scholarly journals Tuning Carbon Dots’ Optoelectronic Properties with Polymers

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1312 ◽  
Author(s):  
Konstantinos Dimos
Keyword(s):  
Quantum Yield ◽  
Spectral Range ◽  
Carbon Dots ◽  
Surface Passivation ◽  
Low Cost ◽  
Quality Characteristics ◽  
Optoelectronic Properties ◽  
Quantum Yields

Due to their unique properties of photoluminescence, biocompatibility, photostability, ease of preparing, and low cost, carbon dots have been studied extensively over the last decade. Soon after their discovery, it was realized that their main optical attributes may be protected, enhanced, and tuned upon proper surface passivation or functionalization. Therefore, up to date, numerous polymers have been used for these purposes, resulting to higher-quality carbon dots regarding their quantum yield or further emission-related aspects and compared to the primitive, bare ones. Hence, this review aims to clarify the polymers’ role and effect on carbon dots and their features focusing on the quality characteristics of their photoluminescence upon passivation or functionalization. Given in fact the numbers of relevant publications, emphasis is given on recent articles capturing the latest advances for polymers in carbon dots for expanding emission lifetimes, advancing quantum yields, tuning emission wavelengths, enhancing specific spectral range absorption, and tailoring optoelectronic properties in general.

Surface Passivation by Congeneric Quantum Dots for High-Performance and Stable CsPbBr3-Based Photodetectors

2021 ◽  
Author(s):  
Shikai Yan ◽  
Sheng Tang ◽  
Manman Luo ◽  
Lu Xue ◽  
Shilin Liu ◽  
...  
Keyword(s):  
Quantum Dots ◽  
High Performance ◽  
Surface Passivation ◽  
Low Cost ◽  
Optoelectronic Properties ◽  
Solution Processing

CsPbBr3-based photodetectors (PDs) have aroused enormous attention owing to their low-cost solution processing, outstanding optoelectronic properties, and remarkable stability. However, their performances remain a big challenge to meet the requirement...

scholarly journals Hybridisation of perovskite nanocrystals with organic molecules for highly efficient liquid scintillators

2020 ◽  
Vol 9 (1) ◽  
Author(s):  
Sangeun Cho ◽  
Sungwoo Kim ◽  
Jongmin Kim ◽  
Yongcheol Jo ◽  
Ilhwan Ryu ◽  
...  
Keyword(s):  
Quantum Yield ◽  
Organic Molecules ◽  
Liquid Scintillator ◽  
Low Cost ◽  
Radiation Detection ◽  
Quantum Yields ◽  
X Ray ◽  
Highly Efficient ◽  
X Ray Imaging ◽  
New Generation

Abstract Compared with solid scintillators, liquid scintillators have limited capability in dosimetry and radiography due to their relatively low light yields. Here, we report a new generation of highly efficient and low-cost liquid scintillators constructed by surface hybridisation of colloidal metal halide perovskite CsPbA3 (A: Cl, Br, I) nanocrystals (NCs) with organic molecules (2,5-diphenyloxazole). The hybrid liquid scintillators, compared to state-of-the-art CsI and Gd2O2S, demonstrate markedly highly competitive radioluminescence quantum yields under X-ray irradiation typically employed in diagnosis and treatment. Experimental and theoretical analyses suggest that the enhanced quantum yield is associated with X-ray photon-induced charge transfer from the organic molecules to the NCs. High-resolution X-ray imaging is demonstrated using a hybrid CsPbBr3 NC-based liquid scintillator. The novel X-ray scintillation mechanism in our hybrid scintillators could be extended to enhance the quantum yield of various types of scintillators, enabling low-dose radiation detection in various fields, including fundamental science and imaging.

Self-formed C-dot-based 2D polysiloxane with high photoluminescence quantum yield and stability

Nanoscale ◽  
2020 ◽  
Vol 12 (19) ◽  
pp. 10771-10780
Author(s):  
Guangqi Hu ◽  
Xiaokai Xu ◽  
Bingfu Lei ◽  
Jianle Zhuang ◽  
Xuejie Zhang ◽  
...  
Keyword(s):  
Quantum Yield ◽  
Carbon Dots ◽  
Fluorescence Emission ◽  
Quantum Yields ◽  
Dual Fluorescence ◽  
Photoluminescence Quantum Yield ◽  
Si Doped ◽  
Doped Carbon Dots

A novel 2D polysiloxane embedded with Si-doped-carbon-dots was synthesized, which shows dual-fluorescence emission, and high photoluminescence quantum yields and stability.

scholarly journals Simultaneously Regulating Uniform Zn2+ Flux and Electron Conduction by MOF/rGO Interlayers for High-Performance Zn Anodes

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ziqi Wang ◽  
Liubing Dong ◽  
Weiyuan Huang ◽  
Hao Jia ◽  
Qinghe Zhao ◽  
...  
Keyword(s):  
High Performance ◽  
Surface Passivation ◽  
Coulombic Efficiency ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Growth Surface ◽  
Electron Conduction ◽  
Reduced Graphene ◽  
Metal Organic ◽  
Further Development

AbstractOwing to the merits of low cost, high safety and environmental benignity, rechargeable aqueous Zn-based batteries (ZBs) have gained tremendous attention in recent years. Nevertheless, the poor reversibility of Zn anodes that originates from dendrite growth, surface passivation and corrosion, severely hinders the further development of ZBs. To tackle these issues, here we report a Janus separator based on a Zn-ion conductive metal–organic framework (MOF) and reduced graphene oxide (rGO), which is able to regulate uniform Zn2+ flux and electron conduction simultaneously during battery operation. Facilitated by the MOF/rGO bifunctional interlayers, the Zn anodes demonstrate stable plating/stripping behavior (over 500 h at 1 mA cm−2), high Coulombic efficiency (99.2% at 2 mA cm−2 after 100 cycles) and reduced redox barrier. Moreover, it is also found that the Zn corrosion can be effectively retarded through diminishing the potential discrepancy on Zn surface. Such a separator engineering also saliently promotes the overall performance of Zn|MnO2 full cells, which deliver nearly 100% capacity retention after 2000 cycles at 4 A g−1 and high power density over 10 kW kg−1. This work provides a feasible route to the high-performance Zn anodes for ZBs.

scholarly journals Ruthenium-based PACT agents based on bisquinoline chelates: synthesis, photochemistry, and cytotoxicity

2021 ◽  
Author(s):  
Anja Busemann ◽  
Ingrid Flaspohler ◽  
Xue-Quan Zhou ◽  
Claudia Schmidt ◽  
Sina K. Goetzfried ◽  
...  
Keyword(s):  
Quantum Yield ◽  
Singlet Oxygen ◽  
Cancer Cells ◽  
Cellular Uptake ◽  
Ruthenium Complex ◽  
Human Cancer ◽  
Light Irradiation ◽  
Quantum Yields ◽  
Light Activation ◽  
Human Cancer Cells

AbstractThe known ruthenium complex [Ru(tpy)(bpy)(Hmte)](PF6)2 ([1](PF6)2, where tpy = 2,2’:6’,2″-terpyridine, bpy = 2,2’-bipyridine, Hmte = 2-(methylthio)ethanol) is photosubstitutionally active but non-toxic to cancer cells even upon light irradiation. In this work, the two analogs complexes [Ru(tpy)(NN)(Hmte)](PF6)2, where NN = 3,3'-biisoquinoline (i-biq, [2](PF6)2) and di(isoquinolin-3-yl)amine (i-Hdiqa, [3](PF6)2), were synthesized and their photochemistry and phototoxicity evaluated to assess their suitability as photoactivated chemotherapy (PACT) agents. The increase of the aromatic surface of [2](PF6)2 and [3](PF6)2, compared to [1](PF6)2, leads to higher lipophilicity and higher cellular uptake for the former complexes. Such improved uptake is directly correlated to the cytotoxicity of these compounds in the dark: while [2](PF6)2 and [3](PF6)2 showed low EC50 values in human cancer cells, [1](PF6)2 is not cytotoxic due to poor cellular uptake. While stable in the dark, all complexes substituted the protecting thioether ligand upon light irradiation (520 nm), with the highest photosubstitution quantum yield found for [3](PF6)2 (Φ[3] = 0.070). Compounds [2](PF6)2 and [3](PF6)2 were found both more cytotoxic after light activation than in the dark, with a photo index of 4. Considering the very low singlet oxygen quantum yields of these compounds, and the lack of cytotoxicity of the photoreleased Hmte thioether ligand, it can be concluded that the toxicity observed after light activation is due to the photoreleased aqua complexes [Ru(tpy)(NN)(OH2)]2+, and thus that [2](PF6)2 and [3](PF6)2 are promising PACT candidates. Graphic abstract

A green synthetic route for the surface-passivation of carbon dots as an effective multifunctional fluorescent sensor for the recognition and detection of toxic metal ions from aqueous solution

2019 ◽  
Vol 11 (4) ◽  
pp. 490-506 ◽  
Author(s):  
K. Radhakrishnan ◽  
P. Panneerselvam ◽  
M. Marieeswaran
Keyword(s):  
Aqueous Solution ◽  
Quantum Dots ◽  
Carbon Dots ◽  
Surface Passivation ◽  
Fluorescent Sensor ◽  
Toxic Metal ◽  
Carbon Quantum Dots ◽  
Synthetic Route ◽  
One Pot ◽  
Hydrothermal Methods

In this work, a green synthetic route was used to create a number of surface passivated fluorescent carbon quantum dots, which are explored as promising sensing probes, via facile one-pot hydrothermal methods.

Quantum yield of solution photolysis of bicyclo[3.1.0]hexan-3-one and derivatives

1981 ◽  
Vol 59 (11) ◽  
pp. 1607-1609 ◽  
Author(s):  
Karl R. Kopecky ◽  
Rodrigo Rico Gomez
Keyword(s):  
Quantum Yield ◽  
Quantum Yields

The quantum yields for photolysis of 0.25 M solutions of bicyclo[3.1.0]hexan-3-one, 1,5-dimethylbicyclo[3.1.0]hexan-3-one, and tricyclo[4.3.1.0]decan-8-one in pentane or cyclohexane with 313 nm light are 0.44, 0.52, and 0.32, respectively.

Highly sensitive, stable, and precise detection of dopamine with carbon dots/tyrosinase hybrid as fluorescent probe

RSC Advances ◽  
2014 ◽  
Vol 4 (87) ◽  
pp. 46437-46443 ◽  
Author(s):  
Hao Li ◽  
Juan Liu ◽  
Manman Yang ◽  
Weiqian Kong ◽  
Hui Huang ◽  
...  
Keyword(s):  
Fluorescent Probe ◽  
Carbon Dots ◽  
Low Cost ◽  
High Sensitivity ◽  
Highly Sensitive

The carbon dots/tyrosinase hybrid as a low-cost fluorescent probe for the detection of dopamine exhibits high sensitivity, stability, and precision.

Suppression of Halide Migration and Immobile Ionic Surface Passivation for Blue Perovskite Light-Emitting Diodes

2022 ◽  
Author(s):  
Chan Beom Park ◽  
Yun Seop Shin ◽  
Yung Jin Yoon ◽  
Hyungsu Jang ◽  
Jung Geon Son ◽  
...  
Keyword(s):  
Optical Properties ◽  
Light Emitting Diodes ◽  
Surface Passivation ◽  
Optoelectronic Properties ◽  
Light Emitting ◽  
Perovskite Nanocrystals

Cs-based perovskite nanocrystals (PeNCs) have been considered to be superb emitters for perovskite light-emitting diodes (PeLEDs) due to their remarkable optoelectronic properties. Still, poor optical properties are mainly attributed to...

Sign in / Sign up

Export Citation Format

Share Document