94 vertical burn test, and cone calorimeter tests. When the amount of SPOSS reached 10% or more, the vertical burning rating of the curing system arrived at V-1, and when the SPOSS-BOZ content reached 20 wt %, the thermal stability and flame retardancy of the material were both improved. Moreover, in the cone calorimeter testing, the addition of SPOSS-BOZ hindered the decomposition of the composites and led to a reduction in the peak heat release rate (pHRR), the average heat release rate (aHRR), and the total heat release (THR) values by about 20%, 25%, and 25%, respectively. The morphologies of the chars were also studied by SEM and energy dispersive X-ray spectroscopy (EDX), and the flame-retardant mechanism of POSS was mainly a condensed-phase flame retardant. The ceramic layer was formed by the enrichment of silicon on the char surface. When there are enough POSS nanoparticles, it can effectively protect the combustion of internal polymers.

Synthesis of a phosphorus–nitrogen-containing flame retardant and its application in epoxy resin

2018 ◽  
Vol 31 (2) ◽  
pp. 186-196 ◽  
Author(s):  
Shuang Yang ◽  
Yefa Hu ◽  
Qiaoxin Zhang
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Epoxy Resins ◽  
Proton Nuclear Magnetic Resonance ◽  
Scanning Calorimetry ◽  
Cone Calorimeter Test

In this article, a phosphorus–nitrogen-containing flame retardant (DOPO-T) was successfully synthesized by nucleophilic substitution reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and cyanuric chloride. The chemical structure of DOPO-T was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (NMR) and phosphorous-31 NMR, and elemental analysis. DOPO-T was then blended with diglycidyl ether of bisphenol-A to prepare flame-retardant epoxy resins. Thermal properties, flame retardancy, and combustion behavior of the cured epoxy resins were evaluated by differential scanning calorimetry, thermogravimetric analysis, limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The results indicated that the glass transition temperature ( Tg) and temperature at 5% weight loss of epoxy resin (EP)/DOPO-T thermosets were gradually decreased with the increasing content of DOPO-T. DOPO-T catalyzed the decomposition of EP matrix in advance. The flame-retardant performance of EP thermosets was significantly enhanced with the addition of DOPO-T. EP/DOPO-T-0.9 sample had an LOI value of 36.2% and achieved UL94 V-1 rating. In addition, the average of heat release rate, peak of heat release rate, average of effective heat of combustion, and total heat release (THR) of EP/DOPO-T-0.9 sample were decreased by 32%, 48%, 23%, and 31%, respectively, compared with the neat EP sample. Impressively, EP/DOPO-T thermosets acquired excellent flame retardancy under low loading of flame retardant.

scholarly journals Enhanced Thermal Insulation and Flame-Retardant Properties of Polyvinyl Alcohol-Based Aerogels Composited with Ammonium Polyphosphate and Chitosan

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
MinYi Luo ◽  
Jiayou Xu ◽  
Shu Lv ◽  
XueFeng Yuan ◽  
Xiaolan Liang
Keyword(s):  
Polyvinyl Alcohol ◽  
Heat Release ◽  
Flame Retardant ◽  
Thermal Insulation ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Ammonium Polyphosphate ◽  
Composite Aerogel ◽  
Composite Aerogels

Polyvinyl alcohol- (PVA-) based aerogels have attracted widespread attention owing to their low cost, eco-friendliness, and low density. However, the applications of PVA-based aerogels are limited by their flammability. In this study, a flame retardant, ammonium polyphosphate (APP), and a biopolymer, chitosan (CS), were added to polyvinyl alcohol (PVA), and the polymer was further crosslinked using boric acid (H3BO3). In the PVA aerogels, the negatively charged APP and positively charged CS formed a polyelectrolyte complex (PEC) through ionic interaction. Cone calorimetry and vertical burning tests (UL-94) indicated that the PVA composite aerogels have excellent flame retardancy; they could decrease the heat release rate, total heat release rate, and carbon dioxide (CO2) generation. Both PVA/H3BO3 and APP-CS in the composite aerogel could be burned to carbon, and the foamed char layer could act together to impart the PVA composite aerogels with good flame retardancy. Further, the decrease in the temperature at the backside of the aerogels with increasing APP-CS content, as determined by the flame-spraying experiment, indicated that the PVA-based aerogels with APP-CS can also serve as thermal insulation materials. This work provides an effective and promising method for the preparation of PVA-based aerogels with good flame retardancy and thermal insulation property for construction materials.

Flame Retardation of Natural Bamboo Fiber/ Polypropylene Fiber Non-Woven Materials

2011 ◽  
Vol 105-107 ◽  
pp. 1723-1726
Author(s):  
Wei Ma ◽  
Wen Bin Yao
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Cone Calorimeter ◽  
Polypropylene Fiber ◽  
Bamboo Fiber ◽  
Peak Heat Release Rate ◽  
Natural Bamboo Fiber ◽  
Flame Retardation

According to Natural Bamboo Fiber/ Polypropylene fiber(PP) non-woven materials encountered the problem that its flame retardation is insufficient, this paper tried to add flame retardant to improve its performance, then the cone calorimeter was used to evaluate its flammability. The results show that Peak-Heat Release Rate and Smoke Release Rate etc significantly improved. In accordance with the UL94 ,the flame retardation meet the level V-0 , consistent with the requirements of enterprise.

scholarly journals Preparation of γ-Divinyl-3-Aminopropyltriethoxysilane Modified Lignin and Its Application in Flame Retardant Poly(lactic acid)

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1505 ◽  
Author(s):  
Yan Song ◽  
Xu Zong ◽  
Nan Wang ◽  
Ning Yan ◽  
Xueying Shan ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Poly Lactic Acid ◽  
Modified Lignin ◽  
Thermal Stability Of

Lignin can be a candidate as a charring agent applied in halogen-free flame retardant polymers, and incorporation of silicon and nitrogen elements in lignin can benefit to enhancing its thermal stability and charring ability. In the present work, wheat straw alkali lignin (Lig) was modified to incorporate silicon and nitrogen elements by γ-divinyl-3-aminopropyltriethoxysilane, and the modified lignin (CLig) was combined with ammonium polyphosphate (APP) as intumescent flame retardant to be applied in poly(Lactic acid) (PLA). The flame retardancy, combustion behavior and thermal stability of PLA composites were studied by the limited oxygen index (LOI), vertical burning testing (UL-94), cone calorimetry testing (CCT) and thermogravimetric analysis (TGA), respectively. The results showed a significant synergistic effect between CLig and APP in flame retarded PLA (PLA/APP/CLig) occured, and the PLA/APP/CLig had better flame retardancy. CCT data analysis revealed that CLig and APP largely reduced the peak heat release rate (PHRR) and total heat release rate (THR) of PLA, indicating their effectiveness in decreasing the combustion of PLA. TGA results exhibited that APP and CLig improved the thermal stability of PLA at high temperature. The analysis of morphology and structure of residual char indicated that a continuous, compact and intumescent char layer on the material surface formed during firing, and had higher graphitization degree. Mechanical properties data showed that PLA/APP/CLig had higher tensile strength as well as elongation at break.

Synthesis of multielement phosphazene derivative and the study on flame-retardant properties of epoxy resin

2020 ◽  
Vol 32 (10) ◽  
pp. 1169-1180 ◽  
Author(s):  
Lurong Wang ◽  
Baoping Yang ◽  
Yongliang Guo ◽  
Yabin Zhang ◽  
Niannian Wang ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Condensed Phase ◽  
Release Rate ◽  
Photoelectron Spectroscopy ◽  
Carbon Layer ◽  
Limiting Oxygen Index ◽  
Ep Matrix

Herein, we have successfully synthesized phosphorus/nitrogen/silicon tri-elements compound phosphazene derivative hexa-[4-( N-(3-(triethoxysilyl)propyl)acetamide)phenoxy]cyclotriphosphazene (HNTPC) from hexachlorotriphosphazenitrile, methyl 4-hydroxybenzoate, and 3-triethoxysilylpropylamine, and it was used as an additive flame retardant in epoxy resin (EP). Then, the thermal stability and flame retardancy of the composite (HNTPC/EP) were tested. Thermogravimetric analysis showed that the presence of HNTPC made EP matrix decompose at a relatively low temperature, thus promoted the formation of a stable coke layer and protected the matrix from fire. Therefore, the amount of carbon residue was markedly increased at 800°C, indicating an outstanding condensed phase flame-retardant effect. Furthermore, various combustion test data manifested that the addition of HNTPC could significantly improve the flame-retardant performance of EP. In addition, the sample could pass the vertical burning tests (UL-94) V-1 grade when the addition amount was 10% and the limiting oxygen index value was 32.6%, the peak heat release rate and total heat release rate decreased by 40.0% and 21.5%, respectively. Besides, the results of scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy also showed that HNTPC can promote the formation of carbon layer and improved the flame-retardant property of EP. Finally, the condensed phase and gas phase synergistic flame-retardant mechanism of HNTPC was proposed.

scholarly journals Analysis of the Fire Behavior of Polymers (PP, PA 6 and PE-LD) and Their Improvement Using Various Flame Retardants

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5756
Author(s):  
Dieter Hohenwarter ◽  
Hannelore Mattausch ◽  
Christopher Fischer ◽  
Matthias Berger ◽  
Bernd Haar
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Radiation Intensity ◽  
Cone Calorimeter ◽  
Flame Retardants ◽  
Fire Behavior ◽  
Expandable Graphite ◽  
Aging Effects

The fire behavior of polymers is examined primarily with the time-dependent heat release rate (HRR) measured with a cone calorimeter. The HRR is used to examine the fire behavior of materials with and without flame retardants, especially Polypropylene (PP-Copo) and Polyethylene (PE-LD). Polypropylene is stored for up to 99 days under normal conditions and the heat release rate shows especially changes about 100 s after irradiation with cone calorimeter, which may be caused by aging effects. The effect of crosslinking to the burning behavior of PP was examined too. Polyamides (PA 6) are irradiated with a radiation intensity of 25 kW/m2 to 95 kW/m2 and fire-related principles between radiation intensity and time to ignition can be derived from the measurement results. In order to comprehensively investigate the fire behavior of PP (also with flame retardant additives), the samples were also exposed to a flame, according to UL 94 with small power (50 W) and is inflamed with the power of a few 100 W. The irradiation causes different trigger mechanisms for the flame retardant additives in a plastic than the flame exposure. It is shown that the compound, which is favorable for irradiation, is not necessarily good for flame exposure. It can be seen that expandable graphite alone or with the addition of other additives is a very effective flame retardant for PP.

Intumescent flame retardant coating for polyamide 6,6 (PA 6,6) fabrics containing carbon nanotubes: Synergistic effect of filler on thermal stability and flame retardancy

2018 ◽  
Vol 89 (10) ◽  
pp. 2031-2040 ◽  
Author(s):  
Fanglong Zhu ◽  
QQ Feng ◽  
YF Xu ◽  
JF Hu
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Intumescent Flame Retardant ◽  
Flame Resistance ◽  
Limiting Oxygen Index

Flame retardant mixtures of multi-walled carbon nanotubes (MWCNTs) and intumescent flame retardant (IFR) coatings were applied to polyamide 6,6 (PA 6,6) fabrics to explore whether MWCNTs acted as a good synergist on the thermal stability and flame resistance of the IFR system. The influence of MWCNTs on the flame retardant properties and thermal degradation of the PA 6,6 fabrics were investigated by limiting oxygen index (LOI), vertical burning test (VBT), thermogravimetric analyzer (TGA), scanning electron microscopy (SEM) and cone calorimeter test (CCT). The peak heat release rate and total heat release of the IFR-PA 6,6 fabric with three kinds of wt% MWCNTs were lower than those of the only traditional IFR-PA 6,6 fabric (reduced by 74.2–76.4% and 74.3–76.5%, respectively). As compared to the traditional IFR coating, it was found that no enhancements for thermal stability and flame retardancy in terms of the ability to retard ignition were achieved for the MWCNT/IFR coating. These results demonstrated that the introduction of MWCNTs into an IFR coating can improve the flame retardancy of PA 6,6 fabric in terms of the heat release rate from CCT analysis, but it failed other burning measurements, such as LOI and VBT.

scholarly journals Improvement of Flame Retardancy of Polyurethane Foam Using DOPO-Immobilized Silica Aerogel

2021 ◽  
Vol 8 ◽  
Author(s):  
Xin’guo Zheng ◽  
Quanxiao Dong ◽  
Xi Wang ◽  
Peiyun Yu ◽  
Weimin Wang ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Release Rate ◽  
Silica Aerogel ◽  
Cone Calorimeter ◽  
Polyurethane Foams ◽  
Total Heat Release ◽  
Microscale Combustion Calorimeter ◽  
Combustion Calorimeter

In this work, silica aerogel was modified by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-1-oxide (DOPO). Then DOPO-immobilized silica aerogel nanoparticles were used as a flame retardant to prepare flame-retardant polyurethane foams. Microscale combustion calorimeter and cone calorimeter tests were employed to evaluate the flame retardancy of polyurethane foams. It was found that both the heat release rate and the total heat release of the composites were reduced with the incorporation of DOPO immobilized silica aerogel. It is speculated that the DOPO-immobilized silica aerogel nanoparticles can inhibit the degradation of polyurethane and catalyze the formation of carbonaceous carbon on the surface.

scholarly journals Dual UV-Thermal Curing of Biobased Resorcinol Epoxy Resin-Diatomite Composites with Improved Acoustic Performance and Attractive Flame Retardancy Behavior

2021 ◽  
Vol 2 (1) ◽  
pp. 24-48
Author(s):  
Quoc-Bao Nguyen ◽  
Henri Vahabi ◽  
Agustín Rios de Anda ◽  
Davy-Louis Versace ◽  
Valérie Langlois ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Sound Absorption ◽  
Flexural Modulus ◽  
Construction Materials ◽  
Acoustic Properties ◽  
Low Frequencies ◽  
Compacting Pressure

This study has developed novel fully bio-based resorcinol epoxy resin–diatomite composites by a green two-stage process based on the living character of the cationic polymerization. This process comprises the photoinitiation and subsequently the thermal dark curing, enabling the obtaining of thick and non-transparent epoxy-diatomite composites without any solvent and amine-based hardeners. The effects of the diatomite content and the compacting pressure on microstructural, thermal, mechanical, acoustic properties, as well as the flame behavior of such composites have been thoroughly investigated. Towards the development of sound absorbing and flame-retardant construction materials, a compromise among mechanical, acoustic and flame-retardant properties was considered. Consequently, the composite obtained with 50 wt.% diatomite and 3.9 MPa compacting pressure is considered the optimal composite in the present work. Such composite exhibits the enhanced flexural modulus of 2.9 MPa, a satisfying sound absorption performance at low frequencies with Modified Sound Absorption Average (MSAA) of 0.08 (for a sample thickness of only 5 mm), and an outstanding flame retardancy behavior with the peak of heat release rate (pHRR) of 109 W/g and the total heat release of 5 kJ/g in the pyrolysis combustion flow calorimeter (PCFC) analysis.

Sign in / Sign up

Export Citation Format

Share Document