scholarly journals Effect of Different Compatibilizers on Sustainable Composites Based on a PHBV/PBAT Matrix Filled with Coffee Silverskin

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1256 ◽  
Author(s):  
Fabrizio Sarasini ◽  
Francesca Luzi ◽  
Franco Dominici ◽  
Gianluca Maffei ◽  
Annalaura Iannone ◽  
...  
Keyword(s):  
Linseed Oil ◽  
Extraction Procedure ◽  
Morphological Properties ◽  
Hydroxyl Groups ◽  
Scanning Calorimetry ◽  
Waste Products ◽  
Coffee Silverskin ◽  
Reinforcing Agent ◽  
Silane Modification ◽  
Compatibilization Effect

This work investigates the feasibility of using coffee silverskin (CSS), one of the most abundant coffee waste products, as a reinforcing agent in biopolymer-based composites. The effect of using two compatibilizers, a maleinized linseed oil (MLO) and a traditional silane (APTES, (3-aminopropyl)triethoxysilane), on mechanical and thermal behavior of sustainable composites based on a poly(butylene adipate-co-terephthalate/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PBAT/PHBV blend filled with coffee silverskin, in both the as-received state and after the extraction of antioxidants, was studied. Thermal (by differential scanning calorimetry), mechanical (by tensile testing), and morphological properties (by scanning electron microscopy) of injection molded biocomposites at three different weight contents (10, 20, and 30 wt %) were considered and discussed as a function of compatibilizer type. The effects of extraction procedure and silane treatment on surface properties of CSS were investigated by infrared spectroscopy. Obtained results confirmed that extracted CSS and silane-treated CSS provided the best combination of resistance properties and ductility, while MLO provided a limited compatibilization effect with CSS, due to the reduced amount of hydroxyl groups on CSS after extraction, suggesting that the effects of silane modification were more significant than the introduction of plasticizing agent.

scholarly journals The Effect of Varying Almond Shell Flour (ASF) Loading in Composites with Poly(Butylene Succinate (PBS) Matrix Compatibilized with Maleinized Linseed Oil (MLO)

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2179 ◽  
Author(s):  
Patricia Liminana ◽  
Luis Quiles-Carrillo ◽  
Teodomiro Boronat ◽  
Rafael Balart ◽  
Nestor Montanes
Keyword(s):  
Mechanical Properties ◽  
Linseed Oil ◽  
Thermomechanical Analysis ◽  
Hydroxyl Groups ◽  
Positive Contribution ◽  
Almond Shell ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Compatibilization Effect ◽  
Industrial Level

In this work poly(butylene succinate) (PBS) composites with varying loads of almond shell flour (ASF) in the 10–50 wt % were manufactured by extrusion and subsequent injection molding thus showing the feasibility of these combined manufacturing processes for composites up to 50 wt % ASF. A vegetable oil-derived compatibilizer, maleinized linseed oil (MLO), was used in PBS/ASF composites with a constant ASF to MLO (wt/wt) ratio of 10.0:1.5. Mechanical properties of PBS/ASF/MLO composites were obtained by standard tensile, hardness, and impact tests. The morphology of these composites was studied by field emission scanning electron microscopy—FESEM) and the main thermal properties were obtained by differential scanning calorimetry (DSC), dynamical mechanical-thermal analysis (DMTA), thermomechanical analysis (TMA), and thermogravimetry (TGA). As the ASF loading increased, a decrease in maximum tensile strength could be detected due to the presence of ASF filler and a plasticization effect provided by MLO which also provided a compatibilization effect due to the interaction of succinic anhydride polar groups contained in MLO with hydroxyl groups in both PBS (hydroxyl terminal groups) and ASF (hydroxyl groups in cellulose). FESEM study reveals a positive contribution of MLO to embed ASF particles into the PBS matrix, thus leading to balanced mechanical properties. Varying ASF loading on PBS composites represents an environmentally-friendly solution to broaden PBS uses at the industrial level while the use of MLO contributes to overcome or minimize the lack of interaction between the hydrophobic PBS matrix and the highly hydrophilic ASF filler.

Injectable in-situ Forming Depot Of Doxycycline Hyclate/α-Cyclodextrin Complex using PLGA for Periodontitis Treatment: Preparation, Charac-terization, and In-Vitro Evaluation

2020 ◽  
Vol 17 ◽  
Author(s):  
Elham Khodaverdi ◽  
Farhad Eisvand ◽  
Mohammad Sina Nezami ◽  
Seyedeh Nesa Rezaeian Shiadeh ◽  
Hossein Kamali ◽  
...  
Keyword(s):  
Complex Form ◽  
Docking Studies ◽  
Morphological Properties ◽  
Burst Release ◽  
Cyclodextrin Complex ◽  
Doxycycline Hyclate ◽  
Scanning Calorimetry ◽  
In Situ Forming

Background:: Doxycycline (DOX) is used in treating a bacterial infection, especially for periodontitis treatment. Objective: To reduce irritation of DOX for subgingival administration and increase the chemical stability and against enzy-matic, the complex of α-cyclodextrin with DOX was prepared and loaded into injectable in situ forming implant based on PLGA. Methods:: FTIR, molecular docking studies, X-ray diffraction, and differential scanning calorimetry was performed to char-acterize the DOX/α-cyclodextrin complex. Finally, the in-vitro drug release and modeling, morphological properties, and cellular cytotoxic effects were also evaluated. Results:: The stability of DOX was improved with complex than pure DOX. The main advantage of the complex is the al-most complete release (96.31 ± 2.56 %) of the drug within 14 days of the implant, whereas in the formulation containing the pure DOX and the physical mixture the DOX with α-cyclodextrin release is reached to 70.18 ± 3.61 % and 77.03 ± 3.56 %, respectively. This trend is due to elevate of DOX stability in the DOX/ α-cyclodextrin complex form within PLGA implant that confirmed by the results of stability. Conclusion:: Our results were indicative that the formulation containing DOX/α-cyclodextrin complex was biocompatible and sustained-release with minimum initial burst release.

Characterization of Nostoc muscorum NCCU-442 Derived Poly-3- hydroxybutyrate (PHB) and Polyethylene Glycol (PEG) Blends

2020 ◽  
Vol 10 (3) ◽  
pp. 200-207
Author(s):  
Sabbir Ansari ◽  
Tasneem Fatma
Keyword(s):  
Thermal Properties ◽  
Polyethylene Glycol ◽  
Morphological Properties ◽  
Morphological Alteration ◽  
Nostoc Muscorum ◽  
Microbial Culture ◽  
Polymer Science ◽  
Mixed Microbial Culture ◽  
Scanning Calorimetry ◽  
Casting Technique

Background: Poly-3-hydroxybutyrate (PHB) has attracted much consideration as biodegradable biocompatible polymer. This thermoplastic polymer has comparable material properties to polypropylene. Materials with more valuable properties may result from blending, a common practice in polymer science. Objective: In this paper, blends of PHB (extracted from cyanobacterium Nostoc muscorum NCCU- 442 with polyethylene glycol (PEG) were investigated for their thermal, tensile, hydrophilic and biodegradation properties. Methods: Blends were prepared in different proportions of PHB/PEG viz. 100/0, 98/2, 95/5, 90/10, 80/20, and 70/30 (wt %) using solvent casting technique. Morphological properties were investigated by using Scanning Electron Microscopy (SEM). Differential scanning calorimetry and thermogravimetric analysis were done for thermal properties determination whereas the mechanical and hydrophilic properties of the blends were studied by means of an automated material testing system and contact angle analyser respectively. Biodegradability potential of the blended films was tested as percent weight loss by mixed microbial culture within 60 days. Results: The blends showed good misciblity between PEG and PHB, however increasing concentrations of plasticizer caused morphological alteration as evidenced by SEM micrographs. PEG addition (10 % and above) showed significant alternations in the thermal properties of the blends. Increase in the PEG content increased the elongation at break ratio i.e enhanced the required plasticity of PHB. Rate of microbial facilitated degradation of the blends was greater with increasing PEG concentrations. Conclusion: Blending with PEG increased the crucial polymeric properties of cyanobacterial PHB.

scholarly journals Enhancement of Antioxidant and Hydrophobic Properties of Alginate via Aromatic Derivatization: Preparation, Characterization, and Evaluation

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2575
Author(s):  
Smaher M. Elbayomi ◽  
Haili Wang ◽  
Tamer M. Tamer ◽  
Yezi You
Keyword(s):  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Hydroxyl Group ◽  
Hydroxyl Groups ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Benzoyl Group ◽  
Antioxidant Evaluation ◽  
Thermo Stability

The preparation of bioactive polymeric molecules requires the attention of scientists as it has a potential function in biomedical applications. In the current study, functional substitution of alginate with a benzoyl group was prepared via coupling its hydroxyl group with benzoyl chloride. Fourier transform infrared spectroscopy indicated the characteristic peaks of aromatic C=C in alginate derivative at 1431 cm−1. HNMR analysis demonstrated the aromatic protons at 7.5 ppm assigned to benzoyl groups attached to alginate hydroxyl groups. Wetting analysis showed a decrease in hydrophilicity in the new alginate derivative. Differential scanning calorimetry and thermal gravimetric analysis showed that the designed aromatic alginate derivative demonstrated higher thermo-stability than alginates. The aromatic alginate derivative displayed high anti-inflammatory properties compared to alginate. Finally, the in vitro antioxidant evaluation of the aromatic alginate derivative showed a significant increase in free radical scavenging activity compared to neat alginate against DPPH (2,2-diphenyll-picrylhydrazyl) and ABTS free radicals. The obtained results proposed that the new alginate derivative could be employed for gene and drug delivery applications.

scholarly journals Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2523
Author(s):  
Franciszek Pawlak ◽  
Miguel Aldas ◽  
Francisco Parres ◽  
Juan López-Martínez ◽  
Marina Patricia Arrieta
Keyword(s):  
Linseed Oil ◽  
Microstructural Analysis ◽  
Dairy Industry ◽  
Poly Lactic Acid ◽  
Industry Waste ◽  
Wool Fibers ◽  
Molded Parts ◽  
Silane Modification ◽  
Injection Molded ◽  
Sheep Wool

Poly(lactic acid) (PLA) was plasticized with maleinized linseed oil (MLO) and further reinforced with sheep wool fibers recovered from the dairy industry. The wool fibers were firstly functionalized with 1 and 2.5 phr of tris(2-methoxyethoxy)(vinyl) (TVS) silane coupling agent and were further used in 1, 5, and 10 phr to reinforce the PLA/MLO matrix. Then, the composite materials were processed by extrusion, followed by injection-molding processes. The mechanical, thermal, microstructural, and surface properties were assessed. While the addition of untreated wool fibers to the plasticized PLA/MLO matrix caused a general decrease in the mechanical properties, the TVS treatment was able to slightly compensate for such mechanical losses. Additionally, a shift in cold crystallization and a decrease in the degree of crystallization were observed due to the fiber silane modification. The microstructural analysis confirmed enhanced interaction between silane-modified fibers and the polymeric matrix. The inclusion of the fiber into the PLA/MLO matrix made the obtained material more hydrophobic, while the yellowish color of the material increased with the fiber content.

scholarly journals Rheological, Thermal, Superficial, and Morphological Properties of Thermoplastic Achira Starch Modified with Lactic Acid and Oleic Acid

Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4433 ◽  
Author(s):  
Carolina Caicedo ◽  
Rocío Yaneli Aguirre Loredo ◽  
Abril Fonseca García ◽  
Omar Hernán Ossa ◽  
Aldo Vázquez Arce ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Oleic Acid ◽  
Complex Viscosity ◽  
Thermoplastic Starch ◽  
Residual Energy ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Rheological Analysis ◽  
Acid Agent

The modification of achira starch a thermoplastic biopolymer is shown. Glycerol and sorbitol, common plasticizers, were used in the molten state with organic acids such as oleic acid and lactic acid obtaining thermodynamically more stable products. The proportion of starch:plasticizer was 70:30, and the acid agent was added in portions from 3%, 6%, and 9% by weight. These mixtures were obtained in a torque rheometer for 10 min at 130 °C. The lactic acid managed to efficiently promote the gelatinization process by increasing the available polar sites towards the surface of the material; as a result, there were lower values in the contact angle, these results were corroborated with the analysis performed by differential scanning calorimetry and X-ray diffraction. The results derived from oscillatory rheological analysis had a viscous behavior in the thermoplastic starch samples and with the presence of acids; this behavior favors the transitions from viscous to elastic. The mixture of sorbitol or glycerol with lactic acid promoted lower values of the loss module, the storage module, and the complex viscosity, which means lower residual energy in the transition of the viscous state to the elastic state; this allows the compounds to be scaled to conventional polymer transformation processes.

GDC - Y 2 O 3 Oxide Based Two Phase Nanocomposite Electrolyte

2011 ◽  
Vol 8 (4) ◽  
Author(s):  
Rizwan Raza ◽  
Ghazanfar Abbas ◽  
S. Khalid Imran ◽  
Imran Patel ◽  
Bin Zhu
Keyword(s):  
Fuel Cell ◽  
Ionic Conductivities ◽  
Morphological Properties ◽  
Scanning Calorimetry ◽  
Two Phase ◽  
Composite Electrolyte ◽  
Significant Performance ◽  
Advanced Fuel ◽  
Nanocomposite Electrolyte ◽  
Scherrer Formula

Oxide based two phase composite electrolyte (Ce0.9Gd0.1O2–Y2O3) was synthesized by coprecipitation method. The nanocomposite electrolyte showed the significant performance of power density 785 mW cm−2 and higher conductivities at relatively low temperature 550°C. Ionic conductivities were measured with ac impedance spectroscopy and four-probe dc method. The structural and morphological properties of the prepared electrolyte were investigated by scanning electron microscope (SEM). The thermal stability was determined with differential scanning calorimetry. The particle size that was calculated with Scherrer formula, 15–20 nm, is in a good agreement with the SEM and X- ray diffraction results. The purpose of this study is to introduce the functional nanocomposite materials for advanced fuel cell technology to meet the challenges of solid oxide fuel cell.

scholarly journals Fully Biobased Epoxy Resins from Fatty Acids and Lignin

Molecules ◽  
2020 ◽  
Vol 25 (5) ◽  
pp. 1158 ◽  
Author(s):  
Pablo Ortiz ◽  
Richard Vendamme ◽  
Walter Eevers
Keyword(s):  
Epoxy Resin ◽  
Renewable Resources ◽  
Epoxy Resins ◽  
Linseed Oil ◽  
Tensile Tests ◽  
Present System ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Commodity Chemicals ◽  
Epoxidized Linseed Oil

The use of renewable resources for plastic production is an imperious need for the reduction of the carbon footprint and the transition towards a circular economy. With that goal in mind, fully biobased epoxy resins have been designed and prepared by combining epoxidized linseed oil, lignin, and a biobased diamine derived from fatty acid dimers. The aromatic structures in lignin provide hardness and strength to an otherwise flexible and breakable epoxy resin. The curing of the system was investigated by infrared spectroscopy and differential scanning calorimetry (DSC). The influence of the different components on the thermo-mechanical properties of the epoxy resins was analyzed by DSC, thermal gravimetric analysis (TGA), and tensile tests. As the content of lignin in the resin increases, so does the glass transition, the Young’s modulus, and the onset of thermal degradation. This correlation is non-linear, and the higher the percentage of lignin, the more pronounced the effect. All the components of the epoxy resin being commodity chemicals, the present system provides a realistic opportunity for the preparation of fully biorenewable resins at an industrial scale.

scholarly journals Environmentally Friendly Mesoporous Nanocomposite Prepared from Al-Dross Waste with Remarkable Adsorption Ability for Toxic Anionic Dye

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Inas A. Ahmed ◽  
Najlaa S. Al-Radadi ◽  
H. S. Hussein ◽  
Ahmed H. Ragab
Keyword(s):  
Crystal Size ◽  
Pore Radius ◽  
Morphological Properties ◽  
Anionic Dyes ◽  
Adsorption Ability ◽  
Waste Products ◽  
X Ray ◽  
Anionic Dye ◽  
Eriochrome Black T ◽  
Adsorption Desorption

In this work, a mesoporous nanocomposite composed of nanogibbsite (α-Al(OH)3) and nanosilica was prepared. Gibbsite nanoparticles (GNPs) with a crystal size of ≈38 nm were prepared from Al-dross industrial waste products in an acidic environment at 100°C. Nanosilica (NS) with a crystal size of ≈13 nm was prepared from sodium silicate using dilute hydrochloric acid. The deposition of nanosilica onto gibbsite particles was investigated. The mesoporous silica-gibbsite (NSG) nanocomposite was examined by evaluating its ability to adsorb the toxic anionic dye Eriochrome black T (EBT) from aqueous solution. The compositional and morphological properties of NSG nanocomposites were studied by means of the FTIR spectroscopy, X-ray fluorescence (XRF), XRD, SEM, and TEM techniques. The effect of dye concentration, pH, adsorbent dose, contact time, and temperature was investigated. The sorption models, the isotherms, and the thermodynamic parameters ΔHo, ΔGo, and ΔSo were evaluated. The N2 adsorption-desorption isotherms revealed that mixing the two prepared materials (NS and GNPs) to form the NSG nanocomposite resulted in good properties (a surface area of 62.34 m2·g−1, a pore radius of 22.717 nm, and a pore volume of 0.7081 cm3·g−1). The results show that the prepared NSG nanocomposite has a remarkable ability to adsorb toxic anionic dyes.

scholarly journals Application of Thermal Methods to Analyze the Properties of Coffee Silverskin and Oil Extracted from the Studied Roasting By-Product

2020 ◽  
Vol 10 (24) ◽  
pp. 8790
Author(s):  
Agata Górska ◽  
Rita Brzezińska ◽  
Magdalena Wirkowska-Wojdyła ◽  
Joanna Bryś ◽  
Ewa Domian ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Oxidative Stability ◽  
Reliable Data ◽  
Scanning Calorimetry ◽  
Thermal Methods ◽  
Modulated Differential Scanning Calorimetry ◽  
Coffee Silverskin ◽  
Derivative Thermogravimetry ◽  
Coffee Roasting

The aim of the study was to characterize the thermal properties of coffee silverskin and fat extracted from the material by using differential scanning calorimetry, modulated differential scanning calorimetry and thermogravimetry/derivative thermogravimetry. Additionally, the thermokinetic parameters, oxidative stability and fatty acid composition of the extracted oil were defined. Thermal decomposition of the studied coffee roasting by-product under oxygen occurred in three defined stages. The most significant changes in weight were observed in the region of 200–500 °C and correspond to polysaccharide decomposition. These results are in agreement with the data obtained from the differential scanning calorimetry curve. On the curve course of silverskin, two main exothermic peaks can be observed with a maximum at 265 and 340 °C. These exothermic events represent the transitions of hemicellulose and cellulose. Fat extracted from silverskin turned out to be a source of polyunsaturated fatty acids with the recommended n-6 to n-3 ratio reaching the value 4:1. The studied fat was characterized by low oxidative stability. Considering the obtained results, it can be stated that thermal analysis can provide fast and reliable data concerning the composition and properties of coffee silverskin and coffee silverskin oil.

Sign in / Sign up

Export Citation Format

Share Document