scholarly journals Synthesis and Characterization of 3-DOM IrO2 Electrocatalysts Templated by PMMA for Oxygen Evolution Reaction

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 629
Author(s):  
Fei Liu ◽  
Xuechu Sun ◽  
Xiu Chen ◽  
Cuicui Li ◽  
Jun Yu ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Photoelectron Spectroscopy ◽  
Oxygen Evolution Reaction ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Iridium Dioxide ◽  
Internal Structures ◽  
Ordered Macroporous

Three-dimensional ordered macroporous (3-DOM) IrO2 material was prepared using PMMA as a template and ammonia as a chelator. These 3-DOM IrO2 honeycomb arrays showed a large surface area and ordered macropores (155 nm in diameter) cross-linked by secondary mesopores. Internal structures of 3-DOM IrO2 material were observed microscopically through these secondary pores. According to the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) spectra, 3-DOM IrO2 has a rutile crystal structure and is mainly composed of iridium dioxide. In acidic electrolytes, the overpotential of 3-DOM IrO2 material at 0.5 mV cm−2 was only 0.22 V. Accelerated durability tests demonstrated excellent durability of 3-DOM IrO2 as an oxygen evolution reaction (OER) catalyst.

scholarly journals Optical, XPS and XRD Studies of Semiconducting Copper Sulfide Layers on a Polyamide Film

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Valentina Krylova ◽  
Mindaugas Andrulevičius
Keyword(s):  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Studies ◽  
Polyamide Film ◽  
Indirect Band Gap ◽  
Xrd Method

Copper sulfide layers were formed on polyamide PA 6 surface using the sorption-diffusion method. Polymer samples were immersed for 4 and 5 h in 0.15 mol⋅  solutions and acidified with HCl (0.1 mol⋅) at . After washing and drying, the samples were treated with Cu(I) salt solution. The samples were studied by UV/VIS, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) methods. All methods confirmed that on the surface of the polyamide film a layer of copper sulfide was formed. The copper sulfide layers are indirect band-gap semiconductors. The values of are 1.25 and 1.3 eV for 4 h and 5 h sulfured PA 6 respectively. Copper XPS spectra analyses showed Cu(I) bonds only in deeper layers of the formed film, while in sulfur XPS S 2p spectra dominating sulfide bonds were found after cleaning the surface with ions. It has been established by the XRD method that, beside , the layer contains as well. For PA 6 initially sulfured 4 h, grain size forchalcocite, , was  nm and fordjurleite, , it was 54.17 nm. The sheet resistance of the obtained layer varies from 6300 to 102 .

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Three-dimensional ordered macroporous IrO2 as electrocatalyst for oxygen evolution reaction in acidic medium

2012 ◽  
Vol 22 (13) ◽  
pp. 6010 ◽  
Author(s):  
Wei Hu ◽  
Yaqin Wang ◽  
Xiaohong Hu ◽  
Yuanquan Zhou ◽  
Shengli Chen
Keyword(s):  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Acidic Medium ◽  
Three Dimensional ◽  
Ordered Macroporous

scholarly journals Nitrogen-Doped Sponge Ni Fibers as Highly Efficient Electrocatalysts for Oxygen Evolution Reaction

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Kaili Zhang ◽  
Xinhui Xia ◽  
Shengjue Deng ◽  
Yu Zhong ◽  
Dong Xie ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Photoelectron Spectroscopy ◽  
Oxygen Evolution Reaction ◽  
Active Sites ◽  
High Performance ◽  
Active Phase ◽  
X Ray ◽  
Highly Active ◽  
N Doping ◽  
Energy Conversion Devices

Abstract Controllable synthesis of highly active micro/nanostructured metal electrocatalysts for oxygen evolution reaction (OER) is a particularly significant and challenging target. Herein, we report a 3D porous sponge-like Ni material, prepared by a facile hydrothermal method and consisting of cross-linked micro/nanofibers, as an integrated binder-free OER electrocatalyst. To further enhance the electrocatalytic performance, an N-doping strategy is applied to obtain N-doped sponge Ni (N-SN) for the first time, via NH3 annealing. Due to the combination of the unique conductive sponge structure and N doping, the as-obtained N-SN material shows improved conductivity and a higher number of active sites, resulting in enhanced OER performance and excellent stability. Remarkably, N-SN exhibits a low overpotential of 365 mV at 100 mA cm−2 and an extremely small Tafel slope of 33 mV dec−1, as well as superior long-term stability, outperforming unmodified sponge Ni. Importantly, the combination of X-ray photoelectron spectroscopy and near-edge X-ray adsorption fine structure analyses shows that γ-NiOOH is the surface-active phase for OER. Therefore, the combination of conductive sponge structure and N-doping modification opens a new avenue for fabricating new types of high-performance electrodes with application in electrochemical energy conversion devices.

Surface Characterization of Carbon-Bearing Magnetite (CBM) and Carbon-Bearing Ni(II)-Ferrite (CBNF)

1994 ◽  
Vol 344 ◽  
Author(s):  
T. Sano ◽  
K. Akanuma ◽  
M. Tsuji ◽  
Y. Tamaura
Keyword(s):  
Photoelectron Spectroscopy ◽  
Spinel Structure ◽  
Surface Characterization ◽  
Carbon Deposition ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Oxygen Ions ◽  
Diffraction Patterns

AbstractOxygen-deficient magnetite (ODM; Fe3O4-δ, δ>0) synthesized by reduction of magnetite with H2 at 300°C decomposed CO2 to carbon with an efficiency of nearly 100% at 300°C. In this reaction, two oxygen ions of the CO2 were incorporated into the spinel structure of ODM and carbon was deposited on the surface of ODM with zero valence to form visible particles. The particles of carbon separated from ODM were studied by Raman, energy-dispersive X-ray and wave-dispersive X-ray spectroscopies. The carbon which had been deposited on the ODM was found to be a mixture of graphite and amorphous carbon in at least two levels of crystallization. X-ray photoelectron spectroscopy and X-ray diffraction patterns of the carbon-bearing magnetite (CBM) showed no indication of carbide (Fe3C) or metallic iron (α-Fe) phase formation. In the C 1s XPS spectra of the CBM, no peaks were observed which could be assigned to CO2 or CO. X-ray diffractometry, chemical analysis and TG-MS measurement showed that the carbon-bearing Ni(II)-ferrite (CBNF) (Ni(II)/Fetotal = 0.15) synthesized by the carbon deposition reaction from CO2 with the H2-reduced Ni(II)-ferrite was represented by (Ni0.28Fe2.72O4.00)1-δ (Ni2+06.9Fe2+2.31O3.00)δCτ (δ= 0.27, τ= 0.17). The carbon of the CBNF gave the CIOlayer-like oxide containing some Ni2+ ions.

Synthesis, structure and photocatalytic degradation of organic dyes of a copper(II) metal–organic framework (Cu–MOF) with a 4-coordinated three-dimensional CdSO4 topology

2019 ◽  
Vol 75 (8) ◽  
pp. 1053-1059 ◽  
Author(s):  
Lin-Lu Qian ◽  
Zhi-Xiang Wang ◽  
Hai-Xin Tian ◽  
Min Li ◽  
Bao-Long Li ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Crystal Engineering ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Metal Organic Framework ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metal Organic ◽  
And Storage

Metal–organic frameworks (MOFs) have attracted much interest in the fields of gas separation and storage, catalysis synthesis, nonlinear optics, sensors, luminescence, magnetism, photocatalysis gradation and crystal engineering because of their diverse properties and intriguing topologies. A Cu–MOF, namely poly[[(μ2-succinato-κ2 O:O′){μ2-tris[4-(1,2,4-triazol-1-yl)phenyl]amine-κ2 N:N′}copper(II)] dihydrate], {[Cu(C4H4O4)(C24H18N10)]·2H2O} n or {[Cu(suc)(ttpa)]·2H2O} n , (I), was synthesized by the hydrothermal method using tris[4-(1,2,4-triazol-1-yl)phenyl]amine (ttpa) and succinate (suc2−), and characterized by IR, powder X-ray diffraction (PXRD), luminescence, optical band gap and valence band X-ray photoelectron spectroscopy (VB XPS). Cu–MOF (I) shows a twofold interpenetrating 4-coordinated three-dimensional CdSO4 topology with point symbol {65·8}. It presents good photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) under visible-light irradiation. A photocatalytic mechanism was proposed and confirmed.

A novel dinuclear bismuth(III) coordination compound: bis(μ-pyridine-2,6-dicarboxylato)-κ4O2,N,O6:O6′;κ4O2:O2′,N,O6-bis[(azido-κN)(1,10-phenanthroline-κ2N,N′)bismuth(III)] tetrahydrate

2014 ◽  
Vol 70 (6) ◽  
pp. 562-565 ◽  
Author(s):  
Wei Zhang ◽  
Yu-Quan Feng
Keyword(s):  
Molecular Structure ◽  
Hydrogen Bonds ◽  
Coordination Compound ◽  
Photoelectron Spectroscopy ◽  
Three Dimensional ◽  
Water Molecules ◽  
Stacking Interactions ◽  
Coordination Geometry ◽  
X Ray Diffraction ◽  
X Ray

A novel dinuclear bismuth(III) coordination compound, [Bi2(C7H3NO4)2(N3)2(C12H8N2)2]·4H2O, has been synthesized by an ionothermal method and characterized by elemental analysis, energy-dispersive X-ray spectroscopy, IR, X-ray photoelectron spectroscopy and single-crystal X-ray diffraction. The molecular structure consists of one centrosymmetric dinuclear neutral fragment and four water molecules. Within the dinuclear fragment, each BiIIIcentre is seven-coordinated by three O atoms and four N atoms. The coordination geometry of each BiIIIatom is distorted pentagonal–bipyramidal (BiO3N4), with one azide N atom and one bridging carboxylate O atom located in axial positions. The carboxylate O atoms and water molecules are assembledviaO—H...O hydrogen bonds, resulting in the formation of a three-dimensional supramolecular structure. Two types of π–π stacking interactions are found, with centroid-to-centroid distances of 3.461 (4) and 3.641 (4) Å.

Study Behavior of XPS Spectra of Ni, Mn, Y and O in Y2NiMnO6 Ceramics

2015 ◽  
Vol 804 ◽  
pp. 97-103 ◽  
Author(s):  
Panakamon Deeyai ◽  
Thanapong Sareein ◽  
Bundit Putasaeng ◽  
Naphat Chathirat
Keyword(s):  
Photoelectron Spectroscopy ◽  
Ceramic Materials ◽  
Effect Of Temperature ◽  
Decomposition Technique ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Study Behavior ◽  
Sintering Time ◽  
Effects Of Temperature

Bulk Y2NiMnO6 samples were prepared by thermal decomposition technique at 800 °C for 6 hours. The effects of temperature on the structure of ceramics were investigated for different sintering temperatures in the range of 1000-1300 °C, while kept constant the sintering time of 12 hours. Structural characterization had been investigated via X-ray diffraction (XRD) on samples of different sintering temperatures. Results from the experiment had revealed that high temperature affected oxide in ceramic materials. Further analysis with X-ray photoelectron spectroscopy (XPS) technique had revealed an outstanding point of ceramics by investigating the Ni 2p, 2p3/2, Mn 2p1/2, 2p3/2, and Y 3d3/2, 3d5/2 at the surface of Y2NiMnO6 ceramics. The changes in relative intensity of XPS peaks and the shifts in their binding energy (eV) were observed in the results, while the effect of temperature on oxide in ceramics may be investigated with dielectric property in the future.

scholarly journals Study of oxygen evolution reaction on thermally prepared xPtOy-(100-x)IrO2 electrodes

2020 ◽  
Vol 10 (4) ◽  
pp. 347-360
Author(s):  
Ollo Kambiré ◽  
Lemeyonouin A. G. Pohan ◽  
Konan H. Kondro ◽  
Lassiné Ouattara
Keyword(s):  
Surface Area ◽  
Oxygen Evolution ◽  
Photoelectron Spectroscopy ◽  
Oxygen Evolution Reaction ◽  
Active Sites ◽  
Platinum Oxide ◽  
Basic Medium ◽  
X Ray ◽  
Tafel Slopes ◽  
Ohmic Drop

The mixed coupled xPtOy-(100-x)IrO2 electrodes (x = 0, 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100) were thermally prepared at 450 °C on titanium supports. The prepared electrodes were firstly physically characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Afterwards, electrochemical characteri­zations were performed by voltammetric (cyclic and linear) methods in different electrolyte media (KOH and HClO4). It is shown that the prepared electrodes are composed by both PtOy (platinum and platinum oxide) and IrO2 (iridium dioxide). For xPtOy-(100-x)IrO2 electrodes having higher content of IrO2, more surface cracks and pores are formed, defining a higher surface area with more active sites. Higher surface area due to presence of both PtOy and IrO2, is for xPtOy-(100-x)IrO2 electrodes in 1 M KOH solution confirmed by cyclic voltammetry at potentials of the oxide layer region. For all prepared electrodes, voltammetric charges were found higher than for PtOy, while the highest voltammetric charge is observed for the mixed 40PtOy-60IrO2 (x = 40) electrode. The Tafel slopes for oxygen evolution reaction (OER) in either basic (0.1 M KOH) or acid (0.1 M HClO4) media were determined from measured linear voltammograms corrected for the ohmic drop. The values of Tafel slopes for OER at PtOy, 90PtOy-10IrO2 and IrO2 in basic medium are 122, 55 and 40 mV dec-1, respectively. For other mixed electrodes, Tafel slopes of 40 mV dec-1 were obtained. Although proceeding by different OER mechanism, similar values of Tafel slopes were obtained in acid medium, i.e., Tafel slopes of 120, 60 and 39 mV dec-1 were obtained for PtOy, 90PtOy-10IrO2 and IrO2, and 40 mV dec-1 for other mixed electrodes. The analysis of Tafel slope values showed that OER is more rapid on coupled mixed electrodes than on pure PtOy. For mixed xPtOy-(100-x)IrO2 electrodes, OER is more rapid when the molar percent of PtOy meets the following condition: 0 ˂ x ≤ 80. This study also showed that the mixed coupled electrodes are more electro­cata­lytically active for OER than either PtOy or IrO2 in these two media. 

Sign in / Sign up

Export Citation Format

Share Document