scholarly journals Regenerated Antheraea pernyi Silk Fibroin/Poly(N-isopropylacrylamide) Thermosensitive Composite Hydrogel with Improved Mechanical Strength

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 302 ◽  
Author(s):  
Boxiang Wang ◽  
Song Zhang ◽  
Yifan Wang ◽  
Bo Si ◽  
Dehong Cheng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silk Fibroin ◽  
In Situ Polymerization ◽  
Crosslinking Agent ◽  
Composite Hydrogel ◽  
Raw Material ◽  
Antheraea Pernyi ◽  
Composite Hydrogels ◽  
Polymerization Method

At present, Antheraea pernyi silk fibroin (ASF) has attracted research efforts to investigate it as a raw material for fabrication of biomedical devices because of its superior cytocompatibility. Nevertheless, native ASF is not easily processed into a hydrogel without any crosslinking agent, and a single hydrogel shows poor mechanical properties. In this paper, a series of ASF/poly (N-isopropylacrylamide) (PNIPAAm) composite hydrogels with different ASF contents were manufactured by a simple in situ polymerization method without any crosslinking agent. Meanwhile, the structures, morphologies and thermal properties of composite hydrogels were investigated by XRD, FTIR, SEM, DSC and TGA, respectively. The results indicate that the secondary structure of silk in the composite hydrogel can be controlled by changing the ASF content and the thermal stability of composite hydrogels is enhanced with an increase in crystalline structure. The composite hydrogels showed similar lower critical solution temperatures (LCST) at about 32 °C, which matched well with the LCST of PNIPAAm. Finally, the obtained thermosensitive composite hydrogels exhibited enhanced mechanical properties, which can be tuned by varying the content of ASF. This strategy to prepare an ASF-based responsive composite hydrogel with enhanced mechanical properties represents a valuable route for developing the fields of ASF, and, furthermore, their attractive applications can meet the needs of different biomaterial fields.

Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester

2014 ◽  
Vol 1015 ◽  
pp. 381-384
Author(s):  
Li Liu ◽  
Li Hai Cai ◽  
Dan Liu ◽  
Jun Xu ◽  
Bao Hua Guo
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Crystallization Temperature ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Single Fiber ◽  
Butylene Succinate ◽  
Crystallization Behaviors ◽  
Polymerization Method

The poly (butylene succinate) (PBS) and 3 wt% attapulgite (ATP) reinforced PBS/ATP nanocomposites with 1,6-hexanediol were fabricated using an in situ polymerization method. The crystallization behaviors indicated that ATP had effectively acted as nucleating agent, resulting in the enhancement on the crystallization temperature. The SEM results showed a superior interfacial linkage between ATP and PBS. Also, ATP could disperse as a single fiber and embed in the polymer matrix, which resulted in the improved mechanical properties.

scholarly journals The Effect of the Parameters of T-RTM on the Properties of Polyamide 6 Prepared by in Situ Polymerization

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 4 ◽  
Author(s):  
Orsolya Viktória Semperger ◽  
András Suplicz
Keyword(s):  
Mechanical Properties ◽  
Automotive Industry ◽  
Cycle Time ◽  
In Situ Polymerization ◽  
Rapid Development ◽  
Polyamide 6 ◽  
Raw Material ◽  
Short Cycle ◽  
Short Cycle Time

With the rapid development of the automotive industry, there is also a significant need to improve the raw materials used. Therefore, the demand is increasing for polymer composites with a focus on mass reduction and recyclability. Thermoplastic polymers are preferred because of their recyclability. As the automotive industry requires mass production, they require a thermoplastic raw material that can impregnate the reinforcement in a short cycle time. The most suitable monomer for this purpose is caprolactam. It can be most efficiently processed with T-RTM (thermoplastic resin transfer molding) technology, during which polyamide 6 is produced from the low-viscosity monomer by anionic ring-opening (in situ) polymerization in a tempered mold with a sufficiently short cycle time. Manufacturing parameters, such as polymerization time and mold temperature, highly influence the morphological and mechanical properties of the product. In this paper, the properties of polyamide 6 produced by T-RTM are analyzed as a function of the production parameters. We determine the crystallinity and the residual monomer content of the samples and their effect on mechanical properties.

Poly(vinyl alcohol)/graphene oxide nanocomposites prepared by in situ polymerization with enhanced mechanical properties and water vapor barrier properties

RSC Advances ◽  
2016 ◽  
Vol 6 (55) ◽  
pp. 49448-49458 ◽  
Author(s):  
Jiaojiao Ma ◽  
Ying Li ◽  
Xiande Yin ◽  
Yu Xu ◽  
Jia Yue ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Vinyl Alcohol ◽  
In Situ Polymerization ◽  
Barrier Properties ◽  
Poly Vinyl Alcohol ◽  
Water Vapor Barrier ◽  
One Step ◽  
Polymerization Method

A novel and one-stepin situpolymerization method for preparing the poly(vinyl alcohol) (PVA)/graphene oxide (GO) nanocomposites.

Fabrication of bionanocomposites reinforced with hemp nanocellulose and evaluation of their mechanical, thermal and dynamic mechanical properties

2021 ◽  
pp. 146442072110046
Author(s):  
SS Rana ◽  
MK Gupta
Keyword(s):  
Mechanical Properties ◽  
In Situ Polymerization ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
X Ray Diffraction ◽  
Dynamic Mechanical ◽  
Hemp Fibres ◽  
Polymerization Method

The present study aims to fabricate the epoxy-based bionanocomposites reinforced with hemp nanocellulose and the evaluation of their mechanical, thermal and dynamic mechanical properties. Nanocellulose from hemp fibres was isolated via the chemo-mechanical method and its bionanocomposites were prepared using the in situ polymerization method. Although many researchers have reported studies on the preparation and characterization of bionanocomposites however, studies on the mechanical, thermal, and dynamic mechanical properties of epoxy-based bionanocomposites reinforced with hemp nanocellulose are still unreported. The mechanical properties (i.e. tensile, flexural, hardness, and impact) and dynamic mechanical properties (i.e. glass transition temperature, damping behaviour, storage, and loss modulus) of the developed bionanocomposites were investigated. Further, the crystalline behaviour and thermal stability were also studied using the X-ray diffraction and thermogravimetric analysis techniques, respectively. The results revealed that an addition of nanocellulose considerably improved the mechanical, thermal, and viscoelastic properties of the bionanocomposites. As much as 52.17%, 48.17%, 89.08%, and 15.67% improvements in the tensile strength, flexural strength, impact strength, and hardness, respectively, for the 2 wt.% nanocellulose composites were found over the epoxy matrix.

Variations in the mechanical properties of bionanocomposites by water absorption

2021 ◽  
pp. 146442072199969
Author(s):  
SS Rana ◽  
MK Gupta
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Water Absorption ◽  
Water Uptake ◽  
In Situ Polymerization ◽  
Absorption Property ◽  
Maximum Water ◽  
Water Absorption Property ◽  
Polymerization Method

The present study aims to investigate the water absorption property and its effect on the mechanical properties (i.e. tensile, flexural, and impact) of bionanocomposites. The epoxy-based bionanocomposites were prepared by reinforcing the epoxy with 1, 2, 3, 4, and 5 wt% of nanocellulose using in situ polymerization method. The maximum water uptake by bionanocomposites was measured; however, the water absorption behavior was not found in accordance with Fickian’s diffusion model. In the present study, very low water absorption in the range of 0.17–0.34% was offered by bionanocomposites. The results obtained from the present experimental study suggested that there were a maximum degradation of 14.96% in tensile strength, 26.44% in flexural strength, and 55.66% in impact strength for bionanocomposites reinforced with 5 wt% of nanocellulose by water uptake.

High-performance textile electrodes for wearable electronics obtained by an improved in situ polymerization method

2019 ◽  
Vol 361 ◽  
pp. 897-907 ◽  
Author(s):  
Jingchun Lv ◽  
Peiwen Zhou ◽  
Linping Zhang ◽  
Yi Zhong ◽  
Xiaofeng Sui ◽  
...  
Keyword(s):  
High Performance ◽  
In Situ Polymerization ◽  
Wearable Electronics ◽  
Textile Electrodes ◽  
Polymerization Method

Mechanical Properties of Thermoplastic Composites via In Situ Polymerization from Cyclic Oligomers

2013 ◽  
Vol 750-752 ◽  
pp. 7-10
Author(s):  
Kou An Hao ◽  
Zhen Qing Wang ◽  
Li Min Zhou
Keyword(s):  
Mechanical Properties ◽  
In Situ Polymerization ◽  
High Viscosity ◽  
Thermoplastic Composites ◽  
Thermoplastic Matrix ◽  
Polymerization Catalyst ◽  
Short Beam ◽  
Beam Shear ◽  
Cyclic Oligomers

Fiber impregnation has been the main obstacle for thermoplastic matrix with high viscosity. This problem could be surmounted by adapting low viscous polymeric precursors Woven basalt fabric reinforced poly (butylenes terephthalate) composites were produced via in-situ polymerization at T=210°C. Before polymerization, catalyst was introduced to the reinforcement surface with different concentration. DSC is used to determine the polymerization and crystallization. SEM is used to detect whether the catalyst existed on surface. Both flexural and short-beam shear test are employed to study the corresponding mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document