scholarly journals Interfacial Compatibility Evaluation on the Fiber Treatment in the Typha Fiber Reinforced Epoxy Composites and Their Effect on the Chemical and Mechanical Properties

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1316 ◽  
Author(s):  
Samsul Rizal ◽  
Ikramullah ◽  
Deepu Gopakumar ◽  
Sulaiman Thalib ◽  
Syifaul Huzni ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Epoxy Composite ◽  
Fiber Composite ◽  
Alkali Treatment ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Pull Out ◽  
Interfacial Compatibility

Natural fiber composites have been widely used for various applications such as automotive components, aircraft components and sports equipment. Among the natural fibers Typha spp have gained considerable attention to replace synthetic fibers due to their unique nature. The untreated and alkali-treated fibers treated in different durations were dried under the sun for 4 h prior to the fabrication of Typha fiber reinforced epoxy composites. The chemical structure and crystallinity index of composites were examined via FT-IR and XRD respectively. The tensile, flexural and impact tests were conducted to investigate the effect of the alkali treated Typha fibers on the epoxy composite. From the microscopy analysis, it was observed that the fracture mechanism of the composite was due to the fiber and matrix debonding, fiber pull out from the matrix, and fiber damage. The tensile, flexural and impact strength of the Typha fiber reinforced epoxy composite were increased after 5% alkaline immersion compared to untreated Typha fiber composite. From these results, it can be concluded that the alkali treatment on Typha fiber could improve the interfacial compatibility between epoxy resin and Typha fiber, which resulted in the better mechanical properties and made the composite more hydrophobic. So far there is no comprehensive report about Typha fiber reinforcing epoxy composite, investigating the effect of the alkali treatment duration on the interfacial compatibility, and their effect on chemical and mechanical of Typha fiber reinforced composite, which plays a vital role to provide the overall mechanical performance to the composite.

Effect of Chemical Treatment on the Mechanical Properties of Luffa Fiber Reinforced Epoxy Composite

2020 ◽  
Vol 01 (02) ◽  
pp. 37-42 ◽  
Author(s):  
Dipto Chakrabarti ◽  
Md Shariful Islam ◽  
Kazi Jubair ◽  
Md Rashedul H Sarker
Keyword(s):  
Mechanical Properties ◽  
Chemical Treatment ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Flexural Modulus ◽  
Tensile Modulus ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Before And After ◽  
Flexural Tests

Novel luffa fiber reinforced epoxy composites are prepared and their mechanical properties are investigated before and after chemical treatment. The unique natural knitting structure of luffa provides an excellent reinforcement to the epoxy matrix. Knowing that the fiber-matrix bond gets stronger and imparts more strength to the composite when chemical treatment is done on fibers, composites are manufactured by untreated and treated luffa fiber using epoxy as a matrix. Luffa fiber is treated using benzoyl chloride and NaOH. Tensile and flexural tests are conducted on composites to investigate the effect of chemical treatment. Test results have shown that the chemical treatment on fibers improved the tensile strength, tensile modulus, flexural strength and flexural modulus by 27.21%, 49.37%, 41.84% and 6.44% respectively. Tensile modulus of luffa fiber composite is found to be higher compared with commonly used natural fiber composites. The experimental investigation suggests that, chemically treated luffa fiber reinforced epoxy composites could be a potential lightweight material in various applications.

Predictions of the Mechanical Performance of Leaf Fiber Thermoplastic Composites by FEA

2021 ◽  
Author(s):  
Faris M. AL-Oqla
Keyword(s):  
Composite Materials ◽  
Cantilever Beam ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Fiber Types ◽  
Natural Fiber Composites ◽  
Pull Out ◽  
Structural Applications

The available potential plant waste could be worthy material to strengthen polymers to make sustainable products and structural components. Therefore, modeling the natural fiber polymeric-based composites is currently required to reveal the mechanical performance of such polymeric green composites for various green products. This work numerically investigates the effect of various fiber types, fiber loading, and reinforcement conditions with different polymer matrices towards predicting the mechanical performance of such natural fiber composites. Cantilever beam and compression schemes were considered as two different mechanical loading conditions for structural applications of such composite materials. Finite element analysis was conducted to modeling the natural fiber composite materials. The interaction between the fibers and the matrices was considered as an interfacial friction force and was determined from experimental work by the pull out technique for each polymer and fiber type. Both polypropylene and polyethylene were considered as composite matrices. Olive and lemon leaf fibers were considered as reinforcements. Results have revealed that the deflection resistance of the natural fiber composites in cantilever beam was enhanced for several reinforcement conditions. The fiber reinforcement was capable of enhancing the mechanical performance of the polymers and was the best in case of 20 wt.% polypropylene/lemon composites due to better stress transfer within the composite. However, the 40 wt.% case was the worst in enhancing the mechanical performance in both cantilever beam and compression cases. The 30 wt.% of polyethylene/olive fiber was the best in reducing the deflection of the cantilever beam case. The prediction of mechanical performance of natural fiber composites via proper numerical analysis would enhance the process of selecting the appropriate polymer and fiber types. It can contribute finding the proper reinforcement conditions to enhance the mechanical performance of the natural fiber composites to expand their reliable implementations in more industrial applications.

scholarly journals Mechanical Properties of Banana Fabric and Kenaf Fiber Reinforced Epoxy Composites: Effect of Treatment and Hybridization

2019 ◽  
Vol 8 (10) ◽  
pp. 1870-1874
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Reinforced Composites ◽  
Synthetic Fiber ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite

Nowadays, Natural Fiber Reinforced composites (NFCs) are emerging to be a good substitute for synthetic fiber reinforced composites as NFCs have many advantages such as low density, high specific strength, recyclability, low cost and good sound abatement quality etc. Among all types of NFCs, a vast study has been done on banana fiber and kenaf fiber reinforced composite. However, only limited work has been done on the banana fabric, kenaf fiber reinforced composite and the effect of their hybridization on mechanical properties. In this paper, an attempt has been made to study the mechanical properties of the banana fabric, kenaf fiber and hybrid banana fabric/kenaf fiber reinforced composites. Effect of alkali treatment on kenaf fiber reinforced composite is discussed in the paper. For the present work, plain-woven banana fabric and randomly oriented kenaf fiber are used as reinforcement while the epoxy resin is used as a matrix. samples are fabricated using hand lay-up and vacuum bagging method. Curing is done at ambient temperature (250C-300C) for 48h. Tensile, impact and hardness test has been performed on a specimen according to ASTM standards. Improvement in mechanical properties is observed after alkali (6% NaOH) treatment on kenaf fiber reinforced composite. Tensile testing behavior of randomly oriented kenaf fiber composite has been studied using Finite element method and results are compared with experimental investigations. This topic present big potential because it seeks to find solution for sustainable development with environmental concerns.

scholarly journals Investigating Mechanical Properties of Carbon Glass Jute Fiber based Composite

2021 ◽  
Vol 23 (06) ◽  
pp. 923-931
Author(s):  
Sami Hamid ◽  
◽  
Abhishek Thakur ◽  
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Fiber Composite ◽  
Tensile Modulus ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Test Procedures ◽  
Additional Material ◽  
Reinforced Polymer

Hybrid composites are made by combining natural and synthetic fibers with an effective matrix, which usually means they’ve received additional strengthening, such as epoxy, to create the additional material properties you can’t obtain on their own. To attain the desirable tensile modulus, compressive modulus, and so on, a fiber composite needs to be added to the FRP (Fiber Reinforced Polymer). Polymer matrix composites are light and cost-effective to manufacture, but they still friendly to the environment and have viable applications, which is why they are often used in various commercial applications. Unidirectional fibers and bidirectionally reinforced with epoxy (SikaDur is a composite medium) carbon fibers are two-way reinforced with unidirectional (use unidirectional) Before we developed test procedures for preparing the test specimens, the testing lab implemented the layup method according to ASTM standards. Ten separate stacking sequences were tested and four different intensity sequences were used in testing the compressive structures according to ASTM D15. The results of the study indicate that hybridization helps natural fiber-reinforced polymer composites to increase their mechanical properties We would use natural fibers rather than synthetic ones since the natural ones make comparable strength when hybridized with synthetic ones.

scholarly journals Development and Testing of Pine Apple and Glass Fiber Reinforced Epoxy Hybrid Composites

2019 ◽  
Vol 8 (3) ◽  
pp. 2450-2453
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Glass Fiber Reinforced

Usage of Natural Fiber Composites (NFC) is increased rapidly due to the bio degradability nature of the fibers. These natural fibers are mixed with synthetic fibers to obtain better mechanical properties. In this study, pine apple and glass fiber reinforced epoxy composites are developed and their mechanical properties were evaluated. Composites were prepared by varying the fibers content and by using hand layup process with glass moulds of size 160 x 160 x 3 mm3 . The obtained laminates were sliced as per the ASTM criterion to test the properties. Higher glass fiber content in the composite specimen obtained higher mechanical properties. The composites can be utilized for the purpose of manufacturing components like doors panels, desks, roof tops etc.

scholarly journals Mechanical Characterization of Epoxy Filled with Seed Shells as Reinforcement

2019 ◽  
Vol 8 (4) ◽  
pp. 6972-6977
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Sodium Hydroxide ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Flexural Modulus ◽  
Natural Fibers ◽  
Epoxy Composites ◽  
The Matrix ◽  
Sunflower Seed Shells

The use of natural fiber composite has been widely promoted in many industries such as construction, automotive and even aerospace. Natural fibers can be extracted from plants that are abundantly available in the form of waste such as sunflower seed shells (SSS) and groundnut shells (GNS). These fibers were chosen as the reinforcement in epoxy to form composites. The performance of composites was evaluated following the ASTM D3039 and ASTM D790 for tensile and flexural tests respectively. Eight types of composites were prepared using SSS and GNS fibers as reinforcement and epoxy as the matrix with the fiber content of 20wt %. The fibers were untreated and treated with Sodium Hydroxide (NaOH) at various concentrations (6%, 10%, 15%, and 20%) and soaking time (24, 48 and 72 hours). The treatment has successfully enhanced the mechanical properties of both composites, namely SSS/epoxy and GNS/epoxy composites. The SSS/epoxy composite has the best mechanical properties when the fibers were treated for 48 hours using 6% of NaOH that produced 22 MPa and 13 MPa of tensile and flexural strength respectively. Meanwhile, the treatment on groundnut shells with 10% sodium Hydroxide for 24 hours has increased the Flexural strength tremendously (53%), however no significant effect on the tensile strength. The same trend was also observed on the tensile and flexural modulus. The increase of 41% in flexural modulus after treatment with 10% NaOH for 24 hours was also the evidence of mechanical properties enhancement. The evidence of improved fiber and matrix bonding after fiber treatment was also observed using a scanning electron microscope (SEM). The SSS/epoxy composites performed better in tensile application, meanwhile the GNS/epoxy composites are good in flexural application.

A Comparative Study between Jute and Glass Fiber Reinforced Composites

2021 ◽  
Vol 891 ◽  
pp. 125-130
Author(s):  
Subrata Chandra Das ◽  
Debasree Paul ◽  
Mubarak Ahmad Khan ◽  
Sotirios A. Grammatikos ◽  
Styliani Papatzani
Keyword(s):  
Mechanical Properties ◽  
Comparative Study ◽  
Polymer Composites ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Reinforced Polymer ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites

Recently, natural fiber reinforced polymer composites have become popular over traditional synthetic fiber reinforced polymer composites for automotive, low demanding structural and semi-structural applications. In this work, a comparative study of a natural fiber composite such as jute fabric composite (JFRP) and synthetic fiber composite such as glass fiber composite (GFRP) is presented. The composites were manufactured using hand lay-up and then curing at 90°C for 10 min in a hot press, followed by 24 h room temperature post-curing. The mechanical properties such as tensile and bending of JFRP and GFRP composites, were evaluated and compared. It was revealed that even if GFRPs exhibited significantly higher mechanical properties than JFRPs, environmental impact would still favor JFRPs for non-structural and low load bearing applications.

scholarly journals Mechanical Performance and Moisture Absorption of Unidirectional Bamboo Fiber Polyester Composite

2018 ◽  
Vol 911 ◽  
pp. 88-94 ◽  
Author(s):  
Omid Nabinejad ◽  
Sujan Debnath ◽  
Jack Kai Beh ◽  
Mohammad Yeakub Ali
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Alkali Treatment ◽  
Bamboo Fiber ◽  
Synthetic Fiber ◽  
Moisture Uptake ◽  
Polyester Composite ◽  
Bamboo Fibers

Bamboo fibers as a natural fiber offer numerous advantages such as high specific strength over synthetic fiber when used as reinforcing fiber for polymer composites. Yet the hydrophilic nature of bamboo fibers with high moisture absorption results in incompatibility in between bamboo fibers and unsaturated polyester resin. An experimental study was carried out to investigate the effects of alkali treatment of bamboo fiber on the mechanical properties and water sorption properties of polyester composite. The result revealed that, the bamboo fiber polyester composite with 5% Alkali treated bamboo fiber possesses the highest mechanical properties. Besides, Alkali treated fibers composite showed a significant reduction in moisture uptake compared to untreated fibers, where composite with 7% Alkali treated showed the lowest moisture uptake.

Sign in / Sign up

Export Citation Format

Share Document