scholarly journals Enhancement by Metallic Tube Filling of the Mechanical Properties of Electromagnetic Wave Absorbent Polymethacrylimide Foam

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 372 ◽  
Author(s):  
Leilei Yan ◽  
Wei Jiang ◽  
Chun Zhang ◽  
Yunwei Zhang ◽  
Zhiheng He ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electromagnetic Wave ◽  
Energy Absorption ◽  
Structural Integrity ◽  
Compressive Loading ◽  
Metallic Tube ◽  
Foaming Process ◽  
Novel Structure ◽  
Load Carrying ◽  
Tube Filling

By the addition of a carbon-based electromagnetic absorbing agent during the foaming process, a novel electromagnetic absorbent polymethacrylimide (PMI) foam was obtained. The proposed foam exhibits excellent electromagnetic wave-absorbing properties, with absorptivity exceeding 85% at a large frequency range of 4.9–18 GHz. However, its poor mechanical properties would limit its application in load-carrying structures. In the present study, a novel enhancement approach is proposed by inserting metallic tubes into pre-perforated holes of PMI foam blocks. The mechanical properties of the tube-enhanced PMI foams were studied experimentally under compressive loading conditions. The elastic modulus, compressive strength, energy absorption per unit volume, and energy absorption per unit mass were increased by 127.9%, 133.8%, 54.2%, and 46.4%, respectively, by the metallic tube filling, and the density increased only by 5.3%. The failure mechanism of the foams was also explored. We found that the weaker interfaces between the foam and the electromagnetic absorbing agent induced crack initiation and subsequent collapses, which destroyed the structural integrity. The excellent mechanical and electromagnetic absorbing properties make the novel structure much more competitive in electromagnetic wave stealth applications, while acting simultaneously as load-carrying structures.

scholarly journals Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 506
Author(s):  
J. M. Prabhudass ◽  
K. Palanikumar ◽  
Elango Natarajan ◽  
Kalaimani Markandan
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Energy Absorption ◽  
Epoxy Matrix ◽  
Structural Integrity ◽  
High Energy ◽  
Natural Fibre ◽  
Impact Testing ◽  
Hibiscus Cannabinus ◽  
Natural Fibres

Recently, there has been an inclination towards natural fibre reinforced polymer composites owing to their merits such as environmental friendliness, light weight and excellent strength. In the present study, six laminates were fabricated consisting of natural fibres such as Kenaf fibre (Hibiscus cannabinus L.) and Bamboo fibre, together with multi-walled carbon nanotubes (MWCNTs) as reinforcing fillers in the epoxy matrix. Mechanical testing revealed that hybridization of natural fibres was capable of yielding composites with enhanced tensile properties. Additionally, impact testing showed a maximum improvement of ≈80.6% with the inclusion of MWCNTs as nanofiller in the composites with very high energy absorption characteristics, which were attributed to the high specific energy absorption of carbon nanotubes. The viscoelastic behaviour of hybridised composites reinforced with MWCNTs also showed promising results with a significant improvement in the glass transition temperature (Tg) and 41% improvement in storage modulus. It is worth noting that treatment of the fibres in NaOH solution prior to composite fabrication was effective in improving the interfacial bonding with the epoxy matrix, which, in turn, resulted in improved mechanical properties.

Mechanical properties of the parenchyma of potato (Solanum tuberosum cv. Russet Burbank)

1996 ◽  
Vol 74 (6) ◽  
pp. 859-869 ◽  
Author(s):  
C. H. Pang ◽  
M. G. Scanlon
Keyword(s):  
Mechanical Properties ◽  
Energy Absorption ◽  
Uniaxial Compression ◽  
Compressive Loading ◽  
Shear Stiffness ◽  
Small Strain ◽  
Oscillatory Shear ◽  
Plant Materials ◽  
Short And Long Term

The mechanical properties of plant materials and plant structures influence the form, function, distribution, and utilization of plants. The shear and compressive stiffnesses of different regions of potato parenchyma were measured to more fully characterize the mechanical properties of this important storage organ. Measurements were performed on tubers that had been stored for 1 and 10 months. Slices and cylinders of parenchyma were excised from the centre of the tubers in three directions (and slices from the outer portion in two directions). Slices were subjected to small-strain oscillatory shear at frequencies of 0.02, 0.2, and 2 Hz. Cylinders were subjected to three cycles of uniaxial compression at 2 and 20 cm∙min−1. The coefficient of variation of measured parameters ranged on average from 16 to 44% for both crops and both tests. At small strains, potato parenchyma behaved essentially as an elastic material. The results from both small-strain oscillatory shear and uniaxial compression suggested that potato parenchyma is anisotropic in nature. Slices from the outer and inner regions of the tuber had different shear stiffness values. The shear stiffness of tubers stored for 1 month was approximately 70% greater than those stored for 10 months. Repeated compressive loading of potato parenchyma cylinders ameliorated the differences in stiffness and energy absorption between short- and long-term stored tubers, attributable to movement of fluids from the cells during compression. The observations emphasize the complexity of potato tissue and how its mechanical properties change during storage. Keywords: shear, compression, energy absorption, stiffness, turgor, storage, anisotropicity.

scholarly journals Influence of Different Percentages of Binders on the Physico-Mechanical Properties of Rhizophora spp. Particleboard as Natural-Based Tissue-Equivalent Phantom for Radiation Dosimetry Applications

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1868
Author(s):  
Siti Hajar Zuber ◽  
Nurul Ab. Aziz Hashikin ◽  
Mohd Fahmi Mohd Yusof ◽  
Mohd Zahri Abdul Aziz ◽  
Rokiah Hashim
Keyword(s):  
Mechanical Properties ◽  
Radiation Dosimetry ◽  
Structural Integrity ◽  
Soy Flour ◽  
Lower Percentage ◽  
Internal Bonding ◽  
X Ray ◽  
Tissue Equivalent ◽  
Tissue Equivalent Phantom ◽  
Edx Analyses

Rhizophora spp. particleboard with the incorporation of lignin and soy flour as binders were fabricated and the influence of different percentages of lignin and soy flour (0%, 6% and 12%) on the physico-mechanical properties of the particleboard were studied. The samples were characterised by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray fluorescence (XRF) and internal bonding. The results stipulated that the addition of binders in the fabrication of the particleboard did not change the functional groups according to the FTIR spectrum. For XRD, addition of binders did not reveal any major transformation within the composites. SEM and EDX analyses for all percentages of binders added showed no apparent disparity; however, it is important to note that the incorporation of binders allows better bonding between the molecules. In XRF analysis, lower percentage of chlorine in the adhesive-bonded samples may be advantageous in maintaining the natural properties of the particleboard. In internal bonding, increased internal bond strength in samples with binders may indicate better structural integrity and physico-mechanical strength. In conclusion, the incorporation of lignin and soy flour as binders may potentially strengthen and fortify the particleboard, thus, can be a reliable phantom in radiation dosimetry applications.

scholarly journals Study on improvement of prefolded energy absorption device to constant resistance and its mechanical properties

2021 ◽  
Vol 104 (3) ◽  
pp. 003685042110368
Author(s):  
Dong An ◽  
Jiaqi Song ◽  
Hailiang Xu ◽  
Jingzong Zhang ◽  
Yimin Song ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Absorption ◽  
Compression Test ◽  
Side Wall ◽  
Concave Side ◽  
Displacement Curve ◽  
Static Compression ◽  
Constant Resistance ◽  
The Impact ◽  
Force Displacement

When the rock burst occurs, energy absorption support is an important method to solve the impact failure. To achieve constant resistance performance of energy absorption device, as an important component of the support, the mechanical properties of one kind of prefolded tube is analyzed by quasi-static compression test. The deformation process of compression test is simulated by ABAQUS and plastic strain nephogram of the numerical model are studied. It is found that the main factors affecting the fluctuation of force-displacement curve is the stiffness of concave side wall. The original tube is improved to constant resistance by changing the side wall. The friction coefficient affects the folding order and form of the energy absorbing device. Lifting the concave side wall stiffness can improve the overall stiffness of energy absorption device and slow down the falling section of force-displacement curve. It is always squeezed by adjacent convex side wall in the process of folding, with large plastic deformation. Compared with the original one, the improved prefolded tube designed in this paper can keep the maximum bearing capacity ( Pmax), increase the total energy absorption ( E), improve the specific energy absorption (SEA), and decrease the variance ( S2) of force-displacement curve.

scholarly journals Regulating Effect of Cement Accelerator on High Content Solid-Wastes Autoclaved Aerated Concrete (HCS-AAC) Slurry Performance and Subsequent Influence

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 799
Author(s):  
Dingkun Xie ◽  
Lixiong Cai ◽  
Jie Wang
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Solid Wastes ◽  
Hydration Products ◽  
Promoting Effect ◽  
Adverse Side Effects ◽  
Foaming Process ◽  
Carbide Slag ◽  
Negative Effect ◽  
Aerated Concrete

Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile, the affiliated effects on the physical-mechanical properties and hydration products were discussed to evaluate the applicability and influence of the cement accelerator. The hydration products were characterized by mineralogical (XRD) and thermal analysis (DSC-TG). The results indicated that substituting carbide slag for quicklime retarded slurry foaming and curing progress; meanwhile, the induced mechanical property declination had a negative effect on the generation of C–S–H (I) and tobermorite. Na2SO4 and Na2O·2.0SiO2 can effectively accelerate the slurry foaming rate, but the promoting effect on slurry thickening was inconspicuous. The compressive strength of HCS-AAC obviously declined with increasing cement coagulant content, which was mainly ascribed to the decrease in bulk density caused by the accelerating effect on the slurry foaming process. Dosing Na2SO4 under 0.4% has little effect on the generation of strength contributing to hydration products while the addition of Na2O·2.0SiO2 can accelerate the generation and crystallization of C–S–H, which contributed to the high activity gelatinous SiO2 generated from the reaction between Na2O·2.0SiO2 and Ca(OH)2.

scholarly journals Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4145
Author(s):  
He Xue ◽  
Zheng Wang ◽  
Shuai Wang ◽  
Jinxuan He ◽  
Hongliang Yang
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Welded Joints ◽  
Structural Integrity ◽  
Material Interfaces ◽  
Mechanical Heterogeneity ◽  
Finite Element Software ◽  
Dissimilar Metal ◽  
Stress Changes

Dissimilar metal welded joints (DMWJs) possess significant localized mechanical heterogeneity. Using finite element software ABAQUS with the User-defined Material (UMAT) subroutine, this study proposed a constitutive equation that may be used to express the heterogeneous mechanical properties of the heat-affected and fusion zones at the interfaces in DMWJs. By eliminating sudden stress changes at the material interfaces, the proposed approach provides a more realistic and accurate characterization of the mechanical heterogeneity in the local regions of DMWJs than existing methods. As such, the proposed approach enables the structural integrity of DMWJs to be analyzed in greater detail.

A machine learning approach to estimate the strain energy absorption in expanded polystyrene foams

2021 ◽  
pp. 0021955X2110210
Author(s):  
Alejandro E Rodríguez-Sánchez ◽  
Héctor Plascencia-Mora
Keyword(s):  
Neural Network ◽  
Energy Absorption ◽  
Mechanical Energy ◽  
Compressive Loading ◽  
Ground Truth ◽  
Expanded Polystyrene ◽  
Polystyrene Foam ◽  
Stress Strain ◽  
Ground Truth Data ◽  
Expanded Polystyrene Foam

Traditional modeling of mechanical energy absorption due to compressive loadings in expanded polystyrene foams involves mathematical descriptions that are derived from stress/strain continuum mechanics models. Nevertheless, most of those models are either constrained using the strain as the only variable to work at large deformation regimes and usually neglect important parameters for energy absorption properties such as the material density or the rate of the applying load. This work presents a neural-network-based approach that produces models that are capable to map the compressive stress response and energy absorption parameters of an expanded polystyrene foam by considering its deformation, compressive loading rates, and different densities. The models are trained with ground-truth data obtained in compressive tests. Two methods to select neural network architectures are also presented, one of which is based on a Design of Experiments strategy. The results show that it is possible to obtain a single artificial neural networks model that can abstract stress and energy absorption solution spaces for the conditions studied in the material. Additionally, such a model is compared with a phenomenological model, and the results show than the neural network model outperforms it in terms of prediction capabilities, since errors around 2% of experimental data were obtained. In this sense, it is demonstrated that by following the presented approach is possible to obtain a model capable to reproduce compressive polystyrene foam stress/strain data, and consequently, to simulate its energy absorption parameters.

Sign in / Sign up

Export Citation Format

Share Document