scholarly journals Precise Dissolution Control and Bioavailability Evaluation for Insoluble Drug Berberine via a Polymeric Particle Prepared Using Supercritical CO2

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1198 ◽  
Author(s):  
Jingfu Jia ◽  
Kerong Zhang ◽  
Xue Zhou ◽  
Dan Zhou ◽  
Fahuan Ge
Keyword(s):  
Oral Bioavailability ◽  
Supercritical Co2 ◽  
Pharmaceutical Research ◽  
Particle Morphology ◽  
Aqueous Solubility ◽  
Dissolution Enhancement ◽  
Resonance Spectroscopy ◽  
Pharmacokinetic Studies ◽  
Scanning Calorimetry

It is still controversial whether poor aqueous solubility is the most primary reason for the low oral bioavailability of insoluble drugs. Therefore, in this study, berberine-loaded solid polymeric particles (BPs) of varied dissolution profiles with β-cyclodextrin (β-CD) as carrier were fabricated using solution-enhanced dispersion by supercritical fluids (SEDS), and the relationship between dissolution and berberine (BBR) bioavailability was evaluated. Dissolution property was controlled via particle morphology manipulation, which was achieved by adjusting several key operating parameters during the SEDS process. Characterization on BP using infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction indicated that BBR was dispersed in amorphous form, while nuclear magnetic resonance spectroscopy showed that methoxy groups of BBR were included into the cavities of β-CD. In vivo pharmacokinetic studies showed that oral bioavailability increased by about 54% and 86% when the dissolution rate of BBR was increased by 51% and 83%, respectively. The entry speed of BBR into the bloodstream was also advanced with the degree of dissolution enhancement. It seemed that dissolution enhancement gave positive effect to the oral bioavailability of berberine, but this might not be the crucial point. Meanwhile, supercritical CO2 technology is a promising method for pharmaceutical research due to its advantages in regulating drug-dosage properties.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

scholarly journals Enhancement of Aqueous Solubility, Dissolution Profile, and Oral Bioavailability of Pentoxifylline by Microsponges

2021 ◽  
Author(s):  
Anil Raosaheb Pawar ◽  
Nikhil Arun Shete ◽  
Priyanka Vitthal Jadhav ◽  
Vinayak Kashinath Deshmukh ◽  
Jaswandi Sameer Mehetre
Keyword(s):  
Drug Release ◽  
Oral Bioavailability ◽  
Aqueous Solubility ◽  
Diffusion Method ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release ◽  
Pure Drug

Microsponge, a novel drug delivery system, is designed to deliver a pharmaceutically active ingredient efficiently at the minimum dose. Microsponge plays an important role in enhancing drug stability, reducing side effects, and modifying drug release profiles. It is mostly used for transdermal delivery. Recent studies also explored their use for oral administration. This study aimed to explore the potential use of the microsponge technique in improving the aqueous solubility and dissolution profile of pentoxifylline (PTX). In this study, microsponges were prepared by a quasi-emulsion solvent diffusion method by varying concentrations of carriers. Nine different ratios of the PTX:Eudragit E-100 with varying amounts of dichloromethane were used. All formulated microsponges were evaluated for %production yield, compatibility of drug excipient, encapsulation efficiency, in vitro drug release, and in vivo bioavailability, as well as recorded by scanning electron microscopy (SEM) and differential scanning calorimetry(DSC). Our data suggested that the aqueous solubility of PTX microsponges was four times greater than that of pure drug. The in vitro drug release of selected microsponges (M8) was found to be 70%; furthermore, the in vivo study suggested that the selected formulation significantly enhanced drug concentration in the plasma (9,219 ng/mL in 12 hours) in comparison to pure drug PTX (2,476 ng/mL in 12 hours). SEM showed that the prepared microsponges were spherical with porous nature. Fourier-transform infrared spectroscopy and DSC studies confirmed an absence of incompatibility among drugs and selected excipients. The pH of the selected gel was found to be 6.8, which was compatible with those of skin and oral formulations also. All above data suggested a highly successful and beneficial use of the microsponge technique in enhancing aqueous solubility, dissolution profile, and oral bioavailability of PTX. Microsponge-based delivery of PTX may represent an alternative strategy to improve the bioavailability of the drug.

scholarly journals Improving the Solubilization and Bioavailability of Arbidol Hydrochloride by the Preparation of Binary and Ternary β-Cyclodextrin Complexes with Poloxamer 188

2021 ◽  
Vol 14 (5) ◽  
pp. 411
Author(s):  
Md. Khalid Anwer ◽  
Muzaffar Iqbal ◽  
Mohammad Muqtader Ahmed ◽  
Mohammed F. Aldawsari ◽  
Mohd Nazam Ansari ◽  
...  
Keyword(s):  
Antiviral Agent ◽  
Aqueous Solubility ◽  
Phase Solubility ◽  
Pharmacokinetic Studies ◽  
Solubility Curve ◽  
Cyclodextrin Complexes ◽  
Poloxamer 188 ◽  
The Stability

In the current study, the effect of poloxamer 188 on the complexation efficiency and dissolution of arbidol hydrochloride (ADL), a broad-spectrum antiviral agent, with β-cyclodextrin (β-CD) was investigated. Phase solubility studies confirmed a stoichiometry of a 1:1 ratio for both ADL:β-CD and ADL/β-CD with a 1% poloxamer 188 system with an AL type of phase solubility curve. The stability constants (K1:1) calculated from the AL type diagram were 550 M-1 and 2134 M-1 for AD:β-CD and ADL/β-CD with 1% poloxamer 188, respectively. The binary ADL/β-CD and ternary ADL/β-CD with 1% poloxamer 188 complexes were prepared by kneading and a solvent evaporation method and were characterized by aqueous solubility, FTIR, PXRD, DSC and SEM in vitro studies. The solubility (13.1 fold) and release of ADL were markedly improved in kneaded ternary ADL/β-CD with 1% poloxamer 188 (KDB). The binding affinity of ADL and β-CD was confirmed by 1H NMR and 2D ROSEY studies. The ternary complex (KDB) was further subjected for in vivo pharmacokinetic studies in rats and a significant improvement in the bioavailability (2.17 fold) was observed in comparison with pure ADL. Therefore, it can be concluded that the solubilization and bioavailability of ADL can be remarkably increased by ADL/β-CD complexation in the presence of a third component, poloxamer 188.

scholarly journals PREPARATION AND CHARACTERIZATION OF NANOCRYSTALS FOR SOLUBILITY AND DISSOLUTION RATE ENHANCEMENT OF PALIPERIDONE USING DIFFERENT HYDROPHILIC CARRIERS: IN VITRO-IN VIVO STUDY

2018 ◽  
Vol 11 (4) ◽  
pp. 393
Author(s):  
Moon Rajkumar ◽  
Gattani Surendra
Keyword(s):  
Dissolution Rate ◽  
Antipsychotic Agent ◽  
Aqueous Solubility ◽  
In Vivo Study ◽  
Scanning Calorimetry ◽  
Antisolvent Precipitation ◽  
Enhanced Solubility ◽  
Pure Drug

 Objective: The objective of this study was to increase the solubility and dissolution rate of paliperidone (PAL) by preparing its nanocrystals using different hydrophilic carriers by antisolvent precipitation technique.Methods: The nanoparticles (NP) were characterized for aqueous solubility, drug content, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, particle size, and in vitro-in vivo analysis.Results: The results showed improved solubility and dissolution rate of NPs when compared to pure drug and physical mixture (PM). Solubility data showed a linear graph giving an indication that there is a gradual increase in the solubility profile of the drug with an increase in concentration of the carriers. At highest concentration, the solubility of NPs with Plasdone S630, Povidone K-25, and PVP K-30 found to be increased by 12 folds, 9 folds and 6 folds, respectively, as compared to pure drug. The release profile of NPs with Plasdone S630 in terms of dissolution efficiency at 60 min (DE60), initial dissolution rate (IDR), amount release in 15 min (Q15 min), and time for 75% release (t75%) shows better results when compared to pure drug, PM, and also NPs with povidone 25 and povidone 30. In vivo study reveals that optimized NPs elicited significant induction of cataleptic behavior which is the indication of antipsychotic agent(s) effect.Conclusion: The process antisolvent precipitation under constant stirring may be a promising method to produce stable PAL NPs with markedly enhanced solubility and dissolution rate due to nanonization with the increased surface area, improved wettability, and reduced diffusion pathway.

Enhanced oral bioavailability of nisoldipine-piperine-loaded poly-lactic-co-glycolic acid nanoparticles

2017 ◽  
Vol 6 (6) ◽  
pp. 517-526 ◽  
Author(s):  
Permender Rathee ◽  
Anjoo Kamboj ◽  
Shabir Sidhu
Keyword(s):  
Oral Bioavailability ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Pharmacokinetic Interaction ◽  
Precipitation Method ◽  
Pharmacokinetic Studies ◽  
Average Particle

AbstractBackground:Piperine helps in the improvement of bioavailability through pharmacokinetic interaction by modulating metabolism when administered with other drugs. Nisoldipine is a substrate for cytochrome P4503A4 enzymes. The study was undertaken to assess the influence of piperine on the pharmacokinetics and pharmacodynamics of nisoldipine nanoparticles in rats.Methods:Optimization studies of nanoparticles were performed using Taguchi L9 orthogonal array, and the nanoparticles were formulated by the precipitation method. The influence of piperine and nanoparticles was evaluated by means of in vivo kinetic and dynamic studies by oral administration in rats.Results:The entrapment efficiency, drug loading, ζ potential, and average particle size of optimized nisoldipine-piperine nanoparticles was 89.77±1.06%, 13.6±0.56%, −26.5 mV, and 132±7.21 nm, respectively. The in vitro release in 0.1 n HCl and 6.8 pH phosphate buffer was 96.9±0.48% and 98.3±0.26%, respectively. Pharmacokinetic studies showed a 4.9-fold increase in oral bioavailability and a >28.376±1.32% reduction in systemic blood pressure by using nanoparticles as compared to control (nisoldipine suspension) in Wistar rats.Conclusion:The results revealed that piperine being an inhibitor of cytochrome P4503A4 enzymes enhanced the bioavailability of nisoldipine by 4.9-fold in nanoparticles.

Enhanced Oral Bioavailability and Improved Biological Activities of a Quercetin/Resveratrol Combination Using a Liquid Self-Microemulsifying Drug Delivery System

Planta Medica ◽  
2020 ◽  
Author(s):  
Patcharawalai Jaisamut ◽  
Subhaphorn Wanna ◽  
Surasak Limsuwan ◽  
Sasitorn Chusri ◽  
Kamonthip Wiwattanawongsa ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Oral Bioavailability ◽  
Biological Activities ◽  
Area Under The Curve ◽  
Aqueous Solubility ◽  
The Self

AbstractBoth quercetin and resveratrol are promising plant-derived compounds with various well-described biological activities; however, they are categorized as having low aqueous solubility and labile natural compounds. The purpose of the present study was to propose a drug delivery system to enhance the oral bioavailability of combined quercetin and resveratrol. The suitable self-microemulsifying formulation containing quercetin together with resveratrol comprised 100 mg Capryol 90, 700 mg Cremophor EL, 200 mg Labrasol, 20 mg quercetin, and 20 mg resveratrol, which gave a particle size of 16.91 ± 0.08 nm and was stable under both intermediate and accelerated storage conditions for 12 months. The percentages of release for quercetin and resveratrol in the self-microemulsifying formulation were 75.88 ± 1.44 and 86.32 ± 2.32%, respectively, at 30 min. In rats, an in vivo pharmacokinetics study revealed that the area under the curve of the self-microemulsifying formulation containing quercetin and resveratrol increased approximately ninefold for quercetin and threefold for resveratrol compared with the unformulated compounds. Moreover, the self-microemulsifying formulation containing quercetin and resveratrol slightly enhanced the in vitro antioxidant and cytotoxic effects on AGS, Caco-2, and HT-29 cells. These findings demonstrate that the self-microemulsifying formulation containing quercetin and resveratrol could successfully enhance the oral bioavailability of the combination of quercetin and resveratrol without interfering with their biological activities. These results provide valuable information for more in-depth research into the utilization of combined quercetin and resveratrol.

scholarly journals Atorvastatin calcium loaded chitosan nanoparticles: in vitro evaluation and in vivo pharmacokinetic studies in rabbits

2015 ◽  
Vol 51 (2) ◽  
pp. 467-477 ◽  
Author(s):  
Abdul Baquee Ahmed ◽  
Ranjit Konwar ◽  
Rupa Sengupta
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Oral Bioavailability ◽  
Chitosan Nanoparticles ◽  
Rabbit Model ◽  
Pharmacokinetic Studies ◽  
Release Formulation ◽  
Atorvastatin Calcium

<p>In this study, we prepared atorvastatin calcium (AVST) loaded chitosan nanoparticles to improve the oral bioavailability of the drug. Nanoparticles were prepared by solvent evaporation technique and evaluated for its particle size, entrapment efficiency, zeta potential, <italic>in vitro</italic> release and surface morphology by scanning electron microscopy (SEM). In addition, the pharmacokinetics of AVST from the optimized formulation (FT5) was compared with marketed immediate release formulation (Atorva<sup>(r))</sup> in rabbits. Particle size of prepared nanoparticles was ranged between 179.3 ± 7.12 to 256.8 ± 8.24 nm with a low polydispersity index (PI) value. Zeta potential study showed that the particles are stable with positive values between 13.03 ± 0.32 to 46.90 ± 0.49 mV. FT-IR studies confirmed the absence of incompatibility of AVST with excipient used in the formulations. <italic>In vitro</italic> release study showed that the drug release was sustained for 48 h. Results of pharmacokinetics study showed significant changes in the pharmacokinetic parameter (2.2 fold increase in AUC) of the optimized formulation as compared to marketed formulation (Atorva<sup>(r))</sup>. Thus, the developed nanoparticles evidenced the improvement of oral bioavailability of AVST in rabbit model.</p>

scholarly journals Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(l–lactide) (PLLA)–Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerization

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1123 ◽  
Author(s):  
Hui Liang ◽  
Yun Zhao ◽  
Jinjun Yang ◽  
Xiao Li ◽  
Xiaoxian Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Oxide ◽  
Bone Repair ◽  
In Situ Polymerization ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry ◽  
Biomedical Material ◽  
In Vivo Degradation

The present work focuses on the preparation of poly(l–lactide)–magnesium oxide whiskers (PLLA–MgO) composites by the in-situ polymerization method for bone repair and implant. PLLA–MgO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and solid-state 13C and 1H nuclear magnetic resonance spectroscopy (NMR). It was found that the whiskers were uniformly dispersed in the PLLA matrix through the interfacial interaction bonding between PLLA and MgO; thereby, the MgO whisker was found to be well-distributed in the PLLA matrix, and biocomposites with excellent interface bonding were produced. Notably, the MgO whisker has an effect on the crystallization behavior and mechanical properties; moreover, the in vivo degradation of PLLA–MgO composites could also be adjusted by MgO. These results show that the whisker content of 0.5 wt % and 1.0 wt % exhibited a prominent nucleation effect for the PLLA matrix, and specifically 1.0 wt % MgO was found to benefit the enhanced mechanical properties greatly. In addition, the improvement of the degrading process of the composite illustrated that the MgO whisker can effectively regulate the degradation of the PLLA matrix as well as raise its bioactivity. Hence, these results demonstrated the promising application of PLLA–MgO composite to serve as a biomedical material for bone-related repair.

scholarly journals Preparation and Evaluation of Topically Applied Azithromycin Based on Sodium Hyaluronate in Treatment of Conjunctivitis

Pharmaceutics ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 183
Author(s):  
Chen ◽  
Yin ◽  
Ma ◽  
Tu ◽  
Shen
Keyword(s):  
Acute Toxicity ◽  
Hydroxypropyl Methylcellulose ◽  
Sodium Hyaluronate ◽  
Drug Formulation ◽  
Resonance Spectroscopy ◽  
Eye Drops ◽  
Scanning Calorimetry ◽  
Eye Irritation

Azithromycin (AZI) eye drops containing sodium hyaluronate (SH) were developed to improve the bioavailability of AZI. Interaction between AZI and SH in the AZI-SH formulation was investigated by differential scanning calorimetry, X-ray diffraction, and 1H-nuclear magnetic resonance spectroscopy analyses. Moreover, advantages of using SH as an excipient were investigated by comparing physiological properties and pharmacokinetic behaviors of SH-containing AZI eye drops with that of hydroxypropyl methylcellulose (HPMC)-containing formulation. In addition, safety of the developed AZI-SH eye drops was evaluated by in vitro 3-(4,5-dimethyl-2-Thiazyl)-2, 5-diphenyl-2H-tetrazolium bromide assay (MTT assay) and neutral red uptake assay as well as in vivo eye irritation test and acute toxicity test. The results indicated that AZI formed a complex with SH under a slightly acidic condition. The area under the curve (AUC) of AZI in SH-containing formulation was 1.58-fold higher (P<0.01) than that in HPMC-containing formulation due to the interaction between the amine group of AZI and the carboxyl group of SH, despite of the higher viscosity of HPMC-containing formulation. Safety evaluation showed that AZI-SH eye drops caused no obvious eye irritation and acute toxicity. In conclusion, the developed SH-containing AZI formulation possessing advantages of longer retention time and higher drug availability was a promising drug formulation for topical ocular therapy.

Development and Characterization of the Neuroregenerative Xanthohumol C/Hydroxypropyl-β-cyclodextrin Complex Suitable for Parenteral Administration

Planta Medica ◽  
2019 ◽  
Vol 85 (16) ◽  
pp. 1233-1241
Author(s):  
Michael Kirchinger ◽  
Lara Bieler ◽  
Julia Tevini ◽  
Michael Vogl ◽  
Elisabeth Haschke-Becher ◽  
...  
Keyword(s):  
Water Solubility ◽  
Pharmaceutical Research ◽  
Water Soluble ◽  
Complexing Agents ◽  
Cyclodextrin Complex ◽  
Scanning Calorimetry ◽  
In Vivo Experiments ◽  
Strong Candidate

AbstractThe chroman-like chalcone Xanthohumol C, originally found in hops, was demonstrated to be a potent neuroregenerative and neuroprotective natural product and therefore constitutes a strong candidate for further pharmaceutical research. The bottleneck for in vivo experiments is the low water solubility of this chalcone. Consequently, we developed and validated a suitable formulation enabling in vivo administration. Cyclodextrins were used as water-soluble and nontoxic complexing agents, and the complex of Xanthohumol C and 2-hydroxypropyl-β-cyclodextrin was characterized using HPLC, HPLC-MS, NMR, and differential scanning calorimetry. The water solubility of Xanthohumol C increases with increasing concentrations of cyclodextrin. Using 50 mM 2-hydroxypropyl-β-cyclodextrin, solubility was increased 650-fold. Furthermore, in vitro bioactivity of Xanthohumol C in free and complexed form did not significantly differ, suggesting the release of Xanthohumol C from 2-hydroxypropyl-β-cyclodextrin. Finally, a small-scaled in vivo experiment in a rat model showed that after i. p. administration of the complex, Xanthohumol C can be detected in serum, the brain, and the cerebrospinal fluid at 1 and 6 h post-administration. Mean (± SD) Xanthohumol C serum concentrations after 1, 6, and 12 h were determined as 463.5 (± 120.9), 61.9 (± 13.4), and 9.3 (± 0.8) ng/mL upon i. v., and 294.3 (± 22.4), 45.5 (± 0.7), and 13 (± 1.0) ng/mL after i. p. application, respectively. Accordingly, the formulation of Xanthohumol C/2-hydroxypropyl-β-cyclodextrin is suitable for further in vivo experiments and further pharmaceutical research aiming for the determination of its neuroregenerative potential in animal disease models.

Sign in / Sign up

Export Citation Format

Share Document