scholarly journals Polymers of ε-Caprolactone Using New Copper(II) and Zinc(II) Complexes as Initiators: Synthesis, Characterization and X-Ray Crystal Structures

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1239 ◽  
Author(s):  
Andrés Posada ◽  
Mario Macías ◽  
Santiago Movilla ◽  
Gian Miscione ◽  
León Pérez ◽  
...  
Keyword(s):  
Single Crystal ◽  
Ring Opening ◽  
Ring Opening Polymerization ◽  
Nmr Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molecular Weights ◽  
Full Characterization ◽  
Solvent Free Conditions

Five of six new Zn(II) and Cu(II) complexes were active in the ring-opening polymerization (ROP) of ε-caprolactone (CL) under solvent-free conditions, producing polycaprolactones (PCLs) of high crystallinity with molecular weights between 22,900 and 38,700 g mol−1 and decomposition temperatures above 260 °C. 1H NMR analysis demonstrated that the PCLs obtained were mainly linear, having hydroxymethylene groups at the chain ends. The results obtained indicated a significant improvement in terms of the ratio of monomer:initiator compared to related Cu(II) and Zn(II) complexes. In addition, the structures of the complexes 1 and 4 were determined by single-crystal X-ray diffraction. The synthesis and full characterization of all complexes are described in this paper.

A tetranuclear Sn(IV) 4-thiazolecarboxylate complex: synthesis, structure and catalytic behavior in the bulk ring-opening polymerization of glycolide

2016 ◽  
Vol 71 (8) ◽  
pp. 843-848 ◽  
Author(s):  
Jian Gao ◽  
Yu Yuan ◽  
Ai-Jun Cui ◽  
Feng Tian ◽  
Ming-Yang He ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Single Crystal ◽  
Ring Opening ◽  
Glycolic Acid ◽  
Average Molecular Weight ◽  
Ring Opening Polymerization ◽  
Number Average Molecular Weight ◽  
X Ray Diffraction ◽  
Catalytic Behavior ◽  
X Ray

AbstractThe reaction of 4-thiazolecarboxylic acid (Htzc) and dimethyltin(IV) dichloride with NaOH in mixed MeOH-H2O solvent led to the formation of a new Sn(IV) complex (Me2Sn)4(μ3-O)2(tzc)4 (1). Its structure has been characterized by elemental analysis, IR spectroscopy and single crystal and powder X-ray diffraction. Single-crystal X-ray diffraction revealed that complex 1 crystallizes in the monoclinic P21/c space group with Z = 2 and has a tetranuclear structure with crystallographically imposed centrosymmetry. The as-synthesized complex 1 was found to be active toward the bulk solvent-free polymerization of glycolide, producing poly(glycolic acid) with a number-average molecular weight up to 55.5 kDa.

scholarly journals Rapid four-component synthesis of dihydropyrano[2,3-c]pyrazoles using nano-eggshell/Ti(IV) as a highly compatible natural based catalyst

BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Arefeh Dehghani Tafti ◽  
Bi Bi Fatemeh Mirjalili ◽  
Abdolhamid Bamoniri ◽  
Naeimeh Salehi
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Reaction Times ◽  
Diffraction Field ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solvent Free Conditions ◽  
High Yields ◽  
Work Up

AbstractNano-eggshell/Ti(IV) as a novel naturally based catalyst was prepared, characterized and applied for the synthesis of dihydropyrano[2,3-c]pyrazole derivatives. The characterization of nano-eggshell/Ti(IV) was performed using Fourier Transform Infrared spectroscopy, X-ray Diffraction, Field Emission Scanning Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, and Thermo Gravimetric Analysis. Dihydropyrano[2,3-c]pyrazoles were synthesized in the presence of nano-eggshell/Ti(IV) via a four component reaction of aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate at room temperature under solvent free conditions. The principal affairs of this procedure are mild condition, short reaction times, easy work-up, high yields, reusability of the catalyst and the absence of toxic organic solvents.

scholarly journals A Versatile Approach to Access Trimetallic Complexes Based on Trisphosphinite Ligands

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 593
Author(s):  
Juan Miranda-Pizarro ◽  
Macarena G. Alférez ◽  
M. Dolores Fernández-Martínez ◽  
Eleuterio Álvarez ◽  
Celia Maya ◽  
...  
Keyword(s):  
Coordination Chemistry ◽  
Late Transition Metal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Full Characterization ◽  
Metal Precursors ◽  
Straightforward Method ◽  
One Step ◽  
Late Transition

A straightforward method for the preparation of trisphosphinite ligands in one step, using only commercially available reagents (1,1,1-tris(4-hydroxyphenyl)ethane and chlorophosphines) is described. We have made use of this approach to prepare a small family of four trisphosphinite ligands of formula [CH3C{(C6H4OR2)3], where R stands for Ph (1a), Xyl (1b, Xyl = 2,6-Me2-C6H3), iPr (1c), and Cy (1d). These polyfunctional phosphinites allowed us to investigate their coordination chemistry towards a range of late transition metal precursors. As such, we report here the isolation and full characterization of a number of Au(I), Ag(I), Cu(I), Ir(III), Rh(III) and Ru(II) homotrimetallic complexes, including the structural characterization by X-ray diffraction studies of six of these compounds. We have observed that the flexibility of these trisphosphinites enables a variety of conformations for the different trimetallic species.

The synthesis and polymerization behaviour of silicon-bridged [1]- and [2]ferrocenophanes with sterically demanding trimethylsilyl substituents attached to the cyclopentadienyl rings

1995 ◽  
Vol 73 (11) ◽  
pp. 2069-2078 ◽  
Author(s):  
Timothy J. Peckham ◽  
Daniel A. Foucher ◽  
Alan J. Lough ◽  
Ian Manners
Keyword(s):  
Molecular Weight ◽  
Ring Opening ◽  
Ring Opening Polymerization ◽  
Monoclinic Space Group ◽  
Organometallic Polymers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cyclopentadienyl Ligands ◽  
Sterically Demanding ◽  
High Molecular Weight Poly

The silicon-bridged [1]ferrocenophane Fe(η-C5H3SiMe3)2(SiMe2) (5) was synthesized via the reaction of Li2[Fe(η-C5H3SiMe3)2]•tmeda (tmeda = tetramethylethylenediamine) with Me2SiCl2 in hexanes. The disilane-bridged [2]ferrocenophane Fe(η-C5H3SiMe3)2(Si2Me4) (7) was prepared using a similar route from the disilane ClMe2SiSiMe2Cl. Despite the presence of sterically demanding SiMe3 substituents on the cyclopentadienyl rings, compound 5 was found to undergo thermal ring-opening polymerization at 170 °C to produce very soluble, high molecular weight poly(ferrocenylsilane) 6 with Mw = 1.4 × 105, Mn = 8.4 × 104. However, the [2]ferrocenophane 7 was found to be resistant to thermal ring-opening polymerization even at 350 °C and decomposed above 380 °C. A single-crystal X-ray diffraction study of 7 revealed that the steric interactions between the bulky SiMe3 groups are relieved by a significant twisting of the disilane bridge with respect to the plane defined by the centroids of the cyclopentadienyl ligands and the metal atom. The angle between the planes of the cyclopentadienyl rings in 7 was found to be 5.4(6)°, slightly greater than that in the non-silylated analogue Fe(η-C5H4)2(Si2Me4) (4a) (4.19(2)°), and dramatically less than the corresponding tilt angle of the strained, polymerizable, silicon-bridged [1]ferrocenophane Fe(η-C5H4)2(SiMe2) (1) (20.8(5)°). The length of the Si—Si bond in 7 (2.342(3) Å) was found to be close to the sum of the covalent radii (2.34 Å). Crystals of 7 are monoclinic, space group C2/c, with a = 23.689(3) Å, b = 11.174(1) Å, c = 31.027(3) Å, β = 109.16(1)°, V = 7758(2) Å3, and Z = 12. Keywords: ring-opening polymerization, ferrocenophane, organometallic polymers.

scholarly journals After 200 Years: The Structure of Bleach and Characterization of Hypohalite Ions by Single‐Crystal X‐Ray Diffraction

2021 ◽  
Author(s):  
Filip Topić ◽  
Joseph M. Marrett ◽  
Tristan H. Borchers ◽  
Hatem M. Titi ◽  
Christopher J. Barrett ◽  
...  
Keyword(s):  
Single Crystal ◽  
X Ray Diffraction ◽  
X Ray

Synthesis, Characterization and Optical Properties of PLA / P3HT Blends Thin Films

2021 ◽  
Vol 19 (5) ◽  
pp. 132-138
Author(s):  
Maan Abd-Alameer Salih ◽  
Q.S. Kareem ◽  
Mohammed Hadi Shinen
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spin Coating ◽  
Ring Opening ◽  
Energy Gap ◽  
Ring Opening Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conductivity Increase ◽  
Ft Ir

In this exploration Poly lactic corrosive (PLA) was orchestrated the ring-opening polymerization Poly lactic corrosive (PLA) blended with poly(3-hexylthiophene) (P3HT) which prepared by solution. Blends thin films Synthesis by spin coating technique and using Tetrahydrofuran (THF) as solvent. PLA powder was 'characterized by' 'X-ray' 'diffraction', '(FT-IR)'. pure Optical properties (PLA), (PLA)/P3HT blends thin films with different percentage of P3HT (0, 1, 2, and 3) wt% were investigated using UV-VS spectroscopy The results showed that the absorption, absorption coefficient, extinction coefficient and conductivity increase with increasing the rate of deformation P3HT, The energy gap decreases with increasing deformation.

scholarly journals Synthesis and Optoelectronic Properties of Iptycene–Naphthazarin Dyes

Synlett ◽  
2018 ◽  
Vol 30 (01) ◽  
pp. 54-58 ◽  
Author(s):  
Timothy Swager ◽  
Cagatay Dengiz ◽  
You-Chi Wu
Keyword(s):  
Single Crystal ◽  
Electronic Properties ◽  
Diels Alder ◽  
Optoelectronic Properties ◽  
Synthesis And Characterization ◽  
Nmr Analysis ◽  
X Ray ◽  
Vis Spectroscopy

We report the synthesis and characterization of iptycene–naphthazarin dyes by using a sequential Diels–Alder approach. The tautomerization of naphthazarin was used as the key step in the synthesis, with structures confirmed by single-crystal X-ray and NMR analysis. The systematic trends in electronic properties were investigated by UV/Vis spectroscopy. BF2 complexes of the dyes were prepared by reaction with BF3·OEt2 in CH2Cl2.

Synthesis, characterization, and structures of zircona- and boracyclosiloxanes with ferrocenyl substituents

2002 ◽  
Vol 80 (11) ◽  
pp. 1469-1480 ◽  
Author(s):  
Karena Thieme ◽  
Sara C Bourke ◽  
Juan Zheng ◽  
Mark J MacLachlan ◽  
Fojan Zamanian ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Ring Opening ◽  
Ring Opening Polymerization ◽  
The Novel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Multinuclear Nmr Spectroscopy

The novel zirconatetraferrocenylcyclotrisiloxane Cp2Zr(OSiFc2)2O (6), dizirconatetraferrocenylcyclotetrasiloxane [Cp2Zr(OSiFc2)O]2 (7), boratetraferrocenylcyclotrisiloxane (C6H5)B(OSiFc2)2O (8), and diboratetraferrocenylcyclotetrasiloxane [(C6H5)B(OSiFc2)O]2 (9) with ferrocenyl (Fc = Fe(η-C5H4)(η-C5H5)) substituents at silicon have been prepared from the reactions of Cp2Zr(NMe2)2 and PhBCl2 with diferrocenylsilanediol Fc2Si(OH)2 (3) and tetraferrocenyldisiloxanediol [Fc2SiOH]2O (5). The compounds were characterized by mass spectrometry, elemental analysis, UV–vis, IR, Raman, and multinuclear NMR spectroscopy, as well as single crystal X-ray diffraction. Thermogravimetric analysis and differential scanning calorimetry investigation of 6–9 showed that the cycles decompose before they can undergo any thermal ring-opening polymerization. In addition, no polymerization was detected in the presence of either KOSiMe3 or HOTf. The bulky ferrocenyl substituents on the Si atoms are likely to be at least partially responsible for the inability of these heterocycles to undergo ring-opening polymerization. Key words: heterocyclosiloxanes, ferrocenyl.

Synthesis and Characterization of Tetraphenylphosphonium Tetraazidoborate

2002 ◽  
Vol 57 (6) ◽  
pp. 621-624 ◽  
Author(s):  
Wolfgang Fraenk ◽  
Heinrich Nöth ◽  
Thomas M. Klapötke ◽  
Max Suter
Keyword(s):  
Single Crystal ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

AbstractTetraphenylphosphonium tetraazidoborate, [P(C6H5)4][B(N3)4], was obtained from B(N3)3 - in situ prepared from BH3 · O(C2H5)2 and HN3 - and [P(C6H5)4][N3]. Recrystallization from an acetonitrile / hexane mixture yielded colorless crystals in 60% yield. The molecular structurewas determined by single crystal X-ray diffraction and the [B(N3)4]- anionwas shown to possess S4 symmetry.

Sign in / Sign up

Export Citation Format

Share Document